RT61, connects, gets ip from dhcp but no traffic gets trough

Here we go again. I bought D-Link DWL-G630 wireless pcmcia card which has RT61 chipset. I installed latest rt2x00-cvs and rt2x00-rt61-fw from core. My network manager sees wireless networks, I can connect to mine (WPA2 AES) I even get ip from router. Link light is on and act light blinks everytime when I try to ping. Modules seemed to load automatically, lsmod sees rc80211_simple, rt61pci, rt2x00pci rt2x00lib, mac80211 cfg80211 eeprom_93cx6. dmesg tells about succesful authentication and association. Only weird thing I can see is Bit rate=1Mb/s even though link quality = 60/100. I dont have any iptables stuff in use. I cannot even ping my gateway.

Hi Alain,
Seems my router has no option for router traffic
ip inspect name REMEMBER       bootpc ?
alert        Turn on/off alert
audit-trail Turn on/off audit trail
timeout      Specify the inactivity timeout time
But i applied ACL on inside to allow
permit udp any any eq bootpc
that fixed the issue.
Many thanks for answering the questions and letting me know about router traffic option.
Regards
MAhesh

Similar Messages

2 out 100 iPads can't get IP from DHCP

Hi,
The school were I worked use 100 iPad 3 for students (they were bought at the same time); Out of 100 iPads being used, 2 is always having problem getting IP from DHCP (connected but did not get IP or some random IP), We used a mixed of Linksys E3000, E4500, and a couple of old Linksys WRT54G routers, we are using hidden SSID and WEP
once in a while (if I try to disconnect/reconnect enough times) it will get IP from DHCP, but after a few days, the problem will appear again
I don't have a say on the use of hidden SSID and the usage of the aging WEP protocol, and the other 98 iPads were not having any problem connecting to those routers
I have tried updating the iPad, reset network settings, reset all settings, and even restoring the 2 iPads, and they were still having problem getting IP from DHCP
Those iPads have no problem connecting to the internet if the IP is made static (well today, one iPad can connect to the internet, but can't browse? is it DNS problem)
Can I claim to Apple Authorized Service Provider? (no Apple Store here), since if they test it I'm pretty sure the iPad will connect to their WiFi (seems like the student have no problem connecting at their WiFi at home, just not at school (which is troublesome))
I read somewehere that certain iPads are not compatible with some routers, is it true
any suggestions

With the static ip address try:
Google provides free dns lookup. Their numbers are:
8.8.8.8
8.8.4.4
I'd take the issue up with apple.
Sneak in another router that works with the devices.
Robert

IPV6 clients cannot ping each other while getting IP from DHCP server running in windows 2008

I have two windows 7 clients and a windows 2008 server connected to a switch with static IP 172:16:5::1/64.
DHCP server is configured with static IP 172:16:5::20/64
when i statically assign IP to windows 7 clients like 172:16:5::21 & ::22, they can ping each other. if they get ip from DHCP server, they cannot ping each other.
if i configure the gateway (172:16:5::1) in the clients manually, they can ping each other.
is there any way we can make dhcp server to give gateway to the clients along with IP?

From what I have gathered:
IPv6 won't route because the DHCP server is setup in 'stateless' mode and the switches do not support IPv6. (
"But if your routers are not IPv6 supported (yet), you can
reconfigure DHCPv6 to Disable Stateless mode, and that'll issue IPv6 addresses that
will eliminate the Ping problem." -
http://www.networkworld.com/article/2228461/microsoft-subnet/setting-up-dhcpv6-to-dynamically-issue-ipv6-addresses-in-a-network.html)
So you must change to 'disable stateless' mode. Which the only way I can THINK to do this is to uninstall DHCP and reinstall DHCP and select 'disable stateless' during the installation (which I haven't confirmed). (In
case, “Disable DHCPv6 stateless mode for this server” option was selected duringrole installation" -
http://blogs.technet.com/b/teamdhcp/archive/2009/03/03/dhcpv6-understanding-of-address-configuration-in-automatic-mode-and-installation-of-dhcpv6-server.aspx)
zz.. but my understanding of DHCP is fragmented, please take what I find with a grain of salt. I am off to reinstall DHCP :] .. fun.
Mediocre Access 2010 | (Baby) Beginner C Sharp | OK at Active Directory (2012) | Fragmented understanding of DNS/DHCP | Laughable experience with Group Policy | Expert question asker on MSDN Forums

I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?

I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?

Hi
And if You change view - in main "window/view field" so that You see the box-plot structure.
No exclamation marks there either ?
and non at the front page ?
iDVD do not copy Your material - only points to where it is stored. So if on any external hard disks, USB-memories, CDs or DVDs are missing - assetts are broken.
Or if You changed location of any material or directed iPhoto or iTunes or GarageBand to a new Library - Then iMovie/iDVD also get's lost.
Yours Bengt W

Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from l

Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from lightroom?

In the printer driver (accessed through the Page Setup button) set the Advanced tab to borderless. Then in the right hand panel under Layout set all the margins to zero.

I have an iphone 4 I can get texts from all but I person. Why? They can get mine

I have an iphone4 I can get texts from everyone but one person. They can get mine. This started all of a sudden. Any suggestions?

the mute button is a switch you need to flip, not touch. if you look at it and see color, its on.

Hello, trying to download the latest iTunes software version, a pop up comes with a "invalid signature" message. Try to do download only with the same results. I can buy and download from iTunes but can't get the latest version?

Hello, trying to download the latest iTunes software version, a pop up comes with a "invalid signature" message. Try to do download only with the same results. I can buy and download from iTunes but can't get the latest version?

Transfer Purchases = iTunes > File > Transfer Purchases
http://support.apple.com/kb/HT1848

I can't download songs from itunes directly to my iphone. I'm getting credit removed from account but all i get is 'waiting' beside the download song.

I can't download songs from itunes directly to my iphone. I'm getting credit removed from account but all i get is 'waiting' beside the download song.

Sorry I somehow managed to click the wrong thing and made a silly mistake, as I had hoped.
Can a moderator please remove this thread as I have resolved my problem.
Kind regards,
Ryan.

TS1559 I have bought iphone 4 from thiland but i dont get any warranty paper

I have bought iphone 4 from thiland but i dont get any warranty paper now how can i get warrenty from bangladesh. I have face problem my i phone lower speaker is broke down. how is it i solve my problem from bangladesh.
Thank you
<Personal Information Edited By Host>

Did you already register your product with Apple?
if yes, log in with your serial number here and request a repair:
https://selfsolve.apple.com/agreementWarrantyDynamic.do

Am trying to get my iCloud going but i never get the email confirmation?? what can i do

am trying to get my iCloud going but i never get the email confirmation??
does anybody know what can i do??

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(100917)

I recently purchased an Onkyo stereo receiver with a wireless USB adapter, UWF-1, and want to stream audio from my MacBook Pro through my stereo system. The receiver tells me it is connected to my wireless LAN, but I cannot get music to play?

New to the community here, thanks for your patience. I recently purchased an Onkyo TX-8050 Network Stereo Receiver with the UWF-1 USB adapter with the intent to stream audio from my MacBook Pro to the stereo. I have gone through the setup instructions for the adapter and the receiver gives me a message saying that it is connected to the password protected network, but that is as far as I can get.
I have gone into iTunes and clicked on the "Open Stream" option, but I just get a pop up box labeled "URL" that is empty. I have Home Sharing turned on and File Sharing turned on, but I am not seeing the receiver in my Finder window or as a iTunes device.
I would appreciate any and all advice and assistance.
Thanks so much.
Dan

So I have been searching the iStore for Airplay and I find lots of information about what it is, but nothing about how much it costs, how/where to buy it, etc.?
Fortunately, AirPlay does not cost anything as it is a streaming protocol used by Apple. Currently, the AirPort Express and Apple TV are AirPlay-ready. A number of other companies, like JBL, iHome, Denon and Klipsch are also rumored to be working on AirPlay versions of their products.
Your other option would be to get an AirPort Express and connect it to your Onkyo analog or optical digital audio input and stream from iTunes that way. I currently do this with my 10+ year old Harmon Kardon HT receiver.

Establish IP from DHCP but no Internet or Extremely Slow

Synopsis: Net Macmin, New Ethernet Cat 6 cable (approx. 90 ft), DSL Comtrend Router. IP Connects, slow to no internet.
Added a 90' cable and ends across store basement from front PC to router in rear of business. Standard non-crossover Cat 6 cable properly crimped. Get IP Address from DHCP on front MacMini but internet is extremely slow. I re-ran the cable away from parallel to power conduit, still extremely slow. The light on the port which this cable is plugged in flashes at high rate with no pause, unlike three other connected to router.
Front MacMini works fine over wifi, but retail software recommended ethernet connection to ensure reliability should interference occur over wifi. When I'm testing the Ethernet I do shut off the wifi and have, since started testing, changed the service order so wifi is second chosen to ensure tesitng with ethernet is accurate when wifi is on.
When you try to load a webpage (I used google) through safari it loads 25% of the load bar and stops until it times out a few second later. Used network utility to verify connection to goolge, it took a few seconds longer than wifi but was able to ping google. I don't own a ethernet tester and would rather not buy one for one project.
Based on the ability to connect with IP address tells me the cable is able to talk back and forth with the router, correct? I've read a lot about ethernet port issues, how common is this, what else could be causing the problem?
Internet Source: MyFairPoint DSL for Business
Network Hardware: Comtrend AR-5381u DSL Router
Other Hardware on Router: Second MacMini, Dell Tower, Color HP LaserJet
Thank you to whomever can help and everyone that lends feedback!

My plan is to bring my MBP to the shop later this week to test this out. I wanted to put this out there to see if any other troubleshooting ideas were brought up. Thanks for the input!

NOT GETTING IP FROM DHCP SERVER

hello,
i setup a dhcp pool in my distribution switch which is directly connected to my access.
distribution ip to access is :int gi1/0/1 :192.168.250.1
accesss ip to distribution is int gi 1/0/1 : 192.168.250.2
they can ping each other. but the pc cannot get ip from the distribution switch. what might be the problem of this?
my distribution switch configuration for dhcp pool is:
ip dhcp pool vlan 247
network 10.60.247.0 255.255.255.0
default router 10.60.247.2
my access switch config is
int vlan 247
ip add 10.60.247.4 255.255.255.0
ip helper address 192.168.250.1
thank you and best regards...

hello,i setup a dhcp pool in my distribution switch which is directly connected to my access.distribution ip to access is :int gi1/0/1 :192.168.250.1accesss ip to distribution is int gi 1/0/1 : 192.168.250.2they can ping each other. but the pc cannot get ip from the distribution switch. what might be the problem of this?my distribution switch configuration for dhcp pool is:.ip dhcp pool vlan 247 network 10.60.247.0 255.255.255.0default router 10.60.247.2my access switch config isint vlan 247ip add 10.60.247.4 255.255.255.0ip helper address 192.168.250.1thank you and best regards..
Hi,
What is the model of the switch and vlan247 host are able to ping the 192.168.250.1 and check out the below link for configuring DHCP in routers and switches.
http://articles.techrepublic.com.com/5100-10878_11-5690240.html
Hope to Help !!
Ganesh.H
If helpful do rate the post

SRW2024 not getting IP from dhcp

Hi,
I'm have installed a SRW2024 switch in my home office. I've connected via hyperterminal and changed the ip address mode to "dhcp client". But i'm not getting an ip address from the dhcp server.
Is there something else I must do or setup on the switch? the DHCP server has been running without problem for some time now, all my other devices can get an ip without problems...
Thanks,
Koen

Khan,
The problem of users not getting IP from the DHCP usually happens when 'spanning-tree portfast' is not enabled on access ports. PCs don't wait long enough for DHCP responses and time out.
Can you make sure all the access ports, to which the users are connected to, have spanning tree portfast enabled.
HTH,
Sundar

LAN was down ie Users are not getting ip from DHCP server after enabling DHCP snooping

Hi All ,
Enclosed file has network connectivity diagram.
1. L3 vlan's ie 2,3,4,5 and 6 are configured on ACC-CR1 and ACC-CR2.
2.Trunk is configured between Core switches ( CR1 and CR2) and access switches .VTP mode is transparent on all switches.L2 vlans are configured on all access switches.
3.DHCP is server is located at different location and is reachable over MPLS.
Without enabling dhcp snooping , users connected to access switches (Sw1,sw2,sw3 and Sw4 ) are getting ip address from DHCP server without any problem and everything is working fine.
But users connected to Sw3 and Sw4 are getting ip address from rouge DHCP server which is not pingable from any one of the switch.
So we have configured DHCP snooping for all vlan's on CR1 , CR2 , SW3 and SW4 and "trusted uplink ports" which are connected to WAN routers from CR1 and CR2 and also "trusted uplink ports " of Sw3 and Sw4 which are connected to CR1 and CR2.
As soon we have enabled DHCP snooping and trusted respective uplink ports , users are not getting ip address from remote DHCP server and even users connected to Sw1 and SW2 are facing same issue.
Note : DHCP snooping is not configured on SW1 and SW2.
Why users are not getting ip address from remote DHCP server as soon as we enabled dhcp snooping on Core switches and two access switches ie sw3 and sw4 ? what could have caused DHCP packets to be dropped ? Any idea would be appreciated .

Hi,
as you say: " HSRP is configured between CR1 and CR2 and Vlans are active on CR1" does it mean there are L3 intrefaces configured in each VLAN on your CR switches and ip hepler-address pointing to the remote DHCP server is configured on each of them?
I know it's difficult in a productive environment but IMHO you need to find out where are the DHCP offers dropped.
Either by enabling DHCP debugging or by capturing packets via Wireshark, e.g.
Best regards,
Milan

RT61, connects, gets ip from dhcp but no traffic gets trough

Similar Messages

Maybe you are looking for