RTC-5161 and RPE-02075 issue... again.
Hi,
I posted a thread on the Workflow forum because I don't know if it's an OWB or a Workflow issue.
RPE-02083 again with OWB and Workflow
Thank you
All,
I've tried to create one OWF_MGR for each of process flow modules with using Workflow Configuration Assistance for examples : owf_mgr (default) for first process flow module, then owf_mgr_2 for second process flow module etc.
After creating many OWF_MGR, then grant all of OWF_MGRxxx to have OWB_O_OWBOWNER roles.
After that, make Oracle Workflow location in Design Centre for each of OWF_MGRxxx than configure each of process flow module to there.
Hopefully it will solve this problem.
Regards,
Arsyad
Similar Messages
-
Process Flow deployment - getting RTC-5161 (10gR2)
I am trying to deploy a process flow and getting:
"RTC-5161: The Deployment cannot proceed because of an error during the generation or pre-deployment phase. ....."
Has anybody else experienced this? Right I am not sure what the problem might be. There is a new note on metalink (375296.1) about OWF_MGR setup, but I think my issue is something else...
JulianHello!
I searched metalink on error RTC-5161 and found a reference in note 392263.1
It is a bug but there is a patch available ( bug 5504848, patch number 5525337).
Read the note on metalink to check if you really hit this bug and apply the patch.
Regards,
Robert -
I need help my iPhone kicked me out of my email and it's telling me my password wrong! I know I'm putting in my password is right but it's still not working please help
Hello Jodi216,
It sounds like you are unable to access your email in the mail account becuase you are being told the password is incorrect, and you have removed the email account and re added it. I recommend starting by deleting the mail account as you had before. Then close the open apps on your phone:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that and restart the phone and test the issue by signing back into the account in Settings, and testing the issue again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If it persists, I would next backup your device to iTunes with this article:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
And restore it from your backup with this article to delete the current iOS 7 installation and install a fresh copy:
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414
Thank you for using Apple Support Communities.
Take care,
Sterling -
Today, my iPhone calendar entries are changing from green to blue and back to green again. Anyone else having this issue?
No, never had the problem.
-
HI. I've got an issue with Pages running on Mavericks. Everytime I open it up it just hangs right there and I can't do anything with it. I've deleted the app and installed it back again but the problem sitll persists. Any help please?
Thank you so much for helping,
But i really wonder how you did that. did you always switch between design view and preview view, then change the key position for 2px then switch back, to align the four letters? because i imagine that can get really frustrating, if you have a logo consisting of 58 parts instead of 4!:)
Anyway thank you very much for your time and effort!!!! -
When I open my mail account I keep getting the message "Checking for Mail". I deleted the yahoo account and set it up again and I am still getting the same issue plus I am not seeing any of my mail or folders. Can anyone help?
This is how I fixed it on my new iPhone 5S. Using the standard yahoo setting on my phone.
You will have to access "managing your app passwords" on your account profile for yahoo. Generate password for your app. For example: "My iPhone 5S'
Go to your Iphone and set up your yahoo mail account on your phone the normal way and you have to use the generated password. instead of the yahoo account password.
source:
http://virtualizeme.net/iphone-5-yahoo-mail-server-unavailable-fix/
I hope this helps,
cheers -
I had an App on MacBook Air which would cause my computer to be locked. I delted it and reinstalled the App again from the AppStore. Now I am being charged again for the same App. How can I correct this issue and get refund for the double billing?
You can't gift it, gifting can only be done from within the store, not from within your library.
Puchases are considered final but you can try the 'report a problem' link to contact iTunes Support and see if they will refund or credit you : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
My iPhone 4 randomly was lighting up without touching it even would do it continiusly while it was locked; then will stop and 2 min later would do the issue again.I have 5.1.1 ios installed in it and I even try to recover it , still the problem is not solved , Thou when I put the phone on charging than the display light does not glow again and again. Kindly help to solve this issue.
If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar -
The red X has appeared in my Ipod Classic Screen. Apple support tells me that I need to first put it manually on disk mode. to put it on disk mode I ought to press menu and select buton togeher, when the apple sign shows up, hold select button and play together.
After pressing Menu and Select, when the Apple sign appears, I immediately press select and play/pause, but again the red X sign appears. so it does not go to Disk Mode. Has anyone had this issue? I would be grateful if you could tell me what to do.Thank you everyone for the replies. It defiantly helped point me in the right direction. With any luck, I will have my replacement phone sometime tomorrow.
I was able to call the iPhone support line this morning. The Apple rep stayed on the line with me for about an hour until he was sure the new phone would ship out. For $199 plus $29 for expedited handling I was able to get the replacement ordered with overnight shipping. Since the replacement doesn’t involve ATT&T I have no reason to suspect any further delays. Kudos to the Apple rep that helped me straighten out this mess.
It’s a shame that AT&T cares so little for their existing customers. Not only did they try to sell me the same phone for $499, they outright refused to help me. They also lied to me on numerous occasions and strung me along for close to three weeks for something that only took an hour to complete with the Apple rep.
I filed a formal complaint against AT&T through the Better Business Burrow as well as requested a review of our cooperate contract with AT&T. Our company currently has over 3000 phones with AT&T and there contract comes up for bid the end of our fiscal year (this October). We will be giving it heavy consideration before we consider renewing their contract.
I doubt that any of that will matter to a company that cares so little about their customers, but you never know.
Thanks again for all your help. I would probably still be trying to get my replacement for the next few months if it wasn’t for your suggestions.
-Niel -
Time Capsule issues again, and again!
I have had so many problems with my TC, it has kept on stopping my backups so regularly, started of by saying that it had to start a new backup after 'Verification', another 60GB+ backup, lasting more than 24 hours. I have had the TC replaced completely and started from scratch again.
Now my TC has been nacking up since 24th April and now giving me the same message of 'after Verification' it has to start a new backup, either 'Start Now' or 'Later'. If I start now it does a 60GB+ new backup and wipes out all of my data backups from my Time Machine.
I have spoken to the Tech support guys so many times, I now feel like saying that I want a refund and take it back; what's the point of doing all these backups over a number of months, to lose them all because it's not fit for yje purpose designed!!
Please somebody from Apple take charge and rectify these problems....
Very disappointed Apple user
Batch108Batch108 wrote:
Do you know how I change the channel on the TimeMachine?
First, see what channels are in use by those other networks. Pick one with some room on either side. Unfortunately, there may be other networks iStumbler can't see, so you may have to try several.
Use Airport Utility > Manual Setup > Wireless. Select Manual for Radio Channel Selection, then click Edit.
How far is your TC from your iMac? If you can connect to it via Ethernet, it will be much faster (2-3 times), and far more reliable than WIFI (and you don't need to fool with channels, unless there's also a wireless device on your network).
Is it also just a matter of using my TC with CCC, just re-formatting it and configuring it to be used (it’s a 1TB)?
No. CCC cannot back-up over a network.
What I'm recommending is continuing to back up via Time Machine to your TC (since you already have it), and getting an external HD to use with CCC as additional or "secondary" backups. See #27 in Time Machine - Frequently Asked Questions for details and some recommendations. -
RTC-5161 Error when deploying a MAP
Hello,
I recently upgraded OWB 11.1.0.7 to 11.2.0.3 and within the Design Center, I receive error RTC-5161 when deploying a MAPPING. My process flows and all other objects deploy successfully but the MAPPING pops up the RTC-5161 error
Here is how I went about my upgrade, can anyone tell me if I am missing something?
-Installed OWB 11.2.0.3 on a new server, configured Workspaces, workflow workspace user
-Exported an OWB 11.1.0.7 project MDL and imported into the 11.2.0.3 and the Design Center automatically UPGRADED my project.
-Registered all locations
-Revalidated all locations within the ROPOSITORY BROWSER(the statuses were previously showing UNKNOWN, now they are all valid)
I need help PLEASE, if anyone could point me to something I am overlooking....
AGAIN, ONLY the MAPPING will not deploy, but the Process Flows generates and deploys with no issues.
I tried running the DEPLOYMENT of the Project from the command line(OMBPLUS), here is the error generated:
Processing module LOCATIONS ...
Deploying module name: FFL_DL_BMFENT_FFM_BMFENT
module name is FFL_DL_BMFENT_FFM_BMFENT
Deploying module name: DBL_EFDS_DL_BMFENT_DBM_TGT_EFD
module name is DBL_EFDS_DL_BMFENT_DBM_TGT_EFD
Deploying ... CONNECTOR : DBL_EFDS_DL_BMFENT_DBM_TGT_EFD/CONN_FFL_DL_BMFENT_FFM_BMFENT
Error deploy drop action plan for DBL_EFDS_DL_BMFENT_DBM_TGT_EFD/CONN_FFL_DL_BMFENT_FFM_BMFENT, err msg= "OMB05602: An error occurred during deployment: DeploymentContextImpl.generate WBGeneratedObject[] is null or length 0 for CONN_FFL_DL_BMFENT_FFM_BMFENT"
Error deploy LOCATIONS : CONNECTORFixing this actually entailed going through the repository browser and checking the first optional feature during the configuration of the workspaces etc
thanks for all your help!
Now I have another issue with synchronization:
I noticed that doing an inbound synching of my staging table using replace option and by object name, the preview window that pops up shows my objects to be updated not matching one to one.
Has anyone ran into something like this?
The synchronization preview shows source to target columns NOT MATCHING one to one..... -
Itunes wont open. Ive tried uninstalling, cleaned up my PC and then re installed again but still wont open! There are no error messages. It just wont open! Im very frustrated and anything would help! I have Windows 7 or Vista. Idk which
Hello Dr.Help,
Thank you for providing so much information about the issue you are experiencing with iTunes. It sounds like you have tried reinstalling it, but nothing happens when you launch it. I recommend following the steps in this article to resolve launch issues with iTunes:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport -
After the iOS 7 update my iPhone 5's touch screen is unresponsive some times ,can't even open the lock screen , I had to turn the phone off and turn it on again ,any solutions ?
Hello kumarsenthil210317
Check out the article below to start troubleshooting issues with touchscreen response.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Regards,
-Norm G. -
Logic 9 crashed and won't open again
Hello everyone,
I have the latest Logic Pro 9 and I'm working on a MacBook Pro
2.7 ghz
4 gigs memory.
Started recording a track with midi and audio tracks,
At one point logic crashed so I reopened it and kept recording.
Everything was fine,then I shut my computer down and opened
It again and it started searching for my battery drums which are all in the correct folder.
After a few battery drum searches it just stays there trying to load ??!
No more dialog messages ?
I have never ever had an issue with either logic or my MacBook Pro.
I try to open up early saves and sometimes it opens but not all the time.
Anyone having the same issue ??
Also since my system crashed I opened a fresh logic and dragged and dropped all the midi and audio files to a brand new project and I'm still having the same issue,it won't fully load up ?
I'm starting to wonder if battery is messing with the computer ?
The only fix I found was to shut down the computer and start it up again and then it loads sometimes ??
Any advice would be helpful,
Thank youIt seems you have a corrupted Project so to rescue most of the data from this corrupted project you can open a new project and then use the Import Data feature of Logic to bring across the tracks from your corrupted project... to this new Project
See this part of the Help Guide for further info...
http://help.apple.com/logicpro/mac/9.1.6/en/logicpro/usermanual/index.html#chapt er=7%26section=6%26tasks=true
If you need more help after reading the Guide, let us know...
Maybe you are looking for
-
How to delete multiple copies of photo in events folders
Is their a quicker way to delete multiple copies of the same photos without having to go to the photo and hit the delete key.
-
How can I get a PC connect to my home Airport Extreme network ?
HELP! I'm trying to get a new PC (that we know has a working wireless card-it works fine at Best Buy) to connect to my home Airport Express network? It's an older Apple Airport, but I have multiple Mac's of various ages, an iPad, 2 iPhone 4S & an iP
-
I am running PageMaker 6.5 on a Windows 7 OS. I can print to all my printers except one. It is a Platesetter or sometimes called an imageseter. When I send a file to it, it gives me the message "No Process On The Other End Of The Pipe". I have inst
-
Af:table how to conditionally disable a column based on another column
Hi, I have an update able af:table of Employees record. I'm trying to disable(make read only) the "Salary" column if the manager_id is '146' on loading of the table Can this be done? Edited by: srihari manian on Aug 5, 2009 1:37 AM
-
Prepared Statement nested calls (Oracle)
I have a prepared statement like select type , id from ms_page_position where page_id = (select id from ms_url where url = ?) and column_id = (select id from ms_column where name = ?) and preview = ? order by position asc. If i place in pstmt.setStri