RTC-5230 - Location DEV_LOC has not been registered by the current user

All,
We have recently migrated our dev environment to new hardware and I need to change the OWB Location details to reflect this - I am now attempting to unregister the locations in the Control Center but am getting the following error:
RTC-5230: Location DEV_LOC has not been registered by the current user
Is there a view I can use to find out which user registered the Location?

Look at this thread (steps for unregsitering location)
Re: Unable to connect control center and start runtime service
Regards,
Oleg
PS. Before using unregister_location.sql script unregister this location in Warehouse Builder Browser (Locations Report section).
This prevent from displaying error "Location ... is registered in this repository" during execution this script

Similar Messages

Microsoft Word Has Not Been Installed for the Current User

Hi, everybody
I'm just starting our attempt to put together ZfD app packages for MS Office 2007. I've tried 2 different route with poor results for each. I'm looking for guidance and suggestions and, hey really, the simple final solution. :)
Objectives: Each app package will install locally one of the Office apps (e.g., Word) if it is not installed and then launch it, otherwise it will launch it. It gets installed locally to the C: drive using all the MS default choices, but runs from the desktop ZEN/NAL shortcut. All desktops are XP, not Vista or W7.
Routes tried and failed...
1) Simple app, uses distribution and run scripts to figure out if already installed, then installs using network shared drive and config.xml file for just the one app. The result ought to work -- no particular error in the package, those are fixed -- but what happens is something different each time with the MS setup.exe, and it never does complete without its own error (various and different each time). So, this appears to be completely unreliable because launching MS's setup.exe from a simple app is unpredictable and incomplete.
2) Snapshot of a successful setup.exe and config.xml install. This ALMOST works... well it does in fact work but the snapshotted app gives an error once it finishes launching -- "Microsoft Word Has Not Been Installed for the Current User" -- and exits. From the research I've done on this message, the MS program sees the "wrong" Windows profile on the destination environment, compared to that in the snapshot, and figures it's now been installed from a bootleg copy of Office 2007.
At this stage all I can think of is expletives. We've paid for everything, I've followed all the usual and customary steps, played by the rules, been polite (and also used the necessary computer swear words), and now I just want to insult everyone in Microsoft's marketing department for ruining everyone's life yet again. Can't we just do this, is it too much to ask!?!
Please help me. What is really going to work for distributing and maintaining Office 2007 apps using our ZfD environment? ALL USEFUL SUGGESTIONS WELCOME. Thank you. Bless you.
-Kent S.
Be strong as a ship and wise as a whale

These questions are really best in the Microsoft Office Forums.
These are MS Office Questions not ZEN Questions.
Novell did not design Microsoft's Office Install.
I have nothing against snapshots, but it does not work great with the Office
installs, which you yourself know since you are posting here with problems
based on that.
And your other method you are trying with the break out is not working well.
We also know that from experience.
We can tell you that the way most people install it and the way most people
succeed doing it, is by doing it the way recommended and designed by
Microsoft.
ZEN does that just fine.
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
"KentFSmith" <[email protected]> wrote in message
news:[email protected]...
>
> Thank you, Grimlock (-Grimlock?-)
>
> Through a google search I encountered a very close suggestion, and the
> poster said they couldn't remember the name of a MS utility but that
> there was one that would break out the individual MSIs from the Office
> 2007 setup.exe bundle. The dependent app appears to be a simple and
> possibly elegant solution, but without a good way to break out the MSIs
> I don't see how to do anything other than with a config.xml ('Config.xml
> file in the 2007 Office system'
> (http://technet.microsoft.com/en-us/l.../cc179195.aspx)).
>
> Do you know of that utility and where I can find it?
>
> There is a lot of history here now of just doing the individual
> applications. Everyone gets Word and Excel, but much fewer get
> PowerPoint and Access. All other reasons aside, a compelling one is the
> reduced number of help calls to the Help Desk here. Occasionally we
> also just run the whole Office install for someone who needs some of the
> odd utilities, but that is easily cost-justifiable for us to break them
> out as exceptions. Otherwise, we focus 90% of our support on just Word
> and Excel and it pays off nicely.
>
> If we switch to putting full Office 2007 on all PCs then there may be a
> better approach that include other tools than ZfD, such as the fact that
> we replace 1/3 of all PCs in the organization each year (so that no
> hardware is more than 3 years "behind"). We could put 1/3 of all Office
> 2007 installs into the new PC image. But we still need to support all
> the use of the apps after the install, so ZfD MUST work well, it simply
> MUST work well or we're screwed, to use the vernacular. Also, just
> switching from what we've been doing for years -- single app orientation
> -- means introducing new-ish issues that have to discover and explain to
> our comrades, and to adjust our orientation with unknown future costs.
>
> But that may end up being the simplest adequate solution. And that's
> what I want.
>
> -K
>
> grimlock;1883526 Wrote:
>> Craig Wilson wrote:
>> > You should really focus on #1.
>> > Snapshot is not the way to go.
>> >
>> > Details about what is Not working or what random behavior may help
>> folks.
>> > Ask in the MS forums may help too. dont' mention zenworks.
>> > Just say you are installing as Administrator from a share and getting
>> these
>> > errors.
>> >
>> > While not 100% accurate, it should be good enough to get some good
>> feedback.
>> >
>>
>> Nor is installing 1 app at a time. Install the whole suite, have an
>> icon for each app that runs the exe for that app with a dependency on
>> the another app that points to the installer msi.
>>
>> If any user runs any app, it will run if the executable is there
>> (meaning it's been installed). If the executable is not there then it
>> calls the dependent application (the installer app) and installs it,
>> and
>> then runs it.
>
>
> --
> KentFSmith
> ------------------------------------------------------------------------
> KentFSmith's Profile: http://forums.novell.com/member.php?userid=2927
> View this thread: http://forums.novell.com/showthread.php?t=391573
>
>

Variant "_$$audit-event-count" has not been declared in the current scope.

I migrated my bpel process manager from Version 2.1.2 [oc4j linux] to 10.1.2.0.0 [using jboss as application server].
The orabpel schema for 10.1.2.0.0 seems to be a bit different.
I installed the new schema and then dumped all the data from my previous schema. I also successfully deployed the 2.1.2 processes onto 10.1.2 version.
I can initiate a new instance of the process, however , the previously completed instances or not completed instances fail with the following error,
16:28:06,061 INFO [STDOUT] <2006-01-31 16:28:06,061> <ERROR> <default.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "instance manager": Variant not found.
The variant "_$$audit-event-count" has not been declared in the current scope. All variants must be declared in the scope before being accessed.
Any advice is greatly appreciated. Thanks.

JScript is JavaScript.
Ah, now there's part of the confusion :)
If you're asking about a Windows Script Host (WSH) script, you don't have to declare stdin because it's part of the host.
Ok... So if I understand you correctly, I'm actually programming in J(ava)Script on windows for WSH. Simply trying to call ReadLine fails as well, as it is not defined according to the compiler.
Be specific: What are you trying to do? Tell what you want to do, not
how you think it needs to be done.
which brings me to my current issue: attempting to ReadLine() (in order to get the program to pause for a moment, from
this example)
I know I put up a pretty big wall of text back there, sorry about that.
EDIT: Well, I think I've learned
about J*script. It sounds like JScript and Javascript are more just versions of ECMAScript.

Regarding iMessage, when i want to send text to a person in my contacts app, i've been getting a message saying the number has not been registered with iMessage. How can one fix this problem?

Regarding iMessage, when i want to send text to a person in my contacts app, i've been getting a message saying the number has not been registered with iMessage. How can one fix this problem? It works on the iPhone.

It takes two to tango, maybe it's your recipient that has weak Internet/Cellular connections.

I have a Windows copy of Photoshop Elements 11, but the serial number has been lost. I didn't buy the product and I am unable to find the box. As far as I know, it's never been used so has not been registered. Does anyone know how the serial number can be

I have a Windows copy of Photoshop Elements 11, but the serial number has been lost. I didn't buy the product and I am unable to find the box. As far as I know, it's never been used so has not been registered. Does anyone know how the serial number can be recovered under these circumstances?

If you never bought the product then you cannot get the serial number.

ISE 1.2 Guest Portal - This device has not been registered.

I have setup and SSID on my WLC. I got the redirecting to my ISE guestportal working.
However when I sign in I get a Device regitration Page
"This device has not been registered"
Unable to obtain the user information needed for network access.
The device ID is grayed out and blank.
Any assistance in this matter would be greatly appreciated

Thanks Johnston,
P.S for those who needs the path ISE 1.2 Administration -> Web Portal Management -> Settings -> Multi-Portal Configurations -> DefaultGuestPortal -> Operations.
On another note
When I login - I get my acceptable usage policy.
Accept
Then get a Device registration Portal where I can add the MAC address.
Now I have two quistions.
When I add my test mac address the url redirects to myservername:8443/guestportal/AfterDevReg.action - unable to connect <- that's the one issue.
The other is - Can't I by pass the MAC? ie once the user is signed on to get access.
Curretly I have the following settings enabled.
Enable Mobile Portal
Allow guest users to change password
Guest users should be allowed to do device registration <- if I disable that after signon the page just flash back to the guest portal.

The OLE DB provider "Microsoft.ACE.OLEDB.15.0" has not been registered.

Similar to another post, I was trying to run this query in SQL Server Management Studio 2008 R2 (64 Bit) running on Surface Pro3 Windows 8.1
SELECT * FROM OPENROWSET('Microsoft.ACE.OLEDB.15.0','Excel 15.0;Database=C:\Users\File.xlsx', 'SELECT * FROM [Sheet1$]');
I got this Error:
Msg 7403, Level 16, State 1, Line 2
The OLE DB provider "Microsoft.ACE.OLEDB.15.0" has not been registered.
I realised I had 32 bit version of MS office 365 2013 installed, so un installed and re installed 64 bit and I get the same error.
How can I resolve this error or what should I check next? Thank you.

Hi Dixone,
In addtion to Olaf's, the below links can help to shoot the troubles when loading excel using T-SQL.
SQL Server – Import Data from Excel using T-SQL
Questions About Using TSQL to Import Excel Data
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support

Central Web Authentication Fail - This device has not been registered.

Dear All,
I have problem when apply the cwa. i have wlc and ise,
I want all user (all type device) that want access to my network by Wifi, will authenticated by AD.
but user cant connect to network evenly only authenticate.
My ISE Authorization rule:
if
(Wireless_MAB AND AD1:ExternalGroups EQUALS example.com/Users/Domain Users)
Anyone, have experience like this before, please share..
nb : my ise licese is Base Package
Thanks!!

I had follow the configuration guide from here:
http://www.cisco.com/en/US/products/ps11640/products_configuration_example09186a0080bead09.shtml
but, my authentication always fail with redirect to device registration,
when user connect the ssid and input the username and password based on active directory,
then browser will show up like this :
1. Access with Windows :
Device Registration
This device has not been registered.
You need to manually configure your device. Contact your system administrator for assistance.
Your device configuration is not supported by the setup wizard.
Device ID        : my-workstation-mac-address-
Description     :
2. Access with Android
Device Registration
This device has not been registered.
You need to manually configure your device. Contact your system administrator for assistance.
Unsopported operating system type encountered.
Device ID        : my-android-mac-address-
Description     :
Thanks,

ODBC: This Datasource has not been Registered, Please register first!

Hi,
I just installed Oracle BI 10.1.3.4, and am going to demo the new interactive dashboard to my seniors. First I need to have a database to connect to, so I go to the ODBC client to define a data source. Now I'm stuck here: Under File -> Open DataBase and get the following values to fill out:
DSN:
User:
Password:
Database:
I'm trying to connect to an Oracle database, so under DSN I choose 'ODBC data sources', but get this message everytime: ODBC: This Datasource has not been Registered, Please register first!
It doesn't matter whether I fill out the other fields or not. What's the issue?
All help apprecitated.
Thanks!

First and foremost: "BI 10.2.x"? BI EE hasn't reached beyond 10.1.3.4.0 yet.
Secondly: if you want to access an Oracle data source it's easiest to go over a TNSNAMES entry. Just install an Oracle client locally.
Alternatively, if you want to create an ODBC connection...that's got nothing to do with OBI, that's an OS topic. Assuming you're on a Windows box, it's the "odbccp32.cpl" which normally resides in C:\Windows\system32 that you're looking for (as you say you can't find it in your start menu).
Easy way: windows key + "R" (or Start --> Run...) --> odbccp32.cpl
Hth,
C.

Apple id has not been used with the itunes store-please review your account information

Hello,
Good Day.
I bought apple ipad 2 and need help.
I registered online and after this i am getting the error.
apple id has not been used with the itunes store-please review your account information
Can any one help me in this issue.
Thanks&Regards,
Shankar.M

This is information you you have created an apple id.
To use this apple id for the itunes store, you have to agree to the terms and conditions and enter in the requested information before you can use the store.
When you create an apple id it does not mean you gain access to all apples features, you would need to create a :-
Itunes id
Facetime id
Game centre id
imessage id
icloud id
You can use the same email address as each login. but until you agree to each terms and conditions you wont be able to access the services.
This is usually done the first time you access each service and sign in with your apple id.
As to iTunes you need a little extra as they will request to confirm details as to address, etc, with the payment information they can confirm you are actually in that country you are trying to purchase from.
Once you have added the credit card details, you can go back in a set payment method to none and remove the credit card details once you have activated the itunes on your apple id.
Basically this message you are getting is just ADDING the feature of iTunes store to your apple id, and confirms you have not got a iTunes id yet.

I am getting this error message when I open Safari. How do I make it go away? "Error Safari 6.0 (v8536.25) has not been tested with the plugin SplashId.bundle (null) (v6.0.4(. As a precaution, it has not been loaded. ?

Error
When I launch Safari on my MacBook Pro
Safari 6.0 (v8536.25) has not been tested with the plugin SplashId.bundle (null) (v6.0.4(. As a precaution, it has not been loaded. Please contact the plugin developer for further information.
I am getting this message when I open Safari. How do I make it go away?
Thanks, Ed Williams

To Remove plug-in
1.) Open the SplashID desktop app
2.) Navigate from Menu bar "File" -> "Plugin for Safari" -> "Uninstall".
I could not find it in either Library/Internet Plug-ins nor ~/Library/Internet Plug-ins as others have suggested.
Cheers!

"This message has not been downloaded from the server" - Multiple devices all using Exchange Active Sync

We are having this issue across multiple IOS devices ranging from IOS version 5.x up to the latest 6.1.2. Many (not all) emails sent to the devices are unreadable and simply state: "This message has not been downloaded from the server". Microsoft believes this to be some sort of bug with the IOS devices in the way they are handling the SSL encryption.
Facts:
- Devices are connected to an Exchange 2010 SP1 Rollup 6 via Active Sync (No POP3, IMAP or SMTP)
- issue occurs on multiple IOS devices within the organization ranging from IOS 5.x up to the latest 6.1.2
- Issue occurs on both external cellular data and internal wireless networks
- Not all emails sent to the devices result in the error, but issue does tend to occur more frequently from certain senders/domains
- Using the same user account on an android phone does not result in an issue (even when receiving the exactly same email that has been sent to the IOS devices)
- Closing mail app / rebooting device does not resolve the issue
- Doesn't appear to matter what the mesage format is (can be html, plaintext, etc)
- Spent nearly 7 hours with Microsoft going through the Exchange server configuration and looking for possible causes. None have been found and all testing indicates things are setup correctly.
- This is not a case of Issue 2.3 listed here: http://support.microsoft.com/kb/2563324 (verified by Microsoft Support)
- If we disable SSL on the IOS device and connect via plain HTTP the messages are displayed correctly!
- If we use a different SSL certificate, the issue still occurs - so not a problem with the original cert.
Does anyone have any suggestions on what would cause this? Does the ISO devices have any sort of log that would indicate why it's reporting this error? The current error is pretty unhelpful.

GFI Have a solution for this problem. It is to do with iOS implementation of reading the message headers when SPF compliance modifications are made by GFI.
http://kb.gfi.com/articles/SkyNet_Article/Error-This-message-has-not-been-downlo aded-from-the-server-when-downloading-messages-to-an-iOS-device?retURL=%2Fapex%2 FSupportHome&popup=true

I have an Apple ID and trying to sign in for the 1st time on iTunes. When I do, I get the message: "This Apple ID has not been used with the iTunes Store. Please review your account information." When I do, I get stuck in the same loop and can't sign in!

I have an Apple ID and trying to sign in for the 1st time on iTunes. When I do, I get the message: "This Apple ID has not been used with the iTunes Store. Please review your account information." When I do, it brings me to the same AppleID login window, and I get stuck in the same loop. I never get to the following screen to enter my account info. What's going on?? This is MADDENING!

If you want to use it, click Review and check your account information. Or you could contact the store support staff if you are concerned at http://www.apple.com/emea/support/itunes/contact.html for further help.

U2018Ea unit of measure has not been created in the language ES u2018in srm

Dear Friends,
I have checked in ECC & SRM in table T006A (UOM languages). UOM "EA" is defined in ES (Spanish).
Also in comm_hierarchy also i chked for product category language maintenance and found maintained in EN,ES languages.
u2018Ea unit of measure has not been created in the language ES u2018
I have tried with sapanish (international sort,dominic,traditional sort)& rest of spanish spoken country languages but i am getting the same error.( IE- tools-general-languages & refreshed the page). u2018Ea unit of measure has not been created in the language ES u2018
Regards,
William

Hi Willam,
When are you getting this error ? i.e. while creation of shopping cart or process purchase order..
I believe this issue is due to creation of UOM..which means EA UOM should be created with EA language.
For further details please have a look on
http://wiki.sdn.sap.com/wiki/display/SI/UnitofMeasurerelatedsettingsinSAP
where they have specified that "Maintain UOM in different languages by logging to the system with different logon language"
Kindly confirm.
Thanks
Rajesh K

I updated my iphone 4S with iOS 6.1.3 and now my e-mails say, "This message has not been downloaded from the server". We have an Exchange server at work. ??

I updated my iphone 4S with iOS 6.1.3 and now I cannot retreive or send my e-mails. We have an Exchange server at work. I still receive the e-mails on all my devices just fine and I can see the subject headings & a small portion of the body of the e-mail, but when I open the e-mails there is no body and it reads, "This message has not been downloaded from the server". Very aggrevating and is not helping my business at ALL!! Same has happened with both iPads we own now.

Delete then add back the exchange acct on each device.

RTC-5230 - Location DEV_LOC has not been registered by the current user

Similar Messages

Maybe you are looking for