Rtcsqssummary table only showing last 25 created CSQ entries

We have a wallboard that is pulling CSQ stats from the rtcsqssummary table.
Its currently only showing the last 25 created CSQs on the wallboard. We have approximately 101 configured. Is there a limit to this table or is it configurable? We are running CCX version 9.0.2.10000-71.
Running this command and only 25 entries appear.
admin:run uccx sql db_cra select count (*) from rtcsqssummary
(COUNT(*))
25
However its showing 101 configured and active.
admin:run uccx sql db_cra select distinct count(*) from contactservicequeue where active='t'
(COUNT(*))
101
Thanks in advance.

Hi
That table only updates on the current 'active' node. If you have HA, maybe check the table on the other node, you may be looking at stale data on the secondary from last time it was active.
Otherwise... something odd is going on. There's no max, and no config, it may be reboot time ;-)
Aaron

Similar Messages

  • TS3899 My email only shows last weeks worth of mail! I want it to show all of my mail previous

    My email only shows last weeks worth of mail! I want it to show all of my mail previous

    There are a couple of things that could be deleting mail messages.
    In Mac's Mail app click on the Mail > Preferences menu item. Now select your offending mail account from the Accounts list.  Now click on Advanced.  There is a setting to "remove copy from server after retrieving message."  The Mail app will delete messages from your email service based on this setting.  This will not delete messages from your computer.
    If you are losing messages from your computer then click on  Rules in Mail's Preferences, then check each "rule" to see if there is one that could be deleting messages. Click on the rule and then  on Edit to see the rules criteria
    Example of a rule that would delete messages:
    If neither of these is your problem I suggest you check with Yahoo to see if there is a setting  on their service that could be deleting messages.
    Dan

  • Table only showing some borders

    HI, I'm new to dreamweaver although have mucked around a bit
    with MX. I now have CS3 and I'm going crazy over this one problem.
    ( at the moment anyway)
    I have a table with 3 rows and 3 columns. A lovely double
    border shows around each cell in design view but when I display it
    in Internet Explorer or upload it live it only shows 3 or the 9
    cells with internal borders. (sorry very little html knowledge)
    Help for a novice please I'm running out of time to get this
    done and have already rewritten it 3 times.
    Thanks

    On Fri, 22 Aug 2008 11:07:46 +0000 (UTC), "kjac137"
    <[email protected]> wrote:
    >Its an existing website that I'm trying to alter, the way
    it is set up does not
    >show a URL but here is the directions to the problem page
    > www.rdl.co.nz
    > select 'pin & wooden toys" (4 button from bottom)
    > select' PinToys"
    > select "games" in the middle of page.
    > Its the games page that I have recreated in tables as in
    previous program it
    >was created in layers and the minute you tried to add
    anything it totally fell
    >apart.
    >
    > Thanks for any help available.
    >
    >
    It uses frames - that's why it difficult to give a link -
    just one
    reason why its so often strongly advised not to use them
    But the page is her:
    http://www.rdl.co.nz/games.html
    - controlling tables is so so much easier with css in an
    EXTERNAL
    style sheet.
    you the inline css that uses huge amounts of Absolute
    positioning.
    It's going to take a lot of digging to find this one perhaps
    ~Malcolm~*...
    ~*

  • ITunes only showing last 12 podcasts made

    I use blip.tv to make my podcasts, and for some reason itunes will only show my last 12 episodes. I have looked through their settings but cannot find anything to change, and blip say that they do not limit posts.
    my RSS is http://childrensministry.blip.tv/rss/itunes

    Anthony,
    You are not alone! Although my RSS seems correct iTunes Store does not seem to be displaying my uptodate feed.
    feed://feeds.feedburner.com/TheHistoryNetwork
    iTunes listing
    http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?i=22944563&id=1868 84743
    Interesting we both use Feedburner, I had a similar issue twelve months ago and after going round and round trying to find where the fault was it turned out to be feedburner! I've posted a question on the forum so we'll see if it is them.
    Gus

  • [SOLVED] Htop only shows last 2 system load values

    I have the latest htop (1.0.3) installed on my desktop. The system load meter only shows the last 2 (5 and 15 minute) load averages. Top and uptime display all three values.
    How can I get htop to display all three load averages?
    Last edited by subraizada3 (2014-06-06 20:45:37)

    I had searched my filesystem for a htoprc before, I'm not sure why I couldn't find it at that time.
    I can't find any fields that seem to be related to this in the htoprc.
    ~/.config/htop/htoprc:
    fields=0 2 48 18 39 47 46 49 1
    sort_key=46
    sort_direction=1
    hide_threads=0
    hide_kernel_threads=1
    hide_userland_threads=0
    shadow_other_users=0
    show_thread_names=0
    highlight_base_name=1
    highlight_megabytes=1
    highlight_threads=0
    tree_view=1
    header_margin=0
    detailed_cpu_time=0
    cpu_count_from_zero=1
    update_process_names=0
    account_guest_in_cpu_meter=0
    color_scheme=0
    delay=15
    left_meters=CPU Memory
    left_meter_modes=1 1
    right_meters=Tasks LoadAverage
    right_meter_modes=2 2

  • Bridge email only showing last 20 messages -ideas?

    just started yesterday but when the Playbook bridges to my BB and the view is All Messages it only loads the last 20 messages to see. I have 3 personal email boxes and 1 work email set up. all functions on BB with respect to email work fine. when you open email you can edit and reply fine. i individually selected each email box and it is one that seems to have problems and wont load. any ideas? happen to others? solution?

    me to.
    we have one playbook bridged with a tourch, 1 BES account 1 pop account. Tourch firmware is up2date, playbook firmware up2date, bridge version is last available.
    Suddenly i am also able to see only the last 20 entries of the BES account
    Did someone have any ideas?
    tried: unpaired, deleted bluetooth entries, new pairing, hard reset of playbook and tourch
    When i pair the playbook with another tourch everything works fine. Could it be the numer of emails in the BES account (885 emails)?
    Any HELP welcome!!!!

  • Mailbox auditing log search only shows last 7 days

    I have mailbox auditing turned on for a mailbox, and the audit log age limit is set to 90 days.  When I run the non admin user access report however it only shows me auditing items for the past 7 days.  If i go to powershell, and run search-mailboxauditlog
    it shows the same 7 days. Any suggestions?

    http://technet.microsoft.com/en-us/library/ff459237(v=exchg.150).aspx
    Mailbox audit logs are generated for each mailbox that has mailbox audit logging enabled. Log entries are stored in the Audits subfolder of the audited mailbox Recoverable Items folder. This ensures that all audit logs are available from a single location,
    regardless of which client access method was used to access the mailbox or which server or workstation an administrator used to access the mailbox audit log. If you move a mailbox to another Mailbox server, the mailbox audit logs for that mailbox are also
    moved because they're located in the mailbox.
    By default, mailbox audit log entries are retained in the mailbox for 90 days and then deleted. You can modify this retention period by using the
    AuditLogAgeLimit parameter with the
    Set-Mailbox cmdlet. If a mailbox is on In-Place Hold or litigation hold, audit log entries are only retained until the audit log retention period for the mailbox is reached. To retain audit log entries longer, you have to increase the retention period by
    changing the value for the AuditLogAgeLimit parameter, or export audit log entries before the retention period is reached.
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • When I open TB, under "Accounts", it only shows the option "Create a new account". Option: "View settings for this account" is NOT shown.

    When I open TB, I no longer see any information about the TB account I've used for years. Instead, the main menu shows only "Accounts" -- "Create a new account - Email, Chat, Newsgroups, Feeds". Option: "View settings for this account" is NOT shown.
    Also the main menu does NOT show "Email - Read messages, Write a New Message" or "Advanced features", etc..
    The actual emails pertaining to the TB account I've used for years are still present under the "Users --> xxxxyyyy --> AppData --> Roaming --> Thunderbird' folder.

    http://kb.mozillazine.org/Recovering_a_profile_that_suddenly_disappeared

  • Table problem: show last x rows ?!?

    Hi,
    after initializing a view containing a  table i want to show the last row at the bottom:
    // in wdDoModifyView:
    IWDTable theTable =  (IWDTable)view.getElement(
          "oliTable");
    theTable.setVisibleRowCount(10);
    //changing to 10 rows works!
    theTable.setFirstVisibleRow(19);
    // Doesn't work. First row is shown on top
    The table has 31 rows.
    All hints welcome
    Bernhard

    Hi
      Well you can do a moveLast(). That should move the lead selection to the last row if that is what you want.
    Say you have bound a value node called "TableNode" to the table UI  Element. Then what you can do is
    After the table is filled with data you can then just do
      wdContext.nodeTableNode().moveLast();
    Hope that helps you.
    regards
    ravi

  • Table: Only show XML with a certain value?

    I am building a table from an xml file and it is working great if I ask it to show every node.
    But I only want the row to be added if it matches a particular value in the xml.
    For example my xml has values for name, rating and enrollment.
    So something like...
    if ({@rating}=="acceptable"){
                   <tr spry:repeat="ds1" >
                           <td width="300">{@name}</td>
                           <td width="150">{@rating}</td>
                           <td width="150">{@enrollment}</td>
                   </tr>
    Any suggestions would be appreciated.
    Thanks.

    Set setXPath is probably the best way to go. See here http://labs.adobe.com/technologies/spry/samples/data_region/SetURL.html#

  • Wiki Server: Subscribe in iTunes option - only showing last 20 episodes

    I have enabled Podcasting on a particular blog. We are using SL Server 10.6.8.
    The blog has 36 posts with attached media. However, when I click on the "Subscribe in iTunes" button and click on GET ALL episodes, it only picks up the last 20 episodes. I assume it is because, on the blog itself, it is just showing the latest 20 posts and you have to click on the next page to see the rest.
    The Podcast url link goes like:
    itpc://ourdomain.edu/users/username/blog/index.its
    What happened to the rest? Or how will I configure subscribe in iTunes button so that it'll pick up the entire collection.
    thanks in advance.
    Marlon

    I don't have a solution, just piling on to the complaint.
    I subscribe to several weekly shows. They work fine for a few weeks then (POOF) the automatic download stops. I go back to the sites they originate from, the content is there. There aren't any message boards or blogs so I can't tell if this is just me or rampant. But this has happened to so many different podcast subscriptions . . . actually I can't think of one podcast subscription I have that has sustained continuously. They all have done it.
    Apple: Whats up?

  • Calendar Search only showing last year's entries

    Hello,
    If I do a search in the calendar, the results are only shown for the past 12 months or so. How can I get the Iphone (3GS) to show all results? I read about an option in the iPhone settings (calendar) but it's not there.
    Any suggestion?
    Thanks in advance!!

    That may be its limitation, as spotlight searches calendar events in a two-year window. It will reveal results from one year in the past and one year in the future. If an event has recurrences that fall in this range, it will find the event that is closest to the current date.

  • "Buffer table not upto date" while creating Service entry via BAPI

    Hi All,
    I am facing the same issue while creating and accepting a service entry sheet via BAPI_ENTRYSHEET_CREATE in a report . I get a pop up message S001 (Buffer table not upto date) in ML81N. Though, it is not an error message it delays the further processing. I have checked the relevant threads for this message but since there is no SRM involved, I couldn't track the exact solution.
    Regards,
    Garima

    Hi ,
    Please close all the applications and re-check your rquirement.
    Also, check for any information from SM21 logs.
    Some times, it can be due to program /report not correctly maintained.
    Finally, Basis people need to validate & may re-start (cautios of Production system) system.
    Regards
    Nagaraju

  • Unable to create new entry in table that has no primary key

    Hi
       I have a table which is required to have no primary key (except mandt). After i generate table maintanance, when I go to create new entries, the table control to enter the new values does not appear. When I click on edit->new entries, it goes back to the fields tab of the table. Same when i check through SM30.
    If i maintain atleast one primary key, I am able to get the table control in new entries screen. However the requirement permits no primary keys except mandt. How can this be resolved?
    Thanks
    NM

    Hi,
    THE PROBLEM WITH UR TABLE IS
    YOU HAD DECLARED MANDT AS THE PRIMARY KEY AND THERE IS NO OTHER KEY IN UR TABLE
    iT'S NOT ALLOWING YOU TO ADD NEW ENTRIES BECAUSE MANDT IS THE ONLY PRIMARY KEY IN YOUR TABLE AND IT WILL HAVE A DEFAULT VALUE BASED ON THE CLIENT. SO  IT'S NOT SHOWING YOU THE CREATE NEW ENTRIES OPTION.
    SO TRY TO PUT ONE MORE FIELD AS THE PRIMARY KEY SO THAT YOUR PROBLEM WILL SOLVE VERY EASILY  ALSO MAKE SURE THAT TABLE IS ACTIVATED.
    REVERT IF U NEED SOME MORE HELP
    Thanks &Regards.
    Pavan.

  • Master-Detail only shows the first record of the Master's data

    I have an ADF Master Table, Detail table. I use ExcuteWithParams on the Master Table. When executed from a button (Button has partial submit = true for button, Master Table has PartialTrigger on button, and Detail table has PartialTrigger on Master table and button), it works fine. However, I want to pass the parameters in pageFlowScope variables, and have the ExecuteWithParams invoked upon page load. When I try to do this, the Detail table only shows the first record of the Master's data, no mater what row is clicked on the Master table.
    Master table now has no PartialTrigger, and Detail table has PartialTrigger on Master table. In my pageDef, I used an invoke action as follows:
    <invokeAction Binds="ExecuteWithParams" id="invokeExecuteWithParams"
    Refresh="always"/>
    What am I missing? I am using verion 11.1.1.3. Any help would be much appreciated.
    Thanks,
    Jessica

    Yes, it works when I drag the data control as a master detail without filtering any data. I want the user to be able to set search criteria to filter the data in the master table (For example, only pull back data with a transaction date between :startdate and :enddate). I can get it to work if I execute from an executewithparams button on the page, but not if I want to invoke the executewithparams upon page load with the parameter set by pageflowscope variables.
    Thank you for responding.
    Jessica

Maybe you are looking for