RTE LV8.5 and RTE LV2013 with cDAQ can work together?

Hi:
I have a labview exe file in 2 versions. LV8.5 and LV2013
And for this exe files I use cDAQs
Can I install both RTE and cDAQ drivers and both exe files correctlly?
I have cDAQ driver version 14.2.0 for LV2013 and NIDAQ922f0.exe for LV8.5
Do I have to do any special? Any trick? Will they work ?
I need to do this because LV8.5 file is completelly tested and I can trust in this, but new file LV2013 will be in evaluation and in case of problem I can easilly go to safe version.
Please help

Windows does not allow for more than a single hardware driver to be installed. I don't believe there is a version of DAQmx that is compatible with both versions of LabVIEW.

Similar Messages

  • How do I share / unlink  the right and left channel, so I can work with them individually ?

    I use "Adobe Sound Booster CS5"
    I have a stereo soundtrack, which I only want to remove noise in only one channel (right).
    How do I share / unlink the right and left channel, so I can work with them individually ?

    When Soundbooth was first developed, it had a few extra things than what were not available in Audition. However, Audition remained the more high end sound editing tool. Soundbooth was locked to a multiple channel editing approach. In Audition, single editing is easy - you simply click the L or R at the right end of the sound channel to lock it and then you can edit the other channel only.
    Soundbooth has been discontinued and Audition now has taken its place from CS6 to the Creative Cloud.
    The above is some background info. To your current situation, you can use a workaround like:
    * Export your audio file to separate channels by File > Export > Channels to mono files.
    You will get 2 files with _L and _R suffix.
    You can then edit them separately. You can go from Mono to Stereo by the following step.
    Or
    * Choose - Edit > Insert > Channels  into New Multitrack file.
    That will separate the Left and Right Channels and add them to a new multitrack file.
    You can then click the Edit link at the top right of the channel to edit it.
    You can then save that file as a new audio file.
    Dean

  • HT5661 i switched my iPhone for an android and now people with iPhones can't message me! How do i stop iMessage?

    i switched my iPhone for an android and now people with iPhones can't message me! How do i stop iMessage so i can get text from iphone users??

    This link will tell you how to fix....
    http://www.techrepublic.com/article/how-to-keep-receiving-sms-from-iphone-users- after-making-the-switch-to-android/

  • My new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

    my new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273
    Call AppleCare. They will help you.
    Best.

  • Does 2 firewire audio and video interface can work together  on FCP ?

    hello,
    My audio interface is a TC Electronic Konnekt 24D
    my video interface is a Canopus ADVC 110
    my hard drives are plugged in firewire too
    and I use Final Cut Pro 5.0.4
    So, the konnekt is recognized by FCP only when the Canopus is not plugged. And even then, the audio sometimes drop out and sometimes causes the app to crash, so that I have to trash the preferences
    When I plug the Canopus, the Konnekt 24D is recognised by OS X but not FCP
    I want to use the voice over tool with the konnekt 24D, so what should I do ?
    Does 2 firewire audio and video interface can work together ?
    If so, maybe I only have a driver problem from TC Electronic.
    But if not, I have to change this interface. Let me know if only RME, MOTU, Presonus and Edirol work, as it is said on apple's webpage for hardware compatibility
    thanks
    eMac G4 1,25 Ghz Mac OS X (10.3.9)
    eMac G4 1,25 Ghz 1 Go RAM DDR   Mac OS X (10.3.9)  

    The 1082 does show up as a possible input when I open
    the VO tool.
    Ok. So an audio interface can be plugged to FCP without crashing the app. Because of the Konnekt driver problem, I wasn't shure of this.
    I use my Aja box for export & external monitoring.
    All my audio sources run back into the Tascam and I
    use the analog mixer in the 1082 to monitor different
    sources.
    When I view external video, the audio follows it to
    keep sync.
    that's exactly what I want with other I/O interfaces. I'd like to monitor video with the canopus ADVC 110, and monitor audio with the Konnekt 24D (or another interface if this one is not compatible)
    I also imput dailies with a deck or a camera (DV or HDV) but that's not the point here.
    I want to imput audio with the Konnekt 24D because of its audio quality. Not audio sync to video dailies. But voice over, in sync with FCP video playback (for me, tha ADVC 110)

  • Ipod and external Hard drive don't work together

    I got a dell optiplex gx260 which has 6 2.0 USB ports. My IPod (80GB classinc) library is stored on external HDD. When I connect my HDD to the comp and point iTunes to the HDD library everything is good and I see my songs. As soon as I connect iPod it shows up “unknown device” in a device manager. If I disconnect HDD and connect iPod only windows finds it OK, but as soon as I plug HDD back in iPod disappears. I’ve tried reinstalling sys and inf files, pointing towards updated drivers and all nothing still the same thing, tried every port and every combination on the computer USB ports still the same thing iPod and HDD don’t want to work together. Please advice, thanks.

    I got the same problem here but not just with IPod. When I power up my external disk (with aux power supply) my usb stick (or IPod or printer or scanner or other devices) on other ports get disconnected. All devices did work toghether some months ago.
    I think this is related to a hardware problem. Things began to fail, when I tried to co-supply 5V to a device connected to my usb bus. I possibly toasted some logic on the motherbord.
    Testing your hardware on a second system may help you. Or have a look if a USB stick instead of IPod gets disconnected too. This may prove that its not IPod related.
    Good luck

  • Is it possible to transfer iMOVIE 11 projects between my iMac and iPad2 so that I can work on projects when I'm away from home?

    Is it possible to transfer iMOVIE 11 projects between my iMac and iPad2 so that I can work on projects when I'm away from home?

    ARD is totally unnecessary and inapplicable for your scenario. ARD is a Mac OS X application for managing other Macs and is not useful if you want to connect to a Mac from some other OS. Mac OS X has a VNC client build int, so VNC,  or one of the number of other remote control solutions - LogMeIn, for instance, if they offer a Linux version - is where you want to be looking.
    Regards.

  • Do yosemite and premiere pro 5.5.2 work together without problems?

    do yosemite and premiere pro 5.5.2 work together without problems?

    Hi,
    I don't think we have tested CS5.5 on Yosemite. It might install on it but you should not expect a seamless experience.
    Thanks,
    Rameez

  • Repeated and lost samples with NI-CAN

    I am using LabVIEW 2009 SP1 with NI-CAN 2.7 and a series 2 CAN card on a PXI system running LabVIEW RT.
    I sync'ed my DAQmx AI measurement with a NI-CAN task using the "CAN Sync Start with DAQmx". The Start is now sync'ed.
    As for the samples, I created a test environment: A microcontroller sends a signal via CAN. The signal contains a value that is incremented by 1 with each new CAN message. My PXI measurement programm samples these CAN signal values alongside with DAQmx (5 KHz sample rate, reading 1000 CAN and DAQmx AI values in a while loop). The plot below shows, that sometimes the current value is not sampled, instead the last value is resampled up to 16 times, i. e. the value does stay the same as the last value where it should increment. I made sure, that the source of this effect is not the microcontroller using a third party CAN logging tool.
    The picture below shows the CAN init procedure:
    Does anyone know why I get these repeated CAN signal values?

    I ran a new measurement for approx. 2 minutes and got 2 independent measurement data files:
    the attached VI from above was slightly changed, so that the check loop now saves all received CAN data to a file
    I started Vector CANalyzer on a separate Laptop that is also connected to the CAN wire, but only listening and logging in passive mode (i. e. no ACK is send so that there is no interference with the ongoing communication between PXI and the sending microcontroller)
    I attached both measurement files in CSV format. You will see, that the timestamp dt from CANalyzer does not show any message holes. As for the PXI, I see ~5x repeating values.
    Note: The CANalyzer timestamps are given in 10 us units. The PXI data just contains the incremented signal without timestamps.
    Attachments:
    testcan_measurement_data.zip ‏4167 KB

  • I have an Apple id and an icloud idea, do they work together?

    I just got a new laptop, I downloaded icloud and it told me to make an icloud acount. My apple account is just a user name not an e-mail. icloud wnated me to use an e-mail for the username so now I have two accounts, and apple id and an icloud id. Can these work together? I would like to backup my music and what not to icloud because when I sync my iphone to my new computer it wants to delete all the stuff. Though when I open icloud on my computer I dont see anything about music or apps. I'm just very confused about how all this works. All I want to do is put music on my iphone from my new computer without losing all the stuff I have now. I don't get how icloud works either.

    Did you already activate iCloud on your IOS device using that same apple ID?
    "To create an iCloud account you need an iPhone, iPad or iPod touch with iOS 5, or a Mac with OS X Lion v10.7"

  • Will  FCP 6.0.4, Quicktime 7.5.5 and Mac OS 10.4.11 work together properly

    I have not updated Quicktime on my system for some time now, because I know that FCP & Quicktime work hand in hand. I don't want to cause a problem with any of my FCP editing, by having non-compatible updates trying to work together.
    I bought an I-pod touch and when I connected it to I-tunes,
    I was told that I had to upgrade I-tune to allow it to work properly.
    So I updated my I-tunes Application to ver 9.0.2 on my power PC G5 Mac tower, and now I'm told that in order for the newest version of I-tunes to work that I must update my Quicktime player application to ver 7.5.5.
    Could someone please tell me if updating my Quicktime player may cause a problem with my FCP Application?
    Also... what is the best way to handle updates when they arise?
    I presently have Quicktime Pro ver 7.5 and Final Cut Pro 6.04 on a Power PC G5 Mac tower running Mac OS 10.4.11
    Thanks for the advise,
    Todd

    The current version of Quicktime is 7.6.4, which will be the only one available from Apple Software Update.
    FCP 6.0.6 will work with it and the spec on the QuickTime page says you need at least Mac OS X 10.4.11 to run it. The last few QT updates have all been stable for me.
    So at least in theory, you should be good.
    If you are in the middle of a project, don't upgrade until you finish it. Otherwise, make sure that you have a current backup before you do.

  • Oracle 9i and 9i Developer Suite don't work together

    I've tried to install 9i and 9iDS in different homes. Then, I can work with SQL*Plus (of 9i) but all 9i DS's applications don't work at all. The main problem is that I can not connect to the Database of 9i.
    Is there any body know the solution? Pls help, this is the first time I use developer suite to study Form and Report.

    this tnsping was a great start. it allows the user to find another place to look for errors ora files.
    I was looking in every instance of my TNSnames.ora files. the one in the 9i as well as the 10g were alike and fine. I had to comment out some bad lines from the 10g ora file. the tnsping found the SQLnet.ora file that contained an error. in this case the error was the same line needed to be commented out.
    it is not that I forgot to do so but I didnt know that this line was even in any of the files.
    this tnsping works as a great trouble shooter.
    thanks...

  • Photoshop Elements, Lightroom and Nik Software Lightroom Edition experience working together?

    I have Photoshop Elements 10 and number of plugins, like Topaz Labs ones. I have also just acquired Lightroom. I do want to get CS5 eventually but that is not in the near future.
    I am thinking of getting Nik Software's Complete Collection. It does not support Elements 10, but it does support Lightroom. So solution seems easy, just use it in Lightroom. That solution could also result in $200 saving as edition that includes support for Photoshop and Lightroom is right now $399 while one that supports just Lightroom (and Aperture but that is not of relevance to me as I am a Windows user) is $199.
    However, I do not want to lose benefits of other plugins I have so going with solely Lightroom edition means increased going back and forth between Photoshop and Lightroom.
    So question for those experienced with 3 of these together: Do you foresee issues with getting edition that just supports Lightroom? What things I might feel are missing / might frustrate me with this approach?

      I’ve not used Nik Software but have used Lightroom and PSE together and the two programs integrate well. If Elements was already installed Lightroom should automatically recognize it as your external editor otherwise you need to set up external handling in Lightroom preferences.
    I assume any changes made in Lightroom with a Nik plug in will register as part of the Lightroom Develop settings. Is that how it should work?
    My usual routine is to highlight an image in the Lightroom Library and then
    1) Press Ctrl+E to edit in photoshop - choose PSD with Lightroom settings
    2) Image opens automatically in PSE Editor
    3) Do further editing in PSE and press Ctrl+S to save an overwrite the Lightroom export copy. Click OK
    4) Press Ctrl+W to close the saved PSD file which automatically updates the Lightroom thumbnail.
    It all works quite seamlessly. Use the PSD copy in light room to export a jpeg or any other format of your choosing.
     

  • I will pay for help, Media Encoder and Premiere Pro C4 won't work together

    I know someone has two easy answers...help, help.
    Big Problem one, exporting from Premiere C4, forced into using Media Encoder, which sit there and won't encode from the project/timeline.
    The project is even small, 7 minutes, and I just want to me a AVI file and maybe Flash and Media Player.  Is that too much to ask.
    Then the versioncue.dll, decide to not let me right click in explorer and other links, get a windows error, and again, stuck with nothing.
    Please, I will send someone a gift card if they can help me, really. $25-$50...depending on if you have the solutions.
    [email protected]
    828-778-4854

    Stan, that's correct, however, it's a new computer now.  And yes, I want to
    export to avi from the premiere time line.
    One thing that is weird, I can add to Media Encoder only finished encoded
    files, say to send to a client in a media player
    or flash format, and all works well.  It's only the Premiere C4 project
    export????
    Thanks for any help you may be able to give me.
    Ernie Sigmon

  • Problem with speakers/headset working together

    I'm trying to set it up so all my sound comes through the speakers except for Ventrilo, which would come through the headset. The mic on the headset is working fine, and there are no problems with the speakers at all. The only problem is getting only Ventrilo to come through on the headset.

    Hi,
    Try the following.
    Download the Conexant HD Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45166.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the Conexant device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the Conexant installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for