RTF template design issue for header and body section

Hi All,
I have a RTF template having header and body sections.
in header section i have order number, customer number etc.
in body part i am displaying details for the respective order.
But the problem is in header part my query is returning multiple row , so my requirement is for each row i.e order, i need to display the details accordingly.
Ex: Header query returns order number : 1,2,3
in my page i need below way:
Order number :1
a,b,c
order number :2
c,d,e
order number :3
g,h,g
I tried to use loop in header section , but it is repeating only for header part not body part please help me on this.
Thanks
Deb

Avinash thanks for your help,
Actually in my requirement the header level and line level invoice numbers are different, in header level i have different invoices and for each invoice i need to display some other invoices along with some data.
I have sent you the respective RTF file and Sample XML file to your mail, could you please help me on this, i am struggling whole day on this.
the link between the header and line section is header_id.
Thanks in advance
Deb

Similar Messages

  • Space between header and body section

    Hi All,
    I have a RTF template in that i am displaying the header and body section , i have more than one pages in my report so in the first page the gap between header section and the contains start after that is fine, but for the rest of the pages the gap between header and contaisn is more , can you please guide me how to decrease the space.
    Ex:
    Page 1: Header section
    ABC CORPORATION
    JJJJJJJJJJJJJJJJJJJJJJJ
    -----------------PAGE ENDS---------------------------
    Page2:
    Page 1: Header section
    ABC CORPORATION
    JJJJJJJJJJJJJJJJJJJJJJJ ------------------This space is more i need to decrease
    -----------------PAGE ENDS---------------------------
    Thanks
    Deb

    check if u have any spaces after the for each or any logic u used before data table which have spaces in between.
    send me your sample xml and template i can try at my side.
    email : [email protected]

  • Can i get a new serial number for Adobe CS6 Design Standard for Students and Teachers?

    I have had to re-install my Adobe CS6 Design Standard for students and teachers after having problems with my computer (MacBook Pro)
    I am wondering if there is a way to access my old serial number from when I originally installed CS6, or do I have to start over again and get a new serial number?
    Help is greatly appreciated!!

    You normally use the same serial number that you are first issued.  If you registered your product when you first installed it then you should be able to find your setial number available thru your Adobe account online.

  • How to create schema for Header and Footer with pipe delimiter file BPEL11g

    Hi all,
    I have issule creating Schema for Header and Footer with body file .The file format is Pipe delimiter.The following format below like is...
    Softeware Components:File Adapter(Read) 11g,
    1|1211|000|577|5444
    1|0000|57|6988|4554|sfdgh|5448|3333|ituu|44445|55546|544|788|7788
    1|0000|57|6988|4554|sfdgh|5448|3333|ituu|44445|55546|544|788|7788
    1|0000|57|6988|4554|sfdgh|5448|3333|ituu|44445|55546|544|788|7788
    1|0000|57|6988|4554|sfdgh|5448|3333|ituu|44445|55546|544|788|7788
    1|0000|57|6988|4554|sfdgh|5448|3333|ituu|44445|55546|544|788|7788
    1|0000|57|6988|4554|sfdgh|5448|3333|ituu|44445|55546|544|788|7788
    1|4544|000|yted
    I hope get the sollution for this from this Forum..Please help me out..Thankyou.

    You mean how many rows or columns..?
    If coloumns means 5 and rows only one(1).

  • Receiver FCC Structure For Header and Trailer

    Hi Guys ,
    I need to go for receiver FCC for header and trailer  in PI .How the FCC in communication channel needs to be configured if I am taking a separate node for header and trailer in mapping .Output of the file should be as the file attached.
    Thanks.
    Regards.

    Hi,
    If you are using File communication channel as a reciver you can go with FCC.
    Use record set structure as : Header,detail,trailer.
    https://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
    Otherwise if you are going for SFTP to create the file ... follow the Indrajit suggestion..
    Still facing any issue.. Please let us know..
    Thanks,
    Sreenivas...

  • Can you create a template that has a header and footer to forms?

    Can you create a template that has a header and footer to forms?

    Yes but how are they going to create the Landscape versions?
    The problem with doing it in Pages '09 as rotated content is that the Headers and Footers are not rotated and there is inherent clumsiness in the rotated content usually being too large for the page when viewed at 90°.
    Best to make it in two or more separate documents.
    Peter

  • Error when Compiling package header and body - how change pkb file associat

    Hi everyone,
    it has already been noticed elsewhere (in the thread "Compiling package header and body" of Jan 12, 2010) that the compilation of package scripts sometimes fails (apparently because of a sqldeveloper bug) when the script contains the terminating slash /.
    Is this bug still open?
    Next question: In the above mentioned thread it is recommended as workaround to change the corresponding file type association from pl/sql to sql. I would like to do that; I know the place in the preferences dialog, but most of the associations there seem to be hard coded and cannot be changed.
    I would appreciate any ideas!
    Thanks in advance,
    user8632123.

    For the workaround: you'd have to change the file's extension, not the association (to e.g. .sql).
    Have fun,
    K.

  • Editing HTTP header and body request and sending it...

    Hi there!
    I need to create a new Packet and send it to a server, its a HTTP protocol packet and all i need to do is insert the Header and Body information after sending it to the server..
    does anyone know an example, link, book or anything about how to do it in j2se?
    Thanks very much for any help, and sorry about my english

    Anyway filter's method doFilter() takes a
    ServletRequest as a parameter, not
    HttpServletRequest, therefore I can't use
    HttpServletRequestWrapper and its method
    getHeaders().However you are actually getting an HttpServletRequest object as your actual parameter, so just cast it to HttpServletRequest and do what you need to do.

  • Mdworker[600]: No separator between the header and body in message _CMFMemoryMessage: 0x7f8665118800

    Any Suggest about this issue on console:
    mdworker[600]: No separator between the header and body in message <_CMFMemoryMessage: 0x7f8665118800>
    Best Regards

    Thanks very much. It's turned out to be a font problem. About 30 of the fonts in my account directory /users/me/library/fonts folder were corrupted. They were somehow being viewed as unix executable files instead of font suitcases. !??! No idea what happened there.
    I used Pacifist to reload fonts from my OSX installation disc, but this didn't seem to help. Instead, I found other copies of most of the corrupted fonts in the microsoft office/office/fonts folder, and replaced the corrupted fonts in my home library w/ those.
    I was alerted to the fact the the problem was fonts when I tried to open an Excel file; it came back with messages that these various fonts were corrupted and needed to be removed. Strangely, though the corrupted fonts were in my home directory font folder and not the MS Office font folder, Excel was tripping up - i.e., it wasn't using the fonts from the Office folder. Hmm.
    Finally, there are still a few fonts that are corrupted, and whose source is a mystery to me. They didn't come from the OS installation disc and they don't come from Office; consequently, I can't fix them. They are: Geneva CE, Geneva CY, GrCourier and N Helvitica Narrow.
    Does anyone know where these fonts come from?

  • Every inlineframe generates HTML, head and body tag - how to remove it

    Hi,
    I am using inlineframe for adding HTML content. For every inlineframe, HTML, head and body tag is generated.
    How to get rid out of those HTML, head and body tags?
    please suggest
    Edited by: user10302920 on Feb 2, 2011 3:59 AM

    Hi,
    not sure the component is generating this. Must come from the HTML source you reference. If however it is the inline frame then this is not configurable
    Frank

  • Design Time for Processes and Forms

    Hi experts,
    When trying to open  "Design Time for Processes and Forms" in order to create a process, I get a dump.
    Could you let me know what could be wrong ? config? etc..
    Hereunder is a sample of what I found in T.code ST22
    The following checkpoint group was used: "No checkpoint group specified"
    If in the ASSERT statement the addition FIELDS was used, you can find
    the content of the first 8 specified fields in the following overview:
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
        referenced node must exist
          READ TABLE object_hierarchy_nodes TRANSPORTING NO FIELDS
                     WITH KEY node_id = object_hierarchy_node_wa-ref_node_id
    >>>      ASSERT sy-subrc = 0.
        ENDIF.
      provider has to be specified (except in case of recursion)
        IF object_hierarchy_node_wa-ref_node_id IS INITIAL.
          ASSERT object_hierarchy_node_wa-provider_id IS NOT INITIAL.
        ENDIF.
    Thanks in advance,
    Louis

    note: Note 1075650
    Re: Assertion_Failed dump when accessing Design Time for Processes & Forms EP3
    regards,
    Prakesh.

  • Create Adobe Form using Design Time for Processes and Forms

    Hi all,
    I am trying to create a form that have 3 fields:
    1. pernr
    2. ename
    3. effective_date
    I done all the necessary setup of BADI ,class, interface and form.
    I need the step to step guide where you create the adobe form using the Design Time for Processes and Forms. Anyone have any idea?
    Edited by: Siong Chao on Jan 3, 2011 4:54 AM
    Edited by: Siong Chao on Jan 3, 2011 5:00 AM

    Hi,
    I couldn't get to your query..
    What do you mean by step by step procedure for a design time & process for forms.
    if you are a beginner and looking for basic examples to implement adobe forms there are lot of them in SDN, please search them.
    let me know if your query was a very specific one.
    Cheers,
    Sai

  • File content conversion - sender adapter for Header and detail records

    Hi Experts,
                     I am receiving a field of fixed length content format.(Header)The first line of the file will follow the structure X having some fields and (DetailRecord)subsequent lines in the file will follow structure Y having somes fields.There is no record identifier for Header and Detail records.In one file first line is Header records and remaining subsequent line is DetailRecord.What are the parameters we have to set for sender file content conversion parameters as i donot have any key field and key field value.And in one file we have only one header records ( first line) and n number of detail records from 2nd line onwards.
    Thanks
    Deepak

    Hi
    Refer the below fourm link,
    Flat file whitout id
    Regards
    Ramg.

  • XML to Header and Body (DOMObject)

    I have written a DOMObject class that will take a Header and Body of a message and output it to an XML string. How would i go about turning an XML document back into a Message Header and Body - any thoughts?

    i don't think its that simple - is it? - what about using selectNodes and selectSingleNodes methods to extract the correct information from the XML document - however DOM doesn't have these methods?

  • Entering custom backend service in Design Time for Processes and Forms

    Hi all,
    I am trying to create a form that have 3 fields:
    1. pernr
    2. ename
    3. effective_date
    I done all the necessary setup of BADI ,class, interface and form.
    However I cannot seem to insert my custom backend service in the Design Time for Processes and Forms workbench (t-code:hrasr_dt).
    Currently, I am just using SAP_PA for my backend service which is unable to load the ename into my form. The code in my custom class will not be triggered if I did not use my custom back end service in the Design Time for Processes and Forms.
    Whenever I tried using my custom back end service, I will encounter the assertion_failed dump.
    Anyone have any idea?
    Edited by: Siong Chao on Dec 22, 2010 6:35 AM

    Hi Siong Chao,
    The filter name you have used in the BADI for your generic service requires to be defined in the Create / Edit Generic Service - Definition.( You can see this on selecting the Back-end services node under Form Scenario definition while using HRASR_DT transaction code)
    Once you do that, you can import the fields defined in the Generic service BADI - using the same procedure used in standard SAP backend sevices.
    Hope this clarifies. Please let me know if you have any further questions.
    Best Regards
    G Raj

Maybe you are looking for