RTI 815-A LabView Driver?

Does anybody know where I can get a LabView driver for Analog Devices
RTI-815-A IO-board?
Regards,
Wilfried

Dennis Knutson wrote:
Did you notice that you responded to 11 year old post? In any case Agilent did not become VXI Technologies. After the split of HP into a computer company (HP) and an instrument one (Agilent), Agilent sold all of their VXI product line when VXI sales dropped and newer technology such as PXI overtook it.
Hello Dennis,
Yes, I just hope RTR has not gottened disallusioned over the years. You and spercurio are correct of course about HP,Agilent,VXI Tech, and VTI. All of those companies are still around, just the VXI E1413 got handed off a few times.
Looks like PXI seams to have overtaken VXI years and years ago for sure.
Dennis, do you work much with PXI?
It is interesting that Agilent has recently jumped in to the PXI platform bigtime.
I own about thirty 18-slot PXI chassises with PXI embedded controllers.
All but one is PXI only, one is a PXIe chassis with a combination of PXI, Hybrid, and Express slots.
It gets frustrating trying to move from PXI to PXIe.
However Agilent has had an 18 slot all Hybrid Chassis for over a year now.
Looks absolutely awesome. Hope NI comes out with an all Hybrid Chassis soon.
Kevin.

Similar Messages

Labview driver for Analog Device cards RTI 800 series

Hello,
I'm Mathieu Meisser, from EPFL Lausanne - microtechnique.
I'm working for a company, that produces
laboratory PC-controlled analysers, sold all over the world.
we are searching for the Labview drivers for the I/O analog Device
cards RTI 815/817 in order to developp a new intrumentation control
with Labview 5.0.
It's very important to know if any kind of these drivers are
still avaible and work properly.
please let me know as soon as possible if you know
something about this !
thank you for your cooperation !
Mathieu Meisser
Sent via Deja.com http://www.deja.com/
Share what you know. Learn what you don't.

Hi Mohan,
Unfortunately there isn't a instrument driver specific to that device. What you could do though is use our NI-VISA driver and try to communicate with the instrument over serial (I assume it uses serial for communication) There are examples in the Example Finder (Help>>Find Examples) that ships with LabVIEW that will demonstrate some functions you can use. I hope this helps out.
Regards,
Michael
Applications Engineering
National Instruments

Drivers for Analog Devices RTI-815

Hi,
Does anyone know where I can find Labview drivers for an Analog
Devices RTI-815 card, if they exist?
The card came out of a Haake Rheocord System 90. The old
controller for it is a 286; we'd like to replace it with a newer computer
and software written in Labview. Thanks for your help.
-Nathan

Hi, thanks for the responses. I did a search on the 815 and 802, but I must admit, I neglected to search the forums for the AC28. All 3 cards are still available (although AD has discontinued their cards UEI manufactures replacement units) The company I work for has these cards in several test rigs, and I'm looking at options of modernising the PC & control software without incurring the cost of a complete control system retrofit (the current control software is DOS based). In view of performance & accuracy it probably makes sense to upgrade the cards and signal conditioning, but In the short term that would be a difficult proposition.
We also have other test machines which use labview, AD 5B signal conditioning, and Siemens profi connected I/O. Ideally if we were to look at a complete retro I would be keen to commonise as much equipment as possible. However, while the current hardware remains available, and performs adequately It will be quite difficult to justify.
SSK: Also, I would be interested in the code that was you utilised, if you could dig it up that would be a great starting point.
Mark: Thanks also for your post. I'll look into the driver kit, and most likely ask NI if they would consider writing some drivers at some stage.
Some links:
AC28:       http://www.opto22.com/site/pr_details.aspx?item=AC28&qs=100110021006,,,0,6
RTI-815:   http://www.ueidaq.com/products/pci-data-acquisition/uei-800/uei-815-32/
                 http://www.ueidaq.com/products/pci-data-acquisition/uei-800/uei-815/
RTI-802: http://www.ueidaq.com/products/pci-data-acquisition/uei-isa-ao/uei-802-8/

Where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.

where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.
if there is no driver maybe you can tell me the closest instrument that comes to this one from the list at,
http://search.ni.com/query.html?lk=1&col=alldocs&nh=500&rf=3&ql=&pw=595&qp=%2BContentType%3AInstrumentDriver+%2BIDNetManufacturer%3A%22Hewlett-Packard%22&qt=peak+power+analyzer&layout=IDNet
so i could modify and use the driver

Hello,
It looks like Agilent/HP makes the 8990A, but I was not able to find a driver for it that we or Agilent has written for this device.
Since I am not familiar with the 8990A, I cannot recommend which drivers might be similar, but you are pointed in the right direction. Agilent themselves might know more about which models use similar command sets so that you can modify a driver easily.
Hope this helps.
Scott B.
Applications Engineer
National Instruments

Is there any LabVIEW driver for the Agilent 53147A counter/power meter?

I am trying to find a LabVIEW driver for the Agilent 53147A counter/power meter, but I cannot find it. Is there any?

NI does not have a driver and a quick check with Agilent shows that they don't have a driver either.
You can go to http://www.ni.com/devzone/idnet/ and request a driver. You will also find links on how to create your own driver. Your other option is to use the Instrument I/O Assistant.
p.s. In the future, you should use the Instrument control board for posting questions. this board is for NI counter/timer products.

Labview Driver and manual for HP3437A

Hi,
anyone knows if a labview driver for HP3437A exist and where i can get it?
I also need a manual, but I can not find anything on the HP homepage about
measurement devices.
Thanks, Niko

Hi Niko
Check this site for downloading over 2000 instrument drivers from different vebdors: http://www.ni.com/devzone/idnet/default.htm
You'll find the driver for the HP3437A here: http://zone.ni.com/idnet97.nsf/9b2b33e1993d877786256436006ec498/c314c0df1a13834b862568ab005fb92d?OpenDocument
Regards,
Luca
Regards,
Luca

[BUG] Agilent ESA PSA Series LabVIEW driver for Models E4401B and E4402B

Agilent ESA PSA Series LabVIEW driver are not working with Models E4401B and E4402B.
Driver Version 2.1.1
LabVIEW: 2009
Web Link: http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=309EBE8FF8BC0E76E0440003BA7CCD...
Problem: ID Query in "Agilent ESA PSA Series.lvlib:Initialize.vi". ID Answer from Instrument is not match with strings in Match Array. Somebody left whitespace at the strings end. ("Hewlett-Packard,\sE4401B\s" and "Hewlett-Packard,\sE4402B\s").
Everything else is working well.

Hi JCC,
Thanks for bringing this to our attention, a Corrective Action Request has been created: CAR - Corrective Action Request - #247239 and a member of R&D will take a look into this to get the issue resolved.
Kind Regards,
Applications Engineer

RS232 Labview driver for SR830 lockin Amplifier

Hi,
I want to install Labview driver for Stanford Research SR830 lockin amplifier for RS232 port. NI has drivers for GPIB but I could not find any for RS 232 comm port.
Please let me know how can I find driver for RS232 port.
Regards,
Nitin

Dear Jason S,
I also want to communicate with sr 830 with the RS232 interface. You said I had to rewrite the whole thing. What does that really mean? Rewrite the driver? If so, what language will it be?
JasonS' wrote:
Hello Nitshu-
As you mentioned, this driver only supports GPIB, and not RS-232. This driver was originally created in 1994, so it was not created using VISA. This means that to convert this driver you would need to essentially rewrite the entire thing. There are not currently any plans to update this driver to support RS-232, but you could easily communicate with it by adding a GPIB Interface to your system.
Let us know if you have any specific questions we can help answer.
Jason S.
Applications Engineer
National Instruments
Thank you for answering my question

Can Labview 7.0 control an instrument without the labview driver?

hellow,i have an instrument which do not have the labview driver,its output signal is RS232,so can i use labview7.0 to read the signal? thanks!

You sure can. There is a popular program to check on serial hardware, the loopback.vi. It sends out a signal and reads in a signal. You can modify the vi to send a signal to whatever you need to or receive a signal from whatever you want to. So if you just have an output signal to read in you can modify it to just read in that output signal into a graph or anything you'd like. So you could just get rid of "serial port write.vi" or that entire sequence if you wanted to. I hope that helps.
Attachments:
LoopBack.vi ‏42 KB

Looking for LabVIEW driver for Agilent (HP) 4349B High Resistance Meter

I've been looking for a LabVIEW driver for Agilent (HP) 4349B High Resistance Meter.
Does anyone have one?
Thanks,
Avner

Hello,
It looks like you'll get a reply by Friday; if not repost and I'll follow up for you
Thank you,
JLS
Best,
JLS
Sixclear

Labview driver for HP 8560 EC Spectrum Analyzer

I'd appreciate it very much if somebody help to find
Labview driver for HP 8560 EC Spectrum Analyzer using GPIB.

Unfortunately I was unable to find a driver for this instrument either. This leaves you with one of a couple options. First, I would like you to submit a request for this driver at:
http://zone.ni.com/idnet/other.htm
We develop drivers based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one.
If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
http://zone.ni.com/idnet/development.htm
We also have a syndicate of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would sugg
est contacting one of the Alliance members at:
http://www.ni.com/alliance
Good Luck.
Kim L.
Applications Engineer
National Instruments

URGENT: please help to convert Tektronix TDS754C Labview driver 7.0 to 6.1

Hello,
Could someone please try to convert Labview 7.0 driver to a version 6.1?
I attached Tektronix TDS 754C Labview driver 7.0 below.
Or National Instruments, please provide me with Tektronix TDS754C Labview 6.1 driver.
Thanks to everyone in advance,
Al.
Attachments:
tktds7xx.zip ‏1732 KB

Try this. The error was just because the functions are part of the LabVIEW distribution and had nothing to do with converting the driver.
Attachments:
tktds7xx_61.zip ‏1414 KB

Download HP34970A labview driver

Hello,
When I download Agilent 34970A labview driver and extracted it in my C:\TEMP folder, I couldn't open the labview example; it keeps LOADING and SEARCHING the file.
There is a message when I open the labview library '[warning: has been deleted, renamed or removed on dis]" it appears every single file.
Please help.
Ken

Yes it needs to be in labview\instr.lib folder.
Some more info here:
http://zone.ni.com/reference/en-XX/help/371361J-01/lvmeasconcepts/installing_an_instrument_d/
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

AG53131A labview driver

Hi guys,
is that anyway to get the labview driver for Agilent 53131 frequecy counter as attahced. I download the driver from NI but unable to control the devices even it is in remote state already. Appreciate if somebody can provide help.
thanks,
BS
Attachments:
AG53131A.JPG ‏38 KB

I use the example in the driver i had download. After 2nd time read the measurement, the counter seem like no response and if i configure 2 different function(EX: freq, Period) in different channel also face problem.

Labview driver for agilent 8164A tunable laser

I'm working on a project that involves setting up our Agilent 8164A lightwave measurement system in labview. I cannot locate the driver software on the NI website. Please let me know where I can download the driver for this equipment. Thanks.

Actually we don't have a driver for that instrument in our website, so that means that we also don't have it in the CD. So you may want to check the Agilent's website, or as a matter of surprise, I found in our database one document that was talking about some past issue and it involved the 8166 instrument, so the author attached the driver for this instrument so we can reproduce what he found out, so I'm attaching this file here which is the file the previous Sr. mention, "hp816x", I installed it in my computer and run it and it is an Agilent made driver, so you can use this one or try to contact the Agilent people. Also you may request a LabVIEW driver been made for this instrument, please see the details at: O
ther Driver's Resources from our download site.
Good luck!
Nestor Sanchez
Applications Engineer
National Instruments
Nestor
National Instruments
Attachments:
816x.exe ‏2875 KB

RTI 815-A LabView Driver?

Similar Messages

Maybe you are looking for