[RTM] Aero Peek not available or not working

hello, I have Ultimate Final from my MSDN subscription installed. First I installed it on a notebook (C2D, Nvidia 9600GS) and got to see Aero and it's features. Especially: Aero Peek.
Now I have it also installed on my Desktop - a much more powerfull PC (3GHz 4 core, Nvidia 8800GT). Aero Performance Index is 6.9. I have choosen an aero theme and Aero is basically working (transparency, snapping etc.). What is not working is Peek :( That means: I hover the mouse over the "Show Desktop" on the taskbar but get no transparent windows. I hover the mouse over a window preview on the taskbar but do not get the "show this window and make all others transparent".
And what's weird: The setting in the Taskbar properties is checked but grayed out/readonly. Also, in the context menu on the "Show Desktop" Button in the taskbar, the "Preview Desktop" entry is checked but grayed out/readonly.
In short: Desktop Preview (Peek) is "Enabled" but not working and I cannot change the setting.
What could be the reason for this?
Desktop machine is a dual screen setup. I disabled one screen but this made no difference. I switched between various themes but still no difference. I found a hint to a registry key, something in the line of "desktopPreviewDisabled" and it is set to "0" (=enabled as all the checkboxes indicate). I did set it to 1 and back to 0 - no difference.
Help please

Update: Peek does work with a second (the admin) user that has still all default settings.
With my normal user account I played around a lot to make it fit my needs. Now I really wonder which change caused Peek to not work anymore?
my aero peek was greyed out, I tweaked with theme fonts and a few theme settings then checked aero peek, It was ticked and UNTICKABLE it works now, lol haha create a new profile gimme a break geta clue, besides reg fixes abound for these greyed out
type of instances its always fixable one way or another, specially with a reg script to change the greyed out to usable tickable option once again, anyway safemode it if you have to and get your windows aero peek back peace out and stop blabbing about creating
a new profile for this troublesome greyed out aeropeek good lord you guys some of ya are far too extreme and way off base and troubleshooting resoultions to mundane issues... peace out njoy your pc time get multimedia tool heaven ...<<< www.mowtools.ourtoolbar.com
from novice beginner way up to xtreme pc elit power hungry users will find all the multimedia on and offline apps in this fine toolbar lifesavers get it while its f free peace out!
Long time WinXP user, skipped Vista and starting to like 7
Hi
Try the Aero troubleshooter.
Open Control Panel/Troubleshooting.
Under Appearance and Personalization, select the Display Aero desktop effects.
In the Troubleshooter dialog, click the Advanced link and place a
check mark in the Apply Repairs Automatically option.
Click Next to run the troubleshooter.
Let us know the results.
Thank You for testing Windows 7
Ronnie Vernon MVP

Similar Messages

How can I fix my iphone's sound I plugged it in to my radio and the sound came out fine but when I took it out the volume bar dissapered and ever seince all it says volume not available, but it work with headphones in. What can I do to fix it?

How can I fix my iphone's sound I plugged it in to my radio and the sound came out fine but when I took it out the volume bar dissapered and ever seince all it says volume not available, but it work with headphones in. What can I do to fix it?

Try reset all settings.
Settings > General > Reset > Reset all settings. It won't delete any data.

I can't connect to Time Capsule- error message: Backup disk is not available. Was working fine before.

I can't connect to Time Capsule- error message: Backup disk is not available. Was working fine before.

Restart it.. Does this all the time with Lion and even worse ML.
Restart the whole network if that doesn't work.. do it in correct order.. from off.. modem.. TC.. clients 2min gap.

BEx Transport Requests '' ist not available or not suitable

hi, all,
I want to change a query, that has been transported back from Prod.System into TestSystem. Changes in the query aren't possible - the error message is
" BEx Transport Requests '' ist not available or not suitable ".
Now, there is a Standard BEx Transport Request and, in the RSA1 -> Transport Connection I see the query complete with that Transport Request.
What can the reason be? Any Idea?
Thanks a lot in advance.
neven

Ciao, Paolo,
thank you for the quick responce.
I did exactly as described :
The easiest thing to do is the following:
1) collect your query in transport connection
2) check if it is already assigned to a transport
2a)if assigned to a transport check if this is the standard bex transport. If so go to step 3, If not see if you should just tranport that request (or you can just go to step 3...but i wouldn't advise that)
3) unlock the standard bex request
4) now go back to transport connection and put the collected objects in a new request
5) release and transport your new request
It still doesn't help. I can't change the Query. The error-message is stil the same.
best regards
neven

Opening Query: u0091BEx transport request '' is not available or not suitable"u0092

Hello,
I tried was able to run and modify a query last week. When I try to modify/run it now, it gives the message below and allows me to run it but not modify.
BEx transport request '' is not available or not suitable"
What are the possbile causes and remedies to this problem?
Thanks in advance.

dear Amanda,
here can imply 'copy' since as the result objects(query and elements) in production are exactly same with dev. but the terms 'copy' itself in query normally refer to copy query from one infoprovider to another infoprovider.
(transaction rszc).
i think she mean the query objects included in transport request and will be carried on to qa/production server.
once the new queries 'placed on transport'(in request), we must immediately create a bex request for the same package, otherwise nobody can save their queries (that included in the request).
transport bex
http://help.sap.com/saphelp_nw2004s/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
copy query
http://help.sap.com/saphelp_bw33/helpdata/en/9f/f57539d6d1c93be10000000a114084/frameset.htm
hope this helps.

U0093BEx transport request u0091ABC3005000u0092 is not available or not suitableu0094

Hi,
In our development, I tried to modify an old report but got the message
BEx transport request ABC3005000 is not available or not suitable
and opened up in BEx but in a read only mode.
My goal was to modify this report.
I therefore spent time to create a new report just like the original report with my modifications. On the next day, I wanted to make some changes in the new report but in opening it, I got the same message as the original one:
BEx transport request ABC3005000 is not available or not suitable
What seems to be going on? What can I do to be able to make modifications in BEx
without this massage?
The switch Change mode is no available to switch.
I assume it implies that the query has been transported already so it wont allow additional changes, but why it the same problem with the new one just created?
Thanks

Hi,
I went through the steps you suggested:
RSA1 -> Transport Connection
Create transport requests for Bex (BEx truck icon); I double-clicked on a package (click on Assign/Delete) and created a new transport request AABB555.
The problem is that, right after that when I open BEx, select Add-Ins, Open Queries, it attempts to open but instead of bringing up the list of queries for selection to attempt to edit, BEx flashes and freezes up.
Then from there BEx freezes up. Any ideas?
I went into se09 and deleted the new transport request AABB555;
Now, BEx can open up the queries instead of the freezing up, but it gives the message:
"BEx transport request 'AABB555' is not suitable or available. Request/task AABB555' does not exist"
When I choose OK, it brings me into the query but still only in read only mode and can't edit.
Any more ideas?

BEx Transport Request is not available or not sitable

Hi,
When i try to install some queries from Business Content in the BW DEV box, the error was :
<b>BEx Transport Request is not available or not sitable</b>
Please let me know what has to be done in order to get out of this error
Thanks & Regards,
Kishore

Hi Ken,
Thanks for responding to my problem.
You are right. I am installing from business content queries that have never been installed before.
so when i am installing the queries from business content the error was :
BEx transport request is not suitable or not available.
How to proceed now ?
Please give reply ASAP....
Thanks & Regards,
Kishore

Critical BitLocker Drive Encryption system files are not available- which was working earlier.

Hello All,
The E drive (external USB drive) of server which was encrypted using bitlocker. earlier it was working perfectly fine. On running the BitLocker configuration screen we are getting with a message stating that ‘Your system
volume is not configured correctly to allow you to use BitLocker Drive Encryption. Critical BitLocker Drive Encryption system files are not available’
now whenever we are clicking on E drive it is showing to format the disk.
can anyone help me to understand which are the files required or repair for bitlocker?
Thanks & Regards,
MAsud Hussain

Hi Masud,
Do you have any progress at the moment?
If there are any related error messages in Event Logs, please post them out for further analyzing.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Proces not available from Contingent Worker Self Service

HI ,
There is a Oracle given functionality to Hire COntingent Workers called 'Contingent Worker Placements'.
I have added this functionality under Employee and Manager. but when i try to add the same functioanlity under the Contingent Worker Self Service Responsilbility, I get the following error,,
The XXCHR Contingent Placement Mgr function is not available under the Contingent Worker Self Service responsibility
Please help as soon as possoble.
Regards,
Preeti

Now I can see my custom layout... Thanks a lot
Would you please help me also viewing a new comment field..
I did the followings:
* Creating a new context called (NewComment) under the DFF OTL Information Types, It include only one segment called LineComment saved in Attribute1.
I added the following to the ldt file:
# Comment Field
BEGIN HXC_LAYOUT_COMPONENTS "Payroll Timecard Layout - Comments Field"
    OWNER = "ORACLE12.1.0"
    REGION_CODE = "HXC_CUI_TIMECARD"
    REGION_CODE_APP_SHORT_NAME = "HXC"
    ATTRIBUTE_CODE = "HXC_CUI_TIMECARD_COMMENTS"
    ATTRIBUTE_CODE_APP_SHORT_NAME = "HXC"
    SEQUENCE = "190"
    COMPONENT_DEFINITION = "TEXT_FIELD"
    RENDER_TYPE = "WEB"
    PARENT_COMPONENT =
   "Payroll Timecard Layout - Header Table Layout Component"
    ATTRIBUTE1 = "TOP"
    LAST_UPDATE_DATE = "2004/05/24"
    BEGIN HXC_LAYOUT_COMP_QUALIFIERS "Payroll Timecard Layout - Comments Field"
      OWNER = "ORACLE12.1.0"
      QUALIFIER_ATTRIBUTE_CATEGORY = "TEXT_FIELD"
      QUALIFIER_ATTRIBUTE1 = "N"
      QUALIFIER_ATTRIBUTE2 = "Y"
      QUALIFIER_ATTRIBUTE3 = "50"
      QUALIFIER_ATTRIBUTE4 = "3"
      QUALIFIER_ATTRIBUTE5 = "2000"
      QUALIFIER_ATTRIBUTE18 = "EXCLUDE"
      QUALIFIER_ATTRIBUTE19 = "|CSV|"
      QUALIFIER_ATTRIBUTE20 = "N"
      QUALIFIER_ATTRIBUTE21 = "Y"
      QUALIFIER_ATTRIBUTE22 = "R"
      QUALIFIER_ATTRIBUTE25 = "FLEX"
      QUALIFIER_ATTRIBUTE26 = "NewComment" --> the name of the context
      QUALIFIER_ATTRIBUTE27 = "Attribute1"
      #QUALIFIER_ATTRIBUTE28 = "LineComment" --> the name of the segment
      LAST_UPDATE_DATE = "2004/05/24"
    END HXC_LAYOUT_COMP_QUALIFIERS
END HXC_LAYOUT_COMPONENTS
the file uploaded successfully but i can not see any changes, no comment shown?!!

"battery not available", battery not charging

I just bought a NuPower battery fo my IBook G4. It's been working fine for a month or so. However, now my computer won't charge the battery. Near the battery icon at the top of the screen, it at first says "caluculating..." and then says "battery not available". Further, sometimes even when the power cord is plugged in (and the LED's are lit up), it still runs on the battery power and says the power is not plugged in. And, the lighting on the LED's do not correspond at all with the battery charge(i.e. it is sometimes green even though there is no battery power). Maybe these are 2 different problems?
Any advice would be appreciated-I'm no where near a MAC service provider.

There are two things you could try.
1. "Resetting PowerBook and iBook Power Management Unit" (PMU)
Performing a PMU reset returns the iBook and PowerBook hardware, including NVRAM,
to default settings and forces the computer to shut down. ...
http://support.apple.com/kb/HT1431 - 36k - Cached - Similar pages
2. "Calibrating your computer's battery for best performance"
The battery needs to be recalibrated from time to time to keep the onscreen battery
time and percent display accurate. With all iBooks and PowerBook G4 ...
http://support.apple.com/kb/HT1490 - 27k - Cached - Similar pages
"Mac OS X 10.4 Help: Calibrating an iBook or PowerBook battery"
If you have an iBook or PowerBook portable computer, you should calibrate the
battery to get the longest running life during the first week you have your ...
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1959.html -
Also, you may see what the computer's power and battery life look like in
the Profiler's energy/battery logs. Some widgets are good for battery info.
The battery seller may have some kind of support, since that part is not
an original replacement part and may have issues of its own. Sometimes
the recalibration and pmu resets will help new batteries work properly.
Good luck & happy computing!

VPN service not available or not responding - Please help!!

For years, I was using VPN AnyConnect without much of a problem. I have an older Gateway 500XL Desktop PC that has functioned well for me since 2004. I have only had to replace the hard drive once. I did upgrade the memory from 512MB to 2 GB recently. I was using Verizon FIOS for my internet connection but recently moved and am now using Cox Communications High Speed service which is doing 5MB per second on the download side. Shortly after the move, I began to develop connection problems with my VPN. I would get the 'service not available' or 'VPN not responding' messages. If I tried to uninstall and then reinstall, the VPN would work again BUT once I disconnected, I would get the above referenced messages again if I tried to reconnect. So I would unistall and reinstall every time in order for it to work and then just leave it running all day rather than disconnect. This all started happeing in Oct. and then more recently, it would magically start reconnecting again without me having to reinstall it so I was happy the problem seemed to go away. However, now, within the past week, I could not get it to work at all, even after reinstalling! So, I am completely out of options. I need to have this up and running again very soon for work reasons.
Since Oct., I have tried multiple things. Initially, the router that Cox gave me was bad after the guy installed it incorrectly (without me realizing it) and it became faulty. Got a new router, but that did not change the VPN problem. I have McAfree Anti-Virus. I tried uninstalling it to see if it was conflicting somewhere but that changed nothing for the VPN. I downloaded malwarebytes and ran scans with that and McAfree full scans but did not have any malware or problems on the PC. I tried to check the PC disk for errors and came up empty there. Cleaned out caches and all that with no change. When I look at the network connections panel on my PC, I can see the AnyConnect link is set up but it will say 'disabled'. When I try to 'enable' it, it will not allow it (a message window pops up but I forget what it says). WHY? I think this is the problem. Is there something corrupted with my PC's ability to establish network connections? Is this something that can be fixed? I know the PC is older and XP will not be supported any longer but none of this make sense. If I could previously connect after installing but ONLY the first time connecting, something is happening to break the network connection on my PC but I have no idea. I tried using the windows network connections troubleshooting tool but came up empty there.

For years, I was using VPN AnyConnect without much of a problem. I have an older Gateway 500XL Desktop PC that has functioned well for me since 2004. I have only had to replace the hard drive once. I did upgrade the memory from 512MB to 2 GB recently. I was using Verizon FIOS for my internet connection but recently moved and am now using Cox Communications High Speed service which is doing 5MB per second on the download side. Shortly after the move, I began to develop connection problems with my VPN. I would get the 'service not available' or 'VPN not responding' messages. If I tried to uninstall and then reinstall, the VPN would work again BUT once I disconnected, I would get the above referenced messages again if I tried to reconnect. So I would unistall and reinstall every time in order for it to work and then just leave it running all day rather than disconnect. This all started happeing in Oct. and then more recently, it would magically start reconnecting again without me having to reinstall it so I was happy the problem seemed to go away. However, now, within the past week, I could not get it to work at all, even after reinstalling! So, I am completely out of options. I need to have this up and running again very soon for work reasons.
Since Oct., I have tried multiple things. Initially, the router that Cox gave me was bad after the guy installed it incorrectly (without me realizing it) and it became faulty. Got a new router, but that did not change the VPN problem. I have McAfree Anti-Virus. I tried uninstalling it to see if it was conflicting somewhere but that changed nothing for the VPN. I downloaded malwarebytes and ran scans with that and McAfree full scans but did not have any malware or problems on the PC. I tried to check the PC disk for errors and came up empty there. Cleaned out caches and all that with no change. When I look at the network connections panel on my PC, I can see the AnyConnect link is set up but it will say 'disabled'. When I try to 'enable' it, it will not allow it (a message window pops up but I forget what it says). WHY? I think this is the problem. Is there something corrupted with my PC's ability to establish network connections? Is this something that can be fixed? I know the PC is older and XP will not be supported any longer but none of this make sense. If I could previously connect after installing but ONLY the first time connecting, something is happening to break the network connection on my PC but I have no idea. I tried using the windows network connections troubleshooting tool but came up empty there.

Requested resource not available - can not find servlet

I have an application in tomcat that uses jsp and servlets. The JSP works fine, but I keep getting a "requested resource not available" erroe when i try to access a servlet. My jsp is in a directory called ProjectManager, and my servlet classes are in WEB-INF/classes inside ProjectManager and are in a package called pmt.
I can access my jsp using localhost:8080/ProjectManager/index.jsp, but I cannot seem to access the servlets, regardless of the URL I try. I've tried adding a servlet-name and a servlet-mapping in the web.xml file but I'm still stuck.
Does anybody have any ideas?
Thanks in advance.

What jar files should be in the library? I have the following:
commons-lang-2.4(2).jar
mysqlconnector-java-5.1.6.bin.jar
webserviceutils.jar
Here is my web.xml as I too am getting "the request resource....cannot be found:
<?xml version="1.0" encoding="UTF-8"?>
<web-app id="WebApp_ID" version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
     <display-name>
     classBlog</display-name>
     <servlet>
          <description>
          </description>
          <display-name>
          DriverServlet</display-name>
          <servlet-name>DriverServlet</servlet-name>
          <servlet-class>
          edu.ec.web.classBlog.DriverServlet</servlet-class>
     </servlet>
     <servlet>
          <description>
          </description>
          <display-name>
          AddEntityServlet</display-name>
          <servlet-name>AddEntityServlet</servlet-name>
          <servlet-class>
          com.ec.blog.web.AddEntityServlet</servlet-class>
     </servlet>
     <servlet>
          <description>
          </description>
          <display-name>
          DeleteEntityServlet</display-name>
          <servlet-name>DeleteEntityServlet</servlet-name>
          <servlet-class>
          com.ec.blog.web.DeleteEntityServlet</servlet-class>
     </servlet>
     <servlet>
          <description>
          </description>
          <display-name>
          EditEntityServlet</display-name>
          <servlet-name>EditEntityServlet</servlet-name>
          <servlet-class>
          com.ec.blog.web.EditEntityServlet</servlet-class>
     </servlet>
     <servlet>
          <description>
          </description>
          <display-name>
          ViewBlogServlet</display-name>
          <servlet-name>ViewBlogServlet</servlet-name>
          <servlet-class>
          com.ec.blog.web.ViewBlogServlet</servlet-class>
     </servlet>
     <servlet>
          <description>
          </description>
          <display-name>
          ViewEntityServlet</display-name>
          <servlet-name>ViewEntityServlet</servlet-name>
          <servlet-class>
          com.ec.blog.web.ViewEntityServlet</servlet-class>
     </servlet>
     <servlet>
          <description>
          </description>
          <display-name>
          AddEntryServlet</display-name>
          <servlet-name>AddEntryServlet</servlet-name>
          <servlet-class>
          com.ec.blog.web.AddEntryServlet</servlet-class>
     </servlet>
     <servlet>
          <description>
          </description>
          <display-name>
          DeleteEntryServlet</display-name>
          <servlet-name>DeleteEntryServlet</servlet-name>
          <servlet-class>
          com.ec.blog.web.DeleteEntryServlet</servlet-class>
     </servlet>
     <servlet>
          <description>
          </description>
          <display-name>
          EditEntryServlet</display-name>
          <servlet-name>EditEntryServlet</servlet-name>
          <servlet-class>
          com.ec.blog.web.EditEntryServlet</servlet-class>
     </servlet>
     <servlet>
          <description>
          </description>
          <display-name>
          ViewEntryServlet</display-name>
          <servlet-name>ViewEntryServlet</servlet-name>
          <servlet-class>
          com.ec.blog.web.ViewEntryServlet</servlet-class>
     </servlet>
     <servlet-mapping>
          <servlet-name>DriverServlet</servlet-name>
          <url-pattern>/DriverServlet</url-pattern>
     </servlet-mapping>
     <servlet-mapping>
          <servlet-name>AddEntityServlet</servlet-name>
          <url-pattern>/AddEntityServlet</url-pattern>
     </servlet-mapping>
     <servlet-mapping>
          <servlet-name>DeleteEntityServlet</servlet-name>
          <url-pattern>/DeleteEntityServlet</url-pattern>
     </servlet-mapping>
     <servlet-mapping>
          <servlet-name>EditEntityServlet</servlet-name>
          <url-pattern>/EditEntityServlet</url-pattern>
     </servlet-mapping>
     <servlet-mapping>
          <servlet-name>ViewBlogServlet</servlet-name>
          <url-pattern>/ViewBlogServlet</url-pattern>
     </servlet-mapping>
     <servlet-mapping>
          <servlet-name>ViewEntityServlet</servlet-name>
          <url-pattern>/ViewEntityServlet</url-pattern>
     </servlet-mapping>
     <servlet-mapping>
          <servlet-name>AddEntryServlet</servlet-name>
          <url-pattern>/AddEntryServlet</url-pattern>
     </servlet-mapping>
     <servlet-mapping>
          <servlet-name>DeleteEntryServlet</servlet-name>
          <url-pattern>/DeleteEntryServlet</url-pattern>
     </servlet-mapping>
     <servlet-mapping>
          <servlet-name>EditEntryServlet</servlet-name>
          <url-pattern>/EditEntryServlet</url-pattern>
     </servlet-mapping>
     <servlet-mapping>
          <servlet-name>ViewEntryServlet</servlet-name>
          <url-pattern>/ViewEntryServlet</url-pattern>
     </servlet-mapping>
     <welcome-file-list>
          <welcome-file>index.html</welcome-file>
          <welcome-file>index.htm</welcome-file>
          <welcome-file>index.jsp</welcome-file>
          <welcome-file>default.html</welcome-file>
          <welcome-file>default.htm</welcome-file>
          <welcome-file>default.jsp</welcome-file>
     </welcome-file-list>
</web-app>

Existing IMAP notes not available in notes app after mountain lion installation

After today's mountain lion upgrade (from lion) my notes stored on an IMAP server are not available in the new notes app. The folder of the IMAP Account itself is shown but appears empty. On my Iphone all notes of the IMAP Account are shoen correctly as well as on another mac still running lion.
Any Suggestions?
Thanks in advance.

Okay, I assume there are some different reasons for the syncing problem.
I got my notes syncing again by just losing the prefix on my iPhone and renaming the existing notes folder. For those with a similar problem, here's how:
Old situation:
Within OS X Lion I used a Gmail account with notes (IMAP). To avoid a messy layout with the Gmail folders I used [Gmail] as IMAP Path Prefix (found under Accounts, tab Advanced).
Under iOS5, 'Notes' was ticked on under the Gmail account. The result: Apple created a IMAP folder '[Gmail]/Notes' to store all notes.
New situation:
After upgrading to OS X Mountain Lion I ticked 'Notes' under the Gmail account within system prefs, 'Mail, Contacts & Calendars'. The new Notes app remained empty and didn't show my existing notes that were still on my iPhone.
Logging in to www.gmail.com reveiled a new folder created by Mountain Lion: 'Notes'. The existing notes folder was named '[Gmail]/Notes' - because I used the [Gmail] prefix - and contained al the existing notes.
So Mountain Lion syncs with the IMAP folder 'Notes' and the iPhone syncs with the folder '[Gmail]/Notes'
In Lion the Mail settings were used for both Mail and Notes. So the IMAP prefix applied to both.
In Mountain Lion, the IMAP prefix only applies to Mail, not to Notes.
New situation, fixed:
As Mountain Lion can only use a folder called 'Notes' for syncing, I had to change the folder my iPhone was syncing with: '[Gmail]/Notes'. I removed the newly created folder 'Notes' via www.gmail.com under the label settings and renamed label '[Gmail]/Notes' to 'Notes'. After that I removed the IMAP prefix '[Gmail]' from my iPhone Gmail (advanced) account settings, making the iPhone sync notes with the folder 'Notes' instead of '[Gmail]/Notes'. That's it.
Btw, I maintained the use of the prefix within Apple Mail under Mountain Lion as that is totally separated from the Notes section.
Hope this helps.

Why is the iPad 3 not available? Not even the tech specs!

Why isn't the iPad 3 available? Not even the tech specs!

There have been five iPad models: the original iPad, the iPad 2, the third generation iPad, the "iPad with Retina display" and the iPad Mini.
http://store.apple.com/us/browse/home/shop_ipad/compare
The original iPad and the third generation iPad have been discontinued. There is not now, nor has there ever been, an iPad 3 so if you are searching for technical specifications look for iPad (3rd generation).
Identifying iPad Models

Bex Transport request is not available or not suitable

Guys,
I need to make changes to query when I open it...it's saying Transport req is not available. So I have collected the query in a new transport in transport connection, but when I go back to the query its still giving the same error message. How do I resocve this error?
The transport it is showing in the query was deleted, so I cannot use the old transport.
Thanks,
Kris

Hello Kris,
What Mahesh said will solve your issue but once you transport that request you will again get the same error when you open any query in BEX. One way to get around this issue is for the first time create a request using the BEX transport button in transport connection and always keep this request open. If you want to transport a query that is assigned to this request just unlock this request using se03 and then collect your query and the corresponding objects in a new request in transport connection and transport the new request. This way atleast everytime you open a query you will not get the error.
Hope this helps.
Thanks

[RTM] Aero Peek not available or not working

Similar Messages

Maybe you are looking for