Rtmp vs. rtmpt - FMLE 3 only can connect via rtmpt not rtmp

I'm trying to stream live video to our FMIS 3.5 using FMLE 3 and the only way it will work and connect is if the FMS URL parameter uses "RTMPT://" not "RTMP://". Question is this a configuration problem with the FMIS? If so, how can I correct it.
Or is network/firewall preventing it from working? If so what does are net admins need to allow to make this work?
Can I get away with using the RTMPT protocol for streaming live high action video (basketball game) or do I need to use RTMP protocol to be successful?
I'm just getting started with Flash Media coming from WIndows Media.
Thanks,
Dave

Are you sure that there is no modification done at FMS end. How are you concluding that other clients are still able to play, i suppose looking at access.00.log, do you see particular client playing a stream for sometime and new client connecting and playing stream. Can you try from any other machine if you access to? I should say it looks like strange issue , but if you can provide above asked info, probably we might be able to nail it down.

Similar Messages

TS1368 Just changed modems, can connect via wifi with my phone to surf net, but can no longer connect to apple ap store?

Just changed modems, can connect via wifi to surf the net, but can't connect via wifi to update aps in iTunes store

OK thanks, I thought that maybe some of the iphone 3s were not able to connect to Wifi,

My ipod touch only connects via wifi, not via cable. The cable works with my iPad, so it's not that. Help?

My ipod touch (4th G) only connects via wifi, not via cable. The cable works with my iPad, so it's not that. Help?

1. Turn the router, iPad and printer off.
2. Turn on the router and then wait 30 seconds to let it complete its start-up process.
3. Turn on printer and then wait 30 seconds to let it complete its start-up process.
4. Turn on your iPad and test print.

Why java only can display GIF file not jpeg and BMP ??

Did anyone know why java only can display GIF file not in jpeg and BMP ?? This is because the quality of GIS is not as good as Jpeg and BMP
any code to load the display process ??
thx guys !!!

you can do jpegs but im not sure about bmps.
The only thing ive noticed is that java cant support transparent jpegs, only transparent gifs
Jim

I have an Apple AirPort Extreme Base Station (Simultanious Dual_Band) (MC340LL/A), and updated the software. After updating no devices can connect via wifi. Any suggestions.

I have an Appl,e AirPort Extreme Base Station (Simultaneous Dual_Band( MC340LL/A. After updating the software, no devices can connect via wifi.

As suggested in another discussion area, (AirPort), I reset the AEBS to factory defaults. On the TV, I went to >Settings>General>Network>Configure Wireless>Wireless Networks. I could then see the generic "Apple Network xxxxx" on the TV. From my MacBookPro, I verified that I could connect to the TV by launching iTunes and noting that the TV was now visible in the "Devices" menu. Went back to the AEBS and ran through the "Setup" routine. I did NOT use the "Previous Settings" but instead, saved the old settings profile, created a new wireless network and new settings profile and enabled WPA2 Personal encryption. I then went back to the TV and went through the "Settings" routine again (as noted above). This time, after entering my WPA2 password, the TV connected to the network and problem was solved. Thanks.

Can Connect via Database Control but Cannot Connect from Enterprise Manager

Hi experts,
This is a 10g database on a Windows server.
when I remote into the server:
- I CAN connect via the web-based Database Control
- I CANNOT connect to any db/instance via regular Ent Mgr - get the ugly "ORA-12154 TNS: could not resolve the connect identifier specified" error.
I thought both tools used the same connection files (tnsnames, listerner etc), but maybe not.
When db control connects, but Enterprise Manager cannot, what should I check to find the problem?
Thank you.
John

Thanks madrid.
I eventually got it to work by changing the tnsnames.ora in the client_1 folder
This is the original:
FS9ENFP1 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = PNCLAFDB)(PORT = 1521))
(CONNECT_DATA =
(SID = FS9ENFP1)
(SERVER = DEDICATED)
ORCL=
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = PNCLAFDB)(PORT = 1521))
(CONNECT_DATA =
(SID = orcl)
(SERVER = DEDICATED)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
I removed the EXTPROC entry and added entries for the ORCL and FS9ENFP1 databases, specifying server_database like this:
FS9ENFP1_PNCLAFDB =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = PNCLAFDB)(PORT = 1521))
(CONNECT_DATA =
(SID = FS9ENFP1)
(SERVER = DEDICATED)
Not really sure WHY it is necessary to list an instance twice, once without server name and another with server name... but EM is able to connect now. I simply modeled tnsnames after another Oracle server where EM was able to connect.
John

I cannot connect to the internet, I get a message that "connot connect to the proxy server. My firefox will not connect, I can connect via aol.

cannot connect to internet via firefox, can connect via aol, firefox was conneting before, now I get "connot connect to proxy setting"

You can find the connection settings in Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select "No Proxy" if the default "Use the system proxy settings" setting doesn't work.
See "Firefox connection settings":
* https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can

If I choose any i-works draft, I only can get one page not the complete draft

If I choose any i-works draft, I only can get one page not the complete draft

Mousing shows all the available pre-formatted page available in each template to give you an idea what is there, but you only get one, sometimes 2, when you create a new document. All of the other pages can be accessed via the Insert menu. Insert > Sections in word processing & Insert > Pages in page layout.
If they all loaded when you opened a template, you'd have to go through & delete the ones you don't want & duplicate the ones you want more than one of.
FYI: the name of the program is iWork, no 's' & no hyphen

BlueTooth connects via HotSynch, not other means PALM TX

I am at my wit's end here. Really. I'm about to toss my Palm, and I'm hoping someone can help me out.
Here's my setup:
1. PALM T|X - less than a month old.
2. Dell Inspiron 6000 laptop, running Windows XP Home SP2, 2gb of memory, Centrino technology.
3. USB Bluetooth Adapter 2.0
Here's my problem:
1. I can connect, via Bluetooth, to my laptop in order to HotSynch. I did this by following the on-screen instructions on my Palm device.
2. I cannot connect, via Bluetooth, to my laptop in any other fashion, despite following all of the on-screen instructions. So, when I attempt to go on the Network Service, click on the Connect button,my computer says "Bluetooth Connection Successful. Bluetooth device _ is connected to 'HotSych' service on this computer. Com 11."
The service connection progress never moves beyond that on the Palm device. I always get the following error:
Error: PPP timeout (0x1231)
My connection type is PPP
My idle timeout is 3 minutes, but even if I click "Never" it doesn't connect me.
Query DNS is checked
IP Address is automatic is checked.
Is there PLEASE someone who can help me figure this out? I'd greatly appreciate it.
Thank you.
Post relates to: Palm TX

jrgrampa, you just pulled up a very old post. I have no idea what you are asking about!
Without more information, we/I can't help you.
What OS is on your computer?
What version of Palm Desktop do you have installed?
What errors are you getting? Can you post your HotSync log?
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Only 'oracle' account can connect via sqlplus

Currently, only the linux oracle account can connect to the
server via sqlplus. A have put an exact copy of oracle's
.profile script into other accounts home directories, and those
accounts belong to the linux dba group. When another account
starts sqlplus, they are prompted with login and password, and
the the following error occurs:
ORA-01034 ORACLE NOT AVAILABLE
But if I login as 'oracle', i can connect no problem. I always
start the server under the oracle account with the dbstart
script.
I am probably overlooking something stupid, any ideas?
Please email me directly in addition to the post.
Thanks,
Randon Ethan Loeb
[email protected]
null

There is nothing to do with your .profile, default password, etc.
After Oracle installation via the installer (orainst), have you
run root.sh? Root.sh will set the setuid/setgid bit on for the
file $ORACLE_HOME/bin/oracle. If it is not set, only the owner
(i.e. oracle/dba) can connect.
Fix the problem by rerun root.sh. If it doesn't help, simply run
the commands:
$ chown oracle:dba $ORACLE_HOME/bin/oracle
$ chmod ug+s $ORACLE_HOME/bin/oracle
Kevin (guest) wrote:
: Not sure if this makes a difference, but I use bash (many
: distributions default shell, especially redhat) and I believe
the
: user's profile for that shell is .bash_profile. Also, try sys
as
: your default password for the production release, for some
: strange reason, that's what my default password was.
: Kevin
: Ronald Jeninga (guest) wrote:
: : Hi,
: : did you verify the success of the dbstart-script? i.e. are
all
: : ORACLE processes running?
: : % ps ax | grep oracle
: : ... some output ...
: : What happens if you start ORACLE manually?
: : % svrmgrl
: : > connect internal
: : > startup
: : ... some output ...
: : > quit
: : do you provide the correct user/password combination?
: : % sqlplus scott/tiger # might be different on your system
: : # if you instaled the db together with
: : # the rest, scott/tiger probably
exists
: : if you connect as ORACLE, can you use your DB?
: : % svrmgrl
: : > connect internal
: : > select * from dual;
: : ... some output ...
: : these are my first thoughts, might be valuable might be not.
: : Ronald
: : Randon Ethan Loeb (guest) wrote:
: : : Currently, only the linux oracle account can connect to the
: : : server via sqlplus. A have put an exact copy of oracle's
: : : .profile script into other accounts home directories, and
: those
: : : accounts belong to the linux dba group. When another
account
: : : starts sqlplus, they are prompted with login and password,
: and
: : : the the following error occurs:
: : : ORA-01034 ORACLE NOT AVAILABLE
: : : But if I login as 'oracle', i can connect no problem. I
: always
: : : start the server under the oracle account with the dbstart
: : : script.
: : : I am probably overlooking something stupid, any ideas?
: : : Please email me directly in addition to the post.
: : : Thanks,
: : : Randon Ethan Loeb
: : : [email protected]
null

Can connect via VPN, but can't access AFP server on same Xserve

Hi:
I've set up our XServe with MacOS X Server 10.5.2 to do AFP and VPN (L2TP only; PPTP is disabled). The XServe is a standalone server, not connected to any other direstory server.
I can connect to the XServe's AFP server from my Mac over our wired and wireless network. The AFP server shows up in the sidebar of Finder windows. So far, so good.
I am able to successfully connect to our network via the VPN with Mac OS X 10.5.2 client (on two different machines) using L2TP through our network's firewall (on a Netopia T1 router; UDF ports 500 and 4500 and IP Protocol 50 and 51 are open) using a shared secret.
But I cannot connect to the XServe itself to use Server Admin or AFP (using afp://server.company.com or afp://xxx.xxx.xxx.xxx via the Go > Connect to Server command).
The error I get while connecting to the 10.5.2 AFP server is Some data in apf://server.mycompany.com could not be read or written (Error Code -36 ). I saw this error associated with a SMB problem in 10.4.x, but SMB is not running.
Other iChat users in my office also do not automatically show up in the Bonjour list when I connect to the network. Other computers on our network do not appear in the sidebar of a Finder window. (I'm told these are to be expected, as Bonjour isn't supported (in the "local area Bonjour" over a WAN link - it's purely a multicast feature on the network in the office, and won't be routed across the VPN link. True?)
Now, here's the odd part. There is a second server (v10.4.11) on our network running AFP. I can connect to it (using afp://server.company.com via the Go > Connect to Server command) and mount its various sharepoints via the VPN.
The only thing I see in the VPN log that seems amiss is this (but I have no idea what it means):
Tue Mar 11 23:09:27 2008 : Unsupported protocol 0x8057 received
--Both the 10.5.2 and the 10.4.11 servers have DNS properly configured (though our ISP; we're not running our own DNS).
--Both servers and the client have public IP addresses and have the same subnet mask. Network Utility confirms this while connected to the VPN.
--NAT is not running. The ISP is responding with public IPs for the servers.
--The firewall for the 10.5.2 server is not running (but will be once I get this all working).
--The IP address range for the VPN server doesn't overlap our DHCP pool (which also currently uses public IP addresses).
--Any user can access any service.
--No network routing definitions have been set up.
--In essence, I've followed the steps on Pages 141-142 of the Network Services Admin Guide.
One other note: After I connect, the Network Preferences > VPN > Advanced > TCP/IP window shows the IP address for the client just fine (assigned from the VPN pool), but lists the router as having the IP address of the XServe (rather than the router on the network). Is that normal?
I'm hoping I don't need to have the XServe run DNS as an internal LAN DNS server.... And I'm not sure why I would have to if I can already successfully connect to the 10.4.11 AFP server .
What simple step am I missing?
TIA,
mm

"I am able to successfully connect to our network via the VPN with Mac OS X 10.5.2 client (on two different machines) using L2TP through our network's firewall (on a Netopia T1 router; UDF ports 500 and 4500 and IP Protocol 50 and 51 are open) using a shared secret."
I suspect you mean UDP ports and you might need UDP port 1701 open too.
You only need IP protocol 50 (ESP), protocol 51 (AH) isn't used. And ESP is only used when client and server isn't behind NAT (when NAT is used only the UDP ports are used).
"Unsupported protocol 0x8057 received"
This is usually seen when you can't get GRE through but since you don't use PPTP I can't be sure why this is registered in the logs. Sometimes when connecting using PPTP you have to disconnect and then reconnect for everything to work - you might try this for L2TP too.
But if you already can reach services on any LAN nodes through the VPN I wouldn't bother with it.
As you have a firewall in front of the server you need a second alias IP on the server that you can use to get at the services running on the server through the VPN. The firewall blocks all ports protocols not opened - that's why you can't use the server main IP even if the VPN is up.
The netmask is used by all nodes to determine how big your subnet is: what part of the IP number is the network number and what range the node number is in => really: should traffic be directed to a node on the same LAN or sent directly to the gw/router for forwarding.
What you can't do is connect from a NATed network to another NATed network that both are using the same network number. (That's why people should stay away from using the "default" 192.168.0.0/24 and 192.168.1.0/24 networks for VPN server LANs).
Try your settings at http://www.jodies.de/ipcalc to see what I mean.
"...lists the router as having the IP address of the XServe (rather than the router on the network). Is that normal?"
Yes. The VPN server is the VPN gw/router.
"The firewall for the 10.5.2 server is not running (but will be once I get this all working)."
If you already have a firewall in front of your servers that is a bit redundant.
"--No network routing definitions have been set up."
"I'm hoping I don't need to have the XServe run DNS as an internal LAN DNS server"
You need routing definitions if you want to setup a split tunnel VPN or all traffic is routed through the VPN when connected. The VPN becomes the default gw.
Without ipforwarding ON in the server you can only reach nodes on the server LAN - not Internet.
DNS is needed for your servers forward and reverse names/IPs for advanced services but doesn't need to run in any of your own servers.
If you decide to do a split tunnel VPN config (adding public and private routing definitions) a reachable DNS IP for VPN clients (in VPN config on server) is needed for VPN clients or they can't use names to find anything. To reach this DNS IP if public/not on your server LAN, you need your server to forward IP DNS lookups and have a routing definition for it.
A split tunnel VPN only send traffic for your server LAN through the VPN and all other traffic directly to the local gw/router (Internet).

MacBook Pro can connect via Airport but not iPhone or iBook G4.

Anyone have any ideas? My Macbook Pro can connect to my Airport (v.7.3.1, 802.11n) but not my iPhone or iBook or a Windows Computer or WiFi Blackberry.
The connection is strong and detectable by the ibook but "unable to connect".
Somethings up with the settings but not sure what.
Any ideas?
HELP!
thanks
--K

I've tried Channel 1,2,3,4,5 (still need to try the others)
Secured or unsecured the only wireless connection that works is my MacBookPro.
I get the message "unable to join network..." The connection is very strong.

VPN clients can connect via SSTP but not IKEv2 due to error 808

I have a Windows Server 2012 R2 with RRAS configured to allow SSTP / IKEv2 VPN connections. I'm using an external certificate for server authentication and the client authentication is done via domain username/password (Protected EAP). The clients can
connect successfully when using SSTP, but if IKEv2 is selected, then the following error is displayed:
Error 808:
The network connection between your computer and the VPN server could not be established because the remote server refused the connection. This is typically caused by a mismatch between the server's configuration and your connection settings. Please
contact the remote server's Administrator to verify the server configuration and your connection settings.
My external certificate has the Server Authentication EKU but not the IP security IKE intermediate, however it's the only
certificate installed, so I believe the certificate is OK.
Any ideas on what is causing the error?
Thank you.
Ricardo Costa

Hi,
What NAT device you are using? You must configure the IKEv2 related protocol on your NAT device too. For example if you are using the Cisco® NAT device you must
enable the IKEv2 support on the outside interface:
Enabling IKE on the Outside Interface
You must enable IKE on the interface that terminates the VPN tunnel. Typically this is the outside, or public interface. To enable IKEv1 or
IKEv2, use the crypto ikev1 | ikev2 enable command from global configuration mode:
=================================================
crypto ikev1 | ikev2 enable interface-name
For example:
hostname(config)# crypto ikev1 enable outside
=================================================
The related third party information:
Configuring IPSec and ISAKMP
http://www.cisco.com/c/en/us/td/docs/security/asa/asa84/configuration/guide/asa_84_cli_config/vpn_ike.html#wp1042302
You can refer the following KB to enable the RRAS logging.
RRAS: Logging should be enabled on the RRAS server
http://technet.microsoft.com/zh-cn/library/ee922651(v=ws.10).aspx
Hope this helps.
*** This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does
not control these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers
in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet. ***
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

VCN only while connected via internet address?

I have scoured all the posts here, and searched every phrase I could think of, and read the manual to find the information I am seeking, but I cannot seem to find an answer. I have found similar posts/complaints but no solutions.
I have ARD 3 on my MacBook Pro, and I use it from my office to assist my wife, who works at home, and my mother, who lives in Canada.
My wife's PowerBook is correctly configured in the System Preferences > Sharing > Services pane. She is on a fixed 10.x.x.x IP address behind and Apple Airport Extreme, with ports 8283 and 5900 forwarded correctly to her machine.
My mother has a cable modem (COGECO cable, Canada), fixed IP address, an NO router.
In both cases, firewalls are disabled on their machines.
In ARD, I can see both machines by their DNS names in the list. Status says "offline", but if I open either of them, I see their screens and am able to rudimentarily control both machines. What I cannot do is any of the other Management tasks, like System Reports, client Upgrades, etc.
Is there something inherent in ARD 3 that forces machines connected over the Internt (vs. LAN) to only be controllable in VNC mode? Or am I missing something here?
One question: in the client computers, should the System Preferences > Sharing > Services > ARD > VNC viewers may control screen with password, be checked or unchecked, and does it matter if I am logging into the machines via an admin account I created on both?
Thanks in advance for any useful tips!

Kevin,
it appears to me ... though I am a *total amateur* and only know what I've gleaned from these boards and the net in order to setup ARD for myself ... that for those using Airport networks (lots of us) it is necessary to manually open ports 3283, 5900 in the Sharing preferences under Firewall. If not, the traffic doesn't pass ... even on a LAN. So, you need to add a New configuration in the Firewall tab. (IOW it is NOT enough to simply select ARD in the "Services" tab).
This appears to me to be the problem with VNC over the net ... although I'm not sure that it's a problem really.
I have ARD 3 internet connections working on 3 locations. All of them behind Airport networks. When connected, "VNC On" appears under the "Current Status" tab in ARD 3.
I'm not sure if I'm connecting via VNC or not. I say this because, VNC has only been initiated remotely via "Change Client Settings" in the Manage Menu. It has NOT been set in the Sharing preferences on the client Mac. So ... is it ON or not??
Or ... am I getting a VNC connection because port 5900 is available and necessary due to it having been opened to accomodate the Airport network ? IOW ... is ARD 3 simply taking the route of least resistance ?
My own questions at this point are ...
1/ Does it matter ?
2/ Is VNC, in my case, less secure than a 'direct' ARD connection?
3/ Is VNC faster or slower than a 'direct' ARD commection?
4/ Are there things that I CANNOT do with VNC that I can do with a 'direct' ARD connection?
5/ Would Ports 22 and 5988 help? (I've seen these mentioned in archived threads).
Grant
(P.S. ... many thanks to those who contribute on this board. I know how frustrating it is trying to communicate this sort of thing to the uninitiated).
AluBook 17

Can connect via ODBC but not via SQL Developer?

Hi, all.
My setup:
Windows XP Pro
JDK 1.6
SQL Developer 2.1.1.64.45
I'm attempting to connect to an Oracle DB using OS authentication and trying hand-entry of the host and SID; and also trying my TNS file. When I attempt to connect via SQL Developer, I get the following error:
"Status : Failure -Test failed: ORA-01017: invalid username/password; logon denied."
When I attempt this same connection, however, using ODBC and Access, I can get right in and see the tables.
What can I try in order to get SQL Developer working correctly?
Thanks,
IVR Avenger

I'm not really familiar with connections Using OS authentication, but if OCI+TNS based connections work you could try to activate OCI connections by selecting
Preferences -> Database -> Advanced -> Use OCI/Thick Driverand then use the TNS connection type when creating your connection.
It should work well even with the thin driver but i cannot help you in this case because i've never had to use this kind of authentication.

Rtmp vs. rtmpt - FMLE 3 only can connect via rtmpt not rtmp

Similar Messages

Maybe you are looking for