RTMT Alert Detail

Hi,
Is there any way to get more detail from the alerts generated by RTMT. I would like to know what gateway went down but we cannot tell from the messages that are sent from the system.Here is an example of what is recieved when we lose a PRI gateway:
Thanks!
Chris

Hi,
From the problem description I read that you are trying to figure out which device is
having this registration and unregistration attempts. Now assuming that you are looking at
these message from Alert central, could you please also review the Application logs under
System > Tools > System Viewer for related details?
--The RTMT alerts  severity must be set to Error, so in UCM can you
modified it to be "Informational"
You should  able to find more details next time they
get a device unregistration message.
Remember that check on all servers
the registration and unregistration events are always displayed under the
UCM server to which the gateway is registered.

Similar Messages

  • RTMT ALERTS FOR CCM

    Getting the following alert in the call manager in the RTMT for low water mark exceeded, my experience tells setting the log alert value to a lower level helps on the issue , but not sure. Can somebody guide on this.
    ===============================================================================================
    12/21/2011 7:30 PM : UC_RTMT-2-RTMT_ALERT  2138: Dec 22 2011 00:30:17.348 UTC :  %UC_RTMT-2-RTMT_ALERT: %[Name=LogPartitionLowWaterMarkExceeded][Detail=
    UsedDiskSpace : 62
    MessageString : Common Disk utilization hits LWM!
    AppID : Cisco Log Partition Monitoring Tool ClusterID :
    NodeID : NY1PUB01
    TimeStamp : Wed Dec 21 19:29:52 EST 2011.
    The alarm is generated on Wed Dec 21 19:29:52 EST 2011.][App ID=Cisco AMC Service][Cluster ID=][Node ID=NY1PUB01]: RTMT Alert
    =======================================================================================================
    ccm 6.1.3

    Abhishek,
    Looks like the lower threshold for UsedDiskSpace is set at around 60% & that's why the alert has raised. Keeping it at 75-80% is also fine. All it means is whenever 75-80 % of disk space is full, give an alert. I feel alert at 60% is too low or can be ignored.
    Pls remember to rate helpful posts.
    GP.

  • RTMT Alert

    Hi All,
    I have query related to RTMT alert. is it possible to edit/add more information about the alert?
    For Example, recently I got the below alert which has no necessary information like which router/gateway port number cluster details etc.. Its just a blind message.
    MGCP DChannel is out-of-service. Current total of 1 MGCP gateway device(s) with D-Channel-Out-Of-Service status. The alert is generated on Thu May 19 11:10:29 EDT 2011 on cluster StandAloneCluster.
    Do we have any option to enable/edit the more information for RTMT alert in CUCM?
    Thanks in advance !!!!

    Hi,
    I think you have to go into RTMT and click on alert details here to view the actual name of the device.
    Only other quick way to handle this is SNMP traps from the actual router and into email..
    Cheers,
    Tim

  • Reporting Agent - Alert Views & Alert Details repeating twice

    Hi All,
    I have configured reporting agent settings for a BW Query. The exceptions will be communicated through email. The email has been configured to output Alert Views & Alert Details. However when we recieve the email, the alert views, details as well as the URL is repeating twice. Is there a way to correct this issue. Also URL sometimes is not full, it truncates for some reason. Please advise.
    Thanks a ton.

    Hi,
    Reporting agent is available and can be used in BI 7.0 with running reporting_agent transaction but SAP recommends to use information broadcasting instead reporting agent.
    Note that you can only use the Reporting Agent if you are working with queries and Web templates in the SAP BW 3.x format.As of SAP NetWeaver 7.0, the Reporting Agent functions are covered by Information Broadcasting.
    Regards.

  • [RTMT-ALERT] CallProcessingNodeCpuPegging

    We are receiving an RTMT alert for one of the node in the cluster.
    Error is [RTMT-ALERT] CallProcessingNodeCpuPegging.
    Processor load over 90 Percent.
    Aupair (98 percent) uses most of the CPU.
    Please suggest what to do for the resolution of this and also want to know what is this AUPAIR and why is it running on CCM server.
    Its urgent.

    Hi Sam,
    If the CPU pegging alert is reported at some specific time of the day then it is most likely due to some scheduled activity like DRS Backup, CDR Load etc. Please check the following link
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00808ef0f4.shtml
    CPU Pegging Alerts
    CPUPegging/CallProcessNodeCPUPegging alerts monitor CPU usage based on       configured thresholds:
    Note: %CPU is calculated as %system + %user + %nice + %iowait + %softirq +           %irq
    Alert messages include these:
    %system, %user, %nice, %iowait, %softirq, and %irq
    The process that uses the most CPU
    The processes that wait on Uninterruptible disk           sleep
    CPU Pegging alerts can come up in RTMT due to higher CPU usage than       what is defined as the watermark level. Since CDR is a CPU intensive       application when it loads, check if you receive the alerts in the same period       as when the CDR is configured to run reports. In this case, you can need to       increase the threshold values on RTMT. Refer to       Alerts for more information about RTMT alerts.
    HTH
    Manish

  • RTMT alert CoreDumpFileFound

    Hi all,
    need some help in understanding the following RTMT alert that came in last night:
    At Sat Jan 24 01:29:52 PST 2015 on node , the following CoreDumpFileFound events generated: 
    TotalCoresFound : 1
    CoreDetails : The following lists up to 6 cores dumped by corresponding applications.
    Core1 : Unknown (core.17118.11.cimlistener.1422095365)
    AppID : Cisco Log Partition Monitoring Tool
    ClusterID : 
    NodeID : IPTSUB01
     TimeStamp : Sat Jan 24 01:29:28 PST 2015
    Is this a self-rectifying event?
    Would a therapeutic reboot be warranted?
    Thank you very much for your help.

    Hi Carlo,
    Thank you very much for your feedback..  I followed your suggested approach and it looks like the scenario matches Matthews':  Example 3: Core Stack Corruption ... (please see backtrace below)
      ====================================
     backtrace
     ===================================
     #0  0x004dabae in ?? ()
    #1  0xb542ee80 in ?? ()
    #2  0x00000001 in ?? ()
    #3  0x00000002 in ?? ()
    #4  0x00000000 in ?? ()
    per Matthew's article ...the next steps...  "It is recommended that the corresponding service log (e.g. ccm traces, tomcat logs) and the complete core file be retrieved from the affected system for TAC review."  Could you suggest which ccm traces (and for what period of time) will be needed? also, need a little clarification on the tomcat logs (how-to pull)... lastly, could you provide the best method to copy the core dump file for tac or will the syntax of the utils core analyze <coredump filename> be sufficient?
    Thank you!

  • RTMT ALERT ERROR CiscoDRFFailure

    From the past few days Im getting this RTMT alert constantly,
    Reason : DRF was unable to backup component PHX_CONFIG.Error : Unknown Database Error AppID : Cisco DRF Master ClusterID : 
    Any ideas what this error might be ?

    Hi Kamalakar,
    Looks to be the following
    https://tools.cisco.com/bugsearch/bug/CSCur24834/?reffering_site=dumpcr
    Symptom:
    UCCX backup fails on CUIC component for second node (phx_config)
    Conditions:
    UCCX 10.5 SU1 HA
    Workaround:
    1. Enable Root access on both first node and the second node
    2. Copy the /opt/cisco/desktop/openfire/passphrase from Primary Node to the same location on Secondary Node.
    3. Restart the Unified CCX Notification Service and the Cisco Finesse Tomcat service.
    4. Redo the Back up. It should work this time.
    HTH
    Manish

  • RTMT alert for PRI

    Is there any way to generate an RTMT alert as soon  as the PRI goes down in cisco voice gateway (MGCP). I have almost 20 gateways and all have multiple T1 circuits  and need to setup on all.

    Thanks Yosh, I have Alerts setup for "Number of Registered Gateways Decreased" but my management wants to have Alert specific for all PRI's.
    I wonder if I setup alert for D-Channel "DatalinkService" does it sent alert for the status of individual PRI "Down/up

  • [RTMT-ALERT] DirectoryConnectionFailed - CM 4.1(3)SR8

    hi
    continually getting alert after configuring RTMT relating to Directory Connection even though everything appears ok.
    [RTMT-ALERT] DirectoryConnectionFailed
    Directory connection failed .
    Monitored precanned object has value of 0.
    my callmanager cluster is integrated into our active directory so not using DC directory and i am wondering if this
    alert relates only to DC directory??
    If it does i will disable it, however, if it also monitors the connection to active directory then i want to leave it enabled.
    Everything looks ok on the callmanagers.
    Cheers,
    G

    it should be fixed on your version but since you mention it's all good
    K07469952
    In the Cisco CallManager 4.1(3), the RTMT generates directory replication and connection alarms even when the directory replication appears to function normally
    http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K07469952
    HTH
    java
    if this helps, please rate

  • RTMT alerts for UCM and UCCX:

    We have had issues with UCCX agents that were unable to login because the CTI service or Tomcat service is hung.  We usually have to restart either CTI or Tomcat on the publisher to correct.   Does anyone know of any RTMT alerts that can be setup to notify us that one of those services is not responding or hung? 

    Hi Hariharan,
    In addition to Atul's link please refer the below mentioned link CPU and Memory usage
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/managed_services/cucm_health.html#wp1101115
    Tx,
    Hope this helps
    Shalu

  • BPMON Alerts Detail Info - how to switch to use TRUSTED RFC ?

    Hello Experts,
    we have configured BPMON for our customer and it works fine, alerts are flowing in.
    Now the users start using it and they complain about having a logon prompt popup every time the hit "Detail info" button to jump into satellite system to see alert details. It's very annoying when they need to check many alerts simultaneously.
    So I investigated and found that the function is using LOGIN type RFC for the logon and it seems that SAP designed it to work this way, as SAP's own DEMO shows same thing.
    Question: Is there a legitimate way to make BPMON function use TRUSTED RFC to show alert details instead of LOGIN RFC ?
    By "legitimate" I mean, I know the LOGIN RFC can be "adjusted" to behave like TRUSTED, but that is not "legal" fix especially in production.
    Appreciate any comments.
    Thanks
    Elena

    Hi Elena
    I assume you are using Login RFC in SolMan setup.
    If you switch current RFC to Trusted RFC, if the user has Trusted RFC profile and same user exist in both system, user can use trusted connection.
    Please go to transaction SolMan setup, and side bar menu managed system configuration and open managed config screen to target system. In the 3 rd step of the wizard, there is a place to configure RFC.
    In case if BPMon, Read RFC is used for data collection(as of SAP TMW is used instead of READ).
    And then there are 3 RFC TMW, Trusted and last one(RFC for Solution manager).
    When you press the detail info button, last RFC is used. To this RFC type, you can assign RFC Login( this will ask login screen by default) or Trused RFC.  I think you assin RFC login right now. That's why you have popup.
    If you switch this to Trused one, Trused RFC is used.
    Best Regards
    Keiji

  • BPMON Alerts "Detail info" disappeared in SP10-11

    Hi BPMON Experts,
    we have upgraded SOLMAN from SP08 to SP11 (skipping SP10).
    We have already had BPMON and Analytics setup in SP08.
    Now finding out that in SP11the "Detail Info" and SP13 buttons in Alert Inbox completely disappeared.
    Reading TECHED mats from last year, it sais that BPMON alert details are not integrated in SP10.
    However SAP recommends for users with old BPMON settings to still use OLD  BPO workcenter to realize full functionality..
    But without detail info button - there is not much use for it.
    Is anyone else experiencing same problem ?
    Appreciate your comments.
    Thanks
    Elena

    Hi Elena
    I wonder whether you use MAI based BPMon (BPMon on new monitoring infrastructure) or use classic one...  If the BPMon and BP Analytics setting were made when SP was SP8, I assume it is Classic one.
    Anyway, let me clarify some points.
    As you know from Teched replay, as of Solution Manager 7.1 SP10, BPMon offer new BPMon that based on monitoring alert infrastructure (MAI).  But this does not means, after the SP10, your existing BPMon or BP Analytics setting runs on new MAI infra. Without switching on the MAI, your solution still run on Old infrastructure (I will use classic BPMon engine here).
    Since all the BPMon cases are not covered yet in SP10/SP11 and also conversion tool from classic BPMon to MAI BPMon is not available in SP10/SP11, using Classic BPMon is still recommended.
    So if you simply update SolMan SP from SP8 to 11, your BPMon and  BP Analytics Monitors still run classic BPMon infra. Here basically everything should be same.
    So I bit suprise you have some issue (detail info is not available, ST13<?> button is nto avaialble)...
    In my understanding, there should not be the issue if you still run classic BPMon infra.
    So if this is the case, I recommend you to check your monitor setting. If you update ST-A/PI in managed system during SP11 upgrade, I recommend you to conduct following to get latest repository.
    1. Go to BPMon setup and chose your logical component area. And conduct load monitor definition.
        By pressing this, latest monitor definition is loaded from managed system to SolMan.
    2.To refrect the latest repository content, go to logical componet and choose all monitor and de-activate ->Generate->Activate existing monitors.
    For ST13 button, I recommend you to check your monitor setting (analysis tool tab). If not T-CD/Program assigned to your monitor, the button is not avaialble in alert inbox. So you need to assign the T-CD /Program that you want to see in alert inbx in analysis tool tab of your monitor.
    If your case, is not based on classic BPMon (You newly create solution and switch on MAI setting to your Solution as attached picture), I recommend you to chck new Alert Inbox and open detail info.
    As of SP10, you can control classic / MAI BPMon per solution (but if there is existing monitor, you cannot switch. So you need conversion tool that is planned SP12 probably).
    In MAI based BPMon, there is BPO workcenter. And it offer a bit different alert inbox.
    In new MAI based Alert inbox, to use detail info button, you need to press show detail button.
    (like technical monitoring, new alert inbox support grouping etc.. so to see detail info, you need to go into 1 more detail level).
    In detail display, detail info should be still avaialble like attached picture (but now it is http based. not GUI base).
    So even the new BPMon, detail info still should be avaialble. Also you should be able to call transaction/program like you could do before. (actually in new infra, it can do more).
    I think in the teched replay, it might says "BPMon BW Alert report is not supported yet" in new BPMon....
    Hope above info help you.

  • Alert Details

    Hi,
    Anybody can share complete alerts details docs. in BEx Reporting?
    Regards,
    Vivek.V

    hi
    check these links,
    http://help.sap.com/saphelp_nw04/helpdata/en/e6/63ee7f486cc143a560799d8803ce29/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/1a/615f64816311d38b170000e8284689/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/cc/29483983ea6106e10000000a11402f/content.htm
    Regards,
    Manoseelan

  • RTMT Alert - SDLLinkOutOfService

    We currently have 1-Publisher and 4-Subscribers.  We were told by TAC to turn Call Manager Services off of the Publisher and are now receiving SDLLinkOutOfService alerts on RTMT.  We are trying to determine if we should just disable the alarm on the Publisher in RTMT or if there is a reason to leave this on and determine what could be causing the alarm.
    Thanks,
    Jeff                  

    Here's a copy of the alarm.  Thanks!
    [RTMT-ALERT-StandAloneCluster] SDLLinkOutOfService
    [email protected] [[email protected]]
    Sent:
    Monday, February 10, 2014 10:42 PM
    To:
    Jeff Mize; Julie L. Putman; Robert W. Durham; Greg Knight
    Attachments:
    local  CCM has lost communication with remote CCM on v8.6(2a)SU3
    Current outstanding SDLLinkOOS events:
    LocalNodeId : 1
    LocalApplicationID : 100
    RemoteIPAddress : 10.250.10.11
    RemoteNodeID : 2
    RemoteApplicationID : 100
    LinkID : 1:100:2:100
    AppID : Cisco CallManager
    ClusterID : StandAloneCluster
    NodeID : CMP1
    TimeStamp : Mon Feb 10 22:41:54 CST 2014 
    The alert is generated on Mon Feb 10 22:42:22 CST 2014 on node 10.250.10.10.

  • [RTMT-ALERT-StandAloneCluster] CiscoDRFFailure

    Hi All,
    I am getting alert from my unity connections servers for DRF component. Yesterday I got the alert for pub node and today I got for the sub node around the same time. I have verified the backup status and everything seems to be fine. I am attaching the traces here, Could you tell me whats going on in my network.
    Subject: [RTMT-ALERT-StandAloneCluster] CiscoDRFFailure
    Reason : Unable to access SFTP server or SFTP server too slow to respond.
    AppID : Cisco DRF Master
    ClusterID : 
    NodeID : eccun005-sub
     TimeStamp : Tue Apr 08 21:01:00 GMT+00:00 2014.
    The alarm is generated on Tue Apr 08 21:01:00 GMT+00:00 2014
    Thanks,
    Lajith P

    The alert I got it for today and I could see the line in traces as
    2014-04-08 21:01:00,257 DEBUG [NetMessageDispatch] - drfAlarm:sendAlarm: Sending Alarm: DRFSftpFailure

Maybe you are looking for

  • After iOS 8 Upgrade Icon on Settings still there...

    after the iOS update 8 on my iPad Air, an indicator icon is on the settings. Even a configuration as a new iPad and restoring from the backup has not helped

  • What is it with Verizon lately and their lack of concern for customer satisfaction?

    I am increasingly frustrated with Verizon and their lack of concern for customer satisfaction.  I have been with them since they began and through the years they have become less and less customer friendly.  All I want to do is do an early upgrade to

  • Complete newbie here

    have a clean, wiped hdd....not formatted or partitioned at all... x86 system, dell gx280, p4, 1gig ram... i downloaded the five zip files, extracted the isos and burned a dvd w the five iso's on it. inserted into the dvd rom on the clean system and i

  • Equium M40X and a wireless network

    Hey all, I've just got my new Equium Notebook and when i try to connect to my wireless home network, i can only manage to connect with limited or no connectivity (it can't refresh the ip address either). I'm positive its nothing to do with the networ

  • Error: Reading Credit Master Data in IC

    We are having trouble reading credit master date in the Collection Factsheet tab on the Navigation Bar of the IC. Does anyone have any ideas? Thanks.