RTMT Error :SeverityMatch - Alert sshd(pam_unix)[21789]

CUCM System version: 7.1.3.30000-1.
Please someone could help me for the below query.
I am getting below RTMT Alret,need to know what is the cause and how do i troubleshoot the case.
"The following SyslogSeverityMatchFound events generated: SeverityMatch - Alert sshd(pam_unix)[21789]: check pass; user unknown SeverityMatch - Critical sshd[21798]: fatal: Read from socket failed: Connection reset by peer SeverityMatch - Alert sshd(pam_unix)[21801]: check pass; user unknown SeverityMatch - Critical sshd[21802]: fatal: Read from socket failed: Connection reset by peer SeverityMatch - Critical sshd[21805]: fatal: Read from socket failed: Connection reset by peer"
This message is triggered from 4 nodes: 1 PUB and 3 SUB.
This alerts triggering always at AM timing.
Thanks and Regards,
Velu S

Hi Suresh,
Thanks for your reply on this,
my cluster doesn't have any firewall.
we are not monitoring Cisco IPT Cluster with security devices.
More to add in this.
We have CDR configured and Scheduled backup.is this will be the cause for this.?
What i have observed.
Today i have tried to occur same incident for my confirmation as per the description of the error.i have tried login with wrong user name and wrong password..Got Success in getting the alert again.(so my understaing from this practice some one trying to access the server)
My Query:
Why this was occurred on all the Nodes in the cluster at the same time?
Is there any internal nodes communication issue ?/ Really someone is trying to access ?
Is there any way to check who was trying to login with wrong user name and password?
Please Help.
Regards,
Velu S

Similar Messages

RTMT error Message

Hi,
Does any one know what this RTMT message means.
At Wed Oct 10 09:47:03 EDT 2012 on node UCM2; the following SyslogSeverityMatchFound events generated: SeverityMatch : Alert MatchedEvent : Oct 10 09:46:56 UCM2 auth 1 system-auth(pam_unix)[27774]: check pass; user unknown AppID : Cisco Syslog Agent ClusterID : NodeID : UCM2 TimeStamp : Wed Oct 10 09:46:56 EDT 2012

Hi Curtis
This alert is for security to check who is trying to acces your system.

When I attempt to Extend a PDF document via my LiveCycle server I get the error"Application Alert" The file could not be saved. Are you sure you want to lose your results?

When I attempt to Extend a PDF document via my LiveCycle server I get the error"Application Alert" The file could not be saved. Are you sure you want to lose your results?
I can login fine via this address.
http://[Server Address]:[Port Number]/ReaderExtensions
And I can apply the extension successfully, but when I attempt to download I receive the error above.
Application Alert" The file could not be saved. Are you sure you want to lose your results?

Please check the supported version of flash player on your client machine for LiveCycle : http://bit.ly/1wGD9t4
Upgrade or downgrade it accordingly.
Thanks,
Wasil

Getting error in alert log

HI ,
I am getting error in alert log can anybody help me out to solve this issue.
Thu Dec 01 11:54:49 IST 2011
Errors in file /appl2/oracle2/proddb/10.2.0/admin/PROD_winsome/udump/prod_ora_4717.trc:
ORA-07445: exception encountered: core dump [mutex_lock_impl()+124] [SIGSEGV] [Address not mapped to object] [0x000000005] [] []
ORA-29282: invalid file ID
Thu Dec 01 11:55:03 IST 2011
Errors in file /appl2/oracle2/proddb/10.2.0/admin/PROD_winsome/udump/prod_ora_4600.trc:
ORA-07445: exception encountered: core dump [ksmpgd_init_ctx()+4] [SIGSEGV] [Address not mapped to object] [0xFFFFFFFF7FFDC000] [] []
Thu Dec 01 11:55:03 IST 2011
Errors in file /appl2/oracle2/proddb/10.2.0/admin/PROD_winsome/udump/prod_ora_4697.trc:
ORA-07445: exception encountered: core dump [ksmpgd_init_ctx()+4] [SIGSEGV] [Address not mapped to object] [0xFFFFFFFF7FFDE000] [] []
Thu Dec 01 11:59:07 IST 2011
Errors in file /appl2/oracle2/proddb/10.2.0/admin/PROD_winsome/udump/prod_ora_4990.trc:
ORA-07445: exception encountered: core dump [mutex_lock_impl()+124] [SIGSEGV] [Address not mapped to object] [0x000000005] [] []
Thu Dec 01 12:04:03 IST 2011
Beginning log switch checkpoint up to RBA [0x312e.2.10], SCN: 14839542695
Thu Dec 01 12:04:03 IST 2011
Thread 1 advanced to log sequence 12590 (LGWR switch)
Current log# 9 seq# 12590 mem# 0: /log1/PROD/log09a.dbf
Current log# 9 seq# 12590 mem# 1: /log1/PROD/log09b.dbf
Thu Dec 01 12:05:54 IST 2011
Errors in file /appl2/oracle2/proddb/10.2.0/admin/PROD_winsome/udump/prod_ora_5596.trc:
ORA-07445: exception encountered: core dump [ksmpgd_init_ctx()+4] [SIGSEGV] [Address not mapped to object] [0xFFFFFFFF7FFDF778] [] []
Thu Dec 01 12:05:54 IST 2011
Errors in file /appl2/oracle2/proddb/10.2.0/admin/PROD_winsome/udump/prod_ora_5599.trc:
ORA-07445: exception encountered: core dump [ksmpgd_init_ctx()+4] [SIGSEGV] [Address not mapped to object] [0xFFFFFFFF7FFE0000] [] []
thanks in advanced .it's urgent it's production issue

When did this start happening?
ORA-29282: invalid file IDSee (OERR: ORA-29282 invalid file ID [ID 194780.1]).
Errors in file /appl2/oracle2/proddb/10.2.0/admin/PROD_winsome/udump/prod_ora_5599.trc:
ORA-07445: exception encountered: core dump [ksmpgd_init_ctx()+4] [SIGSEGV] [Address not mapped to object] [0xFFFFFFFF7FFE0000] [] []Search the doc referenced above by Helios, if you could not find any related docs then please log a SR and upload all the trace/alert files to Oracle Support.
Thanks,
Hussein

Enterprise Manager Database Control Errors in Alert.log

Hi all
I'm posting it this forum because i think it is the best place to get some help, i suspect it is something in Entreprise Manager Database Console
sometimes i get errors in Alert.log
Errors in file e:\admin\orapd\udump\orapd_ora_3456.trc:
ORA-25254: time-out in LISTEN while waiting for a message
ORA-06512: at "SYS.DBMS_AQ", line 577
ORA-06512: at "SYSMAN.EMD_NOTIFICATION", line 492
ORA-06512: at line 1
Generally this error is generated when the database is shutdow for backup (3 AM)
In the shutdown script i terminate the DatabaseConsole service before i shutdown the database:
Shutdown Script:
@echo off
REM Script de shutdown base de dados orapd
REM Rui Madaleno , 2004/11/23
echo Shutdown consola de administracao ...
net stop oracledbconsoleorapd
echo Parar o servico OracleCSService ...
net stop oracleCSService
echo Parar o servico OracleOraApacheProcessManager
net stop OracleOraApacheProcessManager
echo Parar o Listener da base de dados
e:\oracle\bin\lsnrctl.exe stop
echo Shutting down database ORAPD ....
e:\oracle\bin\oradim.exe -shutdown -sid orapd -syspwd XXXX -shuttype srvc,inst -shutmode immediate
My environment:
Windows 2003 Server
Compaq Proliant DL580 G2 Server
Oracle Database 10.0.1.0.2
How can i avoid this errors ???
Thanks in Advance
Rui Madaleno

Dear ,
I am facing same problem, detail is
Errors in file d:\oracle\product\10.1.0\admin\oracle\udump\oracle_ora_2952.trc:
ORA-25254: time-out in LISTEN while waiting for a message
ORA-06512: at "SYS.DBMS_AQ", line 577
ORA-06512: at "SYSMAN.EMD_NOTIFICATION", line 492
ORA-06512: at line 1
this problem is happen suddenly and user are not get new connection with database.
thanks in advance

DG Observer triggering SIGSEGV Address not mapped to object errors in alert log

Hi,
I've got a Data Guard configuration using two 11.2.0.3 single instance databases. The configuration has been configured for automatic failover and I have an observer running on a separate box.
This fast-start failover configuration has been in place for about a month and in the last week, numerous SEGSEGV (address not mapped to object) errors are reported in the alert log. This is happening quite frequently (every 4/5 minutes or so).
The corresponding trace files show the process triggering the error coming from the observer.
Has anyone experienced this problem? I'm at my wits end trying to figure out how to fix the configuration to eliminate this error.
I must also note that even though this error is occurring a lot, it doesn't seem to be affecting any of the database functionality.
Help?
Thanks in advance.
Beth

Hi..   The following is the alert log message, the traced file generated, and the current values of the data guard configuration. In addition, as part of my research, I attempted to apply patch 12615660 which did not take care of the issue. I also set the inbound_connection_timeout parameter to 0 and that didn't help either. I'm still researching but any pointer in the right direction is very much appreciated.
Error in Alert Log
Thu Apr 09 10:28:59 2015
Exception [type: SIGSEGV, Address not mapped to object] [ADDR:0x9] [PC:0x85CE503, nstimexp()+71] [flags: 0x0, count: 1]
Errors in file /u01/app/oracle/diag/rdbms/<db_unq_name>/<SID>/trace/<SID>_ora_29902.trc (incident=69298):
ORA-07445: exception encountered: core dump [nstimexp()+71] [SIGSEGV] [ADDR:0x9] [PC:0x85CE503] [Address not mapped to object] []
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Thu Apr 09 10:29:02 2015
Sweep [inc][69298]: completed
Trace file:
Trace file /u01/app/oracle/diag/rdbms/<db_unq_name>/<SID>/trace/<SID>_ora_29902.trc
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning and Oracle Label Security options
ORACLE_HOME = /u01/app/oracle/product/11.2.0.3/dbhome_1
System name:    Linux
Node name:      <host name>
Release:        2.6.32-431.17.1.el6.x86_64
Version:        #1 SMP Wed May 7 14:14:17 CDT 2014
Machine:        x86_64
Instance name: <SID>
Redo thread mounted by this instance: 1
Oracle process number: 19
Unix process pid: 29902, image: oracle@<host name>
*** 2015-04-09 10:28:59.966
*** SESSION ID:(416.127) 2015-04-09 10:28:59.966
*** CLIENT ID:() 2015-04-09 10:28:59.966
*** SERVICE NAME:(<db_unq_name>) 2015-04-09 10:28:59.966
*** MODULE NAME:(dgmgrl@<observer host> (TNS V1-V3)) 2015-04-09 10:28:59.966
*** ACTION NAME:() 2015-04-09 10:28:59.966
Exception [type: SIGSEGV, Address not mapped to object] [ADDR:0x9] [PC:0x85CE503, nstimexp()+71] [flags: 0x0, count: 1]
DDE: Problem Key 'ORA 7445 [nstimexp()+71]' was flood controlled (0x6) (incident: 69298)
ORA-07445: exception encountered: core dump [nstimexp()+71] [SIGSEGV] [ADDR:0x9] [PC:0x85CE503] [Address not mapped to object] []
ssexhd: crashing the process...
Shadow_Core_Dump = PARTIAL
ksdbgcra: writing core file to directory '/u01/app/oracle/diag/rdbms/<db_unq_name>/<SID>/cdump'
Data Guard Configuration
DGMGRL> show configuration verbose;
Configuration - dg_config
Protection Mode: MaxPerformance
Databases:
    dbprim - Primary database
    dbstby - (*) Physical standby database
(*) Fast-Start Failover target
Properties:
    FastStartFailoverThreshold      = '30'
    OperationTimeout                = '30'
    FastStartFailoverLagLimit       = '180'
    CommunicationTimeout            = '180'
    FastStartFailoverAutoReinstate = 'TRUE'
    FastStartFailoverPmyShutdown    = 'TRUE'
    BystandersFollowRoleChange      = 'ALL'
Fast-Start Failover: ENABLED
Threshold:        30 seconds
Target:           dbstby
Observer:         observer_host
Lag Limit:        180 seconds
Shutdown Primary: TRUE
Auto-reinstate:   TRUE
Configuration Status:
SUCCESS
DGMGRL> show database verbose dbprim
Database - dbprim
Role:            PRIMARY
Intended State: TRANSPORT-ON
Instance(s):
    DG_CONFIG
Properties:
    DGConnectIdentifier             = 'dbprim'
    ObserverConnectIdentifier       = ''
    LogXptMode                      = 'ASYNC'
    DelayMins                       = '0'
    Binding                         = 'optional'
    MaxFailure                      = '0'
    MaxConnections                  = '1'
    ReopenSecs                      = '300'
    NetTimeout                      = '30'
    RedoCompression                 = 'DISABLE'
    LogShipping                     = 'ON'
    PreferredApplyInstance          = ''
    ApplyInstanceTimeout            = '0'
    ApplyParallel                   = 'AUTO'
    StandbyFileManagement           = 'MANUAL'
    ArchiveLagTarget                = '0'
    LogArchiveMaxProcesses          = '4'
    LogArchiveMinSucceedDest        = '1'
    DbFileNameConvert               = ''
    LogFileNameConvert              = ''
    FastStartFailoverTarget         = 'dbstby'
    InconsistentProperties          = '(monitor)'
    InconsistentLogXptProps         = '(monitor)'
    SendQEntries                    = '(monitor)'
    LogXptStatus                    = '(monitor)'
    RecvQEntries                    = '(monitor)'
    SidName                         = ‘<sid>’
    StaticConnectIdentifier         = '(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=<db host name>)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=<service_name>)(INSTANCE_NAME=<sid>)(SERVER=DEDICATED)))'
    StandbyArchiveLocation          = 'USE_DB_RECOVERY_FILE_DEST'
    AlternateLocation               = ''
    LogArchiveTrace                 = '0'
    LogArchiveFormat                = '%t_%s_%r.dbf'
    TopWaitEvents                   = '(monitor)'
Database Status:
SUCCESS
DGMGRL> show database verbose dbstby
Database - dbstby
Role:            PHYSICAL STANDBY
Intended State: APPLY-ON
Transport Lag:   0 seconds
Apply Lag:       0 seconds
Real Time Query: ON
Instance(s):
    DG_CONFIG
Properties:
    DGConnectIdentifier             = 'dbstby'
    ObserverConnectIdentifier       = ''
    LogXptMode                      = 'ASYNC'
    DelayMins                       = '0'
    Binding                         = 'optional'
    MaxFailure                      = '0'
    MaxConnections                  = '1'
    ReopenSecs                      = '300'
    NetTimeout                      = '30'
    RedoCompression                 = 'DISABLE'
    LogShipping                     = 'ON'
    PreferredApplyInstance          = ''
    ApplyInstanceTimeout            = '0'
    ApplyParallel                   = 'AUTO'
    StandbyFileManagement           = 'AUTO'
    ArchiveLagTarget                = '0'
    LogArchiveMaxProcesses          = '4'
    LogArchiveMinSucceedDest        = '1'
    DbFileNameConvert               = ''
    LogFileNameConvert              = ''
    FastStartFailoverTarget         = 'dbprim'
    InconsistentProperties          = '(monitor)'
    InconsistentLogXptProps         = '(monitor)'
    SendQEntries                    = '(monitor)'
    LogXptStatus                    = '(monitor)'
    RecvQEntries                    = '(monitor)'
    SidName                         = ‘<sid>’
    StaticConnectIdentifier         = '(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=<db host name>)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=<service_name>)(INSTANCE_NAME=<sid>)(SERVER=DEDICATED)))'
    StandbyArchiveLocation          = 'USE_DB_RECOVERY_FILE_DEST'
    AlternateLocation               = ''
    LogArchiveTrace                 = '0'
    LogArchiveFormat                = '%t_%s_%r.dbf'
    TopWaitEvents                   = '(monitor)'
Database Status:
SUCCESS

RMAN success, but errors in alert.log file

My RMAN backup script runs well, but generates errors in alert.log file.
Here is the trace file contents:
/usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_3990.trc
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
ORACLE_HOME = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server
System name: Linux
Node name: plockton
Release: 2.6.18-128.2.1.el5
Version: #1 SMP Wed Jul 8 11:54:54 EDT 2009
Machine: i686
Instance name: XE
Redo thread mounted by this instance: 1
Oracle process number: 26
Unix process pid: 3990, image: oracle@plockton (TNS V1-V3)
*** 2009-07-23 23:05:01.835
*** ACTION NAME:(0000025 STARTED111) 2009-07-23 23:05:01.823
*** MODULE NAME:(backup full datafile) 2009-07-23 23:05:01.823
*** SERVICE NAME:(SYS$USERS) 2009-07-23 23:05:01.823
*** SESSION ID:(33.154) 2009-07-23 23:05:01.823
*** 2009-07-23 23:05:18.689
*** ACTION NAME:(0000045 STARTED111) 2009-07-23 23:05:18.689
*** MODULE NAME:(backup archivelog) 2009-07-23 23:05:18.689
Does anyone know why? Thanks.
Richard

I'm not sure if this will answer your question or not, but I believe these messages can likely be ignored.
I'm currently running 10.2.0.1.0 Enterprise Edition in pre-production (yes, I know I should apply the latest patchset and I plan to do so as soon as I get a development box allocated to me and can test it's impact). I see the same types of messages that you've reported with each of my regularly-scheduled backups:
a) The alert_<$SID>.log reports that there are errors in trace files:
Mon Aug 10 04:33:49 2009
Starting control autobackup
Mon Aug 10 04:33:50 2009
Errors in file /opt/oracle/admin/blah/udump/blah_ora_32520.trc:
Mon Aug 10 04:33:50 2009
Errors in file /opt/oracle/admin/blah/udump/blah_ora_32520.trc:
Mon Aug 10 04:33:50 2009
Errors in file /opt/oracle/admin/blah/udump/blah_ora_32520.trc:
Control autobackup written to DISK device
handle '/backup/physical/BLAH/RMAN/cf_c-2740124895-20090810-00'
b) The .trc files, when you look at them contain no errors - only these "informational" messages:
*** 2009-08-10 04:33:50.781
*** ACTION NAME:(0000105 STARTED111) 2009-08-10 04:33:50.754
*** MODULE NAME:(backup archivelog) 2009-08-10 04:33:50.754
*** SERVICE NAME:(SYS$USERS) 2009-08-10 04:33:50.754
*** SESSION ID:(126.28030) 2009-08-10 04:33:50.754
c) I've verified that LOG_ARCHIVE_TRACE is set to 0:
SQL*Plus> show parameter log_archive_trace
NAME TYPE VALUE
log_archive_trace integer 0
As best I can discern from my own experience, these should just be ignored and I trust (read: "hope") they will simply go away once the latest patchset is applied. As for you running Oracle XE, a patchset is not an option, unfortunately.
V/R
-Eric

ORA- errors in alert log file

I wanted to know when the ORA- errors are reported into the alert.log file?
And which tye of errors are reported into it?
And if i wanted to log all the ORA-errors in the alert log then is there any setting for that?

You can find the type of errors reported in the link above.
Also, you maynot like to log ORA-00942: table or view does not exist, ORA-00904: : invalid identifier type of errors in alert.log - right? You may want to research at setting up events for generating trace files on specific error numbers you are looking at. That might resolve your problem - hth.

Errors in alert log and listener log and "alter database mount exclusive"

Hello!
I need a help.
Database 11R2 works under MS Windows Server.
Whwn I start it using Services, according alert log it is started by command "alter database mount exclusive".
Next - alter database open.
After this, it seams that program, which should put data into database, can not work with it, because I see errors in alert log: ora-12537, 12560, 12535, 12570, 12547.
What does itmean and what to do?
This is extract from alert_log
ORACLE_BASE from environment = C:\Oracle
Mon Feb 04 14:54:53 2013
alter database mount exclusive
Successful mount of redo thread 1, with mount id 1458539517
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: alter database mount exclusive
alter database open
Thread 1 opened at log sequence 3105
Current log# 3 seq# 3105 mem# 0: C:\ORACLE\ORADATA\xxx\REDO03.LOG
Successful open of redo thread 1
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
SMON: enabling cache recovery
Successfully onlined Undo Tablespace 2.
Verifying file header compatibility for 11g tablespace encryption..
Verifying 11g file header compatibility for tablespace encryption completed
SMON: enabling tx recovery
Database Characterset is AL32UTF8
No Resource Manager plan active
Mon Feb 04 14:55:04 2013
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
Mon Feb 04 14:55:06 2013
QMNC started with pid=20, OS id=2860
Completed: alter database open
Mon Feb 04 14:55:11 2013
Starting background process CJQ0
Mon Feb 04 14:55:11 2013
CJQ0 started with pid=25, OS id=2000
Mon Feb 04 14:55:11 2013
db_recovery_file_dest_size of 4977 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Mon Feb 04 15:00:29 2013
Starting background process SMCO
Mon Feb 04 15:00:29 2013
SMCO started with pid=32, OS id=3212
Edited by: kogotok1 on Feb 4, 2013 4:54 PM

Thank you.
But in the same time - when I see in alert log those error messages ora -12560, 12537,12535,12570 and so on - clients programs, whiie try to connect, hang up.
For sql plus takes 20 minutes to connect.
lsnrctl status gives the following
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 04-FEB-2013 16:01
:46
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=xxx-BD.mosxxx
.elektra.net)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 01-FEB-2013 10:22:48
Uptime 3 days 5 hr. 39 min. 54 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\Oracle\listener.ora
Listener Log File c:\oracle\diag\tnslsnr\xxx-BD\listener\alert\l
og.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xxx-BD.mosxxx.elektra.net)
(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XXX" has 2 instance(s).
Instance "XXX", status UNKNOWN, has 1 handler(s) for this service...
Instance "xxx", status READY, has 1 handler(s) for this service...
Service "XXXDB" has 1 instance(s).
Instance "xxx", status READY, has 1 handler(s) for this service...
The command completed successfully
To tell the truth I am confuse - I thought I have only 1 service "XXXDB" and 1 instance - "xxx".
May be I have wrong entries in tnslsnr.ora?

Errors in alert log PROD

Dear all,
Oracle 10.2 on AIX 5.3
I am getting these errors in my alert log.
ORA-12012: error on auto execute of job 42568
ORA-04063: ORA-04063: package body "EXFSYS.DBMS_RLMGR_DR" has errors
ORA-06508: PL/SQL: could not find program unit being called: "EXFSYS.DBMS_RLMGR_DR"
I first uninstalled the EXFSYS schema and then installed it again. Then I tried to install the Rule Manager. and I get another error
SQL> @ ?/rdbms/admin/catrul.sql
begin
ERROR at line 1:
ORA-20000: XDB component not found. XDB should be installed prior to Rules
Manager installation.
ORA-06512: at line 3
How can I install XDB component. Please help

Maybe due to forum bug, thisthread is duplicate :
Errors in alert log PROD
Nicolas.

WLS 10.3.3 (OSB) Exception faced : General runtime error: FATAL Alert:BAD_CERTIFICATE - A corrupt or unuseable certificate was received.

WLS 10.3.3 not supporting SHA2 cert at provider end . (wild card certificate cannot be imported to trusted certs)
During integration from OSB 11g we face below exception :
General runtime error: FATAL Alert:BAD_CERTIFICATE - A corrupt or unuseable certificate was received
Regards,
Anitha

Enable -Dssl.debug=true java option and capture the logs.
You might find this userful
http://weblogic-wonders.com/weblogic/2010/01/28/troubleshooting-ssl-issues/

Receive an error in alert log after successful porpagated aq message

Hi experts,
I have a problem with the propagation feature of Oracle Advanced Queues!
First of all I use a 10gR1 RAC database.
After creating my queue and schedule I get the following error in alert log but the message will be successful propagated.
After 16 runs the job will be set broken. Ok this is clear but so works DBMS_JOB. But why I get this message below? Is it possible that grants are missing?
Errors in file /u01/app/oracle/admin/rdstest/bdump/rdsts1_j000_385024.trc:
ORA-12012: error on auto execute of job 5523173
ORA-06521: PL/SQL: Error mapping function
ORA-00604: error occurred at recursive SQL level 2
ORA-06521: PL/SQL: Error mapping function
ORA-06512: at "SYS.DBMS_AQADM_SYSCALLS", line 574
ORA-06512: at "SYS.DBMS_PRVTAQIP", line 2054
ORA-06512: at line 1
ORA-25254: time-out in LISTEN while waiting for a message
ORA-06512: at "SYS.DBMS_AQADM_SYSCALLS", line 574
ORA-06512: at "SYS.DBMS_PRVTAQIP", line 2054
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_AQADM_SYS", line 6662
ORA-06512: at "SYS.DBMS_AQADM_SYS", line 6913
ORA-06512: at "SYS.DBMS_AQADM", line 915
ORA-06512: at line 1
Thank you for helping and best regards!!

I found that Babylon had changed the proxy setting. Try going to Tools/Options/Advanced/Network/Settings and select "No proxy".
This has helped but things are still slow and I suspect that some other changes have been made to the Firefox settings.
Installing unauthorised software on your PC should be made illegal. I will avoid Babylon forever so they have done themselves no favours by trying to be smart!

How to check particular error in alert log file

Hi all,
How to check particular error in alert log file,for supose if i get error in batabase yesterday 4 pm & today i want to check alert log file to get basic idea..it might be a big file so how to check that particular error..
Thanks & regards,
Eswar..

What's your oracle version?
If you are in 11g you can use adrci tool
1- set homes diag/rdbms/orawiss/ORAWISS/ : the rdbms home
2- show alert -P "MESSAGE_TEXT LIKE '%ORA-%'" -term : to find all the ORA-% errors in the alert file
3- show alert -P "MESSAGE_TEXT LIKE '%ORA-%' and originating_timestamp > systimestamp-51 " -term : to find all the ORA-% errors in the alert file during the last 51 days,
4- show alert -P "MESSAGE_TEXT LIKE '%ORA-%' and originating_timestamp > systimestamp-1/24 " -term : to find all the ORA-% errors in the alert file during the last hour,
5- show alert -P "MESSAGE_TEXT LIKE '%ORA-12012%' and originating_timestamp > systimestamp-1/24 " -term : to find the particular ORA-12012 error in the alert file during the last hour,
Example:
[oracle@wissem wissem]$ adrci
ADRCI: Release 11.2.0.1.0 - Production on Wed May 4 10:24:54 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
ADR base = "/home/oracle/app/oracle"
adrci> set homes diag/rdbms/orawiss/ORAWISS/
adrci> show alert -P "MESSAGE_TEXT LIKE '%ORA-'" -term
ADR Home = /home/oracle/app/oracle/diag/rdbms/orawiss/ORAWISS:
adrci> show alert -P "MESSAGE_TEXT LIKE '%ORA-%'" -term
ADR Home = /home/oracle/app/oracle/diag/rdbms/orawiss/ORAWISS:
2010-12-11 19:45:41.289000 +01:00
ORA-1109 signalled during: ALTER DATABASE CLOSE NORMAL...
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/home/oracle/app/oracle/oradata/ORAWISS/system01.dbf'
ORA-1547 signalled during: ALTER DATABASE RECOVER database until time '2011-01-21:10:48:00' ...
Errors in file /home/oracle/app/oracle/diag/rdbms/orawiss/ORAWISS/trace/ORAWISS_j000_5692.trc:
ORA-12012: error on auto execute of job 29
ORA-01435: user does not exist
2011-03-15 11:39:37.571000 +01:00
opiodr aborting process unknown ospid (31042) as a result of ORA-609
2011-03-15 12:04:15.111000 +01:00
opiodr aborting process unknown ospid (3509) as a result of ORA-609
adrci>
adrci> show alert -P "MESSAGE_TEXT LIKE '%ORA-%' and originating_timestamp > systimestamp-51 " -term
ADR Home = /home/oracle/app/oracle/diag/rdbms/orawiss/ORAWISS:
2011-03-15 10:19:45.316000 +01:00
Errors in file /home/oracle/app/oracle/diag/rdbms/orawiss/ORAWISS/trace/ORAWISS_j006_5536.trc:
ORA-12012: error on auto execute of job 26
ORA-01435: user does not exist
Errors in file /home/oracle/app/oracle/diag/rdbms/orawiss/ORAWISS/trace/ORAWISS_j000_5692.trc:
ORA-12012: error on auto execute of job 29
ORA-01435: user does not exist
2011-03-15 11:39:37.571000 +01:00
opiodr aborting process unknown ospid (31042) as a result of ORA-609
2011-03-15 12:04:15.111000 +01:00
opiodr aborting process unknown ospid (3509) as a result of ORA-609
adrci>

Error -36 alert displays when connecting to a Windows server

Hi All
I am getting error -36 when I tried to copy any file or folder from windows server
"Error -36 alert displays when connecting to a Windows server"
Even the file info is zero KB, while from other MAC machine it is right size.

You shouldn't get the same error when you are doing it from Terminal. The error should be a little different. I just did a test. Is this a Microsoft 2003 server, 2000 or NT4 you are connecting to? Your post isn't specific. Make sure the System Preferences:Network:Advanced:WINS tab is filled in with the domain you are connecting to next to the "Workgroup" name. The WINS server should already be filled in. Open the connect window with command K. Type domainname\username for the login and then the password. If you don't want to enter the domain each time you will need to add the domain in the Applications:Utilities:Directory Uitility application.
If you are trying to connect to a Windows XP client box, the machine will automatically try to authenticate with the guest account not the username and password you are using even when "registered user" is ticked. You have to edit the registry to change this default. If the username from the Windows PC is the same as the user logon then this is why the PC is able to connect and the mac is not.

Error in Alert Configuration

Hi,
I am getting error in Alert Configuration
*The following error text was processed in the system:
Die URL enthält keine vollständige Domainangabe (eccdcs1s statt eccdcs1s.).
Exception Class CX_FQDN
Error Name
Program CX_FQDN=======================CP
Include CX_FQDN=======================CM002
ABAP Class CX_FQDN
Method CHECK
Line 10
Long text - *
how to solve this error,
Vshabir

Hey
Please make sure that you have added fully qualified domain name under the parameter com.sap.aii.rwb.server.centralmonitoring.r3.ashost in exchange profile.
It wont work if you only have hostname there.
You may need to restart Java engine after the change.
Thanks
Aamir

RTMT Error :SeverityMatch - Alert sshd(pam_unix)[21789]

Similar Messages

Maybe you are looking for