RTMT logs Analysis tool

Dears,
is there any tool to analyse the RTMT logs and IOS logs.
it is hard to go line by line for troubleshooting
thanks in advance
Anas

And there is no other way to do this right than going line by line, tools won't show you every single message as a text editor will, and will often hide the lines that will tell you exactly what is going wrong.
Use tools line notepad++ to highlight and search for specific keywords or process IDs to follow a specific call and review the whole logs.

Similar Messages

  • Log analysis Tool

    Hi,
    I need info regd. log files generated by Weblogic5.1.
    I found 3 log files namely,weblogic.log,jdbc.log,access.log.
    Is there any other log files generated by Weblogic.
    I am using IIS as WebServer (using iisproxy.dll). IIS is also creating one logfile
    under c:\tmp folder.
    Pl. give me info on list of log files created by Weblogic & IIS. Which files are
    good to analysis for getting website statistics.
    I am looking for Log Analysis Tool. Pl. give me list of free/low price tools.
    Thanx
    -Kalyan

    Hi.
    kalyan wrote:
    Hi,
    I need info regd. log files generated by Weblogic5.1.
    I found 3 log files namely,weblogic.log,jdbc.log,access.log.
    Is there any other log files generated by Weblogic.
    No, those are the only 3 log files created by WLS.
    >
    I am using IIS as WebServer (using iisproxy.dll). IIS is also creating one logfile
    under c:\tmp folder.The ISAPI plugin is creating this file because you have the Debug parameter set to ON
    >
    >
    Pl. give me info on list of log files created by Weblogic & IIS. Which files are
    good to analysis for getting website statistics.The best logs for web stats are the access.log file and the wlproxy.log file. You can
    set different logging levels for the wlproxy.log file - read the plugin documentation
    for more info on this.
    >
    >
    I am looking for Log Analysis Tool. Pl. give me list of free/low price tools.We don't recommend specific log analysis tools - although there are several out there,
    and probably more than a few low-cost ones. Perhaps someone else can answer this one.
    Regards,
    Michael
    >
    >
    Thanx
    -Kalyan--
    Developer Relations Engineer
    BEA Support

  • Log Analysis tools with cgi programs (slightlyoff-topic)

    Has anyone used a log analysis tool successfully in conjunction with
    WebEnterprise to track what users are doing?
    We have a WebEnterprise app that does not really have any of that sort of
    tracking built into it, so we're interested in trying to extract as much
    usage information as we can from the web logs. Since there is little use of
    HTTP POST operations, most of the information we would need is in fact
    available in the URL, but we have not yet found the "ideal" tool for doing
    this analysis. We do not want to spend a lot of time with PERL or something
    writing our own tool, but many of the commercial ones seem to have limited
    ability to deal effectively with parsing arguments to CGI programs in the
    URL.
    Any suggestions on products that do this well with any easy-to-user admin
    interface and (preferable) nice-looking HTML reports?
    Sam Yates
    Systems Analyst
    Amgen
    [email protected] <mailto:[email protected]>
    (805) 447-1574
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    Has anyone used a log analysis tool successfully in conjunction with
    WebEnterprise to track what users are doing?
    We have a WebEnterprise app that does not really have any of that sort of
    tracking built into it, so we're interested in trying to extract as much
    usage information as we can from the web logs. Since there is little use of
    HTTP POST operations, most of the information we would need is in fact
    available in the URL, but we have not yet found the "ideal" tool for doing
    this analysis. We do not want to spend a lot of time with PERL or something
    writing our own tool, but many of the commercial ones seem to have limited
    ability to deal effectively with parsing arguments to CGI programs in the
    URL.
    Any suggestions on products that do this well with any easy-to-user admin
    interface and (preferable) nice-looking HTML reports?
    Sam Yates
    Systems Analyst
    Amgen
    [email protected] <mailto:[email protected]>
    (805) 447-1574
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

  • Does Sun ONE Web Proxy Server have built-in log analysis tools? What kind o

    Sun ONE Web Proxy Server automatically logs all requests using either the common log-file format or an extended log-file format. The extended log-file format includes the referrer field and user agent. You can also create your own log file format by selecting which HTTP fields you would like to log. A built-in log analysis program includes reports such as total number of requests, total bytes transfered, most commmon URLs requested, most common IP addresses making requests, performance during peak periods, cache hit rates, and estimated response time reduction. The items logged and the analysis program are completely configurable using the server manager's HTML form.

    Sun Java System Web Server is a web server; it serves web pages to web clients. Sun Java System Web Proxy Server, on the other hand, is a web proxy server; it routes requests/responses between web servers and web clients.
    You can configure Web Server to act as a simple reverse proxy by installing the Web Server 6.1 Reverse Proxy Plugin. This doesn't provide any of the forward proxy or caching proxy functionality found in Web Proxy Server.
    Both Web Server 6.1 and Web Proxy Server 4.0 are supported on Solaris 10.

  • Apache log analysis for portal page visits etc

    We are about to go into production with Oracle Portal (9iAS rel 9.0.2.0.1).
    I have been looking into how to gather statistics on web site usage and have concluded that I cannot get the information from within portal logs since many pages are served from the cache and there is no interaction with the database at all.
    I think I need to, therefore, analyse the apache log files. Can anyone recommend a good 3rd party product for log analysis? I am also concerned that the portal specific urls might severely limit the usefullness of the data I can extract.
    Has anyone used a log analysis tool in conjunction with Portal or knows of a product with a specific add-on for Oracle Portal (I have seen these for other portals and CMS products).
    Any pointers appreciated, I am completely new to this area.
    Peter.

    Peter,
    You might want to look at the "ClickStream Collector" that is included in a 9iAS installation.
    I'm not sure if it will do what you want with Portal, but it's starting point.
    Good luck!
    Bill G...

  • Speedgrade crashes when showing the analysis tools.

    I can make edits and changes to grades and effects just fine. But as soon as I click the arrow to open the analysis tools, the application crashes. This is extremely frustrating as I need the scopes to do anything in SG.
    I have attempted to lower preview resolution, scopes resolution, GPU acceleration on and off. I have uninstalled twice.
    Machine info:
    Windows 7
    amd fx 8350
    32gb ram
    2x GTX 770s SLI
    Footage stored on internal SSD

    Same here.
    I can work all day in SG no problems. As soon as I click the arrow to bring up the scopes *crash*. This is post cleanup SOP.
    AMD 3820 @ 3.5GHz
    16GB RAM (11GB dedicated to Adobe)
    Asus Nvidia GTX760-DC2 2GB
    Win 8.1 (all updates current today)
    Speedgrade 8.2x51 Native access (no hyperlink from PP)
    GPU Acceleration enabled via CUDA
    No plug-ins for SG or PP
    Error log as follows:
    Problem Event Name:
    APPCRASH
      Application Name:
    SpeedGrade.exe
      Application Version:
    8.2.0.0
      Application Timestamp:
    54887476
      Fault Module Name:
    SpeedGrade.exe
      Fault Module Version:
    8.2.0.0
      Fault Module Timestamp:
    54887476
      Exception Code:
    c0000005
      Exception Offset:
    00000000003ee03f
      OS Version:
    6.3.9600.2.0.0.256.48
      Locale ID:
    1033
      Additional Information 1:
    d236
      Additional Information 2:
    d236bbe002996cedee0dde381fa38db4
      Additional Information 3:
    c93f
      Additional Information 4:
    c93ffbb2a38ecaab8d72a49f5c39cc59

  • I found warning after ran Best practice analyser Tools in exchange 2010

    Hello ,
    when ran Best practice Analyse tool i found some warining :
    1-DNS 'Host' Record Appears to Be Missing
    2-Active Server Pages is
    not installed
    3-Application log size
    4-Self –sign certificate found:
    is strongly recommended that you install an authority-signed or trusted certificate
    The SSL certificate for 'https://exchange.mydomain.com/Autodiscover/Autodiscover.xml' is self-signed. It does not provide any of the security guarantees provided
    by authority-signed or trusted certificates.(i have ssl certificate form geo cert Turst )  all users you can access mails form owa and they  can connect
    mailbox using outlook anywhere but with SSL warning.
    5-Single Global catalog in topology:
    There is only one global catalog server in the Directory Service Access (DSAccess) topology on server CADEXCHANGE. This configuration should be avoided for fault-tolerance
    reasons
    already checked the below links but i am not understood good  :
    http://technet.microsoft.com/en-us/library/6ec1c7f7-f878-43ae-bc52-6fea410742ae.aspx
    http://technet.microsoft.com/en-us/library/4fa708a1-a118-4953-8956-3c50399499f8.aspx
    http://technet.microsoft.com/en-us/library/8867bba7-7f81-42f9-96b6-2feb7e0cea4e.aspx
    please advise me to avoid this issue
    thanks

    i have 2 server both server global catalog
    my question why warning appear only one global catalog
    please explain this.
    when test Autodiscover the test successful but when expand menu
    i am found some error :
    Attempting to test potential Autodiscover URL https://Mydomain.com:443/Autodiscover/Autodiscover.xml
    Testing the SSL certificate to make sure it's valid.
    Validating the certificate name.
    Certificate name validation failed 

  • Cannot install the Microsoft Exchange connectivity analysis tool

    I am troubleshooting our new 2013 Exchange server because Outlook client cannot connect but OWA is working fine. The 2 new 2013 Exchange server as DAG were installed to co-exist with Exchange 2007.
    I am trying to download and install Microsoft Exchange connectivity analysis tool BUT always got an error "Error attempting to install the Microsoft Exchange connectivity analysis tool"  and in the log the error is "URLDownloadToCacheFile
    failed with HRESULT '-2146697208'.
    I am installing it in Windows 8 64b, Please help as we are troubleshooting the new Exchange without any success so far...If there is an full download link, please provide.
    Thanks in advance...

    Hi Teyob,
    Did you try to use different browser to check if the issue persist?
    This issue was occurred on browser. If you IE with this issue, we should check to clear the option "Warn if changing between secure and not secure mode" from your Internet Explorer(IE) Tools--Internet Options--- Advanced--Security.
    If the setup URL of the ClickOnce application being installed is redirected from a non-secure to a secure site (or vice-versa), the installation would fail due to the Internet Explorer warning. Therefore, please make sure to remove the redirection completely
    and point to the actual setup URL.
    If the issue persists, we could perform Windows Update to install updates and then run the Desktop configuration again.
    If there are any questions regarding this issue, please be free to let me know. 
    Best Regard,
    Jim
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Jim Xu
    TechNet Community Support

  • Tax Analysis Tool | Report | SAP B1 | Localisation India

    I don't know why this thread is not displayed same as I have typed in
    Hi Solution Development Team,
    I guess you are aware of the poor status of legal reports offered by SBO in country india version (I am aware of merging of A,B,C in new version 8.8).
    I fore see if a Tax Analysis tool / Report provided same on the line of Sales Analysis already available at present, then it can be of great help to customer in following ways.
    1. In India the frequency of changes in Legal tax structure is veri high, so even if all the as of date reports are developed then it can change any time.
    2. The proposed solution can be suggested as work around to customers/users.
    The desired tool/report should work as below
    1st Input parameter screen should collect following information from user (you may add more)
    1.a. From Tax Category
    1.b. To Tax Category
    1.c. From Tax Type
    1.d. To Tax Type
    1.e. From Tax code
    1.f. To Tax code
    1.2. Tax combination
    1.3. Select From Date (Posting / Document)
    1.4. Select To Date (Posting / Document)
    1.5. Transaction category (Optional reference A/R Invoice Tax Tab)
    1.6. Check Box ( Multiple choice A/R Invoice , A/P Invoice , A/P and A/R Credit Memo etc Marketing documents same as available in General Ledger report)
    1.7. Radio Button (Summary OR Detailed)
    Once user provides above details then in 2nd screen system should provide following data filterd based on criteria given in 1st screen
    01. BP code and Name (Customer/Supplier)
    02. Document Type
    03 .Document No.
    04. Document Date and Posting Date in separate columns
    05. Item (multiple line for same document only in case of Detailed is selected in 1.7 above)
    06. Tax Category (multiple line for same document only in case of Detailed is selected in 1.7 above)
    07. Tax Type (multiple line for same document only in case of Detailed is selected in 1.7 above)
    08. Tax Combination (multiple line for same document only in case of Detailed is selected in 1.7 above)
    09. Tax Code (multiple line for same document only in case of Detailed is selected in 1.7 above)
    10. Base Amount
    11. Tax Percentage (depend upon the Tax code / Formulla)
    12. Total Tax Amount (as per the choice made in 1.7 above - total document tax in case summary is selected)
    13. Document Total as applicable
    14. Transaction Category
    15. BP Tax Info. Columns (VAT No. / Service Tax No. PAN No. etc all)
    Also bring other columns which you find relavant, user should have option to make visible using form setting
    The chalange I guess in this reporting/analysis is to display tax parameter code wise amount in column format which is stored in row format in system per item line (for reference see details displayed in link of A/R invoice Tax amount column).
    Best Regards,
    Samir Gandhi

    No Body responded very strange !!!!!

  • I have adobe photoshop CS6 and I am trying to use the analysis tools but all of them except for the ruler tool are unavailable. Am I missing certain plug ins?

    I have adobe photoshop CS6 and I am trying to use the analysis tools but all of them except for the ruler tool are unavailable. Am I missing certain plug ins?

    Which operating system?
    If I recall, some features were not fully supported on XP.
    Nancy O.

  • ClassLoader Analysis Tool(CAT) doesn't seem to work with WL10.3

    Hi,
    I have an EJB running on WL10.3. It uses the Apache Commons Pool 1.6 jar to maintain a Pool of the other component sessions. We recently came to know that WL10.3 already has commons-pool.1.3 jar in its default classpath (module directory), so 1.6 jar is not being referenced at all. So we added META-INF\weblogic-application.xml and used the following setting as per the ClassLoader Analysis Tool(CAT) suggestion. We updated the deployment with this and cleared the cache,  restarted, but still the CAT Tool's 'Analyze Conflicts' gives the same suggestion, implying that the changes didn't work. So not sure if this is the problem with the CAT Tool or with the following configuration.
    <?xml version="1.0"?>
    <weblogic-application xmlns="http://www.bea.com/ns/weblogic/90"
      xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
           <application-param>
                <param-name>webapp.encoding.default</param-name>
                <param-value>UTF-8</param-value>
           </application-param>
           <prefer-application-packages>
                <package-name>org.apache.commons.*</package-name>
           </prefer-application-packages>
    </weblogic-application>
    Also, Is there any alternative to verify this change, I checked for commons-pool verbose option, so that we could see more details and track the class files. But I don't see any option available. Can anybody help ?
    Thanks.

    Did you build Elsa with this package from AUR: elsa-svn-arch
    The way your elsa.conf looks like indicates to me that you have not.
    Please use the package because you are also missing pam-files.

  • STATSPACK ANALYSIS TOOL

    hi guys,
    I need to analysis my statspack report of my own. Is there any free tool provided to analyse the report of my own.
    TIA,

    Hi,
    You could take a look at a great set of statspack and AWR analysis tools here http://www.statsviewer.netfirms.com/
    Cheers

  • Analysing tools for KM documents

    Hello,
    Does anybody know, if there are any analysing tools available, with which you can analyse the access of the KM documents. They should answer questions like
    - when was the last access to a documents?
    - which documents have an average rating lower than x?
    - how often has the documents been accessed?
    The purpose is, to identify documents, which may be obsolete...
    Regards,
    Dominik

    Hi Dominik,
       There is not tool but you can develop it.
    You can develop a filter, each time that you access a document, this statistic information should be saved in a database and then you can report.
    Here you have an example about how to create a report:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6b30b090-0201-0010-829d-e988d093ac65
    On the other hand,
    Using taxonomies, you can classify document by rating.
    Also in Content Management->Report->Resource Statistics (
    This report calculates statistic information on the content of KM repositories
    ). I know that this report it is not that you are looking for but ....
    Patricio.

  • Problem with 'restrict data' option in Web Analysis' Analysis Tool

    I feel like i'm in the twilight zone.
    We have made a report in web analysis, withh essbase as a source, and works fine.
    We want to restrict data for customers that generate more than 1,000,000 revenue, for example
    So, we go to Analysis tools, restrict data. The dialog window opens
    We hit 'Select Column...' and nothing happens. No Column is shown, thus being unable to complete the dialog.
    Should we enable something in essbase to allow this? We are newbies, but we think this should be pretty straightforward.
    We have also tried to do that with the Analysis tools administrator, with the same result.
    We are using Web Analysis 9.3.1.
    Any feedback will be appreciated.
    Thank you
    Edited by: hectorsosar on 22/06/2009 02:31 PM

    It got fixed by removing a filter from a dimension, and placing that dimension as a page.
    Thanks,
    Hector

  • What happended to the Solaris Crash Analysis Tool 4.2 for Solaris 10?

    What happended to the Solaris Crash Analysis Tool 4.2 for Solaris 10?
    I'm trying to debug a kernel panic under Solaris 10 on sparcv9. I tried the SUNWscat 4.1 package but it core dumps on Solaris 10. I found a blog entry that described the problem and mentioned a version 4.2 fix. That was from May 2006, but I have not found any update sense then. Was 4.2 ever released or is their an alternative tool for Solaris 10 that I can use?

    One problem is that those of us who develop Solaris CAT do so as a "hobby" as it's not part of our actual jobs. But he good news is that management gave us the time to get a release out and 5.0 is now available here . We're now planning 6 month releases so we don't have a 5 year delay between updates.
    BTW, the Solaris Crash Analysis Tool supports Solaris 10, OpenSolaris/Solaris Nevada, sparc, and x86/x64.
    There are so many enhancements and bug fixes that I'd recommend reading the release notes (SUNWscat/docs/index.html).
    -- Dana

Maybe you are looking for