RTP sample (AVRtpTransmit sample file) takes too much time to start tx

Hi,
I am new to JMF and trying to use AVRTPTransmit sample code to transmit mp3 or wav file to destination RTP client. It takes time for processor to go in realize state and transmitter to start RTP. Instead of starting immediately it is taking more than 10 seconds.
I am trying to make a voip call and pass the RTP traffic to one party. But because of this delay the caller hears dead silence for a long time before hearing the wav file.
I would appreciate any help in this.
Thanks

vijaygaur wrote:
Hi,
I am new to JMF and trying to use AVRTPTransmit sample code to transmit mp3 or wav file to destination RTP client. It takes time for processor to go in realize state and transmitter to start RTP. Instead of starting immediately it is taking more than 10 seconds.I'm unfamiliar with this "AVRTPTRansmit" sample code you're talking about... It sounds like perhaps you're not appending the "file://" prefix to the input file locator, and as such, JMF is having to iterate through all of the different plugins looking for your file...

Similar Messages

T400 takes too much time to start or shutdown

I got a lenovo thinkpad T400, everything seems to be fine but lot of issues.
1. It takes too much time to start or shutdown (I purchased 2GB turbo memory along with the system for $50, but no use).My system is slower than 2.2 GHz(mine is 2.53GHz)
2.Fingerprint Reader: When I tried to login using my fingerprint reader it gives an error message "computer is locked only authorized user can login", when we need to type in Password every time, why Finger print reader is used ?
Connectivity: All laptops around can see all networks but not mine, my system couldn't see any networks. Why ?
4. System strucks suddenly staying irresponsible for while.!!!!!!!!!!!
When I tried to talk to CSR, they instructed to format my system using the CD's which they are going to send.When I tried to do so; an error message occurred when I inserted second CD ,that "please insert suitable/matchable(don't remember exactly) CD.
I have other question; the CD's sent by lenovo are not AUTO PLAYABLE ?

what if you press your blue thinkvantage button during startup? does it take you to the recovery partition?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Fcp x 10.1.4 suddenly take too much time to start ?

Fcpx 10.1.4 suddenly take too much time to start ?
Im working on the new retina imac 27 5i standard setup
everything was working nice and smooth
yesterday after i uninstall some plugins fcpx & motion become very slow start up
almost like its been remove from the fast fusion part of the Hd ?
Thanks
Gil

Same problem. Very, very slow Start after Yosemite 10.10.2 beta Update an Final Cuty 10.1.4.

Virtual machine take too much time to start on vmware

hi ,
i have install Windows 2003 enterprise and SOLMAN on vmware with 3 gb of ram assign to the virtual machine .
when i start the virtual machine it takes 15 to 20 min to start . can any one tell me the solution for this .
thanks in advance.

Well I tried the same thing. But unfortunately I did a corrupted installation.
But I assigned 12GB of virtual memory for the VMWARE WIN 2003 SERV OS and I installed it on WIN 7 32 BIT HOME PREMIUM and set the virtual memory to 15GB and assigned 2 CPUS.
The main problem you are facing is maybe because of you forgot to install VMWARE tools or had a corrupted installation. I had the same problem. Also try to keep the screen resolution to a minimum of 800*600. I suggest you to reinstall the VMware tools once again and give it a shot.
Just wanted to add that I reinstalled successfully and its running really good.
Hope this helps and good luck
Anirban
Edited by: santra.anirban on Sep 20, 2010 2:18 PM

Sap application takes tooo much time to start

sir my sap solution manager server takes too much time to start,
when i saw in windows mmc it shows that system is accesing the <sid>\sys\global\security\lib\engine\iaik_jce.jar(which is accesing by nearly 20 to 30 min )during this in application log it shows error like ,
1. transation canceled 15   100()
2.runtime error" CREATE_DATA_UNKNOWN_TYPE
CAN any one hlp

hi thanks for responding
actually today when i start the system it shows many error in every miniute like operating system call connection failed(no. 100061)
with every same in my last post .
this is st22 dump
Current Date Time Application Server User Name Client ID Keep Name of runtime error Exception Appl. component Report Name Index of Work Process Transaktions-ID
17.06.2010 10:11:33 solman_ASM_00 SMD_RFC 300 C CREATE_DATA_UNKNOWN_TYPE CX_SY_CREATE_DATA_ERROR     0 70C979DF97D7F14AB156000C29EE2DC4
17.06.2010 10:11:32 solman_ASM_00 SMD_RFC 300 C CREATE_DATA_UNKNOWN_TYPE CX_SY_CREATE_DATA_ERROR     0 70C979DF97D7F14AB156000C29EE2DC4
17.06.2010 10:10:42 solman_ASM_00 SMD_RFC 300 C CREATE_DATA_UNKNOWN_TYPE CX_SY_CREATE_DATA_ERROR     1 70C979DF97D7F14AB156000C29EE2DC4
17.06.2010 10:10:38 solman_ASM_00 SMD_RFC 300 C CREATE_DATA_UNKNOWN_TYPE CX_SY_CREATE_DATA_ERROR     1 70C979DF97D7F14AB156000C29EE2DC4
17.06.2010 10:09:29 solman_ASM_00 SMD_RFC 300 C CREATE_DATA_UNKNOWN_TYPE CX_SY_CREATE_DATA_ERROR     1 70C979DF97D7F14AB156000C29EE2DC4
17.06.2010 10:07:37 solman_ASM_00 SMD_RFC 300 C CREATE_DATA_UNKNOWN_TYPE CX_SY_CREATE_DATA_ERROR     0 70C979DF97D7F14AB156000C29EE2DC4
17.06.2010 10:07:36 solman_ASM_00 SMD_RFC 300 C CREATE_DATA_UNKNOWN_TYPE CX_SY_CREATE_DATA_ERROR     0 70C979DF97D7F14AB156000C29EE2DC4
17.06.2010 10:07:28 solman_ASM_00 SMD_RFC 300 C CREATE_DATA_UNKNOWN_TYPE CX_SY_CREATE_DATA_ERROR     0 70C979DF97D7F14AB156000C29EE2DC4
17.06.2010 10:07:06 solman_ASM_00 SMD_RFC 300 C CREATE_DATA_UNKNOWN_TYPE CX_SY_CREATE_DATA_ERROR     0 70C979DF97D7F14AB156000C29EE2DC4

PDPageDrawContentsToWindowEx takes too much time

We are using an Acrobat plugin that renders the PDF file to a bitmap in memory.
We are using Acrobat Professional X. But same problems also appear on Acrobat 9.
We have received several problematic PDF files from our customers that is causing the call that renders the image -
PDPageDrawContentsToWindowEx() to take unreasonably long time.
My target resolutions is 600 dpi but I couldn't wait for the call to return, after more than 6 minutes I kill the process.
The same PDFs render in Acrobat with slight delay (flickering and repainting) but in reasonable time.
I have written for this problem on previous occasions (Aug 5 2010). Since then further problematic samples
show that is linked somehow with transparency being present, but not on all PDFs with transparency.
We have a fast computer so the problem is somewhere in the PDF analysis.
Trying to optimize the file didn't help.
Checking with Preflight for PDF syntax issues also didn't find anything.

I'll have to check the headers, but I KNOW that we exposed it to plugins in A9 – it was necessary since we pulled the DrawToWindow call on the Mac (carbon vs. cocoa).
What you are asking the SDK to do is going to be painful on large complex images. Drawing into an HDC/Window adds SIGNIFICANT overhead to our rendering process, since we have to do all the work in our own "bit buffer" and then copy that buffer into the OS's provided HDC. OUCH! This is why DrawToMemory is better.
Additionally, if you have files with complex transparency AND you want OverprintPreview, that's also going to be VERY complex rendering pipeline – made WORSE by the need to end up in an HDC. Forgetting separations for the moment, consider that we have to convert everything to CMYK (since you can only compute OP in CMYK), blend colors, then convert all of that to RGB. And that's assuming SIMPLE transparency. If you have multiple blending groups, soft masks, etc. then you just raised the bar even more!
How long does it take Acrobat to open up the PDF and render it completely to screen? For separations, how long does it take to do a "Flatten Transparency" operation?
UpdateRect won't help because of the OP and then transparency flattening
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Mon, 5 Dec 2011 06:45:46 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: PDPageDrawContentsToWindowEx takes too much time
Re: PDPageDrawContentsToWindowEx takes too much time
created by Nikolay Tasev<http://forums.adobe.com/people/Nikolay+Tasev> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4064198#4064198

White MacBook takes too much time to boot up

Hi there.
I got the topcase(keyboard) of my MacBook repaired. (White MacBook 2006) and after that it takes nearly 7 up to 10 seconds after pressing the power button that I first see apple logo and it boots up.
I'm not sure but seems like that detecting the hardwares take too much time .
any solution?
PS: I'm running Snow Leopard(10.6.2)

macbig wrote:
OK, 32 seconds is not good. I don't think it has anything to do with a keyboard repair. You need to try a little maintenance: Reset Pram - http://docs.info.apple.com/article.html?artnum=2238
Repair Permissions - http://support.apple.com/kb/HT1452
Run Disk Utility >applications>utilities>disk utilities>verify disk
How much free space do you have on your HD: Right click on HD icon and select "get info" in the drop down menu (if you don't have right click capabilities, highlight your HD icon, go file in the Apple menu, and select "get info" in the drop down menu. Let us know your results.
Yes PRAM was the the problem, I've already tried it from this thread http://discussions.apple.com/thread.jspa?threadID=2303507&tstart=0
by the way thank you .

Parsing the query takes too much time.

Hello.
I hitting the bug in в Oracle XE (parsing some query takes too much time).
A similar bug was previously found in the commercial release and was successfully fixed (SR Number 3-3301916511).
Please, raise a bug for Oracle XE.
Steps to reproduce the issue:
1. Extract files from testcase_dump.zip and testcase_sql.zip
2. Under username SYSTEM execute script schema.sql
3. Import data from file TESTCASE14.DMP
4. Under username SYSTEM execute script testcase14.sql
SQL text can be downloaded from http://files.mail.ru/DJTTE3
Datapump dump of testcase can be downloaded from http://files.mail.ru/EC1J36
Regards,
Viacheslav.

Bug number? Version fix applies to?
Relevant Note that describes the problem and points out bug/patch availability?
With a little luck some PSEs might be "backported", since 11g XE is not base release e.g. 11.2.0.1.

Finishing Backup takes too much time.

Finishing backup takes too much time in my system , sometimes 30 minutes even 1 hour! and sometimes right after finishing backup(before the icon in the menu bar stops) it starts to take another backup( and usually 10MB or something small !) or the estimation is wrong .
Sometimes I see my system that is taking backups hours and hours(just with small stops!)
and the speed rate I of data transfer is reduced, while I set it to be on maximum speed in Time Capsule.

And the log with Time-stamps from Console
4/6/09 2:31:24 PM /System/Library/CoreServices/backupd[2141] Starting standard backup
4/6/09 2:31:34 PM /System/Library/CoreServices/backupd[2141] Mounted network destination using URL: afp://[email protected]/Sina's%20Time%20Capsule
4/6/09 2:31:34 PM /System/Library/CoreServices/backupd[2141] Backup destination mounted at path: /Volumes/Sina's Time Capsule
4/6/09 2:31:39 PM /System/Library/CoreServices/backupd[2141] Disk image /Volumes/Sina's Time Capsule/Sina’s MacBook_0017f2347181.sparsebundle mounted at: /Volumes/Backup of Sina’s MacBook
4/6/09 2:31:39 PM /System/Library/CoreServices/backupd[2141] Backing up to: /Volumes/Backup of Sina’s MacBook/Backups.backupdb
4/6/09 2:39:45 PM /System/Library/CoreServices/backupd[2141] No pre-backup thinning needed: 862.6 MB requested (including padding), 205.56 GB available
4/6/09 2:46:52 PM /System/Library/CoreServices/backupd[2141] Bulk setting Spotlight attributes failed.
4/6/09 2:48:07 PM /System/Library/CoreServices/backupd[2141] Unable to rebuild path cache for source item. Partial source path:
4/6/09 2:48:07 PM /System/Library/CoreServices/backupd[2141] Unable to rebuild path cache for source item. Partial source path:
4/6/09 2:48:07 PM /System/Library/CoreServices/backupd[2141] Unable to rebuild path cache for source item. Partial source path:
4/6/09 2:50:06 PM /System/Library/CoreServices/backupd[2141] Unable to rebuild path cache for source item. Partial source path:
4/6/09 2:50:06 PM /System/Library/CoreServices/backupd[2141] Unable to rebuild path cache for source item. Partial source path:
4/6/09 2:57:21 PM /System/Library/CoreServices/backupd[2141] Bulk setting Spotlight attributes failed.
4/6/09 3:03:57 PM /System/Library/CoreServices/backupd[2141] Unable to rebuild path cache for source item. Partial source path:
4/6/09 3:03:58 PM /System/Library/CoreServices/backupd[2141] Unable to rebuild path cache for source item. Partial source path:
4/6/09 3:03:58 PM /System/Library/CoreServices/backupd[2141] Unable to rebuild path cache for source item. Partial source path:
4/6/09 3:12:55 PM /System/Library/CoreServices/backupd[2141] Copied 29426 files (162.6 MB) from volume Macintosh Disk.
4/6/09 3:17:36 PM /System/Library/CoreServices/backupd[2141] No pre-backup thinning needed: 678.9 MB requested (including padding), 205.56 GB available
4/6/09 3:37:18 PM /System/Library/CoreServices/backupd[2141] Bulk setting Spotlight attributes failed.
4/6/09 3:37:57 PM /System/Library/CoreServices/backupd[2141] Copied 2362 files (100.3 MB) from volume Macintosh Disk.
4/6/09 3:42:00 PM /System/Library/CoreServices/backupd[2141] Starting post-backup thinning

Language import takes too much time in ECC EHP4 system

Hi All,
We are trying to import the Languages in to ECC EHP4 system ...But each Language takes almost 48 hours to get imported.
and even the language supplementation takes too much time ...
Please help in tuning the memory parameter if required ...and the Data Base is DB2

Hi,
So what is your system details ?
OS ?
Have you just installed the system ?
Just upgraded to EHP4 ?
Any trace files ?
what is the system load.....
Mark

Itunes takes too much time to open and don´t recogneize my iphone

itunes takes too much time to open and don´t recogneize my iphone
I´ve alredy unistall and re install and didn´t work

5-10 minutes is normal for me when opening iTunes. But then my library is stored on network drive which slows everything down.
There has been many posts about problems with RAID and iTunes. Don't know if any of those relate.

Bought i phone 6 64 GB just 3 days before performance is very bad.Couldn't even open app store it takes too much time for opening a web page.

bought i phone 6 64 GB just 3 days before performance is very bad.Couldn't even open app store it takes too much time for opening a web page.

You may need to reset your network settings, making sure the network you're accessing is stable: tap Settings > General > Reset > Reset Network Settings.
If your iPhone still can't connect to App Store, tap Settings > iTunes & App Store > tap the Apple ID and sign out > later, sign in with your Apple ID.

Azure Data Sync Log Take Too Much Time to Load

Hi,
I've found that the Azure Sync Log inside the Portal take too much time to load if my sync group was created long time ago. i.e. for those new sync group with only a few logs, it will take around 5 seconds for loading. However, I've many sync group created
more than 1 year, and it will take me up to 10 minutes for viewing the first page of the logs.
It seems the Portal will download ALL the logs to my browser even I just want to view the most recent logs (maybe I just want to view the last 10 records, but it will download the whole 5000 pages?)
It will be great if the Portal only fetch the data of the page I am currently viewing, instead of fetching all the logs.
Is there any ways to speed up the log loading time?
Michael Yung

Hello,
I suggest you post a feedback on
Azure SQL Data Sync feedback forum.
All of the feedback you share in the forum will be monitored and reviewed by the Microsoft engineering teams responsible for building Azure.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Bootcamp: WinXP: Network initialization takes too much time

Hey
I've set up a BootCamp partition on my Macbook 6,1: Windows XP Professional 32-bit SP3 (up-to-date).
Its a fresh installation, with latest BootCamp drivers.
From start on, the network-initialization takes too much time:
- Windows boots up
- Enter password
- Desktop appear
- after 2-3 minutes, the network symbols appear in the taskbar.
If I open the System Control panel and want to enter the networking-devices it loads until network is really initiated.
I also can't browse to any web-site (through IE).
So, it seems that something blocks or prevent the networking from fast start-up.
I've tried to disable WLAN, same problem
If I disconnect all connections (no LAN-cable, no WLAN configured) its still the same problem.
Does anybody have a similar issue?

You can read: I have installed BootCamp (Lions one said no, but I have an MacBook 6,1 - Yep, this one was shipped with Snow Leopard, so I have the "old" BootCamp drivers with XP-drivers on my Install-disc.).
The BootCamp drivers from the Mac OSX 10.6 CD are installed and updated through Apple-Update.
So, WinXP should be supported?

The queries takes too much time

Hi,
I want to compare time of queries between Spatial and PostGIS, but Spatial take too much time. I created spatial indexes in both databases so I have no idea where can be the problem :-(. I'm actually student and I try this for my essay, but I start with Oracle by myself so I'll appreciate some help.
I have table with cca 7000 polygons and I want to create new table like dissolve these polygons by attribute katuze.
Query in Spatial takes 8506 s :
CREATE TABLE dp_diss_p AS
SELECT KATUZE_KOD, SDO_AGGR_UNION(
MDSYS.SDOAGGRTYPE(a.geom, 0.005))GEOM
FROM dp_plochy a GROUP BY a.KATUZE_KOD;
Query in PostGIS takes 10.149 s :
CREATE TABLE plochy_diss AS
SELECT st_union(geom) AS geom
FROM plochy
GROUP BY katuze_kod;
I really don't know what to do, please give somebody me some advice :-(. Please excuse my English.
Thx Eva

I tryed use the sdo_aggr_set_union like this:
CREATE OR REPLACE FUNCTION get_geom_set (table_name VARCHAR2,
column_name VARCHAR2,
predicate VARCHAR2 := NULL)
RETURN SDO_GEOMETRY_ARRAY DETERMINISTIC AS
type cursor_type is REF CURSOR;
query_crs cursor_type ;
g SDO_GEOMETRY;
GeometryArr SDO_GEOMETRY_ARRAY;
where_clause VARCHAR2(2000);
BEGIN
IF predicate IS NULL
THEN
where_clause := NULL;
ELSE
where_clause := ' WHERE ';
END IF;
GeometryArr := SDO_GEOMETRY_ARRAY();
OPEN query_crs FOR ' SELECT ' || column_name ||
' FROM ' || table_name ||
where_clause || predicate;
LOOP
FETCH query_crs into g;
EXIT when query_crs%NOTFOUND ;
GeometryArr.extend;
GeometryArr(GeometryArr.count) := g;
END LOOP;
RETURN GeometryArr;
END;
CREATE TABLE dp_diss_p AS
SELECT KATUZE_KOD, sdo_aggr_set_union (get_geom_set ('dp_plochy', 'geom','CTVUK_KOD <>''1'''), .0005 ) geom
FROM dp_plochy a GROUP BY a.KATUZE_KOD;
It takes 21.721 s, but it return type of collection and I can't export it to *.shp because Georaptor export it like 'unknown' . Has anybody idea what can I do with it to export it like polygon?
Eva

RTP sample (AVRtpTransmit sample file) takes too much time to start tx

Similar Messages

Maybe you are looking for