RTSP Issue unable to connect server

Please advise on how to resolve RTSP port 554 issues.

I have that problem too.
When my users try to connect to mms://stream.camara.gov.br/tvcamara1t200 with wccp redirection, the WMPlayer open, but not start the streaming. With explicit forward the same problem occurs.
On the ironport i have that logs every time i try to connect:
1413465831.698 29 XX.XX.XX.XX TCP_MISS/302 432 GET http://stream.camara.gov.br/tvcamara1t200 - DIRECT/stream.camara.gov.br text/html ALLOW_CUSTOMCAT_12-DefaultGroup-DefaultGroup-NONE-NONE-NONE-DefaultGroup <C_Whit,4.9,-,"-",-,-,-,-,"-",-,-,-,"-",-,-,"-","-",-,-,IW_gov,-,"-","-","Unknown","Unknown","-","-",119.17,0,-,"-","-"> - "16/Oct/2014:13:23:51 +0000" - NONE
and
1413465173.395 6 XX.XX.XX.XX TCP_HIT/200 521 GET http://stream.camara.gov.br/tvcamara1t200.asx - NONE/- video/x-ms-asf ALLOW_CUSTOMCAT_12-DefaultGroup-DefaultGroup-NONE-NONE-NONE-NONE <C_Whit,4.9,-,"-",-,-,-,-,"-",-,-,-,"-",-,-,"-","-",-,-,IW_gov,-,"-","-","Unknown","Unknown","-","-",694.67,0,-,"-","-"> - "16/Oct/2014:13:12:53 +0000" - NONE
Some one have advises?

Similar Messages

Unable to connect, server not responding

Hello,
We've resurrected a machine running 10.4.x from the dead back into use but it isn't happy with our network. It is configured correctly as far as I can tell. It responds to pings, can browse websites, and can mount other drives; however, when I try to mount the 10.4.x machine's drive from another machine I get the following:
"Unable to connect - server not responding." Which I know is completely untrue after testing ping.
I only entered the ip address in the Go > Connect to Server dialog. When attempting to connect from another machine I see a little more output:
"The finder cannot complete the operation because some data in "afp://10.0.1.7" could not be read or written. (Error code -36)"
I am lost here, any help or observations are highly appreciated.

Hi kssi89, and a warm welcome to the forums!
Well, in pure Apple File System talk... -36 ioErr I/O error (bummers)
Not very helpful, but generally means a Drive quit being Readable or Writable since starting the operation...
http://fuzzy.wordpress.com/2006/12/10/ioerror-36/
But, in this instance I think it's not even starting to.
Assuming Personal File Sharing is on on that machine & Internet Sharing is OFF, I might try trashing these, reboot and set it up again...
/Users/YourUserName/Library/Preferences/ByHost/com.apple.networkConnect.<12 digit number>.plist
/Users/YourUserName/Library/Preferences/com.apple.internetconnect.plist
/Library/Preferences/SystemConfiguration/preferences.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
/Library/Preferences/com.apple.sharing.firewall.plist

IP Printing Issue -- Unable to connect and print

I'm trying to print to a network printer that's connected by cable to my wireless router using IPP. The error message reads "Unable to connect to IPP host." The IP address I used for the printer was obtained from the printer test page. I also specified "generic postscipt printer" in the printer setup utility window. My printer and network info as follows:
Printer -- HP LaserJet 4MV
Router -- Linksys Wireless G
Computer -- Powerbook G4, OSX.4
I've reset the printers in the Printer Utility to use the latest version driver for the HP. I can browse using my PBk so my wireless connection is working (in fact the PBk is in the same room as the router). Any suggestions would be very much appreciated.

I don't have a manual for the printer and I'm not aware of a print server being included in the hardware. The printer is simply a HP LaserJet 4MV which has a I/O card installed with local talk, 10Base-T, parellel, and BNC connections. I'm using the 10Base-T connection to my router.
On the test page printout, it lists several things one of which is "Server Name" but it's blank with no entry. Under the heading "Mode" the entry reads "Queue Server." Don't know if any of this is relevant.

Unable to connect server

I connect an USB pen to Technicolor router for content sharing.
All pc's can access to this shared partition except my Mac that give allways the message "Unable to connect the server".
I tried inserting the IP adress or using finder but .
Can anyone give me a hint?
Thanks

Hi,
I suggest you to follow the below steps to import Publish Settings File using Visual Studio
In Visual Studio 2013, open Solution Explorer, right-click the project then click Add and then Connected Service....
In the Services Manager dialog, click Create service..., then select <Import...> from Subscription in the Create Mobile Service dialog.
In Import Azure Subscriptions, click Download subscription file, login to your Azure account (if required), click Save when your browser requests to save the file.
NOTE: The login window is displayed in the browser, which may be behind your Visual Studio window. Remember to make a note of where you saved the downloaded .publishsettings file. You can skip this step if your project is already connected
to your Azure subscription.
Click Browse, navigate to the location where you saved the .publishsettings file, select the file, then click Open and then Import.
Visual Studio imports the data needed to connect to your Azure subscription. When your subscription already has one or more existing mobile services, the service names are displayed.
NOTE: After importing the publish settings, consider deleting the downloaded .publishsettings file as it contains information that can be used by others to access your account. Secure the file if you plan to keep it for use in other
connected app projects.
Hope this helps !
Regards,
Sowmya

Issue with Oracle Connection Server

Hi,
we have installed Oracle Connection Server to publish the content from UCM 11g to a webserver. UCM 11g installation, Connection server installation went well, we have installed CNS component in UCM. When we check-in a content item which matches CNS archive criteria, the following error is thrown, please help in resolving the issue.
!csIndexerTerminatedByException,update!syJavaExceptionWrapper,java.lang.NoSuchFieldError: m_nodes
java.lang.NoSuchFieldError: m_nodes
at com.kinecta.adapter.contentserver.component.CNSXmlDataMerger.getNodes(CNSXmlDataMerger.java:27)
Many Thanks

Hi ,
Per the following documentation : http://docs.oracle.com/cd/E23943_01/doc.1111/e16451/ecm_post_upgrade.htm#FUECM260
Connection server is not the recommended way to move files . It should be SSP for Site assets alone .
I am not even sure if CNS can crawl contents like it used to do in UCM 10g .
Thanks,
Srinath

New install issue-unable to connect to DB server from a remote client.

Hi experts,
I am new to setting up oracle server so pls bear with me...
I setup a db server (11g on top of 64bit Oracle Linux) at home (static 192.168.1.90). I verified that db, listener are up and running. However, I tried to connect to the server from a different client machine (192.168.1.108) within my home network but the server cannot be reached. I was able to ping both client and server using the IP addresses and hostnames. I followed the following steps to perform troubleshooting but was unable to move on beyond step 3, telnet-ing the server on port 1521. Can someone help me out what I should do make the port # (1521) is reachable by the client?
1. Check with "ping" using the IP address ("ping 198.11.34.43"
2. Check with "ping" using DNS name (e.g. "tnsping uranus")
3. Try telnet to the IP on port 1521 (telnet 1.2.3.4 1521)
4. Check with "tnsping" using TNS service name
5. Invoke SQL*Plus from the OS command line "sqlplus fred@flintstone". If this fails, check to ensure that your listener is the flintstone service defined.
6. Sign-on to SQL*Plus and connect with the TNS name ("connect fred/flintstome@service_name"
7. Within SQL*Plus, try a select from table@remote_db_link
thanks a lot in advance.

user6391746 wrote:
Hi experts,
I am new to setting up oracle server so pls bear with me...
I setup a db server (11g on top of 64bit Oracle Linux) at home (static 192.168.1.90). I verified that db, listener are up and running. However, I tried to connect to the server from a different client machine (192.168.1.108) within my home network but the server cannot be reached. I was able to ping both client and server using the IP addresses and hostnames. I followed the following steps to perform troubleshooting but was unable to move on beyond step 3, telnet-ing the server on port 1521. Can someone help me out what I should do make the port # (1521) is reachable by the client?
1. Check with "ping" using the IP address ("ping 198.11.34.43"
2. Check with "ping" using DNS name (e.g. "tnsping uranus")
3. Try telnet to the IP on port 1521 (telnet 1.2.3.4 1521)
4. Check with "tnsping" using TNS service name
5. Invoke SQL*Plus from the OS command line "sqlplus fred@flintstone". If this fails, check to ensure that your listener is the flintstone service defined.
6. Sign-on to SQL*Plus and connect with the TNS name ("connect fred/flintstome@service_name"
7. Within SQL*Plus, try a select from table@remote_db_link
thanks a lot in advance.solution depends upon which ERROR is thrown.
Is COPY & PASTE broken for you?
It is really, Really, REALLY difficult to fix a problem that can not be seen.
use COPY & PASTE so we can see what you do & how Oracle responds.

Versamail issue - unable to connect to sbcglobal email servers

I am attempting to access my sbcglobal email account. I believe I have everything set up correctly, but I continue to receive the following error message: "There is a delay in server communication causing a timeout. Please try again." It appears that I am connecting to the mail server successfully, but I don't get any farther than that. Does anyone know what I may be doing wrong?
Post relates to: Palm TX

I recall SBC/Yahoo DSL recently changed the port settings for their email servers. Check the website and make sure you have the correct ones set in VersaMail.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Unable to connect server localhost

Never had this problem in the past now suddenly i am unable to contact the server localhost, internet is working but certain pages doesn't work how can i solve this?
thnks in advance Roel

Never had this problem in the past now suddenly i am unable to contact the server localhost, internet is working but certain pages doesn't work how can i solve this?
thnks in advance Roel

Mail is unable to connect server because password check

Hi, since Tiger 10.4.7 I have the problem that Mail cannot connect to my POP mail server. The error message said that my password wouldn't be accepted from server.
I am sure that the password is correct because my pop server don't ask for a password (the server use single sign on from my internet access data).
The problem occurse very often if Mail runs a while (up to 1 hour) and than the cyclic email check fails. The error occours only at the first account in my list, the second is never affected. I tested this because I changed the order of my accounts and than the seconde (and now the first) account was affected by this problem.
Workaround is restart Mail and it will work the next hour.
Jan Lolling

Hi Jan.
I am sure that the password is correct because my
pop server
don't ask for a password
This doesn't make sense. What do you mean? How can a
password be correct if the server doesn't ask for it?
I had a similar problem. I change my password every three months, on the 1st. I changed, as usual, on the 1st of October, and instantly had problems.
Mail would sometimes refuse to connect, saying that it's got the wrong password. If I re-entered the password, Mail usually connected. Sometimes it didn't and I'd have to re-enter the password again. Meanwhile, that same password worked fine if I went to the .Mac web page, or to the discussions page, or to the iTunes store.
I quickly determined that it's not the password. It's not the server. It's Mail and/or the keychain. I dug out the old Keychain First Aid application, which no longer works. I dug out Keychain Access, which said that the last time I'd updated my .Mac password was July, which was incorrect. I quit Keychain Access and launched Mail, and was again told that Mail needed my .Mac password. I updated it, checked mail, quit Mail, and checked the keychain again. It still showed not updated since July. This meant that Mail was not talking to the keychain, for unknown reasons.
I updated the password in Keychain Access, saved and quit, and tried again... and again got the message that Mail had the wrong password. Quit Mail, relaunched Keychain Access, and found that Mail was not on the list of applications which could access that password. I added Mail to the list, saved and quit, relaunched Mail, and all is working.
At some time between July and today something happened which denied Mail access to the keychain. As I started having the problem after I updated to 10.4.8, I suspect the update.

"problem loading"; "unable to connect"; "server not found" - ??

Been using Firefox 6 years with DSl. Recently have gotten nothing but the above messages - can't open any pages! Got a new DSL modem, re-downloaded Firefox and still can't open any pages - not even mozilla.com or google or cnn.
Rebooted, restarted, etc.
Even tried to download Chrome, but it failed - and I couldn't find out why because the "tell me why" defaulted to Firefox.
... really no fan of IE ...

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
*http://kb.mozillazine.org/Error_loading_websites
You can try to reset (power off/on) the router.
Another possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

While playing or trying to open yahoo, sites go down with messages: Unable to connect, server not found, connection has timed out or the connection was reset.

this happens while opening yahoo or while playing a game. has been happening since July. WHY?
I AM NOT COMPUTER LITERATE, NEED EXPERT HELP!

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
*http://kb.mozillazine.org/Error_loading_websites
You can try to reset (power off/on) the router.
Another possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

Logon issue, unable to connect Netweaver AS JAVA via URL

As the installation guide indicates to use URL "http://<hostname>:5<Instance no.>00" to logon the system.
The system is up and running, is there any addtional config?
How to logon the system?

Hi Spencer,
Since it is a java stack only , so there will be no user like DDIC and SAP* at database level.
SAP* user is a kernel level user (which means hardcoded at kernel level) which is used in emergency situation.
J2EE_ADMIN user is present in DUAL stack since you having a java stack only then it that case you will have administrator user.
I know the default password for DDIC , SAP* and EARLYWATCH users but not for administrator.
You can check with default password such as 06071992 and 19920607(not sure)
The JAVA equivalents of the SAP* password, some history and a usefull tip.
With Regards
Ashutosh Chaturvedi

"unable to connect to server/OK"

I'm in iCloud ****.
I keep getting an intrusive prompt stating "New iCloud Terms and Conditions -- To use iCloud on this iPhone you must accept the new Terms and Conditions."
Underneath are options to "View Terms" or "Not Now."
When I click on "View Terms," I'm taken to iCloud settings, where "Terms and Condtions" is highlighted, invlting me to click. (All of the green buttons are inactive.) When I click on "Terms and Condtions," I get a prompt stating "Unable to connect server" -- the only option is to click on "OK," highlighted in blue. When you click on "OK," you're back to "Terms and Conditions" and can only toggle back and forth.
I paid $71 to Apple Care to try to get this resolved. After mulltiple attempted fixes -- such as downloading "Find My Friends" and trying to agree to the new terms and condtiions when setting that up, which didn't work -- it looks like I'm on my own.
Anybody out there familiar with this scenario? Anybody able to get around it?

You may not really be connected to your WiFi network.
Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the "i" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.

TS3899 I have a hotmail account set up on my ipod, but in the past two weeks I have had issues trying to pull up mail. I get a "unable to connect to the server" message. Any Ideas?

I have a 4th gen ipod toch. As of the past two weeks I have been unable to receive my hotmail on the ipod. I get a "unable to connect to the server" message and all older emails are now gone.

I have a 4th gen ipod toch. As of the past two weeks I have been unable to receive my hotmail on the ipod. I get a "unable to connect to the server" message and all older emails are now gone.

Unable to connect to Internet via Airport Express - 'cannot contact server'

I'm unable to connect to the internet via my Airport Express. I'm using OS 10.3.9, and had the same setup with no problems at a previous address, but with a different modem from the same ISP.
My AE is connected - the light is green - and my mac is connected to the network in Internet Connect. But when I open Safari I get an 'unable to contact server' message.
I've tried rebooting everything (modem, AE, Mac), and leaving modem/AE off for several minutes. Also reset the AE, but to no avail.
The connection works fine via Ethernet cable.
Any ideas?

Thanks, I checked out that advice doc (106798), but could not connect to the address (http://17.149.160.49) which is given to test if it's a DNS issue. My ISP says I shouldn't need DNS settings.
The service is PPPoE, and I went into Airport Admin Utility to check if the Airport was configured for this. Under Configure/Internet, I found it was set to 'Ethernet', so changed it to PPPoE. Then when I restarted I got connection status in the bar (and good Airport signal), but status flipped between 'looking for PPPoE host' and 'negotiating PPPoE host', sometimes sticking on one or the other each time I tried rebooting all gear.
Any other ideas?

RTSP Issue unable to connect server

Similar Messages

Maybe you are looking for