RTX signin problem?

HI,
I am unable to signin my skype using RTX 3088 dual phone. This is happend in march 2012 onwards. I don't know skype has fixed it or they are aware of this issue.
Any fix is available.
I have searched internet, seems there is no solution is available. Seems skype ditched phone users. Why are they selling this phone?.
Thanks
Siva

Last week I received information from a Dutch forum that this connection problem 'already' had been solved by Skype and that Skype should work now on almost every dual phone. Well in my case it did not. So again I tried every possible solution I could find on the internet including resetting the base station bij pushing the radio connection button and the skype button simultaniously (a reset option not mentioned in the Philips manual), but nothing worked. Then I used the on/of switch on the base station but no result as well. As a last desperate attemp I unplugged the whole thing, waited ten seconds, plugged it in again and..... it worked!! I only had to reset date, clock, volume etc. But to my surprise all my skype contacts (removed by earlier attempts) appearded in the contact list again. So: problem solved!

Similar Messages

PSE/PRE 11 Signin Problem

David,
I have an Adobe Photoshop Elements 11 and Adobe Premiere Elements 11
dilemma.
I recently received a birthday gift of both software programs.
Following Adobe instructions, I attempted to use Adobe Download Assistant.
It rejected my input with the following notation:
"This e-mail address is already in use. Please use a different e-mail
address."
How can I use a different address? [removed by forum host] is the only account I have used for 20 years.
Previously, I have had some contact with Adobe. Never have I had any
trouble.
As I am anxious to use both Photoshop Elements 11 and Premiere Elements 11,
I would greatly appreciate any assistance you might have to offer.
John F. Jackson
[signature removed by forum host]

David,
Thank you for your kind assistance.
I really appreciate all you are attempting to do for me.
John
In a message dated 12/11/2012 3:28:46 P.M. Eastern Standard Time,
[email protected] writes:
Re: PSE/PRE 11 Signin Problem
created by David Kastendick (http://forums.adobe.com/people/dave_m_k)
in Adobe ExportPDF - View the full discussion
(http://forums.adobe.com/message/4913303#4913303)

Elements 12 signin problem

PS Elements 12 continues to report that there is no internet connection or the pc clock is not set correctly; this is not the case. It reports this when the signin to the editor is made. The firewall is off, the antivirus is off, the clock has been reset; what else is there to do to login to the editor? Never had this problem with PS Elements 10.

Is this the first time you are trying to launch the editor with a view to registering it and activating it? If so then I suggest launch the editor in Trial mode and before doing anything, go to:
Help >> Updates
Let it finish updating the product and then you can now go back to:
Help >> Complete Adobe ID .......................
This should make sure the PSE is awake and can go to the Internet.
Good luck but post back if this worked or not.

Internet signin problem

I cannot sign in to the university of Miami website
https://wireless.med.miami.edu/login?
the wireless network is
Medical_Wireless
I have removed the Network then let the MacBook Pro find it again.
Safari stalls with a blank page when loading the public signin page.
My iPhone 4 works fine.

Firstly, yes - if you have already set up your account for Comes With Music on the PC then the PIN number is finished - you only use the PIN once.
I haven't used this service myself because it is not yet available in my country, so I'm working blind here, but did you have the phone connected to the PC in Media Transfer mode when you created your account on the PC? I thought the system would insist that the phone be connected, but if not maybe the phone isn't correctly registered against your account.
Can you download a Comes With Music track on the PC and transfer it to the phone? If not, what message do you get?
I have heard of some cases where a problem with the memory card can cause a phone not to be recognised by the service as the right phone, in which case reformatting the memory card usually fixes the issue.

Lync Signin Problem

I have 0 background of Lync and I have installed it by following step by step installation tips from web.
now when i try to sign in from client . it give me error " Lync couldn't find a lync server for abc.com. there might be an issue with the domain name system(dns) configuration for your domain please contact support team. "
give you background my ads for lyn is on 192.168.111.50 network and lync FE also on 192.168.111.77
and my client is on 192.198.1.50 ....
other thing if i am not in office or on office network and out side office how i can signin ????
Salman

Check you have set the DNS server on your client computer.
If you didn’t set that, you can’t retrieve the DNS records.
As the IP address of your client computer is not in the same subnet with your Front End.
You need to have a route between these two subnets.
To avoid to use the additional route, you can use a IP address in the same subnet with Front End.
Lisa Zheng
TechNet Community Support

Signin Problems

Hi
I am not able to login to ORACLE using SYS/SYSTEM id from my SQL*PLUS. Instead i am able to login using some id that is not the DBA id then from there it's allowing me to connect thru SYS/SYSTEM id. What is to be done so that i can connect directly without going through this way.
Thanks
Sugesh

Hi
I am using ORACLE 9i in WINDOWS. Then my question was that i am not able to connect to SQL*PLUSW using SYS/SYSTEM id directly instead i am now connecting to SQL*PLUSW thru scott and then from there using the command
connect sys/password as sysdba
to connect as DBA.
is there a way on how i can directly connect withby bypassing the first login that i am doing.
Stepwise:
1. Start->Programs->ORAHOME->APPLICATION DEVELOPMENT->SQLPLUSW
connect as scott/password
connected
then from there
connect as sys/password as sysdba
this what i am doing now
is there a way how i can
1. Start->Programs->ORAHOME->APPLICATION DEVELOPMENT->SQLPLUSW
connect as sys/password

OSX Mavericks Appstore signin problems

Cannot sign in to Appstore after OSX Mavericks update. The prompt window asking for username and password is stuck in a loop.

It's possible #1 will do the trick, but you might need to do the additional steps in Keychain access.
1. Delete the files /var/db/crls/crlcache.db and /var/db/crls/ocspcache.db. These can be found using Finder’s Go >; Go To Folder menu (Cmd + Shift + G). This resets the cache of accepted certificates in the system. It doesn’t remove them, it just forces the system to rebuild the caches upon restart.
2. Open Keychain Access (/Applications/Utilities/Keychain Access). Select Certificates in the Category picker on the left side. In the search bar, type in the word Class. Look through that list, and find any certificates that have a blue + symbol over their icon. These are the ones you need to modify.
Select one that has a blue +, and hit Command + I. Click the disclosure triangle beside the “Trust” list to show the list of permissions. Now, what we need to do is to set this certificate to use the system defaults. However, for some reason, when you select it, it doesn’t save. So what you need to do is this. Under “Trust”, where it says “Secure Sockets Layer (SSL)”, change the dropdown menu to say “No Value Specified”. Then, close the window. It will ask for your administrator permissions. Then, open the info pane for that certificate again. Under “Trust” again, now set the dropdown that says “When using this certificate:” to say “Use System Defaults”. You can then close out of the info pane, and enter your password again. Do this for any of the certificates that have a blue + on their icon. There should only be one or two at most.
(Note: I had to toggle the settings before it would stick)
Restart your system.

Getting "Oops! Your Skype Name isn't an email addr...

I'm using the latest version of Skype for Desktop, and getting the following error message when trying to login.
Oops! Your Skype Name isn’t an email address.. Try again or choose another way to sign in.
I've successfully logged in with the same information to the skype website.
Now I'm stumped - can anyone help me please ?
Solved!
Go to Solution.
Attachments:
signin problem.jpg ‏82 KB

This is a problem with your Windows configuration, apply the .css registry patch to resolve the issue:
http://community.skype.com/t5/Windows-desktop-client/Skype-empty-sign-in-screen-Issue/m-p/2126425/hi...

A revolution is coming....how long should I wait?

Lots of hype for Verizon. My email just gets worse and worse. Several "internal error" messages and "cannot process your request". Might be a good idea to fix the darn thing.......FINALLY!

The revolution is coming referred to the new faster speed offerings. Nothing else.
Yes their have been some website signin problems that have effected logins.
Personally I use a PC client based email, and it usually hasn't been effected.

RTX 4088 dualphone Problem

My RTX 4088 dualphone serial number is 0003070700865. I can clearly hear the voice from the caller but my voice can not be heard clearly at the other end. I have made a reset and firmware update already but the pronlem still persist. This problem is true to Skype calls and landline cslls.
Appreciate your help.

Dear Readers,
Thank you for your reports which I have alerted Chat & Vision to. That said, the more efficient way to request assistance is to file with Skype Customer Service and/or Chat & Vision Customer Service as at that time you can include the order or transaction number and date of purchase, which cannot be posted here on the public Community.
Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
As you know you wish to contact Customer Service, skip past Step 2 of the instruction where various articles and information will be presented for you to review and proceed to Step 3, Continue Support Request.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Microphone problems with the RTX Dual phone 4088

Hi everyone ,
At present when you the handset to call ... I can hear people, but they cannot hear me.
Funny, it worked well yesterday. Would this be a skype problem or a handset problem? I cannot find anything in the RTX Manual how to increase the microphone sound.
Your feed back is welcome.
Father Ed Bakker

Hi, John,
I have referred your enquiry to Skype's partner vendor for more information.
Kind regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Icloud signin maximum account problem

When i signin Icloud it shows MAXIMUM ACCOUNTS problem.. Anyone helps me in this regard. I'll be thankful.

Create your new AppleID on a computer or other Internet capable device.
Once created, you will be able to use that AppleID on your iPhone.

Outgoing SMTP Authentication Method Problem (functional option, require signin, not available)

Hello all,
I'm trying to set up an account on my Thunderbird and I'm having a weird problem. I can receive emails on it fine but I cannot send any emails. Whenever I try to send any emails I get the error message "Syntactically invalid EHLO argument(s)".
This email address that I'm trying to add as an account on Thunderbird works perfectly fine in my Gmail Android app on my phone. The difference in the Outgoing SMTP settings are that on my (working) gmail app the Security Type = NONE and the "Require signin" box is CHECKED, whereas in Thunderbird I can set my Outgoing SMTP Security Type setting to = NONE but I do not have the option to "Require signin". All of the options that are available do not work.
Is there any solution?
Thank you!
Best, Nick

Hi Toad-Hall, thanks for offering to help. Here's the text below. Please let me know if you think this could be a Thunderbird issue, or more likely with my host...
Best,
Nick
Application Basics
Name: Thunderbird
Version: 31.6.0
User Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.9; rv:31.0) Gecko/20100101 Thunderbird/31.6.0
Profile Folder: Show in Finder
Application Build ID: 20150330093429
Enabled Plugins: about:plugins
Build Configuration: about:buildconfig
Memory Use: about:memory
Mail and News Accounts
account1:
INCOMING: account1, , (imap) hnht-6bph.accessdomain.com:143, plain, passwordCleartext
OUTGOING: hnht-6bph.accessdomain.com:587, plain, passwordCleartext, true
account2:
INCOMING: account2, , (none) Local Folders, plain, passwordCleartext
account3:
INCOMING: account3, , (imap) hp87.hostpapa.com:993, SSL, passwordCleartext
OUTGOING: hp87.hostpapa.com:465, SSL, passwordCleartext, true
account5:
INCOMING: account5, , (imap) imap.googlemail.com:993, SSL, passwordCleartext
OUTGOING: smtp.googlemail.com:465, SSL, passwordCleartext, true
account6:
INCOMING: account6, , (im) prpl-gtalk, plain, 0
Crash Reports
Extensions
gContactSync, 2.0.4, true, [email protected]
Lightning, 3.3.3, true, {e2fda1a4-762b-4020-b5ad-a41df1933103}
Manually sort folders, 1.1, true, [email protected]
Provider for Google Calendar, 1.0.4, true, {a62ef8ec-5fdc-40c2-873c-223b8a6925cc}
S3.Google Translator, 4.02, true, s3google@translator
Mark Read On Reply and Reply-All, 2.1, false, [email protected]
Important Modified Preferences
Name: Value
accessibility.typeaheadfind.flashBar: 0
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size_cached_value: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
extensions.lastAppVersion: 31.6.0
font.internaluseonly.changed: true
font.name.monospace.el: Consolas
font.name.monospace.tr: Consolas
font.name.monospace.x-baltic: Consolas
font.name.monospace.x-central-euro: Consolas
font.name.monospace.x-cyrillic: Consolas
font.name.monospace.x-unicode: Consolas
font.name.monospace.x-western: Consolas
font.name.sans-serif.el: Calibri
font.name.sans-serif.tr: Calibri
font.name.sans-serif.x-baltic: Calibri
font.name.sans-serif.x-central-euro: Calibri
font.name.sans-serif.x-cyrillic: Calibri
font.name.sans-serif.x-unicode: Calibri
font.name.sans-serif.x-western: Calibri
font.name.serif.el: Cambria
font.name.serif.tr: Cambria
font.name.serif.x-baltic: Cambria
font.name.serif.x-central-euro: Cambria
font.name.serif.x-cyrillic: Cambria
font.name.serif.x-unicode: Cambria
font.name.serif.x-western: Cambria
font.size.fixed.el: 14
font.size.fixed.tr: 14
font.size.fixed.x-baltic: 14
font.size.fixed.x-central-euro: 14
font.size.fixed.x-cyrillic: 14
font.size.fixed.x-unicode: 14
font.size.fixed.x-western: 14
font.size.variable.el: 17
font.size.variable.tr: 17
font.size.variable.x-baltic: 17
font.size.variable.x-central-euro: 17
font.size.variable.x-cyrillic: 17
font.size.variable.x-unicode: 17
font.size.variable.x-western: 17
gfx.direct3d.last_used_feature_level_idx: 1
mail.openMessageBehavior.version: 1
mail.spotlight.firstRunDone: true
mail.winsearch.firstRunDone: true
mailnews.database.global.datastore.id: ecc20ba1-ea64-2846-9e03-19fcbea83da
mailnews.database.global.views.conversation.columns: {"threadCol":{"visible":true,"ordinal":"1"},"flaggedCol":{"visible":true,"ordinal":"3"},"attachmentCol":{"visible":false…
mailnews.database.global.views.global.columns: {"threadCol":{"visible":true,"ordinal":"1"},"flaggedCol":{"visible":true,"ordinal":"3"},"attachmentCol":{"visible":false…
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1429703534
places.history.expiration.transient_current_max_pages: 104858
plugin.importedState: true
Graphics
Vendor ID: 0x10de
Device ID: 0x 863
WebGL Renderer: false
GPU Accelerated Windows: 2/2 OpenGL
AzureCanvasBackend: quartz
AzureSkiaAccelerated: 0
AzureFallbackCanvasBackend: none
AzureContentBackend: quartz
JavaScript
Incremental GC: 1
Accessibility
Activated: 0
Prevent Accessibility: 0
Library Versions
Expected minimum version
Version in use
NSPR
4.10.6
4.10.6
NSS
3.16.2.3 Basic ECC
3.16.2.3 Basic ECC
NSS Util
3.16.2.3
3.16.2.3
NSS SSL
3.16.2.3 Basic ECC
3.16.2.3 Basic ECC
NSS S/MIME
3.16.2.3 Basic ECC
3.16.2.3 Basic ECC

When using firefox I cannot signin to sites, but can get to sites with tabs on toolbar but cannot signout when I siginin, I have uninstalled the program and reinstalled it but still have the same problem?

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/891666]]</blockquote>
When using Firefox I cannot signin to sites, but can get to sites with tabs on toolbar but cannot signout whe signin, I have uninstalled the program and reinstalled it but still have the same problem.

That problem can be caused by the Yahoo! Toolbar that extents too much downwards and covers the top part of the browser window and thus makes links in that part of the screen not clickable.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
You can keep an eye on this thread:
*[[/forums/contributors/707748]]

CA issue - Workstation signin "There was a problem verifying the certificate from the server"

Hi,
We have issues with all workstations on our domain. I just recently setup Lync 2013 server on a windows 2012 OS. When I went to test sign-in, I received a message "There was
a problem verifying the certificate from the server". To fix this issue, I had to download the cert and import it into Trust Root Certification Authorities on the local workstation. This will be impossible if I have to do this for multiple machines.
Is there a way around this? Why is it asking to do this?
Thanks guys, much appreciated.
MM

You can follow the instructions here to use Group Policy to install your root certificate to all your workstations.
Or you could re-deploy your CA as an Enterprise CA.
Hi Georg,
Thank you for your reply.
I did deploy my CA as an Enterprise CA..... Not sure why its still asking me to install on workstations?
How can I confirm its an Enterprise CA?
Thanks,
MM

RTX signin problem?

Similar Messages

Maybe you are looking for