RTX vs ETS for DAQpad 6015 via USB

hello everyone,
I wish to use a DAQpad6015 via USB, that I already have, with one of
the two real-time operative system offered by NI, ETS and RTX, having
as target computer a Dell desktop PC. As far as I know RTX does not
support DAQmx software but at the same time I have read that for
installing ETS USB has to be disabled in the BIOS.
Is there any solution for using DAQpad6015 via USB with ETS or RTX?
Another requirement is to get the environment with the shortest possible time to prototype.
Should I get ETS or RTX?, assuming that there is no incompatibilities between any of them and the target desktop PC.
Thank you
Miguel

Hello Miguel,
USB is not supported under ETS or RTX. I would recommend any M-Series device for either of those RTOS.
Regards,
Gerardo
Message Edited by gcubed on 10-06-2005 08:38 AM

Similar Messages

Exactly what is input power for DAQPad-6015?

If we include the DAQPad-6015 in our system, what power do we connect it to? Using what type of cable or connector?

Hello Jack,
From the User Manual and Specifications, the power requirement is 9-25 V, 12W. Out of curiosity, did your unit not come with a power supply, or are you making your own?
See the attached picture for dimensional information of the power plug for the unit. Unfortunately, I do not have any part numbers for that plug.
Hope this helps,
Laura
Attachments:
power.JPG ‏8 KB

TS4488 iTunes won't recognize my AppleTV for a reset via USB

I need to restore my Apple TV with a USB cord. But, I can't get iTunes to pick up the device - there is no error message, it just doesn't recognize that anything is plugged in. I've followed the order of the restore instructions - unplug everything, plug in USB cord to ATV and laptop, open iTunes, no power cord. (2nd generation.) But, nothing. I'm using iTunes 11.0.5. Please help - my ATV is useless to me and I want it to work again!

Yes, I'm using the same port on my MacBook that I use to connect and charge my iPad. Also, I can see the blinking light on my ATV box, indicating there is power running to it. I disconnected everything, restarted my laptop today and still can't see it in my Devices list in iTunes.

Can you use Time Capsule as a print server for printers connected via Ethernet or wirelessly?

Can you use Time Capsule as a print server for printers connected via Ethernet or wirelessly?
I know that it works marvelous for printers connected via USB, but I'd like to know if you can use it as a more general print server.

No, you can't, but what do you expect to gain by doing so?
The main advantage of the print server is to provide multi-user network access to a printer that typically only supports a single connection. Since, by definition, your printer already has a network connection and can be used by multiple users.

Synchronize PCMCIA-CAN/2 and USB-DAQPAD-6015

Hi,
I would like to know if is it possible to synchronize data from a PCMCIA-CAN/2 and a USB-DAQPAD-6015 like using two PCMCIA cards with RTSI bus.
Tx for your answers.

Hi christophe14,
it's no problem to synchronize a Series 2 PCMCIA-CAN/2 card and a USB-DAQPAD-6015. However, you might want to take a look at this this KnowledgeBase article.
Similar to using a PCMCIA-CAN and a DAQcard, you would need to use the PCMCIA-CAN Synchronization Cable to connect the PCMCIA-CAN card to the 68-pin connector of the USB-DAQPAD.
-B2k

How can I transfer photos from LG phone to mac notebook. Phone appears in iPhoto when connected via USB but selection for download shows 0 photos

How can I transfer photos from LG phone to mac notebook. Phone appears in iPhoto when connected via USB but selection for download shows 0 photos

Just open your LG volume up likes its an external HD and drag all photos onto a folder in your macbook Air.

Can I use my iPhone or iPad as a web cam for my PC via the USB connection?

I've seen quite a few Apps for doing this wireless, most of which a very poorly executed OR don't work at all. I'm just wondering why it hasn't been more popular to do this via the USB connectivity.

Thanks Lawrence but the point is, I already own the $600 dollar device (given as a gift) and secondly because to purchase a web cam that has the same quality as the iPhone is actually just a bit more than $10 and I'm not really desirous to spend anymore money based on my budget. Any ideas of whether or not it can actually be done via USB OR do you have experience with an actual App that works via wireless to a PC? Thanks again...

TS2771 Ipods no longer connect via USB after using a USB 3.0 for the first time

After trying to connect my Ipod Nano (2nd gen) and Ipod touch to my new computer that has USB 3.0 they both will no longer connect to anything via USB (ipod docks). Is this problem fixable? They still play music via the heaphones.

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
- Try on another computer to help determine if computer or iPod problem

Iphone 4S updated to iOS 5.0.1 last nite no longer visible in iTunes for wireless sync. check box is viewable as checked when connected via usb. anyone else having this problem and been able to sort? Thanks.

Hi all. Update my iphone 4S via usb last night. Since then the iphone is not visible in itunes for wireless syncing. The sync wirelessly box is checked and is viewable as checked when phone connected via usb. Anyone else have this problem and been able to sort? Thanks. Doug

Hi all. Update my iphone 4S via usb last night. Since then the iphone is not visible in itunes for wireless syncing. The sync wirelessly box is checked and is viewable as checked when phone connected via usb. Anyone else have this problem and been able to sort? Thanks. Doug

My Epson XP - 400 will not print wirelessly or via USB. The documents just sits in the print queue while the computer is "searching for the printer". I set up the printer on the computer and it is connected to the wireless network.

I'm unable to print wirelessly or connected via USB with my Epson XP-400. The computer continues to say it's searching for the printer even though the printer is set up on the computer, the printer is connected to the wireless network and the USB is plugged into the computer.

Try resetting your Mac's printing system as shown here:
http://support.apple.com/kb/PH14141

After setting up iCloud for my iPhone and iPad, syncing the calendars to my desktop PC, via USB and iTunes, doesn't seem to work. What;'s going on?

after setting up iCloud for my iPhone and iPad, syncing the calendars to my desktop PC, via USB and iTunes, doesn't seem to work. What's going on?

Regarding the USB, see if zapping the PRAM helps.
Regarding your storage space check out the following:
HD Space Checkers:
Disk Inventory X (FREE)
WhatSize (SHAREWARE)
OmniDiskSweeper (FREE)
GrandPerspective (FREE - donation)
Mac Performance Guide
Slimming your hard drive
===============
Quick fix How To Quickly Free Up Hard Drive Space on Mac OS
http://www.youtube.com/watch?v=fO-mlLApEuk

Recharging my iPod (3rd gen.) on my 2010 iMac goes extremely slowly (via usb port at the back). This is mainly because recharging stops when my mac goes to sleep. I just can't believe that Apple doesn't have a sollution for this, but I haven't found itth

Recharging my iPod shuffle (3rd gen.) on my 2009 iMac (OS 10.5.8) goes extremely slowly (via usb port at the back). This is mainly because recharging stops when my mac goes to sleep. I just can't believe that Apple doesn't have a sollution for this, but I haven't found it yet... What's the most efficient way of recharging?

Purchase a wall charger for it instead.
B-rock

Why is debugging an AIR for Android on device via USB so awful?

I've used Flash 8, Flash Pro CS4, CS5, CS5.5, and now CS6 and I have to say when it comes to debugging it is absolutely the worst environment I've ever worked in. Over the years the number of times I've successfully debugged an application can be counted on one hand. Really, its that bad. Flash will crash or stop responding. I place a breakpoint in the code and Flash will either: A) Ignore it, B) "Breakpoint not set; No executable code at line ###" C) Crash and burn. D) breakpoint turns on but can never be turned off.
Its infuriating and maddening. After this much time why can't Adobe make the debugger work?
Frankly, because of this I have to write ALOT of trace statements into my code.
Has Adobe just given up on the debugger in Flash Pro? As a developer should I be trying to convince my company to switch over to Flash Builder?
For example, right now I'm trying to debug an AIR for Android 3.4.0.2540 via USB on a Motorola Droid 2. I can publish and run in debug mode and see all my trace statements just fine. But I know the instant I need to try to set a breakpoint I'm doomed. Or if my code gets in a race condition like right now. The breakpoints in the new code I added were ignored (see B above) and I can find no options in the Debug menu to break into my app and observe what code it is currently executing. My only option is to end the debug session.
Can anyone comment on debugging in Flash Builder vs. Flash Pro? Is it any better?
Can anyone suggest a solid development environement with debugging that supports Actionscript 3 or can compile it to some other language or object code that would allow me to reliably debug code?
I'm sorry for venting like this. I like Actionscript 3 and I even like Flash Pro until it comes to debugging. But at this point I really need to consider other options so I can get some work done.

Hi Chris,
I also have an HTC Legend, and I'm trying to make some tutorials about publishing from Flash Builder to Android.
I've notice this also, and I must say, it's a complete deception that AIR cannot support this phone, and certainly it seems that upgrading to the Android 2.2 was a bad option, since I defenitly was able to make a simple flash game, and some other exeperiments, and got them to work with AIR when this phone had Android 2.1
If it runs on Android 2.1, maybe it was a an upgrade that make AIR incompatible with this device on Android 2.2. Is there any way of running it, maybe forcing to install a AIR version that works.
I was starting to program on Flash Builder, and experimenting on my Legend, but now I stumbled on this.
Thanks,
Leonel

Can I use iphone in BMW via usb interface for phone call and ipod functions

Can I use iphone in BMW via usb interface for phone call and ipod functions

Why don't you check the manual for your car or ask your dealer?

I'm installing a printer on a MacBook Air via USB connected DVD drive. The computer asks for my password. I don't hink we ever had one. Is there a default password ("admin"

I'm installing a printer on a MacBook Air using an external DVD drive via USB. The computer is asking for my password to authorize changes to the system. I don't htink I ever put one on the computer and "admin" and "password" don't work. Is there a default password? Or a way to change a password that has been forgotten, wothout resetting the computer and wiping everything out? Thanks.

Many thanks. As it happens, I wen to the local Apple Store today for an appointment with a "genius". She helped me reset the password. And as I look at the screens on the page that you connected me to, they're the same as the genius used. So your suggesstion was right on the money, and now I'm all set. Thanks again.

RTX vs ETS for DAQpad 6015 via USB

Similar Messages

Maybe you are looking for