Rückmeldeaktivität (Betriebsratanhörung)

Hallo Zusammen,
ich hätte eine Frage bezüglich der Rückmeldeaktivitäten im E-Recruiting.
Ich habe im IMG unter E-Recruiting die Rückmeldeaktivität "Betriebsratanhörung" angelegt und das Customizing durchgeführt.
Wenn ich als nächstes diese Aktivität einem Bewerber der in meinem Portal hinterlegt ist anhängen möchte, dann habe ich das Problem, dass ich die Aktivität nicht auswählen kann bzw. ist sie im Portal selbst nicht ersichtlich.
Jede Aktivität die ich bisher angelegt habe funktioniert reibungslos, lediglich die Rückmeldeaktivitäten sind nicht auswählbar. Also ist nicht nur die Betriebsratanhörung betroffen sondern alle meine Rückmeldeaktivitäten, ich vermute das sich da ein Fehler meinerseits eingeschlichen hat.
Hat von Euch jemand eine Idee was ich falsch gemacht habe oder was bei Rückmeldeaktivitäten zusätzlich gepflegt werden muss?
Wie gesagt, alle anderen Aktivitäten kann ich dem Kandidaten ganz normal anhängen.
Danke im Voraus
Gruß
Fabian

Similar Messages

How to vary coefficients in F(x,y) box of Runge-kutta, for each time I run.

In Runge Kutta, we are given a F(x,y) array of stings to write right side of equation. But my problem is I have coefficients that I want to vary, and thus have just one control to change value in each equation. How would F(x,y) box know the value of these coefficients?
These are the equations
dC(3) = 1/vg*(W*Koh - Ku_oh*C(1)*C(3) - Ks_oh*C(2)*C(3) - Koh_oh*C(3)^2);
dC(1) = 1/vg*(-Ku_oh*C(1)*C(3));
dC(2) = 1/vg*(A1*Ku_oh*C(1)*C(3) - Ks_oh*C(2)*C(3) - (Ds/r^2)*(C(2) - C(6)/Hs));
dC(4) = 1/vg*(Ko3*W - (Do3/r^2)*(C(4) - C(5)/Ho3) - Ko3_o3*C(4)^2);
dC(5) = 1/vw*((Do3/r^2)*(C(4) - C(5)/Ho3) - Ksl_o3l*C(
6)*C(5) - Ko3l_o3l*C(5)^2);
dC(6) = 1/vw*((Ds/r^2)*(C(2) - C(6)/Hs) - A2*Ksl_o3l*C(6)*C(5));
Where Ks', Ds', Hs' and As' have constant value for each run. So how can i have centralized control on these coefficients, and still use runge kutta.
Attachments:
Corona.vi ‏61 KB
function_dC.doc ‏27 KB

Here are the beginning to the edits. It is enough to get the idea. You should extend the coding to include all the variables. Care should be taken with the variable names so that you are searching for a variable named V it does not replace a variable named VM to get [stuff]M .
Attachments:
Corona[2].vi ‏91 KB

Runge Kutta input syntax error

Hello,
I have a problem with string input of right-sides of differenital equations in "ODE Runge Kutta 4th order.vi"
I have a system of 7 partial differential equations of 1st order and, of course, with 7 unknowns.
And I don't know where to find the rules for writing equations in the string form, tride to find it in Help, but all I got were the .vi examples, but they don't cover all my operators.
So if anyone can help with telling me where to find this.
Or, even better, if anyone can help me with explaining problem with the .vi in the attachment,it is one part of code within "ODE Runge Kutta 4th order.vi" for checking the right-side of differential equations input, and with the equations I have to solve and with names of the variables in the string indicator.
Thank you in advance!
Stay well,
Toni Dropulic
Attachments:
Equation_Right-side_Error_Check.vi ‏35 KB

Actually, just to clarify, the decimal point depends on your computer's and LabVIEW configuration. If you change the operating system to be decimal, LabVIEW will start using decimal point and your program will not work anymore. There is an Option that allows you to avoid system changes, but you would have to change all to decimal points. If you guarantee that your system will be always coma, that would not be a problem.
Also, in the Full Development System of LabVIEW 8 there is a new function called "LabVIEW 8.0\vi.lib\gmath\ode.llb\ODE Solver.vi" that you can develop the right-hand side of the equations as a VI instead of formula node. This could be attractive for some users (I personally prefer graphical programming instead of equations since it is easy to debug). In addition, this VI allow you to choose which solver as fixed step size (RK1,2,3 or 4) or variable step size (RK 23, RK 45, BDF, etc), Time Step, Minimum and Maximum Timestep, Initial and Final Time, and so on. So, if you can change the solver parameters without changing VIs.
Barp - Control and Simulation Group - LabVIEW R&D - National Instruments

Since updating the software on my iPhone 3gs it has developed the so called "white screen of death". The phone has not been dropped or damaged in anyway, the problem only developed after software upgrade. Rung apple and they were less than helpful

since updating my iphone 3gs software it has developed the so called "white screen of death" this happened immediately after software install. It has never been dropped or damaged. I have tried the solution which seems to pop up most of holding down the power button and the home button for 10 seconds but this hasnt helped at all. Tried ringing apple, who were less than helpful and disinterested as the phone is out of warranty. I am hoping there is a solution which doesnt mean shelling out for a new phone! any ideas?

Basics from the manual are restart, reset, restore.
Try all of these.
If these fail, then:
iOS: Unable to update or restore

Ever since I installed Lion my internet connection comes and goes, has anyone else had the same experience. have rung Apple Care and they have reset my connection but it is still happening

ever since I installed Lion my internet connection comes and goes....have reported this to Apple Care who have helped me reset my connection but it is still happening...cant believe it is a fault of the ISP as my Iphone does not have this problem, nor does my PC laptop...is this a fault in the new system?

Thanks so much but none of that helped. It was driving me crazy because it would back up another external drive. I just changed the name of the drive from iPhoto/iTunes Library to Media Libraries and IT WORKED!! I guess for some reason it didn't like the drive being called iPhoto or iTunes ???? I don't understand but I have tried so many solutions and exchanging things out but the name change did it????!!!
Thank you for your help and replying to this. Guess I made my own issue!

Error Runging the Transaction iview using SSO logon ticket

Hi I am getting the follwoing error in log file. when i am running the Transaction iview using SAP Loggon ticket.
#1.5 #005056A33F2000840000000500000600000456BC1060683F#1221265635404#com.sap.security.core.umap.imp.UserMappingDataImp#sap.com/irj#com.sap.security.core.umap.imp.UserMappingDataImp.getAuthenticationTicket()#Guest#0##n/a##28a92320812111ddb972005056a33f20#Thread[UWL Pooled Thread:2,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error#1#/System/Security/Usermanagement#Java###The attribute "" of the backend system with alias "" has the invalid value "".
Cannot generate an SAP authentication assertion ticket for user and the specified backend system.
Please adjust the value of the system attribute. Supported values are "" and "".#6#AuthenticationTicketType#"KPMGVM005_ALIAS"##"Stokkeland, Pauline" (unique ID: "USER.PRIVATE_DATASOURCE.un:P00024384")#SAP Logon Ticket#SAP Assertion Ticket#
I have imported the .der file of the portal in to the SAP ECC sytem.using STRUSTSSO2
Created the profile parameters using rz10 trnsaction.
login/create_sso2_ticket
login/accept_sso2_ticket
restarted the ECC system.
Created the system object using the follwoing parameters
WAS
Connector
Usermanagement
Under usermanagement
Authentication Ticket Type - SAP Logon TicketSAP
Logon Method -SAPLOGONTICKET
User Mapping Fields :<not selected>
User Mapping Type    :<not selected>
when i test the sytem object under connection test:showing the following error.
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
But WAS, ITS, Connector are successfull. but above message is showing.
what could be the problem.
When i run one transaction iview with this system it is showing following error.
com.sap.portal.appintegrator.sap.Transaction::Transaction/WebGuiSSOITS640Layer
Parameter Dump
$DebugAction
$TimeStamp 1221268987126
ALLOW_BROWSER Yes
Alias
ApplicationParameter
ApplicationVariants GuiType
AuthScheme default
Authentication ******
AutoStart false
CachingLevel
ClassName com.sapportals.portal.appintegrator.layer.SingleSignOnLayer
ClientWindowID
CodeLink com.sap.portal.appintegrator.sap.Transaction
CommandField YTIME
CurrentWindowId WID1221260007272
CustomerExit.ParameterProvider
DR.TargetIDPropertyName TCode
DebugMode false
DynamicParameter
DynproFields
ExecutionLocation KPMGVM005_ALIAS
ExportParameters Authentication, LogonUser, RequestMethod
FederationAlias
ForcedRequestLanguage
ForwardParameters
ForwardParameters.Always sap-config-mode
ForwardParameters.Excluded
ForwardParameters.Forbidden ClientWindowID, Command, DebugSet, DynamicParameter, Embedded, InitialNodeFirstLevel, SerAttrKeyString, SerKeyString, SerPropString, SessionKeysAvailable, iview_id, iview_mode, windowId, sap-pp-producerid, sap-pp-consumerBaseURL, sap-pp-returnToConsumer, login_submit, j_user, j_password, j_authscheme, uidPasswordLogon, MappedUser, MappedPassword
GUSID
GuiType WebGui
GuiType.default WebGui
ITSVersion 640
JREPluginDownloadLocation
JREPluginMimeType application/x-java-applet;version=1.4.1_02
JavaGuiCodeBase
JavaGuiTraceFile
JavaGuiTraceKey
LAF
LoadingCacheKey <Portal.Version><LAF.Theme>
LogonMethod SAPLOGONTICKET
MandatoryParameters System
NavMode 1
NavigationTarget navurl://21635c17e11df05c58e1c07deaf5bed1
NextLayer Transaction/WebGuiESIDLayer
OkCode
OkCodeField
OptionalParameters
ParameterTemplate <ApplicationParameter[PROCESS_RECURSIVE]>;<ForwardParameters[QUERYSTRING]>;<DynamicParameter[PROCESS_RECURSIVE]>;
Portal
ProducerLocation Remote
REFRESH_CONTENT -1
ReuseWinguiConnection false
RoundtripURL
SSO2Template
SessionManagementVersion
SupportedUserAgents (MSIE, >=5.5, *) (Netscape, *, ) (Mozilla,,*)
SupportsUnicodeCodePages false
System KPMGVM005_ALIAS
System.type lookup:com.sapportals.portal.appintegrator.lookup.SystemLookup
TCode YTIME
Technique Standard
TopLayer Transaction/DragAndRelateLayer
Transactions_Require_SSF RRMX,RRMXP
URL
UnsupportedUserAgents
UseFrog true
UseSPO1 false
UserMappingTemplate sap-user=<MappedUser>&sap-password=<MappedPassword>
ValidityPeriod -1
Wizard.ApplicationVariantPane.Description
Wizard.ApplicationVariantPane.Title
Wizard.MandatoryParameters System, TCode, GuiType
Wizard.OptionalParameters ApplicationParameter, UseFrog, Technique
Wizard.ParameterPane.Description
Wizard.ParameterPane.Title
X509Template
com.sap.application_integration.ConfigurationServiceID Transaction_Configuration
com.sap.portal.ComponentType com.sapportals.portal.iview
com.sap.portal.activityreport.MonitorHits true
com.sap.portal.admin.propertyeditor.categoryName
com.sap.portal.iview.AccessibilitySupport
com.sap.portal.iview.Availability VISIBLE
com.sap.portal.iview.DisableChildrenDYN
com.sap.portal.iview.DisableChildrenRL
com.sap.portal.iview.DisableChildrenTC
com.sap.portal.iview.DragAndRelate false
com.sap.portal.iview.ExpansionMode Open
com.sap.portal.iview.HasContentPadding true
com.sap.portal.iview.Height 80
com.sap.portal.iview.HeightScale PIXELS
com.sap.portal.iview.HeightType FIXED
com.sap.portal.iview.HelpURL
com.sap.portal.iview.IsTemplate false
com.sap.portal.iview.MainObject
com.sap.portal.iview.MaxAutoHeight 1000
com.sap.portal.iview.MinAutoHeight 0
com.sap.portal.iview.SMiViewURL com.sap.portal.epsolman.EPSolman
com.sap.portal.iview.ShowDetails true
com.sap.portal.iview.ShowExpand true
com.sap.portal.iview.ShowHelp false
com.sap.portal.iview.ShowMinimize true
com.sap.portal.iview.ShowPersonalize true
com.sap.portal.iview.ShowRefresh false
com.sap.portal.iview.ShowRemove true
com.sap.portal.iview.ShowSMiView false
com.sap.portal.iview.ShowTitle true
com.sap.portal.iview.ShowTray true
com.sap.portal.iview.TitleURL
com.sap.portal.iview.TrayType PLAIN
com.sap.portal.iview.Width 400
com.sap.portal.iview.WidthScale PIXELS
com.sap.portal.iview.WidthType FIXED
com.sap.portal.iview.family
com.sap.portal.navigation.DragRelate 0
com.sap.portal.navigation.ExtWindowHeight 710
com.sap.portal.navigation.ExtWindowWidth 1014
com.sap.portal.navigation.Invisible false
com.sap.portal.navigation.JScript
com.sap.portal.navigation.MergeId
com.sap.portal.navigation.MergePriority 100.0
com.sap.portal.navigation.Mergible true
com.sap.portal.navigation.NavigationHierarchyMetadata Cacheable
com.sap.portal.navigation.Priority 100.0
com.sap.portal.navigation.QuickLink
com.sap.portal.navigation.ShowAddToFavorites true
com.sap.portal.navigation.ShowType 1
com.sap.portal.navigation.WindowName
com.sap.portal.navigation.view
com.sap.portal.pcd.gl.Collection IP_PTL_INITIAL_CONTENT
com.sap.portal.pcd.gl.CreatedAt Sat Sep 22 11:32:17 EDT 2007
com.sap.portal.pcd.gl.CreatedBy Administrator
com.sap.portal.pcd.gl.DeltaLinkState -1
com.sap.portal.pcd.gl.Domain EP
com.sap.portal.pcd.gl.LastChangedAt Fri Sep 12 19:24:19 EDT 2008
com.sap.portal.pcd.gl.LastChangedBy ksingh
com.sap.portal.pcd.gl.ObjectClass com.sapportals.portal.iview
com.sap.portal.pcd.gl.OriginalCountry
com.sap.portal.pcd.gl.OriginalLanguage en
com.sap.portal.pcd.gl.Responsible Administrator
com.sap.portal.pcd.gl.TransportDependencies pcd:com.sap.portal.system/archives/com.sap.portal.appintegrator.sap.par
com.sap.portal.pcd.role.EntryPoint false
com.sap.portal.pcm.Description VRB_com.sap.portal.pcm.Description
com.sap.portal.pcm.Title myTime
com.sap.portal.pcm.admin.Capabilities com.sap.portal.capability.delete,com.sap.portal.capability.link,com.sap.portal.capability.copy,com.sap.portal.capability.edit,com.sap.portal.capability.cut,com.sap.portal.capability.transportable,com.sap.portal.capability.launch,com.sap.portal.capability.editpermissions
com.sap.portal.pcm.admin.UseDefaultCapabilities true
com.sap.portal.private.iview.PropertiesUrl pcd:com.sap.portal.system/applications/com.sap.portal.appintegrator.sap/components/Transaction
com.sap.portal.reserved.iview.ButtonsURL
com.sap.portal.reserved.iview.EditorURL pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.pcmEditor
com.sap.portal.reserved.iview.IconName
com.sap.portal.reserved.iview.IsolationMode URL
com.sap.portal.reserved.iview.NavPanelStatus Automatic
com.sap.portal.reserved.iview.ParamList *
com.sap.portal.reserved.iview.WizardURL com.sap.portal.appintegrator.iViewWizard
com.sap.portal.workDistributionTopic
com.sapportals.portal.navigation.FolderEntry false
com.sapportals.portal.navigation.Pictogram
com.sapportals.portal.navigation.WinFeatures resizable=yes,toolbar=no,menubar=no
propertyIdMapping
com.sap.portal.appintegrator.sap.Transaction::Transaction/WebGuiSSOITS640Layer
MandatoryParameters
System   SAP_LocalSystem KPMGSBBW_alis KPMGVM005_ALIAS SAP_BW SAP_CRM SAP_ECC SAP_RPM SAP_WEBDYNPRO_CRM_ALIAS TestECC_Alias Test_CRM_Alias WebEx XBICLNT100 XCRCLNT100 XECCLNT100
Is it required to add ECC certificate to Portal sytem?
we have created the same user id in both the sytems.
Please let me know what could be the error.
Regards

Vijay,
Please follow these steps and lemme know what you observe.
Go to system administration->support->sap application-> under test and configuration tools choose sap transaction
under the mandatory fields choose the system that you have created, choose a tcode (se16) and choose sap gui for windows and click go.
If you are able to logon to your ecc system, your sso works!
P.S Make sure the user name with which you are testing this, exists in the backend as well.
Good luck
Cheers,
Sandeep Tudumu

Charged twice rung loads not sorted and more billi...

hi there im fairly new to this only about a month now but my first bill was taking from my bank earlier than i thought so was returned so rang next day and paid over phone then a few days later taking out of bank again!!! i have rang a number of times now and im getting no where so you have been paid twice needs sorting, then 2 days later today receive another bill for 44 pound?? i sighned up to the more access package which it clearly states around 25 pound for the first 3 months so how do you get 44? even with line rental it would only be around 36 what?? please this needs sorting you have double charged me and now paying more than what was agreed please can this be sorted on here as the last person i rang was quite rude in my opion maybe 25 pound wasnt alot to her but to us in the present climate is the difference in having central heating on or not(we have 2 babies) as this is the reason we left sky to save money we no longer have!!!!!!

Hi Nadine2009,
Thanks for posting. It sounds like you've possibly been billed for usage charges but I can check this for you. Drop me an email with your account details and a link to this page and I'll take a look.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

How can i contact useless iTunes to get back previous purchases that they won 't give me back because somebody accessed my account and downloaded some product without my permission. I have sent severeal emails rung apple but nobody will return my emails.

how can i contact itunes to get back my previous products i have purchased. I have emailed them several times but they won 't return my emails.

iTunes support is online only. E-mail them again. Realize they may not necessarily respond immediately.
Of course if you had your purchases backed up on a hard drive you wouldn't need to contact them at all and they could be back on your computer in a matter of minutes.

Bridge CS5: Metadaten-Erklärung

Hallo zusammen,
ich habe ein Foto gemacht und mir die Metadaten in Bridge angesehen. Dabei verstehe ich einen Wert nicht.
Mein Objektiv verfügt über einen Blendenbereich von 3,5 bis 5,6 (Screenshot Grün).
Unter 'Max. Blendenwert' finde ich den Eintrag 4,6 (Screenshot Rot 1) - der ist OK.
Im Kopf der Metadaten finde ich einen Blendenwert mit 6,3 (Screenshot Rot 2)?! Dieser ist aber nicht möglich. Was wird an dieser Stelle konkret für ein Wert angegeben?
Vielen Dank im Voraus. Schöne Grüße
nono

VIelleicht noch ein paar ergänzende Erklärungen:
Die Werte sind immer Kehrwerte 1/f, deshalb ist 6,3<4,6
Die Werte bei Objektiv sind die maximalen Blendenwerte, die das Objektiv liefern kann. Bei 18mm Brennweite ist es 1/3,5, bei 135mm ist es 1/5,6.
Der maximale Blendenwert ist der, den das Objektiv bei der gewählten Brennweite erreichen kann, dieser Wert liegt hier zwischen 3,5 > 4,6 > 5,6
Da aber beim Fotografieren abgeblendet wurde, beträgt der IST-Blendenwert nur noch 1/6,3.
Allso alles liegt im Bereich des Möglichen und ist auch logisch.
Vielleicht solltest Du Dich etwas mit den Einstellungen Deiner Camera beschäftigen, da das die Basis für gelungene Fotos ist. Auch die Anschaffung eines besseren Objektivs würde bessere BIlder ergeben.
Weshalb fotografierst Du in JPG? Gibt Deie Camera kein Raw her?

Screen black out but can still be rung

Im in a location that has the most basic of network, when i am here my phone seems to play up. it does not register that there is an incoming call despite it ringing on the other end, and today the screen totally blacked out. anyone else's doing the same?

Read here:
http://www.whatsapp.com/faq/en/iphone/20888066

I received an email on my iPad yesterday from FedEx I rung FedEx to find out about this so called parcel that they had tried to deliver, FedEx informed me that it was a virus hoax

I have forwarded the email onto FedEx abuse department but stupidly I had already clicked on the link on my iPad to try. & open the invoice to take to the post office obviously it didn't work but now I'm worried could it have released some kind of virus or Trojan or the like & infected my iPad ( I'm not a tetchy kinda person so please don't confuse me thanks for ur help in advance :)

That e-mail may have contained one of two things. First would be Windows malware. That won't work on your iPad at all, so no worries.
The other thing it could contain is a link to a web site. If you clicked that, you could end up on some site that is not a FedEx site, but is made to look like a FedEx site, that tries to collect personal information (probably telling you it needs something like the credit card number you used to send the package in order to track it). As long as you did not click on any such link and then proceed to enter the requested information, you're fine.

Treiber programmierung unter Linux

Ich soll für zwei NI Karten je einen Treiber unter Linux schreiben. Es handelt sich um folgende Karten 1. NI4351 und 2. NI6014. In den Handbüchen finde ich aber nicht genügend Informationen. Ich benötige noch die Registersätze um die Karten zu konfigurieren und auszulesen. Ich habe auch auf ihrer Internetseite keine dieser Informationen gefunden. Können sie mir diese Informationen mitteilen oder sagen wo ich diese bekommen kann.
Danke
Stefan

Es gibt mitlerweile eine fertigen Linux-Treiber (weitere Unterstützung in Arbeit!)
http://digital.ni.com/softlib.nsf/websearch/930D8687AD03A02C86256F8C00823BDB?opendocument&node=132070_US
Oder ansonsten bringt dich wohl folgendes Schlagwort weiter: Registerlevel Programmierung
http://digital.ni.com/manuals.nsf/websearch/5978CE4A83119E50862566FA0075F424?OpenDocument&node=132100_US
Gruß und viel Erfolg

Itunes Störung

´Wenn ich mit meinem Ipad versuche etwas zu kaufen, kommt immer folgende Meldung: Kauf kann nicht abgeschlossen werden und verbindung zu itunes store nicht möglich. Hab jetzt schon eine neue Version runtergeladen aber nichts funktioniert. Kann mir bitte jemand helfen???????

You will need to contact support and have your account checked
https://expresslane.apple.com/GetproductgroupList.action

Idiotensichere Erklärung f. PSE-4

Hallo,
ich habe ein Foto mit starkem Magentastich. Besonders störend ist das bei den Hautpartien der abgebildeten Kinder.
Mein Versuch, mit Hilfe von "Farbstich entfernen" einen angenehmen Hautton zu erhalten, scheiterte. Auch "Farbe f. Hautton anpassen" brachte nicht viel, weil nun das ganze Bild leicht gebräunt wird.
Kann mir jemand erklären (vielleicht Schritt für Schritt), wie ich mit mit Farbton/Sättingung Farben gezielt verändern kann?
Vielleicht gibt es im Netz bereits eine entspr. Erläuterung. Über einen Hinweis auf diese Quelle würde ich mich sehr freuen.
Besten Dank schon mal
Joachim Becker

Hallo Herr Becker,
am einfachsten im Editor Menü Überarbeiten => Farbe anpassen => Farbvariationen aussuchen. Das Dialogfeld ist selbsterklärend, eventuell noch mit der Tiefen/Mitten/Lichter-Option unten links probieren.
Oder professionell mit der oben erwähnten Tonwertkorrektur (einfach mal "Strg" und "L" gleichzeitig drücken), dann die
schwarze Pipette auswählen und auf eine schwarze Stelle im Bild klicken. Sie werden staunen...
Grüße
Matthias
www.wertvolleswissen.de

My Iphone 4 does not come with a SOFTWARE UPDATE option.

My partner bought my iphone 4 version 4.2 about two years ago from a well known store. He got himself one at the same time but i cannot update mine because it does not come with an option in settings, general that allows me to update it. All of my apps are useless as they need at least iSO5 to run. I cannot check my bank accounts or anything. I have rung and spoke to apple many of times and followed all the steps to try and update. As this is not my fault and the iphone had not been loaded with the correct software there should be something APPLE could do free of charge!!!! I really need help as i cannot afford a replacement or want one. I just dont know what to do anymore!!

Hi there wishheartgirl,
You may find the information in the article below helpful.
iOS 4: Updating your device to iOS 5 or later
http://support.apple.com/kb/HT4972
-Griff W.

Rückmeldeaktivität (Betriebsratanhörung)

Similar Messages

Maybe you are looking for