Rule bug on new portal
Found a bug in the rules on the new portal. I created a notification for when the system "Remains Disarmed" and rule it created does the opposite! It sent a notification when the system was armed at that time. Sure enough, when I look at the rule on the old site it is set up wrong. This is crazy! New site: Old site (Box 2 should have Armed selected!):
I believe I've resolved the "bug". I had forgotten to run updates on CS5, so I was running an old version. After updating to 5.0.2. All is fine.
Edit: Spoke too soon. Bug is still there. Adobe thinks it is related to a "video software" update for my computer:
"iMac 2.7 GHz, Intel Core i5"
AMD Radeon HD 6770M:
Chipset Model: AMD Radeon HD 6770M
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x6740
Revision ID: 0x0000
ROM Revision: 113-C0170F-175
EFI Driver Version: 01.00.560
I've run all the official system updates.
Similar Messages
-
Using URL Alias in "main rule" for a new portal desktop.
Hi
I am having a scenario :
I am having two different business functionality. For accessing them separately i have to create to different portal desktops. Each one will have there own iviews and roles.
BUT
They can have similar user ids.
I.e. same user can access both the deskops based on option selected by him.
Supposed Implementation which i am thinking :
i will create a html page with 2 buttons :
1st button : Application 1
2nd button : Application 2
I will map these buttons/Links to following URL.
Application 1 : irj/poral/application1
Application 2 : irj/poral/application2
On clicking either of these buttons/Links user will get a login screen for SAPNETWEAVER PORTAL.
After login which desktop to be displayed will be decided using following MASTER RULE :
Now i will create a master rule with "URL ALIAS" in IF condition.
My Master rule will look like this :
IF URLAlias = irj/poral/application1 THEN desktop = Application1
IF URLAlias = irj/poral/application2 THEN desktop = Application2
Now I am having 2 questions in mind :
Is this possible ?
How to create URL Alias for a desktop ?? (Or do i need to create a URL alias for desktop !!)
I cant try it until and unless i am sure !!
Please comment on my scenario....
Or tell me if there are some other options.........!!Saurabh,
yes this should work, you have to create the aliases application1 & application2 in the web.xml (see http://help.sap.com/saphelp_nw70ehp1/helpdata/de/48/1d5d0171364269e10000000a421937/frameset.htm)
I think, the initial page with the buttons shouldn't be located in the portal, because then the users would be already logged on (but you can place it on the java-stack at the plain http anyway)
but keep in mind, that you have to create an alias in web.xml & a master rule for each alias you want to have.
kr, achim -
Bug in preview portal doesn't display database list in back up section
There seems to be a bug in the website back up option in the new portal. Even if you have connection strings defined it says:
"You don't have any databases defined in the connection strings for this website"
Unless I'm doing something wrong?Hi sir,
Do your try it on Azure manage portal (https://manage.windowsazure.com )? Azure preview portal currently is preview version and no support approach. So you can confirm this issue on manage portal. If it always
has this error, please feel free to let me know.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
New Portal Theme not showing up in list
Hello fellow experts,
I'm using EP 7 sp10...I've created a new portal theme, it shows up on the Portal Display page, under my Themes, however it does not show up in the drop down list (Content admin/Portal Content/portal users/standard portal users/every user core role) as an option for a portal theme...
Please advise!
Sincerely,Hi Scott,
Please very these steps,
Themes:
System Administration
-->
Portal Display
-->
Theme Editor
-->
Choose a Theme
-->
Make Changes
If Any
--> Save It
-->
Desktop and
Display Rules
-->
Portal Content
--->
Portal Users
<--
Standard Portal
Users
<--
Copy [Default Frame
Work Page & Desktop]
<--
Paste it In a New Folder
Rename the Desktop
<--
1).Open The Renamed Desktop
2). Open Folder Themes (sys) and R.C
3).Add theme to DESKTOP.
4) Save it.
<--
Open ->portal Admin -> SuperADmin
<--
Open -> Master Role Collection
<--
Select a Role/user/group from Master Role Collection
<--
R.c on Renamed Desktop and add Portal Desktop To Expression".
<--
Open Renamed Dektop,Select the theme,
<--
Hit the Button "Set Default" (save)
<--
Logoff and Logon the Portal Page.
Regards,
Ramganesan K. -
How to add new Portal Theme to Default Portal Desktop
I created a new Portal Theme and now I want to add it to the default portal desktop. Here are the steps I am following:
1. System Administration-> Portal Display -> Desktops and Display Rules
2. Open the default portal deskop under Portal Content->Portal Users->Standard Portal Users->Default Portal Desktop. Right-click and select Open->Object
3. My new Portal Theme does not appear in the list of available portal themes to choose for the default.
Please tell me what I have to do so that the portal theme I created appears in the list.
Thanks.
RyanHi,
You can check the actual users desktop by checking the Portal Display Rules:
http://help.sap.com/saphelp_nw2004s/helpdata/en/4b/29cf122f414721964269e1b675d62c/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/cf65869fb64552be09e46516dd8062/frameset.htm
Also check this:
How to assign a Portal Display Theme to a user
Regards,
Praveen Gudapati -
How do i assign new portal desktop to the specific user or group?
Hi all
I created new portal desktop, and i want to assign it to the specific user or group.
Can anybody help me regarding this.
Help appreciated
Thx
PRadeepHi Pradeep.,
1. add a new 'IF' rule.
2. Edit it in the edit section (above the 'IF's part) to 'user' (in the dropdownlistbox) = <userid> (free text).
3. Press 'Apply'.
4. Edit the 'Then' section of the new IF to show the new portal desktop. You can add the full desktop's id by right clicking on it in the 'browse content' section if the screen (where you opened the Display Rule from) and choosing 'add portal desktop to expression'.
5. Press 'Apply'.
6. Move your 'IF' up. Display rules are evaluated from top to bottom until the first one that applies.
Hope that helps,
Yoav. -
Minor Bug in Azure Portal Preview
Hello,
When I create rule for database access, I receive "Firewall rule name must be unique" error if I write IP address before rule name.Hi Cha0s,
Thanks for posting here.
I tried to created the SQL db firewall rules using the management portal it worked fine by following these steps mentioned in the link.
http://msdn.microsoft.com/en-us/library/jj553530.aspx
Server-Level Firewall Rules
Server-level firewall rules can be created and managed through the Microsoft Azure Management Portal, Transact-SQL, Azure PowerShell, or REST API.
Manage Server-Level Firewall Rules through Management Portal
From the Management Portal, click SQL Databases. All databases and their corresponding servers are listed here.
Click Servers at the top of the page.
Click the arrow beside the server for which you want to manage firewall rules.
Click Configure at the top of the page.
To add the current computer, click Add to the Allowed IP Addresses.
To add additional IP addresses, type in the Rule Name,
Start IP Address, and End IP Address.
To modify an existing rule, click any of the fields in the rule and modify.
To delete an existing rule, hover over the rule until the X appears at the end of the row. Click
X to remove the rule.
Click Save at the bottom of the page to save the changes.
Note: Unique does not mean new name to you while setting up the firewall rules, but it should be a new name provided where your database is located in the specified location(for eg. North Europe, East US datacenters.)
Girish Prajwal -
Portal 7: Creating a new portal site based on one of the samples
Hi guys,
I followed this article (
http://blogs.sun.com/jimfaut/entry/portal_7_creating_a_new ) to set up a new portal site like Enterprise sample
But when I log in the new site with new account , it always says "Login Unsucessful" .But If I use the accounts of old Enterprise Sample site such as : mary, chris, ed , the login is successful .
It seems the new site use the login page of the old site .
I don't know why . May you teach me to fix this strange bug ?
Best Regards,
Il2fsomuch
Edited by: milf on Mar 6, 2008 6:03 PMI know this is an old post but I have added to Jim Fauts article how to do this, see below:
Seeing that alot of people are facing the same problem regarding new user being unable to authenticate against the new Portal, I did a bit of digging up and managed to get it to work. See the steps I followed below, but first follow Jim's example above then after follow the example below:
After configuring the roles and loading display profile change the following settings, so that the new user's you create can authenticate.
I did the following to get my new users to authenticate:
On Solaris I opened the following file: /var/opt/SUNWportal/portals/csonline/desktop/csonline/Login/display.template
I changed all occurrences of org=EnterpriseSample to my new organization o=fiction
I also changed the Organization display profile document, replaced every occurrence of o=EnterpriseSample with the name of my organization fiction, in this case I replaced all values that are o=EnterpriseSample,dc=test,dc=co,dc=za
With o=fiction,dc=test,dc=co,dc=za
After configuration you might get a module denied error Authentication Module Denied
Depending on which module you are using, in my case I am using LDAP so I also changed all occurrences of Membership to LDAP inside the display.template file.
After the above changes restart your web container container for the changes to take place and Bobs your uncle.
Thats it. Its alive !!!
Hope this helps -
How to open NEW PORTAL PAGE from current portal page ?
I'm very confuse with my problem.
I have 2 portal page.
portal page I has 2 portlet : portlet A & portlet C.
portal page II has 2 portlet : portlet B & portlet C.
Now my customer want : start with portal page I, when i submit portlet A, program will open portal page II.
I don't know the way to call new portal page from current portal page. Help me, please.
Thanks.
Edited by: young_hero on Oct 30, 2008 1:12 AMCould you please help me how to call a .html page
from a Pl/Sql procedure or trigger ?
Thanks & Regards
Kalyani KothaKalyani,
Could you explain a little more exactly what you're trying to acheive? I'm not quite sure what it is you're asking for. Are you asking: "how would you/can you open a browser and direct it to a URL with PL/SQL?"
Earl -
Creating a new portal in a new domain - no baseportal template
Using Weblogic Platform 7.0 on Solaris 8, I'm trying to work through the
procedure at http://edocs.bea.com/wlp/docs70/dev/newdom.htm "Creating a
new portal in a new domain."
Step 1 "Creating the new domain" goes fine. I can start the portal
server using WL/user_projects/domainname/startPortal.sh and connect to
its console at http://server:7501/console.
In Step 2 "Create the new portal", I start up ebcc.sh, open the project,
and run the Portal Wizard. I get as far as "Portal Templates". The
portal templates comes up empty; there is no baseportal icon, and I
can't go any further.
What's wrong?!?!
Larry Mulcahy [email protected] [email protected]
http://www.nyx.net/~lmulcahy/ http://www.frii.net/~lmulcahy/
PGP key at http://wwwkeys.pgp.net:11371/pks/lookup?op=get&search=0xE6F89645
"I like Linux, but I don't have any part of my body pierced." Roland LatourMichael -
See this document. It should help you out.
http://edocs.bea.com/platform/docs81/confgwiz/startcw.html#1049231
Regards,
Kunal
"Michael Meyer" <[email protected]> wrote:
hi,
I am running BEA Weblogic Portal 8.1 on a linux machine without any grafical
user interface. On Windows I was using the 'Configuration Wizard' to
create
a new domain. Can someone please tell me, how I can create a new domain
without an grafical user interface? Are there any command line tools?
Michael -
Error deploying new portal logon page
Hi Gurus,
I'm getting an error deploying my new portal logon page. I've made teh necessary changes to the portal.logon.par.bak file. I've rename it and made the necessary changes in config tool. i've created a new autoscheme_test.xml file and have assigned it accordingly. After restarting the portal, i'm getting the error message below trying to launch the portal :-
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
The exception was logged. Inform your system administrator..
See the details for the exception ID in the log file
Any ideas? Are there any other setting that i need to do aside from teh autosceme file. thanksHi Johan,
There are two lib files which you need to paste while you import the file in the NWDS.Just check for the steps through this weblog
the jar files name are
com.sap.portal.runtime.logon_api.par
umelogonbase.jar
(when you unzip you can find the files at PORTAL-INFlib)
Modifying The Logon Par(or customising the Logon Screen)
Thanks
Pankaj -
Creation of new Portal Apps!!portal.wf not found !!!
Hi ,
In EBCC I am creating a new portal web application in the existing Portal
Application. I am assigning default portal webflow to my new Portal.
After synchronization , if I access the portal by its context root it
says, portal.wf not found..
What is the significance of portal-project directory ?
regards
vedant.We found the problem,
We had to add a numeric and /or a special charachter in the password -
Create new portal-user with webservice
Hi,
I'm trying to develop a ejb-webservice which is creating a new Portal-User.
The webservice is working so far, I made methods like getDisplayName() which is returning the display name to a logonId and so on. All this is working. I'm using the component sap.security.api.sda for this.
Problem: User-creation is not working. I think the problem might be, that a webservice is not authorized to create users? Or putting it in another way: Is it possible that a webservice is "logging in" at the portal, or sohehow authorizing itself?
Thanks and regards
Jan HempelHi Detlev,
thanks for Your answer.
It seems like that the problem was caused by using array-parameters in the webservice-method?!
Strange, but after removing the array-parameter from the method it worked! Before the webservice never returned anything, not an error or anything else.
Well, strange enough, but I can live with that.
regards
Jan -
New Portal User options are disabled when trying to create a new User
Hi All,
I am trying to create a new portal user profile using the administrator login. While doing that, I am getting all the options ( used to create the new user ) as disabled. Can anybody let me know the reason & solution of such a problem.
or
Anyone can provide me the document on how to create the new profile on portal. Thanks.
Best Regards,
Chander Kararia
Edited by: Chander Kararia on Jan 15, 2009 7:26 AMHi Chander,
I just want to know if you are able to modify the attributes of an existing user. If not then you have been assigned the User Admin role (read only). Please check that. If yes then revert.
Regards.
Rajat -
Bug in oracle portal: problem in pl/sql item type
I created a pl/sql item type... based on a stored proc... whenever I make a change to the store proc I have to readd the item based on this item type since the result on the item type is not updated is this some bug in oracle portal
I created a pl/sql item type... based on a stored proc... whenever I make a change to the store proc I have to readd the item based on this item type since the result on the item type is not updated is this some bug in oracle portal
Maybe you are looking for
-
Adobe Cloud - Only Dreamweaver does not launch
I just subscribed for the trial version of Adobe Cloud and installed DW, PS and AI. All works well only DW does not start up. The icon appears and bounces a few times and then disappears without opening. Any idea how to solve this? On a Mac. Thanks!
-
How do I publish an existing HTML page?
Hello, This might sound a bit basic...possibly because I am not that smart... I have an NT file system - with in it there is an HTML page with icons and other html pages that are linked (relative links). There are other .html pages and images needed
-
Create current date variable at universe level
Hi Everyone I have created report regarding to daily car sales. However there is records registered for further months, 2015 December for instance. Actually they are error records, but I can't delete them since data transfer is realizing automatic
-
Solaris 10 zone config for one application
I have a Solaris 10 x86 server with 48GB of memory and 8 CPUs (although I believe hyperthreading is turned on because prsinfo shows 16 CPUs). The server is dedicated to one big application which spawns many processes/threads. Performance is extremely
-
Classification needs to be editable in locked status
Hi, We have Document stats 'RL' which has locked status 'S'. So when a document comes to this state no data or fields can be editable.If we change the configurations and remove 'S' from 'Rl' status we have all the fields open and editable. In Chang