Rule cannot delete

Hi
How to find the Rule used in Validation?
I deleted all the Step and Exit and rule condition.
but i cannot delete the rule FI_RULEXX.
When i try to delete it says below one.
I selected one and continued but not solved.
Application area                       No. of usages
RS Rule Processor for Substitutions    3
RV Rule Processor for Validations      1
Deletion not possible if this rule is used elsewhere
Message no. GB133
Regards
Chandra
Edited by: princeck on Sep 20, 2011 4:56 AM

Hi,
check SAPNET note 842318. At the end of point I it is explained that
"If you want to delete a validation/substitution, and do not want to do this in each system individually, proceed as described in Note 840981."
So follow SAPNET note 840981.
Best regards, Christian

Similar Messages

  • Cannot delete information from profile.

    I want to delete the information and profile picture I have on a skype profile. I cannot do either. When I try to delete my personal information and save it, skype asks me to enter my password again and then gives me an error.
    I've read that I cannot delete my profile. That's stupid. Please respond. I'd like my information deleted.

    Hi,
    Please clarify: do you mean to clear information appearing in the profile section of your Skype software, such as "Edit your Profile," or do you mean to delete your account?
    To edit the information which appears in your profile:
    https://support.skype.com/en/faq/FA3571/how-do-i-add-or-change-my-profile-picture-in-skype-for-windo...
    https://support.skype.com/en/faq/FA390/who-can-see-the-information-i-add-to-my-profile-in-skype-for-...
    Regarding deleting an account:
    'Can I delete my Skype account?'
    To ensure no one else can ever use the particular Skype account name you chose, Skype does not permit accounts to be deleted.  Once you have removed all of the information appearing in your profile, any saved payment methods, and cancelled subscriptions, the account is simply abandoned.
    Kind regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • ERROR MESSAGE AMT : CANNOT DELETE TOKEN AFTER IT WAS ASSIGNED TO A ROLE

    We are working on the setup in our sandbox environment and we have noticed that we are unable to delete tokens and remove the protection on BO's.
    the following message appears : "CANNOT DELETE TOKEN AFTER IT WAS ASSIGNED TO A ROLE"
    There is no Token assigned to any role anymore and we have also removed all rules and so on, Still it remains impossioble to remove the token on a protected BO or to remove the protection of a BO.
    Thanks for your help

    Hi Wim,
    Ive replied to your support message, requesting a remote connection so I can
    investigate further.
    Regards,
    Gervase

  • Cannot Delete Bonjour Created Printers On Win 7 PC

    I have thoroughly deleted Apple's "Bonjour For Windows" application from my Windows 7 Home Premium PC because it simply would not work. It would not allow me to access or use my Canon MP530 printer which uses a USB connection to our desktop iMac. I tried to delete the "printers" created by Bonjour prior to uninstalling the software. That did not work. Now I cannot delete the printers after the software is thoroughly gone either.
    Can anyone tell me how I can get rid of these Bonjour-created printers from my Devices and Printers container? I suspect they are interfering with my ability to access and use the printer using a strictly Windows 7 configuration / setup (Which is NOT easy to establish. Contrary to Microsoft advertising, working through a network setup like we have is unclear, the printer is not discovered or discoverable, and the network administrator I'm supposed to check with is ME.).
    Other Factors Which May Have A Bearing:
    1. The iMac and Win 7 PC are connected to the Internet and each other via a Siemens Speedstream Gigaset SE567 router. The iMac and PC are connected to the router via ethernet. The router also provides wireless access to a Windows XP laptop and a Macbook Pro.
    2. No, it is not possible to directly connect the printer to the router or PC. It must remain connected to the iMac (family preferences and politics rule here).
    3. Bonjour worked very well for us to enable printing from the PC through the router then the iMac (providing the wife had not turned it off or to sleep) when the PC was running Vista. Bonjour printing under Win 7 beta and RC was flaky and intermittent. I also could not delete Bonjour created printers under Win 7 beta or RC. I could only create new ones to try out different configuration options.
    4. Windows 7 was a clean install. The version of Bonjour attempted with Win 7 is the latest (1.0.6) I could find and freshly downloaded and installed.
    5. Other commentators found on PC forums are now warning that Bonjour is not compatible with Windows 7. This is not too surprising as all of the Bonjour related help available on this Apple site assumes the user is running an Airport router. Which we are not.

    Update: I made many attempts to create a working printer following Microsoft's (and Microsoft supportive blogger's) instructions for adding a printer under Windows 7. I tried to create both various local printers and network printers. While each attempt did create a printer in "Control Panel > All Control Panel Items > Devices and Printers" none of them worked. Either the print job would vanish in thin air or I would get an error message of the obscure kind. And every time I followed up on the error message by allowing Microsoft to diagnose and fix the problem I would always end up receiving the direction to consult my administrator. The only good thing that came from these efforts was that these malfunctioning printer setups, unlike the Bonjour-created ones, would delete themselves when I told them too.
    One of the things I did not mention before is that my home PC (HP Media Center [m8120n]) is set up to offer dual booting. If I do nothing for about 40 seconds after I turn it on it boots up as a Windows 7 PC. Or I can choose to have it boot up as a Linux PC running Ubuntu 9.10.
    So guess what happens when I tell the Linux PC it to print a page originally created on the Win 7 side in Microsoft Word but loaded into OpenOffice under Ubuntu? Or a web page loaded into Firefox? It prints! Beautifully and quickly! From the PC, through the router, then the iMac and out the Canon MP530 printer.
    This told me that port UDP 5353 was not being blocked by my internal router and the iMac was not raising any internal security blocks against print jobs coming from the PC under Ubuntu. Examining the settings under Ubuntu I confirmed the printer was identified as "mp530" and it was printing to my network's internal IP address xxx.xxx.254.3:631.
    I decided to boot up as a Windows 7 PC and try Bonjour once again. This time a more thorough investigation of the Windows firewall confirmed that (after re-installation) Bonjour was identified as a recognized application allowed access.
    But none of the printer setups previously created by Bonjour worked. Nor could I delete them. New ones I tried to establish would not allow me to specify they print to internal IP address xxx.xxx.254.3:631. (One created by Bonjour did report it was set to internal IP address xxx.xxx.254.3:631\printers\mp530. But that one would not work either. Trying to eliminate the "\printers\mp530" portion of the setting generated a "you can't do that" error message.)
    I finally gained some success when I decided to try non-Canon drivers offered by Bonjour. HP drivers also would not work. The setting "Generic" and "MS Publisher Color Printer" does. At least for now.
    Does this mean Bonjour successfully works with Windows 7? Not by my standards. More work on both of those needs to be done. Particularly when it appears CUPS works where Bonjour or Windows 7 print services do not.
    Oh, and I'm still stuck with five non-working Bonjour-created printers I cannot delete from my Windows 7 "Control Panel > All Control Panel Items > Devices and Printers".

  • Cannot delete communication structure

    Hi Gurus!
    I am having problems deleting the communication structures. I installed some Business Contents using the In Dataflow before and afterwards. Consequently, some installed objects are irrelevant to what I need. I am doing some clean-up but I cannot delete the communication structure. It is really odd since I’ve deleted the update rule connected to it, there are no existing transfer structures already still same errors encountered. Then when I try to delete it, it would say that InfoObject ex. 0GN_CAT_SSY of communication structure still being used, but whenever I change the communication structure it is highlighted and cannot be deleted.
    InfoObject 0GN_CAT_SSY of communication structure still being used
        Message no. RSAR741
    Diagnosis
        The deletion of the communication structure for InfoSource
        0PROD_CATEG_TEXT is not possible. InfoObject 0GN_CAT_SSY of the
        communication structure is still being used. This use must be undone
        first.
        Concretely the communication structure of an InfoSource can only be
        deleted if there are no update rules for InfoCubes and no transfer
        structures for source systems for this InfoSource.
    System response
        Activity was finished without database change.
    Procedure
       o   Check the use of your InfoSource 0PROD_CATEG_TEXT in the transfer
           structures. Delete all existing transfer structures of your
           InfoSource 0PROD_CATEG_TEXT.
       o   Check the use of your InfoSource 0PROD_CATEG_TEXT in update rules
           for InfoCubes. Delete all existing update rules for your InfoSource
           0PROD_CATEG_TEXT.
       Afterwards, you can delete your communication structure for InfoSource
       0PROD_CATEG_TEXT.
    Points will be granted whoever can help me. Thank you.

    Hi
    Check , whether your infosource is already assigned to datasource!  At the Infosource tree, Open the Infosource, inside that, check you have any datasource assignment.(It will somthing like the name of the R/3 system).
    Right click on the Infosource, and select the option "Delete the source sytem assignment"
    Then try to delete the communication structure.
    It should work!!
    Thanks
    Vj

  • Why are there 4 x emails that I CANNOT delete?

    Hi lovely people.
    Whilst pruning the emails in my Mail boxes I found 4 x emails that I CANNOT delete. They're grayed/ghosted and no matter what I do to get rid of them (according to the useless Mail Help anyway) those emails have stuck like glue! OMG why?

    Not certain, but this can fix myriad Mail problems...
    Safe Boot from the HD, (holding Shift key down at bootup),  it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move this folder & file to the Desktop.
    Move this Folder to the Desktop...
    /Users/YourUserName/Library/Caches/Mail/
    Move this file to the Desktop...
    /Users/YourUserName/Library/Mail/Envelope Index
    Reboot.
    If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
    /Users/YourUserName/Library/Mail/MessageRules.plist
    /Users/YourUserName/Library/Mail/MessageRules.plist.backup
    Note, in 10.5 & up /Users/YourUserName/Library/Caches/Mail/ may or may not exist.

  • Cannot delete a Mailbox in Mail

    I have a mail box that i set up in an earlier attempt to try and use Mail.
    Now i am back trying Apple Mail again and i wish to delete this old Mail box.
    There are some things very strange happening in regard to this box,
    Firstly, and most annoying i cannot delete it i have tried everything deleting it in the finder as well as via the Delete Mailbox command in Mail and nothing seems to work, well to be honest it appears to work, then some hours or days later...back it comes.
    Also a few of my current mail messages are being put into this old mail box..... i have no rules doing anything like this so what is putting them in here is a mystery and why i cannot get rid of the complete mailbox is driving me nuts.......
    Is it safe to remove the mail prefs? or will that cause utter mayhem and destruction?
    Any help would be appreciated.
    thx
    John

    Hey BSK_AplSprtCm,
    Thanks for the question. I understand that you are experiencing issues with your Mail account. It sounds like you may need to configure which mailbox is your Trash mailbox. To do so, see the following:
    Mail (Mavericks): If messages aren’t stored where expected on the mail server
    http://support.apple.com/kb/PH14957
    If there’s another mailbox on the IMAP server (for example, Sent Items) that contains the messages you’re looking for, you can have Mail use that mailbox to store messages. To do so, select that mailbox (listed under the account’s name and icon) in the Mail sidebar, choose Mailbox > Use This Mailbox For, then choose Drafts, Sent, Trash, or Junk, as applicable. You can select any mailbox on your IMAP server to store draft, sent, deleted, or junk messages. If Mail can’t upload messages to a server mailbox, copies of the messages aren’t saved.
    Thanks,
    Matt M.

  • Cannot Delete member in Planning

    Hi All,
    I am trying to delete a member from one of my custom dimensions in Planning (v11.1.1.3). When I try to delete it in Planning I get the message:-
    "Deletion of member "Total Customer Food Ingredients" failed (member might be referenced elsewhere in application)."
    When I try to perform a 'show usage' on the member there are no forms listed and I have checked business rules but I cannot find any reference to the member. Does anyone have any other ideas as to what other components of planning Ineed to check ?
    Thanks,

    If that is the reason then this is still a known issue at 11.1.2, you can read about it in my Oracle Support - "Bug 7225626: CANNOT DELETE MEMBER IF RECORD IN DRIVER_MEMBER TABLE" and "Unable to Delete Dimension Member [ID 605175.1]"
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Downloaded ios7 to my iphone 4 and now I have songs that I cannot delete and they do not show up on itunes either

    Daughter upgraded to ios 7 and now she has like 4 songs that are not age appropriate on her iphone- I went into itunes and they dont show up...they are like hidden or something- and I cannot delete them from the phone...does anyone know why the upgrade did this and how I can get these songs off her phone- one of them is not even on my phone so I dont understand how in the world it popped onto hers! thanks!

    Hello DavoDavo81,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes Match on iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT5637
    Deleting songs downloaded to your device
    You can delete a song or album from your iPhone, iPad, or iPod touch at any time. Don't worry; it'll still be in the cloud.
    Tap the Music app.
    Tap More > Songs at the bottom.
    Scroll or search for the song you would like to delete from your device.
    Swipe right to left on the song, and then tap Delete.
    Note: You must be in Artists, Songs, or Albums view to delete songs from your device. Deleting from a playlist won't remove a song from your iOS device.
    iTunes Store: How to delete songs from iCloud
    http://support.apple.com/kb/ht4915
    Best of luck,
    Mario

  • Cannot delete file from external hard drive (error code 36) in Finder, but Terminal is ok

    I have a relatively new Macbook Pro Retina 15" and have a Western Digital 1 TB Passport.  I've been using the passport for about a year now without any problems on older Macbooks in my house.  I used to be able to read and write to this drive no problem.  I am using the Paragon NTFS for Mac software in order to read and write to the NTFS drive.  When I navigate through the drive in Finder, if I try to create a new folder, I do not have a problem.  If I try to delete that folder I just created, I get this error:
    The Finder can’t complete the operation because some data in “untitled folder” can’t be read or written.
    (Error code -36)
    The folder has nothing in it whatsoever.  I just created it.  But if I go to Terminal and I run
    rm -rf "untitled folder"
    This works fine.  Why is Terminal acting different than Finder?  This does not happen on my other Macbooks.  Thanks in advance.

    Thanx for such qucik reply!!! The pages were great, it had an answer for my problem, but unfortunately it also involved me dealing with it only on the MacIntosh HD itself, not on mounted external drive I suppose... So it didn't work they say that there is an icon in the left corner indicating locked folder - I don't see any icon on it. It says you can untick the box to unlock the folder - there is no tick to be unticked. Finally, they say that if I don't have permition or rights I cannot delete it. But how do i change permittion which already says that i can read and write in it? So everything appears to be normal only I cannot delete it. there is not even any warnig telling me I don't have enough rights, it just requires the password and after me typing it in it makes the sound of scraping paper but does nothing more. I aslo had some problems with emptying Trash after being seemingly succesful with one file and had got so far to have them appear in the Trash (no clue how this one actully got there though..) I followd the advice and emptied the Trash with Terminal. The Folder is still there but it shows 0 Kb... So far so good BUT: It is still on the external drive, so I obviously only managed to copy it into the Trash!!! Phew, innit a bit too tight to poor owners, this macbook?? I want my rights back!

  • Cannot delete file from disk after emailling that file like attachment

    After i send some file from disk in Mail like attachment i cannot delete that file from disk unless i quit Mail. Like Mail is still using a file. Of course, that mail is in Sent mail, not in outbox.

    This deeper than that. I created another account on the same iMac and it works in Harmony with my other devices and Documents in the cloud. I can only imagine the icloud account is somehow corrupted (I am on my macbook not iMac at the moment). There have been no updates to the Calendar, Contacts or Documents since early January on that account. I have spent 1hr on the phone with support and they were baffled as well. Only thing I can gove as insight to the problem is this, I was on the Mac Mini which was backed up on Time Machine. about 4 or 5 months ago I had to completley restore the Mac Mini becasue of the never ending circle on the load screen. The Backup failed to work it kept loading the issue and 4 or 5 times the circle of death kept coming up I would subsequently wipe the Mini and go further back in the back up until I go a copy that worked.  I then loaded the Time Mache back up into my NEW iMac and wnet from there. It took about a month for this problem I am detailing above to start happening. It maybe a corrupt file loaded from the backup into the new iMac causing this problem. Best answer I can think of on my own???

  • How do I delete and create a new iCloud account on my iPhone, when I cannot delete the old account off my phone!

    I have given my 4s to my wife, she has an iCloud account which uses her work address, she has now left the company and we want to start a new iCloud account, trouble is we cannot delete the old account, we have created a new iCloud account but the iPhone won't let us log into it as it only recognises the old version, we can't access her email anymore to reset the account. Have tried all online help. We restored the phone through iTunes

    Ah thanks Razmee however there is NO option to delete the iCloud account in settings!

  • I moved itunes file to external hard drive and want to move the file on my pc to recycle bin. When I move i get an error message that it cannot delete ituneshelper.dll access is denied. Can I move that file to the recycle bin?

    I am trying to free up space on my pc and moving itunes files to external hard drive. I have followed instructions and believe I have file copied to new drive, but I am having trouble moving file to recycle bin as the instructions say. I am getting the following error message: cannot delete ituneshelper.dll:access denied, make sure disk is not full or write protected and file not in use. I know the file is not in use when trying to move. Any help would be most appreciated. I am on Windows XP.

    Yes. And you should not have moved that folder. Put it back. To move your iTunes library move the folder from User's Music.
    tt2

  • Cannot delete old voice memos from iPhone 4S, ios 6.0.1

    So I noticed today while doing some housecleaning in iTunes and on my iPhone that I had three voice memos in my iphone that didnt get deleted (see picture below).
    So naturally I go and attempt to delete those (because they are just taking up space (I know it's not much, but why have them if I am not using them?). Weird things is, I cannot delete these at all. I highlight all three and hit the delete key, no good. I right click and these are my only options:
    The thing is, I go into my voice memos options in the main iTunes library, nothing is there.
    As well, there is nothing in my iPhone's voice memo library. Also, the voice memo folder in my iTunes folder is empty.
    Any suggestions to try and remove these off the device? I've tried everything I can think of to try and get rid of them.
    Thanks.

    I cannot see your screen shots for some reason, but here's a suggestion:
    Open iTunes on your computer, look at your playlists there.  Go to your "Voice Memos" playlist, delete all its contents, and then sync your iPhone to iTunes.

  • I have orphaned voice memos on my iPhone5 and cannot delete. Listed in iTunes but not on my iPhone's Voice Memo app.

    When I upgraded from my iPhone 4 to iPhone 5, a bunch of voice memos were orphaned.
    What this means is that when I connect my iPhone to iTunes, I see the voice memos.
    They are listed in iTunes under my iPhone directories  "Voice Memo" and in "Music".
    But I cannot delete these.
    When I go to my iPhone, the Voice memo app has changed (ok) and you can see there
    are no voice memos. It appears that they are orphaned from the voice memo app.
    So the voice memos are in my phone somewhere.
    How can I delete them or export them or something with them?
    I can't play them except on iTunes. They don't show up in Music in my iPhone.
    Thanks for your Help
    Steph Beach

    I have the same problem and I still can't delete that stupid song. I downloaded it from Starbucks almost over a year ago!!!

Maybe you are looking for