Rule-generated messages on GWIA - Allow replies

Last year on Friday before the week of July 4, we had a user create a vacation rule and she checked "Reply to External Users." She had listed her work email at her apartment complex. Right after she left work that day, her apartment complex emailed her saying the office would be closed for the week of the 4th. Her rule replied that she was on vacation, the apartment complex replied the office would be closed... and you get the picture. When she got back, she had received 80,000 emails and had sent 80,000 emails. We turned off "Allow replies" on Rule-generate message but now some would like it turned back on. Is there a way to prevent a loop such as this? If so - how? Thanks! Susan

* susan1525,
not really. If you allow replies to the internet and a user creates a silly rule including "subject contains *", this may happen again. If the rule doesn't contain that statement, the reply rule should fire only once per sender until disabled and enabled again.
I allow rule generated messages to the internet to very few users for that reason.
Uwe
Novell Knowledge Partner (NKP)
Please don't send me support related e-mail unless I ask you to do so.

Similar Messages

Prevent rule-generated messages to certain host

Hi,
maybe someone has an good idea for our challenge.
We want to suppress the rule-generated messages from GroupWise but not depending on who sends it, but on who receives it.
Why?
Because we are on the way to enable Vibe Email reception but we don't want the vacation messages to be sent to Vibe (different internal domain, so the mails will pass GWIA and there be routed via route.cfg to the vibe server).
All thought / ideas are appreciated.
Thanks
Mathias

Hi Mathias,
Gosh - using Class of Service never even occurred to me! Pity that it's not flexible enough for your needs
Indeed, enhancement request time: http://www.novell.com/rms
Cheers,

'Allow rule generated messages' on two user account mailbox

Vacation mail activite error can't auto reply to external user.
Anyone saw it before?
Thanks.

Within the GWIA on a GW802 system there are access controls on
Auto-forward and auto-reply and I would suggest that this user is in a
GWIA user profile that is not allowed to auto-reply?
T
On Mon, 19 Dec 2011 03:16:01 GMT, hoiyi88
<[email protected]> wrote:
>
>Vacation mail activite error can't auto reply to external user.
>Anyone saw it before?
>Thanks.

Passing values to the Validation Rule error message

Hello
Help me please
I have the following inquiry :
I am using JDeveloper 10.1.3
I am working on ADF and JSF environment
I have entity object called "Invoices"
and I have the following business rule
" Total purchases from any supplier should not exceed 5000 $ per month "
I am using a validation query to check for the purchases from
specific supplier and validate the Amount.
and I want the message for this validation rule to be :
" Total purchases for this supplier is X , you cannot purchase more than 5000 $ "
where X is variable depending on the supplier ?
I used to do this in Oracle Forms and PL-SQL
I want to generate messages like :
Total purchases for this supplier is 6500 , you cannot purchase more than 5000 $
Total purchases for this supplier is 5250 , you cannot purchase more than 5000 $
???

I think I have to make a custom rule bean
see "Implementing Custom Validation Rules"
http://www.oracle.com/webapps/online-help/jdeveloper/10.1.3/state/content/navId.4/navSetId._/vtAnchor.sm0477/vtTopicFile.bcadfdevguide%7Cbcadveo~htm/

TS2972 apple tv can't sign in to iTunes Store until the network time has been set. this is an Apple generated message. what does it mean? how can i fix it? very very very simple questions but there is no reasonable answer from Apple anywhere on the intern

this is an apple generated message. simple!
what does it mean? so far no one at apple has a clue.
how do i fix it? nothing even begins to address this issue so far. generalities about system setup show a lack of respect for customers. yes my system is plugged in and i have reset and rebooted and rechecked everything. i need help because this a real problem that needs a real solution, not more platitudes.
help please, not more wasting of my time. i have spent an entire afternoon on this already.

this is exactly the kind of response i expected, almost begged support to please not do this to me and yet there it is another meaningless, non helpful, standard template response to restart my apple tv.
this does NOT work which is why i am contacting you. i have tried all suggestions about unplugging and restarting and nothing works.
i live in an apartment and logon to the provided wifi wireless. so i do not have access to a router. however, management says they have talked with their provider and have been assured that the required ports are available.
remember all the jokes about how bad windows was because the solution was always to re boot. funny huh? how is apple any different.
i have been to the local apple care store and they are clueless, too.
should we just end it here and you admit that i will not be getting any support from apple on this one? i got the ipad because my kids were such big fans. it is difficult for me to share their enthusiasm.
at this point i am just curious about how you say you cannot support your own product so i can complete my file on this contact.
thanks...sorry it was you who got this problem..

Message older than allowed MessageAge Error while invoking webservice

Hi,
I have a web service using, implementation is annotated with Wssp1.2-2007-Https-UsernameToken-Plain.xml Policy. I am using a java client based no static Service model to connect to the server.
When I try to connect to the webservice from local machine it works fine.
If I connect from a remote machine below exception is thrown. Even If I set both machines to same time zones and tame same exception is thrown.
( client running on windows, server running on linux)
How can I fix this ? Is there a way to configure MessageAge ? or disable it ?
Exception in thread "main" javax.xml.ws.soap.SOAPFaultException: Security token
failed to validate. weblogic.xml.crypto.wss.SecurityTokenValidateResult@18216e3[
status: false][msg UNT Error:Message older than allowed MessageAge]
at com.sun.xml.ws.fault.SOAP11Fault.getProtocolException(SOAP11Fault.jav
a:196)
at com.sun.xml.ws.fault.SOAPFaultBuilder.createException(SOAPFaultBuilde
r.java:122)
at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.
java:119)
at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.
java:89)
at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:118)
at $Proxy36.getAllRootDisTags(Unknown Source)
at SampleNIClient.main(SampleNIClient.java:75)

Hello -
This is the webservice policy violation from client side.
Mainly the time difference is the route cause.
By default WLS will allow up to 300 sec for client message.
You can change the setting by editing the following...
Go to Security Realms >myrealm >Providers >DefaultIdentityAsserter
Then edit Digest Expiration Time Period value according to your requirement.
Regards,
Justin.

Does video chat on the new Messager on Mac allow screen share or multiple people?

does video chat on the new Messager on Mac allow screen share or multiple people?
i noticed they said that facetime will basically be taking over video calls on the mac and that Messager will take over ichat, but i'm worried they're going to drop all the nice features they had on ichat, like being able to share screens while video chatting with someone. or being able to chat with 2 people at once on a video call.
has anyone downloaded the beta of this yet and tried it out? i'm very curious

Hi,
You can start a Video chat with one Buddy and then chose Screen Share and providing you and the Buddy are using UPnP to open ports it will instantly convert to a Screen Share.
A Screen Share is only 1-1 and is technically an Audio Chat +
The Plus bit is an VNC connection alongside the Audio Chat.
This VNC connection uses a random port - hence the need to use UPnP to open the ports in the router (Or Port Mapping Protocol) in Apple Base Station.
There used to be Add-ons that allowed the Desktop as Video Feed which would have been a sort of Screen Share but none of these have been updated for Lion.
An Example is iUSBCam (ShowMacster was another - My link no longer works)
CamCamX maybe a possibility if it works in Lion (It does say it neess iUSBCam for iChat)
10:56 PM Thursday; February 16, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Problem in rule generator adapter

Hi *,
Here i've got one problem while creating rule generator adapter to validate my customized field, the class referred by the adapter is simple, which requires a minimum length of the field is 6, however, I have no idea about how to tell Xellerate whether the validation is success or not, going through the OIM documents without luck,should i return some specific value that Xellerate understands or throw some kind of exception? please help me!
Thanks,
R.
Thurm

Hi gaurav,
It was a good response from your side.
I have gone through the FAQ but could not able to find anything.
Can you please help me out in this regard ?
Also i am using select query of this kind,
SELECT
SEFVHRC.VHRBRCD,SEFVHRC.VHRCUCD,SEFVHRC.VHRVIN,SEFVHRC.VHRMOCD,SEFVHRC.VHRCHAS,
SEFVHRC.VHRSLOR,SEFVHRC.VHRDIVI,SEFVHRC.VHRMGCD,SEFVHRC.VHRMOCH,SEFVHRC.VHRVHTY,
SEFVHRC.VHRBDTY,SEFVHRC.VHRMFYR,SEFVHRC.VHRMOYR,SEFVHRC.VHRMODS,
SEFVHRC.VHRMDTL,SEFVHRC.VHRCLBR,SEFVHRC.VHRRCID,SEFVHRC.VHRARDT,
SEFVHRC.VHRLUTM,SEFVHRC.VHRLUDT,SEFVHRC.VHRKEYN,SEFVHRC.VHRCTORN,
SEFVHRC.VHRCTIMP,SEFVHRC.VHRPRDT,SEFVHRC.VHRPRDT,SEFVHRC.VHRRCDT,
SEFVHFT.VHFCLCD,SEFVHFT.VHFCAT,SEFVHFT.VHFCADSC,SEFVHFT.VHFKEY,SEFVHFT.VHFTEXT1,
SEFVHFT.VHFTEXT2,SEFVHFT.VHFTEXT3,SEFVHFT.VHFTEXT4
FROM
SAPTESTLIB.SEFVHRC,SAPTESTLIB.SEFVHFT
WHERE
SEFVHRC.VHRVIN = SEFVHFT.VHFVIN AND SEFVHRC.VHRSTTS = ' '
and update query of this kind,
Update SEFVHRC SET VHRSTTS = 'R' WHERE VHRSTTS = ' '
I am using prity big select query. is there any option to optimize it?
Can you please help me out in solving this problem
urs,
Soorya

Rule-Generator Adapter is not being triggered

I have created a rule-generator adapter and assigned it to pre-insert and pre-update of a process form (mapped the return value to process form field) but the system does not trigger the adapter when I add the resource to user. Any ideas why this happens?
Regards,
Kostas

I tried with an entity adapter but the effect is the same (restarted the server). It looks like the system does trigger the pre-insert and pre-update events. Any ideas?

Import rules, error message "Invalid system"

Hi,
When importing rules under Rule Architect - Import rules, error message "VBS is invalid system" . In the configuration tab we have system and System Name defined as VBS, test connection successful.
Why is it giving an error message VBS is invalid system? Please advise.
Thanks,
Sri

Hi,
Is it rule import after taking an export from other system? In that case, make sure destination system name doesn't contain any space in it.
Also, make sure text and auth Objects are uploaded for VBS system before doing rules import.
Regards,
Sabita

BDoc Generated Message Structure

Hi All,
When I am creating a custom BDoc( Messaging), the message structure which system has generated do not have the namespace.
For example I am creating a messaging BDoc ZCOUNTR_MSG and assigning it to package ZCMG.
In the 'BDoc overview tab' under general data, I am entering Related Data Type as ZCRM_COUNTRY_EXT.
After saving, the system has generated a message structure with name ZCOUNTR_MSG000.
The following i have read in the documentation used to create the above example.
Note that a structure for the mBDoc will be generated. The name is built from customer namespace /CRMGEC/ plus short name of the BDoc. In our example the structure has the name /CRMGEC/ZCOUNTR_MESG.
Question:
Can some one please let me know, what should I do in order to happen the system generated message structure should prefix with name space /CRMGEC/
Or
Please let me know is there any impact if the system generated message structure do not have namespace /CRMGEC/
If some one can send me the exact procedure to create a custom messaging BDoc with example, that would help me a lot.
Maximum points will be rewarded if any kind of help/suggestion.
Thanks a lot in Advance.
Nadh R.

Hi Nadh,
Call up Transaction SE16.
Enter table name SMOG_MAPSG and choose 'Table contents (F7)'.
Enter 'Z*' as a selection criterion for TR_SEGDD. Choose 'Execute'.
To select all entries, choose menu option 'Edit -> Select -> Select All F9'. To delete all entries selected, choose menu option 'Table Entry -> Delete'.
Execute the action again in which the error occured. If you have source code that refers to the generated structures, change it to the new names (starting with /CRMGEC/).
For more information please refer SAP Note : 388756
Regards,
Johnny.

Generate Messages in AOL

I want to load messages from one environment to an other environment.
Does an utility exists to load messages automatically without retyping all of them in the new environment? I found something in Generate message treatement (parameter DB_TO_SCRIPT) but it seems to be not supported by Oracle (message that I had in log file) Thanks.

We are having the same dilemma going from 11.5.->11.5.8, though we have it down to about 30-40 hours (still unacceptable.)
yehuda.friedman

Populating a field using rule generator adapter

Hi
How a form field is populated using Rule Generator Adapter. And what we should do if we want the same field do not appear in the form, though it's value should be participate in task(create user update user etc).
Thanks
Kanchan

Check these links
http://download.oracle.com/docs/cd/E10391_01/doc.910/e10366/rules.htm
Prepopulate Adapter and Rule Generator Adapter

Prepopulate Adapter and Rule Generator Adapter

Can anyone tell me the exact difference between Prepopulate adapter and Rule generator adapter? I have read the documentation but both seems to be same.
Please explain me with an example scenario..
Regards
Pavan

Hi,
See if this help you in gaining more understanding.
PrePopulate Adapter: They are mapped with the fields of process form and are used to prepopulate the fields value during the resource provisioning.
RG Adapter: A RG Adapter incoporates business rules to the fields of either OIM user form or user defined form so that these fields can be automatically populated
and saved to the database. You can use the RG & Entity Adapter to construct the userid from the firstname and lastname fields and prepopulate it.
Difference:
While both these adapter can be used to prepopulate values but RG Adapter has one to one mapping with the RG adapter and custom field. An RG Adapter once
attached to a field cannot be attached with another field thus preventing adapter reuse. Beside this, no other type of adapter can be associated with that custom
field.In contrast, the PrePopulate adapter can be reused and attached with multiple fields.
Hope this will help you.
Regards
Sunny Ajmera

Rule generator adapter

hi,
Please explain me whats the use of rule generator adapter where entity adapter and prepopulate adapter does all the functions of a rule generator.
i have gone through the docs but it doesnt explain the difference.
Thanks in advance,
Cat's Paw

You are correct in stating the functionality of the oim adapter types is overlapping. The documentation describes the recommended classification types of the adapters while you can achieve the same functionality by creating some other adapter type in similar fashion.
I would suggest you to use the recommended approach as mentioned in the documentation.

Rule-generated messages on GWIA - Allow replies

Similar Messages

Maybe you are looking for