Rule Generation fails

Hello!
We have an issue. After installation few month ago we uploaded standard files (according to postinstall steps) and now we are trying to load modified action/permission files.
We have a problem with Rule Generation programm. During rule generation job we have got a problem:
"Error while executing the Job:ERROR: Risk: F001 has exceeded the maximum number of rules (46,655) that can be generated for a risk"
According to note #1310365 on our side for F001 is all correct: F001 risk consist of two Functions - GL01 and GL02. GL01 has 168 actions, and GL02 has 56 actions, i.e. total 9408 rules (168*56). We think that it happens because we uploaded files for all systems and groups (for DEV200, PRD400and their group ERP Systems; for PRD420 and its group CUA), in this case 9408 * 5 (number of systems)=47040.
We have tried to upload empty files (action/permission with only one string in each), we hoped that it cleaned all information, and after this we can load SoD again. But it doesn't help...
What can we do?
P.S. [thread |Rule Generation fails - maximum no of rules 46655; has been watched
Regards,
Artem

Artem,
After close study , i think i found some key point.
Per SAP note 1310365, max number of risk allowed per function are
tcodes in function1 X tcodes in func2 X 3
per example in note
Suppose you have a risk (P086) that includes three functions:
MD12 with 21 actions
BR08 with 46 actions
TS22 with 34 actions
This particular risk applies to three different versions of SAP, all running on your environment. In this example, P086 translates to 98,532 distinct rules.
98,532 = 21x46x34x3
also since you had already uploaded standard rule sets........ and when you upload modified files....... it must be containing old tcodes also........ those should be removed.
regards,
Surpreet

Similar Messages

Report generation fails with below error

Hi Friends,
This is an extarct from "ccat /var/opt/SUNWsymon/PRM/log/prm.log"
Report generation fails for individual host but succeeds for all hosts.
prmlog September 13, 2010 12:52:14 PM Thread-287: Begin loading files
prmlog September 13, 2010 12:53:51 PM HandlerThread-0: Got trap: 2
prmlog September 13, 2010 12:53:51 PM HandlerThread-2: Got trap: 2
prmlog September 13, 2010 12:54:51 PM HandlerThread-1: Got trap: 2
prmlog September 13, 2010 12:54:51 PM HandlerThread-2: Got trap: 2
prmlog September 13, 2010 12:56:01 PM HandlerThread-0: Got trap: 2
prmlog September 13, 2010 12:58:51 PM HandlerThread-0: Got trap: 2
prmlog September 13, 2010 12:58:51 PM HandlerThread-2: Got trap: 2
prmlog September 13, 2010 12:59:51 PM HandlerThread-1: Got trap: 2
prmlog September 13, 2010 12:59:51 PM HandlerThread-2: Got trap: 2
prmlog September 13, 2010 1:00:00 PM Parallel:0: Call CrScheduledRequestBroker.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Call CrScheduledRequestBroker.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Call CrScheduledRequestBroker.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Call CrScheduledRequestBroker.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Call CrScheduledRequestBroker.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Database Error occurs!
prmlog September 13, 2010 1:00:00 PM Parallel:0: ERROR: relation "detail_temp_host" does not exist
prmlog September 13, 2010 1:00:00 PM Parallel:0: SchedOP: Exception: scp-2: Report request generation failed.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Call CrScheduledRequestBroker.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Database Error occurs!
prmlog September 13, 2010 1:00:00 PM Parallel:0: ERROR: relation "detail_temp_host" does not exist
prmlog September 13, 2010 1:00:00 PM Parallel:0: SchedOP: Exception: creature-t1000-08: Report request generation failed.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Database Error occurs!
prmlog September 13, 2010 1:00:00 PM Parallel:0: ERROR: relation "detail_temp_host" does not exist
prmlog September 13, 2010 1:00:00 PM Parallel:0: SchedOP: Exception: sdp-1-region2: Report request generation failed.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Database Error occurs!
prmlog September 13, 2010 1:00:00 PM Parallel:0: ERROR: relation "detail_temp_host" does not exist
prmlog September 13, 2010 1:00:00 PM Parallel:0: SchedOP: Exception: psp-1-region2: Report request generation failed.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Database Error occurs!
prmlog September 13, 2010 1:00:00 PM Parallel:0: ERROR: relation "detail_temp_host" does not exist
prmlog September 13, 2010 1:00:00 PM Parallel:0: SchedOP: Exception: shissun1: Report request generation failed.
prmlog September 13, 2010 1:00:05 PM Thread-294: Report successfully posted to web server.
prmlog September 13, 2010 1:01:01 PM HandlerThread-0: Got trap: 2
prmlog September 13, 2010 1:03:54 PM HandlerThread-0: Got trap: 2
In /tmp directory I could see database logs directory (/tmp/SunMCDBLogFiles)
Below is an extarct from "db-start-sql.log"
ERROR: table "summ_temp_events" does not exist
LOG: autovacuum: processing database "postgres"
LOG: autovacuum: processing database "sunmc"
LOG: autovacuum: processing database "postgres"
LOG: autovacuum: processing database "sunmc"
LOG: autovacuum: processing database "postgres"
LOG: autovacuum: processing database "sunmc"
LOG: autovacuum: processing database "postgres"
LOG: autovacuum: processing database "sunmc"
LOG: autovacuum: processing database "postgres"
LOG: autovacuum: processing database "sunmc"
LOG: autovacuum: processing database "postgres"
LOG: autovacuum: processing database "sunmc"
LOG: autovacuum: processing database "postgres"
LOG: autovacuum: processing database "sunmc"
WARNING: there is already a transaction in progress
ERROR: relation "detail_temp_host" does not exist
CONTEXT: SQL statement "INSERT INTO detail_temp_host (host_id) VALUES (21)"
PL/pgSQL function "get_alarm_data_ids" line 203 at execute statement
PL/pgSQL function "sp_get_nonperf_summary_data" line 92 at assignment
WARNING: there is already a transaction in progress
WARNING: there is already a transaction in progress
ERROR: table "summ_temp_events" does not exist
ERROR: relation "detail_temp_host" does not exist
CONTEXT: SQL statement "INSERT INTO detail_temp_host (host_id) VALUES (26)"
PL/pgSQL function "get_alarm_data_ids" line 203 at execute statement
PL/pgSQL function "sp_get_nonperf_summary_data" line 92 at assignment
ERROR: relation "detail_temp_host" does not exist
CONTEXT: SQL statement "INSERT INTO detail_temp_host (host_id) VALUES (25)"
PL/pgSQL function "get_alarm_data_ids" line 203 at execute statement
PL/pgSQL function "sp_get_nonperf_summary_data" line 92 at assignment
WARNING: there is already a transaction in progress
ERROR: table "summ_temp_events" does not exist
WARNING: there is already a transaction in progress
ERROR: table "summ_temp_events" does not exist
ERROR: relation "detail_temp_host" does not exist
CONTEXT: SQL statement "INSERT INTO detail_temp_host (host_id) VALUES (42)"
PL/pgSQL function "get_alarm_data_ids" line 203 at execute statement
PL/pgSQL function "sp_get_nonperf_summary_data" line 92 at assignment
ERROR: relation "detail_temp_host" does not exist
CONTEXT: SQL statement "INSERT INTO detail_temp_host (host_id) VALUES (1)"
PL/pgSQL function "get_alarm_data_ids" line 203 at execute statement
Kindly suggest me.. This SUNMC is doing more than killing.
Thanks
Srini

I just received instructions from the TMG software company to uninstall and install the PDF driver they use. This fixed the problem. Apparently upgrading to v7.01 damages the driver but reinstalling it corrects the problem.
Thanks for the advice.
Mike

Error in Rule Generation

We are configuring RAR 5.3, and so far we successfully uploaded all text files. But when we try to generete the rules for logical systems in a background job, after 45 minutes the following error is shown:
Nov 4, 2008 9:56:02 AM com.virsa.cc.comp.VirsaXSR3_01Interface execute
WARNING: VIRSAXSR3_01: Cannot execute BAPI RoleList
java.lang.NullPointerException
     at com.virsa.cc.common.ModelNodeUtil.copyNodeTreeToModel(ModelNodeUtil.java:42)
     at com.virsa.cc.comp.VirsaXSR3_01Interface.execute(VirsaXSR3_01Interface.java:267)
     at com.virsa.cc.comp.wdp.InternalVirsaXSR3_01Interface.execute(InternalVirsaXSR3_01Interface.java:1341)
     at com.virsa.cc.comp.wdp.InternalVirsaXSR3_01Interface$External.execute(InternalVirsaXSR3_01Interface.java:1376)
     at com.virsa.cc.comp.BackendAccessInterface.executeBAPIModel(BackendAccessInterface.java:3314)
     at com.virsa.cc.comp.BackendAccessInterface.execBAPI(BackendAccessInterface.java:398)
     at com.virsa.cc.comp.BackendAccessInterface.executeBAPI(BackendAccessInterface.java:301)
     at com.virsa.cc.comp.wdp.InternalBackendAccessInterface.executeBAPI(InternalBackendAccessInterface.java:4227)
     at com.virsa.cc.comp.BackendAccessInterface.searchRole(BackendAccessInterface.java:776)
     at com.virsa.cc.comp.wdp.InternalBackendAccessInterface.searchRole(InternalBackendAccessInterface.java:4283)
     at com.virsa.cc.comp.wdp.InternalBackendAccessInterface$External.searchRole(InternalBackendAccessInterface.java:4740)
     at com.virsa.cc.dataextractor.bo.DataExtractorSAP.searchObj(DataExtractorSAP.java:382)
     at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.getObjArray(AnalysisEngine.java:395)
     at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.performActPermAnalysis(AnalysisEngine.java:695)
     at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysisRE(AnalysisEngine.java:2706)
     at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonWS.start(AnalysisDaemonWS.java:78)
     at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:434)
     at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1223)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
     at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:480)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Nov 4, 2008 9:56:02 AM com.virsa.cc.comp.VirsaXSR3_01Interface execute
WARNING: VIRSAXSR3_01: Cannot execute BAPI RoleList
java.lang.NullPointerException
     at com.virsa.cc.common.ModelNodeUtil.copyNodeTreeToModel(ModelNodeUtil.java:42)
     at com.virsa.cc.comp.VirsaXSR3_01Interface.execute(VirsaXSR3_01Interface.java:267)
     at com.virsa.cc.comp.wdp.InternalVirsaXSR3_01Interface.execute(InternalVirsaXSR3_01Interface.java:1341)
     at com.virsa.cc.comp.wdp.InternalVirsaXSR3_01Interface$External.execute(InternalVirsaXSR3_01Interface.java:1376)
     at com.virsa.cc.comp.BackendAccessInterface.executeBAPIModel(BackendAccessInterface.java:3314)
     at com.virsa.cc.comp.BackendAccessInterface.execBAPI(BackendAccessInterface.java:398)
     at com.virsa.cc.comp.BackendAccessInterface.executeBAPI(BackendAccessInterface.java:301)
     at com.virsa.cc.comp.wdp.InternalBackendAccessInterface.executeBAPI(InternalBackendAccessInterface.java:4227)
     at com.virsa.cc.comp.BackendAccessInterface.searchRole(BackendAccessInterface.java:776)
     at com.virsa.cc.comp.wdp.InternalBackendAccessInterface.searchRole(InternalBackendAccessInterface.java:4283)
     at com.virsa.cc.comp.wdp.InternalBackendAccessInterface$External.searchRole(InternalBackendAccessInterface.java:4740)
     at com.virsa.cc.dataextractor.bo.DataExtractorSAP.searchObj(DataExtractorSAP.java:382)
     at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.getObjArray(AnalysisEngine.java:395)
     at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.performActPermAnalysis(AnalysisEngine.java:695)
     at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysisRE(AnalysisEngine.java:2706)
     at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonWS.start(AnalysisDaemonWS.java:78)
     at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:434)
     at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1223)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
     at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:480)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Whe try then to generete the rules in foreground to see what happens and we got a different error:
Error in Rule Generation! Reason:ResourceException in method ConnectionFactoryImpl.getConnection():
com.sap.engine.services.connector.exceptions.BaseResourceException: Cannot get connection for 120 seconds.
Possible reasons:
1) Connections are cached within SystemThread(can be any server service or any code invoked within SystemThread in the SAP J2EE Engine),
2) The pool size of adapter "SAPSR3DB" is not enough according to the current load of the system or
3) The specified time to wait for connection is not enough according to the pool size and current load of the system.
In case 1) the solution is to check for cached connections using the Connector Service list-conns command,
in case 2) to increase the size of the pool and
in case 3) to increase the time to wait for connection property. In case of application thread,
there is an automatic mechanism which detects unclosed connections and unfinished transactions.
Reading the descriptions in both errors, it seems like the RAR application is trying to connect to the back end system during rule generation. Is this correct?
We followed all the recommendations indicated in the post-installation for RAR 5.3.
Any ideas??

Dear Pablo,
Please check if you have changed your Jco pool configuration as below :
JCo pool configuration            Original      Change u2013 as per
                                                                SAP note
Maximum pool size            50     100
Maximium connections     100     1800
Connection timeout ( milli sec )     100     10000
Max waiting time ( milli sec )     30     30000
also check if you have done eisk analysis performance tuning
for :
batch size - 1000,
number of web service threads - 5,
number of background job worker threads - 3,
rfc timeout for web services/background job worker threads ( min) - 1441.
Hope this is useful to you.
Edited by: Yajuvendra Subhash Sonalkar on Nov 7, 2008 9:00 AM

Cisco ISE 1.1.1.268 Giving error (Report Generation failed. Cause: Null)

I have this issue and I would be very thankful if someone has the answer for this. When I am trying to access Operation > Report > Catalog > Posture > Posture Detail Assessment & clicking on any posture session detail icon. I am getting following attached errors.
1. Report Generation failed. Cause: Null
2. Cannot execute the statement.
Does anyone knows how to get rid of this error & to get access of posture detail.
Thanks

The error message means that Active Directory server Reject the authentication attempt
as for some reasons the user account got locked.I guess, You should ask your AD Team to check in the AD
Event Logs why did the user account got locked.
Under Even Viewers, You can find it out
Regards
Minakshi (Do rate the helpful posts)

Receiving Error Message : Cost Of Goods Sold Account Generation Failed

Hi All,
We need some assistance with this issue...for a given item when the Customer RMA order Line is being received into a given organization/sub inventory/locator we are getting this error message in the Receiving Transactions Interface ( RTI ) as mentioned below.
Cost Of Goods Sold Account Generation Failed with error :RVTII-030: Subroutine rvtiicreate() returned error
Cause: Subroutine rvtiicreate() returned an internal error.
We checked for this item in the organization the Cost of Goods Sold Account has been defined in the Costing Tab in the Item-Org Assignment and this GL account is also enabled on the GL side and is Active.
The scenario is like this :
1. Firstly this item is shipped out on an Outbound order line to the customer location and we checked for the valid Sales Order Issue transaction against this item for this order. We checked for its Inventory Distributions as well.. these look to be valid.
It shows : Inventory valuation account is decremented while the Deferred Cogs of Goods Sold account is incremented.
2. Then this item is being entered on Return order line and after booking the order line . It goes to Awaiting Return status. Next the user tries to attempt the Receipt for the Customer RMA order line for this item we are getting the error mentioned below in the RTI tables :
Cost Of Goods Sold Account Generation Failed with error :RVTII-030: Subroutine rvtiicreate() returned error
Cause: Subroutine rvtiicreate() returned an internal error.
Coudl someone please assist us with this issue as this is happening in Production instance ..that would be very helpfull of you..
This is an urgent issue
thanks

Hi,
Standard workflow "OM : Generate Cost of Goods Sold Account" has following steps:
1/ Start generating Code Combination
2/ Get CCID for a line
3/ Copy Values from Code Combination
4/ Validate Code Combination
5/ End generating Code Combination
If I want to modify the segment4, the custom function to set the attribute FND_FLEX_SEGMENT4 need to be inserted just after the step "Copy Values from Code Combination" (NOT just after "Get CCID for a line").
Is it what you have done?
J.

Business Rules login failed

When I try to access to the Business Rules in the EAS Enterprise View (I'm logged as admin), it says
"Business Rules Login Failed"
If I go in Shared Services I can't provision additional roles to the admin user because the role related to Business Rules is not present.
It seems that Business Rules is not correctly configured.
So what I have to do?
Thanks.

Hi,
1. When you login into Shared services, on left hand side ,you see User directories and Application groups.
2. Expand "Application groups" , here do you see Business Rules.
3. You are telling us ,after you have expanded essbase, thats not needed.
Hope this is clear to you
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

Unable to open xsl file in Jdev 10.1.3.4.0.4270 (XSL Map generation failed)

Hi Guys,
I am trying to edit an XSL file using Jdeveloper 10.1.3.4 and it gives me the error "XSL Map generation failed. Please use the source editor to correct the problems and return to the design editor".
In the Mapper Message Log i find these lines.
Line Number:(44) : Error: "xsl:import" XSL Element Currently not Supported
Line Number:(68) : Error: "xsl:apply-templates" XSL Element Currently not Supported
Line Number:(67) : Error: <xsl:template match="/"> and <xsl:template name="..."> are the only permitted <template> elements in the XSL
Any help / pointers is very much appreciated.
Regards,
Vik

Perhaps better late than never...
This is a limitation in JDeveloper that it cannot render an XSL in design/mapper view when it contains these features of XSL. Pretty much 100% of AIA transformations fall into this category.

Generation failed when doing a build in NWeaver studio

Hi experts,
while doing a dc build in my netweaver studio, i got a error. I ve checked all my codes and that there are no syntax error. Somehow there is something preventing the generation process. The log found recorded an error but never gave a hint as what could be the possible error. So i ve no clue what is causing the generation to fail. Please see log captured below. Is there anyway i can find out the cause of this error ?
Thanks a lot !
Rgds,
Daniel
===========================================================================
    [wdgen] [Info]    com.sap.webdynpro.generation.ant.GenerationAntTaskError
     [wdgen]      at com.sap.webdynpro.generation.ant.GenerationAnt.showCheckResult(GenerationAnt.java:157)
     [wdgen]      at com.sap.ide.webdynpro.generation.Generation.check(Generation.java:2047)
     [wdgen]      at com.sap.ide.webdynpro.generation.Generation.generatePersistentComponent(Generation.java:1296)
     [wdgen]      at com.sap.ide.webdynpro.generation.console.GenerationConsole.generate(GenerationConsole.java:175)
     [wdgen]      at com.sap.webdynpro.generation.ant.GenerationAnt.main(GenerationAnt.java:50)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     [wdgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     [wdgen]      at java.lang.reflect.Method.invoke(Method.java:324)
     [wdgen]      at com.sap.webdynpro.generation.ant.WDGenAntTask.execute(WDGenAntTask.java:219)
     [wdgen]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
     [wdgen]      at org.apache.tools.ant.Task.perform(Task.java:364)
     [wdgen]      at org.apache.tools.ant.Target.execute(Target.java:341)
     [wdgen]      at org.apache.tools.ant.Target.performTasks(Target.java:369)
     [wdgen]      at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
     [wdgen]      at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:116)
     [wdgen]      at com.sap.tc.buildplugin.DefaultAntBuildAction.execute(DefaultAntBuildAction.java:59)
     [wdgen]      at com.sap.tc.buildplugin.DefaultPlugin.handleBuildStepSequence(DefaultPlugin.java:214)
     [wdgen]      at com.sap.tc.buildplugin.DefaultPlugin.performBuild(DefaultPlugin.java:186)
     [wdgen]      at com.sap.tc.buildplugin.DefaultPluginV3Delegate$BuildRequestHandler.handle(DefaultPluginV3Delegate.java:66)
     [wdgen]      at com.sap.tc.buildplugin.DefaultPluginV3Delegate.requestV3(DefaultPluginV3Delegate.java:48)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     [wdgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     [wdgen]      at java.lang.reflect.Method.invoke(Method.java:324)
     [wdgen]      at com.sap.tc.buildtool.v2.impl.PluginHandler2.maybeInvoke(PluginHandler2.java:350)
     [wdgen]      at com.sap.tc.buildtool.v2.impl.PluginHandler2.request(PluginHandler2.java:99)
     [wdgen]      at com.sap.tc.buildtool.v2.impl.PluginHandler2.build(PluginHandler2.java:73)
     [wdgen]      at com.sap.tc.buildtool.PluginHandler2Wrapper.execute(PluginHandler2Wrapper.java:59)
     [wdgen]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1750)
     [wdgen]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:6004)
     [wdgen]      at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.buildDCsForDevConfig(BuildAction.java:307)
     [wdgen]      at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.access$200(BuildAction.java:58)
     [wdgen]      at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction$1.run(BuildAction.java:212)
     [wdgen]      at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)
     [wdgen] ERROR: Unknown exception during generation null (com.sap.webdynpro.generation.ant.GenerationAntTaskError)
     [wdgen] ERROR: Generation failed due to errors (26 seconds)
Error: C:\Documents and Settings\pmsdla\.dtc\1\DCs\com.diagonal\appl\sd\workmenu\_comp\gen\default\logs\build.xml:98: [Error]   Generation failed!
     at com.sap.webdynpro.generation.ant.WDGenAntTask.execute(WDGenAntTask.java:254)
     at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
     at org.apache.tools.ant.Task.perform(Task.java:364)
     at org.apache.tools.ant.Target.execute(Target.java:341)
     at org.apache.tools.ant.Target.performTasks(Target.java:369)
     at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
     at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:116)
     at com.sap.tc.buildplugin.DefaultAntBuildAction.execute(DefaultAntBuildAction.java:59)
     at com.sap.tc.buildplugin.DefaultPlugin.handleBuildStepSequence(DefaultPlugin.java:214)
     at com.sap.tc.buildplugin.DefaultPlugin.performBuild(DefaultPlugin.java:186)
     at com.sap.tc.buildplugin.DefaultPluginV3Delegate$BuildRequestHandler.handle(DefaultPluginV3Delegate.java:66)
     at com.sap.tc.buildplugin.DefaultPluginV3Delegate.requestV3(DefaultPluginV3Delegate.java:48)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.tc.buildtool.v2.impl.PluginHandler2.maybeInvoke(PluginHandler2.java:350)
     at com.sap.tc.buildtool.v2.impl.PluginHandler2.request(PluginHandler2.java:99)
     at com.sap.tc.buildtool.v2.impl.PluginHandler2.build(PluginHandler2.java:73)
     at com.sap.tc.buildtool.PluginHandler2Wrapper.execute(PluginHandler2Wrapper.java:59)
     at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1750)
     at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:6004)
     at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.buildDCsForDevConfig(BuildAction.java:307)
     at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.access$200(BuildAction.java:58)
     at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction$1.run(BuildAction.java:212)
     at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)
Ant runtime 38.094 seconds
Ant build finished with ERRORS
[Error]   Generation failed!
Error: Build stopped due to an error: [Error]   Generation failed!
Error: Build stopped due to an error: [Error]   Generation failed!
Build plugin finished at 2009-05-20 10:56:11 GMT+08:00 (SGT)
Total build plugin runtime: 41.438 seconds
Build finished with ERROR
Edited by: Daniel Lam on May 20, 2009 5:31 AM

Hi Rajat,
Thanks a lot. Indeed i found the error in task view.
It is referring to a window in my webdynpro application.
"window has no InterfaceView".
Indeed the interface view is not there and there is no option for me to create the interface view.
So what i did is to delete the window so that i can create a new one and the interface view will thus be generated. But when i tried to delete the window, a null pointer exception window is pop out.
I remember when i created this window the other time, there was an exception.
So the question is how to create the interface view ?
Thanks
Regards,
Daniel

Automatic Settlement rules generation

PS Experts
I need to have automatic settlement rule generation for WBS elements.
I do have all the config (PS & IM) in place and when i release my WBS element then AUC is automatically created and no settlement rules are generated at this point.
But when i create FINAL ASSET, then the settlement rules are generated automatically with final asset as the receiver. When i run my final settlement (CJ88) then the settlement rule is updated with AUC & Final asset.
My question is do i need to have Investment profile to have automatic creation of settlement rules.
What if i don't want to activate IM and still have automatic settlement rule generation?
Edited by: Raj M on Apr 17, 2008 8:49 PM

Hi,
For automtic settlement rule generation folloowing steps need to be followed.
1. Determine Strategy for Settlement Rule
In this there will be settings for settlement rule where we define the recevier cost object after project settlement.
This strategy will be assigned to project profile
2. Generate Settlement
CJB2 transaction need to be run for generation settlement for the WBSE.
Hope this will help you.
Regards,
Rakesh Pradhan

Web Service Proxy Generation failed

Hi @all,
i would like to consume a web service with the adaptive webdynpro model, but the proxy generation fails. Attached you will find the log file of the NWDS:
com.sap.tc.webdynpro.model.webservice.exception.WSModelRuntimeException: Exception on creation of service metadata for WSDL URL 'http://ktkrs3580/Elan2Webservice/elan_service.asmx?WSDL' and service factory configuration '{DynamicProxy.ClassPath=D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.cmi_1.0.0/_cmi_api.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.exception_2.0.0/lib/exception.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/boot.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/iq-lib.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/util.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_lib.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_api.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/tc_sec_wssec_lib.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.runtime_2.0.0/lib/SapDictionaryTypesRuntime.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.services_2.0.0/lib/SapDictionaryTypeServices.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/logging.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/loggingStandard.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/jARM.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.xmltoolkit_2.0.0/lib/sapxmltoolkit.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/activation.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxm-api.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/saaj-api.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxrpc-api.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jnet.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jsse.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/mail.jar;D:/Programme/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.webdynpro.model.webservice_2.0.0/lib/_webdynpro_model_webservice.jar;, DynamicProxy.INetProxy.Bypass=, DynamicProxy.INetProxy.Port=8080, DynamicProxy.Javac.path=C:\j2sdk1.4.2_12, DynamicProxy.TempDir=C:\DOKUME1\branch\LOKALE1\Temp\, DynamicProxy.INetProxy.Host=tknproxy}'
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:414)
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.readOperationsFromWSDL(WSModelInfo.java:372)
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadataInternal(WSModelInfo.java:342)
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadata(WSModelInfo.java:306)
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadata(WSModelInfo.java:316)
at com.sap.ide.webdynpro.modeleditor.wizards.model.creation.PageRenameWS.loadNameSpacesAndModelClasses(PageRenameWS.java:435)
at com.sap.ide.webdynpro.modeleditor.wizards.model.creation.ModelDialog.nextPressed(ModelDialog.java:105)
at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:316)
at org.eclipse.jface.dialogs.Dialog$1.widgetSelected(Dialog.java:423)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
at org.eclipse.jface.window.Window.open(Window.java:563)
at com.sap.ide.webdynpro.modeleditor.ModelEditorCallback.createModel(ModelEditorCallback.java:52)
at com.sap.ide.webdynpro.service.modeleditor.ModelService.createModelWithUI(ModelService.java:70)
at com.sap.ide.webdynpro.service.modeleditor.ServiceWithUI.createModel(ServiceWithUI.java:49)
at com.sap.ide.webdynpro.tsmodel.application.provider.ModelNodeProvider.createUniqueName(ModelNodeProvider.java:55)
at com.tssap.selena.impl.model.elements.EntityImpl.createChildEntityUin(EntityImpl.java:936)
at com.tssap.selena.impl.model.elements.EntityImpl.createChildEntity(EntityImpl.java:502)
at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.runInternal(CreationAction.java:76)
at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.access$000(CreationAction.java:24)
at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction$1.run(CreationAction.java:51)
at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1595)
at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.run(CreationAction.java:57)
at com.sap.ide.webdynpro.projectbrowser.actions.PBCreateModelAction.run(PBCreateModelAction.java:95)
at com.tssap.selena.model.extension.action.SelenaActionCollector$GenericElementActionWrapper.run(SelenaActionCollector.java:224)
at com.tssap.util.ui.menu.MenuFactory$MuSiAction.saveRunAction(MenuFactory.java:1425)
at com.tssap.util.ui.menu.MenuFactory$MuSiAction.run(MenuFactory.java:1407)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction.processInternal(MenuFactory.java:616)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction.access$100(MenuFactory.java:586)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction$BusyProcessWorker.run(MenuFactory.java:716)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction.process(MenuFactory.java:610)
at com.tssap.util.ui.menu.internal.MenuListenerFactory$ProcessAdapter.widgetSelected(MenuListenerFactory.java:172)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.WebserviceClientException: GenericServiceFactory initialization problem. Could not load web service model. See nested exception for details.
at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.generateProxyFiles(DGenericServiceImpl.java:150)
at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.<init>(DGenericServiceImpl.java:50)
at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService(GenericServiceFactory.java:88)
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:412)
... 53 more
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.ProxyGeneratorException: Proxy Generator Error. Proxy generation problem. See nested exception.
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ProxyGenerator.generateProxy(ProxyGenerator.java:283)
at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.generateProxyFiles(DGenericServiceImpl.java:147)
... 56 more
Caused by: java.io.IOException: Compilation fails...
C:\Dokumente und Einstellungen\branch\Lokale Einstellungen\Temp\DGenService1207743399620\types\p1\RelationCIShort.java:161: getIdCI() is already defined in types.p1.RelationCIShort
public java.lang.Integer getIdCI() {
^
C:\Dokumente und Einstellungen\branch\Lokale Einstellungen\Temp\DGenService1207743399620\types\p1\RelationCIShort.java:164: hasIdCI() is already defined in types.p1.RelationCIShort
public boolean hasIdCI() {
^
2 errors
THX!
Regards,
Christian

found the fix discussed on this blog... http://kingsfleet.blogspot.com/2008/07/working-round-xsdchoice-binding-issue.html

Generation failed????????

I am using:Oracle JDeveloper 10g Release 2 (10.1.3) - Developer Preview
I create J2EE web service using "J2EE 1.4(JAX RPC) web service" but have error:"WSDL and mapping file generation failed for the following reason"
details>>
oracle.j2ee.ws.common.tools.api.SeiValidationException
at oracle.j2ee.ws.common.processor.modeler.rmi.RmiModeler.modelPort(RmiModeler.java:581)
at oracle.j2ee.ws.common.processor.modeler.rmi.RmiModeler.buildModel(RmiModeler.java:455)............
any thing wrong???

Is the web service generated from a java class?
Add a SEI interface for the java class to generate a web service. The SEI interface has the same methods as the java class.

SAP GRC RAR Rules Generation Job Error - SP13 application

Hello,
we applied SP 13 on GRC and RAR Rule Generation job is always in "error" status; below I list an example of job log:
INFO: -
Scheduling Job =>237----
Apr 4, 2011 1:36:12 PM com.virsa.cc.xsys.bg.BgJob run
INFO: --- Starting Job ID:237 (RULE_GENERATION) - generate f113
Apr 4, 2011 1:36:12 PM com.virsa.cc.xsys.util.Lock lock
FINEST: Lock:1007
Apr 4, 2011 1:36:12 PM com.virsa.cc.xsys.bg.BgJob setStatus
INFO: Job ID: 237 Status: Running
Apr 4, 2011 1:36:12 PM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
1@@Msg is generate f113 started :threadid: 1
Apr 4, 2011 1:36:12 PM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO: -
Background Job History: job id=237, status=1, message=generate f113 started :threadid: 1
Apr 4, 2011 1:36:12 PM com.virsa.cc.xsys.util.Lock unlock
FINEST: Unlock:1007
Apr 4, 2011 1:36:12 PM com.virsa.cc.xsys.bg.BgJob ruleGeneration
INFO: @@@--- Rule ruleGeneration Started ....237
Apr 4, 2011 1:36:12 PM com.virsa.cc.xsys.bg.BgJob run
WARNING: *** Job Exception: null
java.lang.NullPointerException
     at com.virsa.cc.xsys.bg.BgJob.ruleGeneration(BgJob.java:1245)
     at com.virsa.cc.xsys.bg.BgJob.runJob(BgJob.java:609)
     at com.virsa.cc.xsys.bg.BgJob.run(BgJob.java:363)
     at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.scheduleJob(AnalysisDaemonBgJob.java:375)
     at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.start(AnalysisDaemonBgJob.java:92)
     at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:444)
     at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1236)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
     at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:481)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:333)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Apr 4, 2011 1:36:12 PM com.virsa.cc.xsys.bg.BgJob setStatus
INFO: Job ID: 237 Status: Error
Apr 4, 2011 1:36:12 PM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
2@@Msg is Error while executing the Job:null
Apr 4, 2011 1:36:12 PM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO: -
Background Job History: job id=237, status=2, message=Error while executing the Job:null
Apr 4, 2011 1:36:12 PM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
INFO: -
Complted Job =>237----
Apr 4, 2011 1:36:13 PM com.virsa.cc.xsys.util.Lock lock
WARNING: It is used by the same owner: For current thread retrying to get lock : 1001
Apr 4, 2011 1:36:13 PM com.virsa.cc.xsys.util.Lock lock
FINEST: Lock:1001
Apr 4, 2011 1:36:13 PM com.virsa.cc.xsys.util.Lock unlock
FINEST: Unlock:1001
Is there someone that can help me?
I checked and it seems that "Use NetWeaver Logical Lock" in config tab has to be set to "No"...is it correct for you or have you got other tips?
Thx to all

Hello,
actuallt current values are:
Row CNFGPARAM| CNFGSEQ| CNFGVALUE|
35 250 0 NO
36 251 0 YES
Value for 250 is ok based on your feedback.
Value for 251 is based on SNOTE 1508611, even if SDN forum suggests "0" against the note.
Have you got any tips?

Business rule is failed.

Hi All
we have an issue with business rules.When they run it from planning web, running fine.But when we attached it to form and run it from smartview with option run on save we are getting messegae "Business rule is failed."Not all of RTP parameters are set".
plz advice.

Are some of the variables hidden?
Is the problem like this one :- Business Rules and "run on Save"
Cheers
John
http://john-goodwin.blogspot.com/

Business Rule Login Failed

I am trying to run a Business Rule in EAS. However, when I log in to Essbase and when I clcik the plus in front of the Business Rule, it give a message "Business Rule Login Failed"
Also, when I go to HSS, I do see the item called HP.. under the Business Rule tab. So what could be reason?

It might be worth going through the following article in Oracle Support - "Troubleshooting Hyperion Business Rules Issues [ID 763345.1]"
Cheers
John
http://john-goodwin.blogspot.com/

Error : XSL map generation failed

I am trying to map two XSD and generate the XSL file which will transform from one xml to another.
Source XML
+<root>+
+<Hello>Well</Hello>+
+<World>Thats</World>+
+</root>+
Destination XML
+<root>+
+<property name="Consumer" value="Well"/>+
+<property name="Consumer" value="Thats"/>+
+</root>+
Since the the destination XSD has same element twice, in its XSD it appears only once. So there only one node in the XSL Map tree in the right side of the JDeveloper (version 11.1.1.5.0)
I can only drag lines from either <hello> or <world> from the 1st XSD to the <property> element of the second XSD.
When I changed the XML map's xsl source to match my requirement as follows
     +<xsl:template match="/">+
          +<root>+
          +<ns0:property>+
               +<xsl:attribute name="name">+
                    +<xsl:text disable-output-escaping="no">Consumer</xsl:text>+
               +</xsl:attribute>+
               +<xsl:attribute name="value">+
                    +<xsl:value-of select="/root/Hello"/>+
               +</xsl:attribute>+
          +</ns0:property>+
          +<ns0:property>+
               +<xsl:attribute name="name">+
                    +<xsl:text disable-output-escaping="no">Consumer</xsl:text>+
               +</xsl:attribute>+
               +<xsl:attribute name="value">+
                    +<xsl:value-of select="/root/World"/>+
               +</xsl:attribute>+
          +</ns0:property>+
          +</root>+
     +</xsl:template>+
+</xsl:stylesheet>+
It works when I test the xsl but I can not go back to the design mode, it is showing the following error
Error : XSL map generation failed
Error: This node is already mapped, repeating nodes not supported :
I am not able to map (drag lines) any more due this error. Please suggest how to create repeating nodes in the destination XSD
Edited by: neilghoshidc on May 21, 2012 6:53 PM

The XSL Map error is only in Design mode. Runtime shouldn't generate an error.
Also refer
Notes on the Mapper
http://docs.oracle.com/cd/B31017_01/integrate.1013/b28211/xslt_mpr.htm
When you map duplicate elements in the XSLT Mapper, the style sheet becomes invalid and you cannot work in the Design view. The Log Window shows the following error messages when you map an element with a duplicate name:
Error: This Node is Already Mapped :
+"/ns0:rulebase/for-each/ns0:if/ns0:atom/ns0:rel"+
Error: This Node is Already Mapped :
+"/ns0:rulebase/for-each/ns0:if/ns0:atom/choice_1/ns0:ind"+
Error: This Node is Already Mapped :
+"/ns0:rulebase/for-each/ns0:if/ns0:atom/choice_1/ns0:var"+
The workaround is to give each element a unique name.

Rule Generation fails

Similar Messages

Maybe you are looking for