Rule in pages iOS from metric to imperial?

How can i switch from metric to imperial the rule in Pages please? Thanks.

Menu > Preferences > Rulers Preferences > Ruler Units: Inches
Peter

Similar Messages

Switching Page Setup window from Metric to Imperial

Hi,
Might anyone know how to change the metric measurements (cm) to imperial ones (inch) -seen below the Paper Size dropdown menu- in the Page Setup dialog box of any given program?
I've tried everything I can think of, including switching keyboard layouts and Time Zone setting to make the computer think I live somewhere other than Canada, but nothing will make a US Letter sized paged show as "8.5 in x 11 in".
Thanks!
-Neil
OS 10.4.3

Go to International Preferences in System Preferences and switch to the Formats panel. There is a drop down menu at the bottom called "Measurement Units" - that should do it.
Hope this helps.

Changing metric to imperial in maps

I know how to get to the place where I can switch from metric to imperial, but when I highlight the 'imperial' setting, or click 'change', it doesn't change, but stays on metric. Does anyone else have this. I really like ovi maps, but living in the UK, would prefer to have the units in miles.
Dave

@aldene25
Welcome to the forum!
Do settings in OVI Maps application reconcile with Location/Positioning settings for GPS?
No clues as to what device you are using but if S60 5th Ed. device have you gone to Menu > Applications > Location > Positioning > Notation preferences > Measurement system = Imperial?
For Symbian^3 OS device go to Menu > Settings > Application settings > Positioning > Notation preferences > Measurement system = Imperial
Happy to have helped forum with a Support Ratio = 42.5

Pages 2.0.2 doesn't open Pages documents from ipad

Pages 2.0.2 doesn't open Pages documents from ipad 2. Document succesfully transferred as Pages document to computer, but Pages 2.0,2 wouldn;t open it. Version too old?

Pages 2 is iWork '06, two versions behind what the iOS Pages creates. You need to use Pages '09 which you can purchase from the Mac App Store as a stand-alone application or a retail box of the iWork '09 suite.

How can I transfer "Pages" files from my IPad to my Mac?

How can I transfer "Pages " files from my IPad to my IMac, I cannot use ICloud because I have Mountain Lion installed on the IMac?

Actually, you can use iCloud and the way that you so it is to log into iCloud.com on the Mac (use Safari for best results) click on the Pages icon and then drag the Pages files into the browser window. It works the other way around as well. Log into iCloud.com on the Mac and download the files from Pages (that you created on the iPad) in iCloud onto your Mac. You can click on the file in the documents window and select it to Download by clicking on the Gear icon or right click upon the file and select download.
The files will then sync to the Pages app on the iPad - assuming hat you have use iCloud tuned on in Settings>Pages>Use iCloud>On. I have an iMac running Tiger 10.4.11 that I can still move Pages/Word files back and forth Iike this.
Also, File Sharing with iTunes is a great way to move the files back and forth.
iOS: About File Sharing - Support - Apple
Message was edited by: Demo

How do you transfer Pages files from Mac to ipad?

How do you transfer Pages documents from Mac to Ipad?

If you have iOS 5 on the iPad and enabled iCloud in Pages, you can go on your Mac and go to http://icloud.com, then click iWork, then click the gear icon and upload the document. It should appear on your iPad.
If you have an older OS on the iPad, you will need to plug in to the Mac and launch iTunes. Click on the iPad under DEVICES. Then click on the Apps tab up top. Scroll down until you see a File Sharing section. Click on Pages, then click on the "Add" button.

How to get pages document from mac book to iphone 5 to send in a email

How can I transfer pages document from mac book pro to iphone 5. I want to email documnets from phone.

iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
Another way. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
To delete the pics from your MBP, just drag to Trash and empty Trash.
 Cheers, Tom

MBP Pro doesn't recognize Pages docs from iPad, vice versa

Beacuse I'd like to be able to experience the wonderful seamlessness of the new cloud with Mountain Lion, I downloaded Mountain Lion onto my MacBook Pro, as well as the Pages app (I previously had Pages '09), in addition to downloaded the Pages app for iOS (iPad 2 and iPhone 4S).
I thought that in theory, I could start a document on the iPad/Phone and it woudl appear on the MBP, as well, as vice versa. That has not happened. Specifically, I was taking notes last week on the iPad and when it didn't pop up on my MBP or the Cloud on the MBP, i email the document as Pages document to myslef and thought I could just open it on the MBP then and it'd appear as a new Pages doc there. Well, when i downloaded the Pages doc from the iPad onto the MBP, I got a message saying The open XML file could not be opened because there are problemns with it, and The file is corrupt and cannot be opened. How can it be corrupt? I just created it a few days ago on the iPad? Also, when i follow prompts to open the document, the message box is a Word one? Why is Word then stepping in to try to open it? Shouldn't an Apple app on one machine recognize a document made on an Apple app on another device? I should point out this has happened everytime I've tried to share documents on my mac devices via Pages.
Also, kind of related, when i go to the options of what to do with the file on the iPad, i get the option to use iwork -- but of course there is no iWork anymore. So why hasn't this option beeen updated? Why not just a 'save to cloud' option? And what's this 'send to itunes' option? I selected that for one document and of course that didn't work, either.
Thanks so much.

You do need to turn on iCloud syncing on the iOS devices as it is not on by default. Go to Settings & scroll way down to the apps area & tap on Pages & turn iCloud syncing on. The same applies to your Macs, go to System Preferences > iCloud & check Documents & Data. Of course, you must have a iCloud account.

Why can't I access my iCloud-stored Pages document on my iPhone (Pages iOS)?

I have the latest iOS my 2 phones. I have the current Pages iOS app on each phone. I have several Pages documents on my iPhones (created there, locally). I have my iPhone(s) set up for iCloud access and I have Settings on the phones set for iCloud access to Documents & Data. The phones are connected to the net.
I have (successfully) done a "Save As" of a document from Pages on my Mac to the iCloud. I have confirmed the Save As worked by logging into my iCloud account (via Safari) and viewing the document in Pages (iWork). I even did some edits there in Safari and created a new version of the Pages document there, so now I have 2 Pages documents in my iCloud account.
However.... when I launch Pages on either of my phones I do not find a way to open (or import) either of those documents from my iPhone.
What am I missing? Thanks!

mattrocks wrote:
Is your documents and data on in your iPhones settings?
Also, check the Pages per-app settings in the settings app.
Hope this helps.
Thanks. Yes, the Documents & Data is on. But your second suggestion was spot-on. I got a reply to my re-posted question in another forum area and that pointed me to the Pages setting in the Settings app. It had been switched off. Switching it to "on" has the iCloud-stored documents now appearing in Pages on the phones.

Why can't I access my iCloud-stored Pages document on my iPhones (Pages iOS)?

I have the latest iOS my 2 phones. I have an iCloud account. The phones are connected to the net.
I have the current version of the Pages iOS app on each phone. I have several Pages documents on my iPhones (created there, locally) and I am able to open and edit them just fine. I have my iPhone(s) set up for iCloud access according to the documentation from Apple, and I have Settings on the phones set for iCloud access to Documents & Data.
On my Mac I have successfully done a "Save As" of a document from Pages to the iCloud. I have confirmed that the Save As worked by logging into my iCloud account (via Safari) and viewing the document in Pages (iCloud / iWork). I even did some edits there in Safari and created a new version of the Pages document in the iCloud, so now I have 2 Pages documents in my iCloud account (just in case it was something to do with any issues about the rev. of Mac Pages that created the iCloud version of the document).
However.... when I launch Pages on either of my phones (or my iPad) I do not find a way to open (or import) either of those documents from any of my iOS devices.
What am I missing? Thanks!

gail from maine wrote:
Hi keriah,
When you go to Settings>Pages, do you have the "Use iCloud" option turned on?
Cheers,
GB
That was it! Thanks!!!

Change margins on print preview screen from metric (millimeters) to inches

I need to adjust the margins when printing a page from the web. The print runs off the bottom of the page. When checking in print preview, the margins are in millimeters. Would like to change that to inches (which i am more familiar with). Where can i change the settings from metric to inches.

{ Ctrl + P } then Properties = do you have '''letter''' size paper selected or '''A4''' size? <br />
A4 is a bit longer than Letter size paper.
From what I have seen on my PC's, you get millimeters with metric size paper and fractional measurements with US paper sizes.

New pages made From Template messed up!

Hello,
I have made a template that is not yet finished... I decided
to test it out, but when I make new pages from it, the formatting
is messed up (in any new pages that I create from the template).
This of course is happening prior to uploading to the pages... (I
need to make many different pages from the template but cannot
proceed because of this...)
If I preview the new ‘messed up’ page in Safari
(that is by clicking the Preview button in Dreamweaver itself), it
is almost OK, but the background image does not show up. Could
anyone suggest what I might need to do to get the ‘new’
page to appear fine in Dreamweaver itself.
I am new to Dreamweaver and have just started with it since
moving from GoLive...
Thanks in advance.

> Well, that solved the problem. Changed my hard disk name
from D's 200 to
> just
> D 200. After that I had to reset the site root folder
but now pages made
> from
> the template are correctly formatted...
If it would be considered a bug, then many programs would
have it! As a
general rule of thumb, it's best to avoid any characters in
your
file/pathnames other than letters, numbers, and
hyphens/underscores. That
would eliminate spaces, quotes, ampersands, parentheses, etc.
> One remaining question. In the template, I used
Modify/Page Properties to
> add
> a background to it. When I make a new page from the
template, the
> background
> does not appear. Is that normal or should it appear?
It should appear, so there must be something wrong in the
resulting code.
Can we see it?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Peace Freak" <[email protected]> wrote in
message
news:[email protected]...
> Hello,
>
> Read through both the latest suggestions and decided to
try getting rid of
> the
> single quote first as it was the easiest to do. I am on
a Mac by the
> way...
>
> Well, that solved the problem. Changed my hard disk name
from D's 200 to
> just
> D 200. After that I had to reset the site root folder
but now pages made
> from
> the template are correctly formatted...
>
> Thank you so much for this excellent troubleshooting
experience. I guess
> this
> single quote problem would be considered a bug (surely
single quotes
> should be
> allowed in the names of hard disks???) as I don't ever
remember Apple
> saying
> don't use single quotes when naming a hard disk...
>
> Should I/we report it to Adobe? I would be happy to. I
don't know how
> these
> forums work but it might be an idea to post a
topic/sticky with
> appropriate
> keywords so that others will be made aware of it easily.
>
> One remaining question. In the template, I used
Modify/Page Properties to
> add
> a background to it. When I make a new page from the
template, the
> background
> does not appear. Is that normal or should it appear?
>
> Thanks so much.
>
>

Update iOS from 3.1 to 4.2

i updated iOS from 3.1 to 4.2 after i click at update now..but after complete, the phone restart and now cant read the SIM. so cant unlock!!!

The first thing you need to do is confirm which model of Touch you have.Look at http://support.apple.com/kb/HT1353 which will help you identify your model. look further down that page at http://support.apple.com/kb/HT1353#iPod_touch_2nd_generation and examine the pictures. Notice the difference between a 1st and 2nd generation model.
If your iPod is a 1st generation model, it cannot be upgraaded to anything past iOS 3.1.3.
If it's a 2nd generation model, I think I'm right in saying that to upgrade to iOS 4.2.1 (which is as high as a 2nd gen Touch can go) you need to purchase the update. (I've tried finding a speedcific page about this, but have had no luck at the moment, sorry.)

How can I convert the rulers on the page layout from picas to inches?

How can I convert the rulers on the page layout from picas to inches?
I am creating a print document - the page setup seems to automatically convert from inches back to picas. When I go to the tutorial on creating a document, however, the tutorial shows dimensions in inches. I assume there is some kind of preferences setting but I have not been able to find it.

In the Online Help:
InDesign Help | Rulers and measurement units
From this forum:
CS6 New Document - Units and Increments - Ruler Units Defaulting Back to Picas
InDesign CS5.5 won't respect Units Preference
InDesign Page Margins measured in "P"??? What?
starting a new doc in InDesign
Elsewhere:
http://indesignsecrets.com/change-measurement-systems-on-the-fly.php

I'm trying to print a multiple page document from my ipad using an Airprint printer. Only the first page is printing, Please help?

I'm trying to print a multiple page document from my ipad using an AirPrint printer. Only the first page is printing. Please help. The printer works correctly with my desktop and laptop.

What version of iOS are you using? Some people were having this problem before, and it was fixed when they updated to iOS 5.

Rule in pages iOS from metric to imperial?

Similar Messages

Maybe you are looking for