Rule Modeler Setting in ERMS

Gurus,
Pls guide me how to set the ERMS Policies in Rule modeler. What is the T-Code?
regards
Ravi

Hello Ravi,
Are you doing in for Winclient or Web client?
Necessary steps for setting up ERMS.
Create Organizational Model (PPOCA_CRM)
Maintain Workflow Standard Settings (SWU3)
Create Receiving E-Mail Addresses for ERMS in CRM System
Define Receiving E-Mail Addresses (CRMC_IC_AUIADDR)
Map Receiving Addresses to ERMS Workflow (SO28)
Assign Agents for E-Mail Handling (CRM_ERMS_WF_CUST)
Activate Event Linking (CRM_ERMS_WF_CUST)
Define Outgoing E-Mail Addresses (CRM_ERMS_OUTG_EMAIL)
Define E-Mail Templates for ERMS (CRM_ERMS_MAILTEMPL)
Maintain E-Mail Forms for ERMS (CRM_ERMS_MAILFORMS)
Add IC Manager user ID to role SAP_PCC_ERMS_ADMIN and SAP_PCC_IC_MANAGER (PFCG)
Define Additional ERMS Services (CRMC_ERMS_SM_SRV)
Define Additional Service Manager Profiles (CRMC_ERMS_SM_PROF)
Extend ERMS Repository (CRMC_ERMS_REPOSITORY)
Define Additional E-Mail Profiles (CRMC_IC_EMAIL)
Define Catalogs, Codes, Subject Profiles (various transactions in IMG under CRM -> Basic Functions -> Catalogs, Codes, & Profiles)
Define Additional Categorization Profiles (CRMC_IC_CATPROF)
Define Additional ERMS Reporting Statuses (CRMC_ERMS_STATUS)
Define Additional ERMS Reporting Events (CRMC_ERMS_EVENT)
Delete ERMS reporting data (CRMD_ERMS_DEL_RDATA)
Hope this helps.
regards,
Muralidhar Prasad Chatna

Similar Messages

  • How to use AND and OR Combinations for a Rule in Rule Modeler of ERMS

    Hi Experts,
    When we are defining rules in the Rule Policy, we need to create a condition which uses a combinations of AND and OR.
    But the standard Rule Modeler of ERMS is allowing us to create conditions either using all AND or with all OR options.
    Is there anyway that we can define rules in the Rule Modeler using both AND and OR combinations at the same time.
    Regards,
    NIloufer

    A variant is a very specific LabVIEW datatype (really a C++ type object internally) and trying to pass that to a function, which excepts a flat memory pointer there, for sure will crash very quickly.
    As to endianess, yes Unflatten will be able to adjust for endianess, which in this case however is most likely exectly NOT what you want. So make sure that the you select native type for the endianess input on Unflatten from String. LabVIEW internally works with whatever is the native endianess, as will most likely your C++ DLL. The platform independent big endian format does only come into play when you receive data streams over some streaming interface like a network connection. Here it is desirable to use an endian format that is independent from the actual platform that generates and consumes the data stream. LabVIEWs default endianes is big endian here.
    But as long as you pass data directly to native components like DLLs there is no difference in endianess between what LabVIEW uses and what those components use.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • How to set Delete Rule to SET NULL while designing relational model .

    Dear All,
    Am new to SQL Developer Data Modeler and was doing some relational and logical design using Data modeler and i want to generate DDL script, while doing i was struck up with this issue.
    I have two table and tried to give Primary key and Foreign key relationship, in foreign key table i want to set the Delete rule has SET NULL, but it is not found. I have other three options like CASCADE, RESTRICT,NO ACTION. Whereas in logical design i can find SET NULL, NO ACTION and RESTRICT....
    But the DDL script is getting generated based on Relational design , i want to set foreign key has SET NULL in delete rule how to accomplish that?
    Please help me......
    Thanks in Advance
    Ramkumar.S

    Hi Ramkumar,
    If you unset the Mandatory property on the Foreign Key, you should then be able to set the Delete Rule to SET NULL.
    David

  • ERMS rule modeler?

    Hi, experts!
    I've set up ERMS already, but i have a problem with it.
    The problem is that I recieve e-mail from external internet address and I see it in SCOT trnx.
    But in SOST trnx I see 2 e-mails to be sent and in CRM_ERMS_LOGGING I see an error: Rule evaluates to FALSE.
    The rule i'm using for test is very simple:
    if e-mail subject contins 'Test' then forward to my e-mail
    Any ideas?
    Thanks!

    Check if you have completed the configurations correctly in Service Manager
    Check the attribute case sensitivity setup in he configuration of Define Repository.
    Try giving the string as TEST.

  • ERMS Rule Modeler: Forward E-mail - CRM-5.0

    Hi friends,
    We have a concern regarding the config of Rule Modeler in IC 5.0.  The Inbound email (SENDER S1) does not meet the conditions of the Rule Modeler is subject to FORWARD to MS-Outlook email address.  The email does go to MS-Outlook, BUT the SENDER is now new from ERMS S2 instead of original SENDER (S1).  This is maybe normal. However, we are expecting the original SENDER (S1) is part of email body which is NOT the case.
    Does someone experience this situation? Any suggestion is welcome.
    Thank you and best regards,
    Andy

    Really nobody knows this or experiencing similar situation?
    Any input on this.
    Andy

  • ERMS Rule Modeler: Delete draft rules

    Hello,
    I have an urgent query on ERMS rule modeler.
    Once a draft version is created, how can we delete it? I noticed that we can only delete the rules within the Draft rules node but not the node itself.
    This way if you wish to edit the released rules again, it is not possible because it asks to release draft rules first (which you don't want).
    Is there a way to delete the draft version or cancel the changes once draft version is created so that we can edit the released rule?
    Any report or via rule modeler?
    Best Regards,
    Mohit

    Hi Mohit,
    hope I get your question right... but you have a node with released rules and one with draft...Just go to edit modus and delete the whole node...
    Go to edit modus and select the node with Draft rules
    Click on the Bucket and save and there are gone...
    Hope it helps.
    Regards,
    Martin

  • Rule Modeler in ERMS

    Hi,
    Can we configure our own actions in Rule Modeler for ERMS.
    If yes, how it is done.
    Thanks and Regards
    Adi

    Wondering if you made any progress in this area. Would appreciate if you could share your experiences.
    Thanks
    Rakesh

  • Where to create and maintain rule modeler

    Hi Experts,
                       Where can I create and maintain Rule Modeler to set up ERMS, and kindly provide what are the steps required to maintain rule modeler. thanks
    Regards,
    Lakshmana.P

    Hello,
    It depends a little on the CRM release you are using. In older versions of CRM up to CRM 5.0, the Rule Modeler is accessed from the Netweaver (Enterprise) Portal via the IC Manager role (though it can also be launched directly using the BSP application from SAP GUI). In CRM 2006s/CRM 2007 and CRM 7.0 the Rule Modeler is available in the CRM WebClient from the IC Manager business role. It's located under the menu heading, "Process Modeling".
    Best regards,
    John

  • Where to maintain Rule Modeler Profile in SPRO?

    Hi All,
    I am creating Request for Change transactions in CRM, and everytime I create a document it shows an error asking to 'Maintain Rule Modeler Profile in Customizing' - I have been trying to find where to maintain this setting but unable to find it.
    Could anyone of you help me out on this, Thnx.
    Regards.

    Jacob,
    If you want more information on the rule modeler, you can also check:
    [http://sapcrmweblog.blogspot.com/2011/02/enhanced-ic-webclient-alerts.html|http://sapcrmweblog.blogspot.com/2011/02/enhanced-ic-webclient-alerts.html]
    [http://sapcrmweblog.blogspot.com/2010/09/intent-driven-interactions.html|http://sapcrmweblog.blogspot.com/2010/09/intent-driven-interactions.html]
    [http://sapcrmweblog.blogspot.com/2010/10/routing-of-escalated-service-tickets.html|http://sapcrmweblog.blogspot.com/2010/10/routing-of-escalated-service-tickets.html]
    [http://sapcrmweblog.blogspot.com/2010/09/escalate-button-in-interaction-record.html|http://sapcrmweblog.blogspot.com/2010/09/escalate-button-in-interaction-record.html]
    Regards,
    Pieter

  • Association Rule Model Fails to Build

    Hi all
    I am running the association rules model (java api) and sometimes when I use attributes from lower hierarchies the model fails to complete and runs for
    ever. In addition when I stop the process from netbeans the hard disk indicator remains permenantly on and my computer is really slow and I am unable to access anything. My attributes are quite long strings (include also gaps). Do you think that affects the model?
    Thank u
    K

    Based on the number of rows and transactions, you are averaging 23.5 items per transaction. With only 80+ items and a few value combinations for each, my guess is that the baskets are quite dense. Many of the transactions will contain a decent-sized portion of the item name-value combinations.
    Association rules has a parameter to limit the length of the rules that are generated. Have you set this to try limiting to shorter rules? Have you tried a maximum of length 2 to see if it completes? My guess is that the density of the data leads to exponentially larger combinations of rules as the length of the rule increases, and this requires more memory.
    Please try to constrain the rule length to experiment. Once you have short rules (single antecedent item), take a look and see how many rules and itemsets are generated at your provided support and confidence levels (support will constrain itemsets, and support plus confidence will constrain rules). Try to increase the maximum rule length by one more, and see how fast the count of rules and itemsets expand.
    This should help understand more about your data and the correct choice of algorithm parameters.
    Ari

  • Enhancing the Rule Modeler

    Hello All,
    We have a set of requirements which cannot be implemented using any of the existing contexts in the Rule Modeler Repository.  We are looking at enhancing the Rule Modeler by creating/adding a new Context to the existing Rule Modeler Repository.
    Any pointers/guidance on how we can go about this would be much appreciated
    Cheers
    Subu

    Hello All,
    We have a set of requirements which cannot be implemented using any of the existing contexts in the Rule Modeler Repository.  We are looking at enhancing the Rule Modeler by creating/adding a new Context to the existing Rule Modeler Repository.
    Any pointers/guidance on how we can go about this would be much appreciated
    Cheers
    Subu

  • How to know whether a vacation rule is set for a user

    Hi,
    How to know whether a vacation rule is set for a user or not in the BPM process. Can anyone help me in this.
    Thanks,

    In Linux a user has to have read permission on a file to even see that it exists. As a result, if a user (or a group to which they belong) doesn't have read access to the file File.exists() will return false. Windows which doesn't have as tightly controlled access to files will admit that a file exists whether it can be read or not.
    PS.
    This is proof that I should never answer a question off the top of my head when I haven't had my red bull yet. This is wrong. You will be able to see it if you have read and execute on the directory.
    thumps self in head
    Message was edited by:
    puckstopper31

  • Rule Modeler, Order Routing -  Partner function to update ?

    Hi,
    I have configured order routing in rule modeler based on categories to determine the org unit to which the order should get routed too.
    On execution, the partner function 'SLFN0003 - Support Team' gets changed to the BP for the org unit.
    My question is - I cannot find any link between Order routing and Partner function SLFN0003 - How does the system know that it needs to update this partner fucntion only ?
    If I create my own Z Parnter function, how can I get the order routing to change this partner function type ?
    Any help will be appriciated.
    Thanks,
    Raj

    Solution: Problem solved. Error was the name of the attribute. It has to be POST_CODE1_IB
    and not ZPOST_CODE1_IB.

  • New Context for 'Problems' in Rule modeler not working

    Hi,
    I am using the Rule modeler to determine the Service team based on selected Categorization schema for Incidents - it's working fine. Now I want to implement the same for Problems
    I created a new Z Context (Master Request) to create a rule policy for Problems -> assigned rule policy to a ZServ.Mgr.Profile Unfortunately the rule policy is not working for problems. The new ZContext was copied from existing SERVICEREQUEST context which also copied all the services within.
    Am I missing something ? Please help.
    BR.
    P.S incidents have an action definition with method DISPATCH that determines service team - same has been assigned to Problems.

    Had to use 2 Dispatch methods to determine the service team.

  • Conditions in rule modeler based on user status

    Hi there,
    We work with incidents and problems in CRM 7.0 and I want to create a rule in the rule modeler based on the user status on my problem ZITP. But when creating the conditions I only get the standard user status from status profile IT00001, -2 and -3. I have created my own Z-status profiles, but I can't select them here.
    Any suggestions ?
    Best regards
    Annette

    Indeed,
    The coding in CL_CRM_SRQM_RULE_FIS_US_STATUS seems a little hardcoded to the standard status schema.
    SELECT stsma estat txt30 FROM tj30t INTO TABLE lt_status WHERE spras = sy-langu AND stsma LIKE *'IT%*'. "#EC CI_GENBUFF
    LIKE 'IT%' makes me think that all user status schemas starting with IT are selected, and not your Z-schema.
    My best guess would be to either create an OSS message to SAP, or create your own class (like the one mentioned, with just slightly different coding), and in customizing (check the note where it mentions settings to ORDER_STATUS_E), assign your own class and reset the valuet to "dropdown box".
    This should fix your problem.
    Regards,
    Pieter

Maybe you are looking for