Rule or script or not possible?

Here's the deal. I have several rules set up that move my incoming mail to various mailboxes. Once in those mailboxes, I can't seem to figure out how to have individual emails deleted after a 30-day period. It appears that rules only automatically apply to an email when it is first downloaded and once it is transferred to one of these folders I must manually select all emails and run a rule to delete old emails. This is quite annoying with over 20 mailboxes.
IS THERE ANY WAY TO HAVE MY MAILBOXES AUTOMATICALLY UPDATED TO DELETE OLD EMAILS?

If the rules aren't working for you, you could set up a Smart Mailbox.
In Mail, in the menu bar, go to, Mailbox > New Smart Mailbox..., then configure it as follows:
Contians messsage which match (all) of the following conditions:
(Date Received), (is not in the last), (30), (Days)
Then select all the messages and delete them.... A little Automated and a little Manual!
You may want to look at the other options on theis screen as well!
These smart albums, folders are all over the place, iTunes, iPhoto etc.. and are very useful.
Will
1GHz G4, 15" PowerBook, Airport Extreme & Express, 1G iPod Mini   Mac OS X (10.4.6)   Please help others by marking questions as Answered (+perhaps Solved or Helpful)

Similar Messages

  • Request does not contain any saved update rules; rollback not possible

    Hi,
    In BW on hana, there's a 3.x flow DSO where it loaded a request from PSA.
    It failed due to activation error SID Generation.  But unfortunately, due to PSA Deletion process chain, it's PSA Request got deleted.
    Now, we couldn't delete the red request(failed request) from the 3.x flow DSO.
    If we try to delete, it shows job has been completed successfully with the following message:
    Job started
    Step 001 started (program RSDELPART1, variant &0000000004233, user ID )
    Delete running: DataStore object ZREBATE, from 630,138 to 630,138
    Delete is scheduled; Selection conditions were substituted
    Request REQU_6412GVIEWBJ0TZZIMZE2TZIOR does not contain any saved update rules; rollback not possible
    Deletion of request REQU_6412GVIEWBJ0TZZIMZE2TZIOR from data target ZREBATE failed
    Deletion of request REQU_6412GVIEWBJ0TZZIMZE2TZIOR from data target ZREBATE failed
    Request REQU_6412GVIEWBJ0TZZIMZE2TZIOR does not contain any saved update rules; rollback not possible
    Job finished
    I went to the table RSICCONT and checked the mentioned request.  But I couldn't find delete option enabled.  Even our basis team doesn't have authorization to delete the  mentioned request from the standard table RSICCONT.
    Request you to please help me how to handle this.
    Regards,
    Antony Jerald.

    Hi Antony,
    Once you have deleted the data in PSA there is no way to reconstruct the request hence you can do below things to correct it
    1) Identify the No of Records which having error , because if you have more records it will take more time as in debug mode we have option to edit only one record at one.
    2) Display only one record in Active table and change it using the Debug option ( not recommended ), but as you are in corner we need to use this
    3) change the records with respective values and active the request again
    Regards
    Jagan

  • Not possible to setup icloud email filter rules from ipad

    Users on ipads with icloud for email appear to have no way to set or edit their email filter rules, as this functionality is not provided via any mail app menu, and attempts login and edit these via webmail is not possible since Apple has set  icloud.com to intercept and disallow ipad web browser logins.   Is there a workaround or do we just direct people over to gmail?

    No, there is no workaround available. Unfortunately, you would have to use a PC or Mac in order to sign in to the web portal www.cloud.com.

  • Rule or script to delete specific attachments in Mail?

    Some people send signature images with every email, wasting disk space and making it difficult to search for emails with useful attachments.
    I would like to have a rule or script that deletes PointlessLogo.gif from incoming mail, while leaving other attachments intact.
    A search of the archives turns up a thread from years ago asking the same thing, apparently it was not possible with OS 10.4 (https://discussions.apple.com/message/4133181#4133181).
    Does this capability exist in Mountain Lion?

    Some people send signature images with every email, wasting disk space and making it difficult to search for emails with useful attachments.
    I would like to have a rule or script that deletes PointlessLogo.gif from incoming mail, while leaving other attachments intact.
    A search of the archives turns up a thread from years ago asking the same thing, apparently it was not possible with OS 10.4 (https://discussions.apple.com/message/4133181#4133181).
    Does this capability exist in Mountain Lion?

  • Mail rule or script

    I´m using Mail and OrganizePro on my Mac. I would like to add a script working like if I move an email to a specific folder it should automatic create a task in OrganizePro related to the email. Any ideas how this can be done ? It is possible to create OrganizePro tasks by forwarding the email to a specific email. My problem is that mail rules can not be triggered by new mail added to a folder.
    DA

    My initial thought was that you could run a script and then move the mail to the mail folder.  However, it seems that OrganizePro is not scriptable so it's not possible.
    You could:
    select an email
    run a script (from the Scripts menubar) that will forward the email to the OrganizePro address and then move the mail to the desired folder.

  • Changing font/-size of a text field on master-pages not possible? (field prop)

    Hi,
    I would like to change the font and font-size of a textfield on a master page.
    I wonder if I do anything wrong, because the font-options (size, font etc.) are simple greyed out / not avaliable, when I click on my text field.
    It seems, there is any way to customize the font-properties of a textfield (only) on master-page.
    Well I guess it would work with java script in init-event ...  but really, why the hell it should not be possible simply to use the properties/text properties?!
    Please correct me if I am wrong. Do I do anything wrong or is it really not possible to customize font of a text field on master pages?

    Hi,
    I was just about to post, that I figured it out.
    Actually, I use Livecycle Designer in SAP (transaction SFP). There seems to be a bug (one of hundrets by the way).
    If I click on a field, that does not have text-property e.g. subform, text-option menu greys out.
    Afterwards it stay this way until I click/doubleclick into a simple text (not text field). From that moment on, text/font-option menu is available again, until I click on something without text. => So pay attention and click wisely
    coming soon: "SAP meets Livecycle Designer - a (Bug)Lovestory", hardcover 124 Pages. ; )
    by the way: SAP does not sopport interactive forms higher than Reader 8.1. Its statement "8.1 is fine enough for everything you need in a SAP/Adobe Interactive Form". So beware of using XFA higher than in 8.1. sad, but true ...

  • BDC transaction "The function is not possible"

    Dear Experts,
    I have made a BDC transaction program according to recording from SHDB in order to have batch transaction for FB50.
    However, when I run the program. It shows an error "The function is not possible". But when I press the "Save" button manually, the function passed and result is saved. Just do not know what happens.
    report YFB50 no standard page heading line-size 255.
    include bdcrecx1.
    type-pools : TRUXS.
    data : rawdata type TRUXS_T_TEXT_DATA.
    parameters: sfile TYPE localfile default 'C:\fb50.txt'.
    parameters: plant like BKPF-BUKRS default '1000'.
    data: pfile type string.
    data: post_date(8) type c.
    data: record_count(2) type c.
    data: v_HKONT(19) type c.
    data: v_SHKZG(19) type c.
    data: v_WRBTR(19) type c.
    data: v_SGTXT(19) type c.
    data: v_KOSTL(19) type c.
    ***    DO NOT CHANGE - the generated data section - DO NOT CHANGE    ***
    *   If it is nessesary to change the data section use the rules:
    *   1.) Each definition of a field exists of two lines
    *   2.) The first line shows exactly the comment
    *       '* data element: ' followed with the data element
    *       which describes the field.
    *       If you don't have a data element use the
    *       comment without a data element name
    *   3.) The second line shows the fieldname of the
    *       structure, the fieldname must consist of
    *       a fieldname and optional the character '_' and
    *       three numbers and the field length in brackets
    *   4.) Each field must be type C.
    *** Generated data section with specific formatting - DO NOT CHANGE  ***
    data: begin of record occurs 0,
    * data element: HKONT
            HKONT(010),
    * data element: SHKZG
            SHKZG(007),
    * data element: WRBTR
            WRBTR(017),
    * data element: SGTXT
            SGTXT(050),
    * data element: KOSTL
            KOSTL(010),
          end of record.
    *** End generated data section ***
    start-of-selection.
    pfile = sfile.
    concatenate sy-datum+6(2) sy-datum+4(2) sy-datum+0(4) into post_date.
    CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
         FILENAME                = pfile
    TABLES
         DATA_TAB                = rawdata
    EXCEPTIONS
         CONVERSION_ERROR        = 1
         FILE_OPEN_ERROR         = 2
         FILE_READ_ERROR         = 3
         INVALID_TYPE            = 4
         NO_BATCH                = 5
         UNKNOWN_ERROR           = 6
         INVALID_TABLE_WIDTH     = 7
         GUI_REFUSE_FILETRANSFER = 8
         CUSTOMER_ERROR          = 9
         OTHERS                  = 10.
    IF SY-SUBRC <> 0.
         WRITE:/ 'SY-SUBRC:', SY-SUBRC.
    ENDIF.
    CALL FUNCTION 'TEXT_CONVERT_CSV_TO_SAP'
    EXPORTING
         I_FIELD_SEPERATOR = ';'
         I_TAB_RAW_DATA = rawdata
    TABLES
         I_TAB_CONVERTED_DATA = record
    EXCEPTIONS
         CONVERSION_FAILED = 1
         OTHERS = 2.
    perform bdc_dynpro      using 'SAPMF05A' '1001'.
    *Input header information
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    *Document Date
    perform bdc_field       using 'ACGL_HEAD-BLDAT'
                                  post_date.
    *Posting Date
    perform bdc_field       using 'ACGL_HEAD-BUDAT'
                                  post_date.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/ECCDE'.
    perform bdc_dynpro      using 'SAPLACHD' '1000'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=ENTR'.
    *Company Code
    perform bdc_field       using 'BKPF-BUKRS'
                                  plant.
    perform bdc_dynpro      using 'SAPMF05A' '1001'.
    *Input header information
    perform bdc_field       using 'BDC_OKCODE'
                                  '/BU'.
    *Document Date
    perform bdc_field       using 'ACGL_HEAD-BLDAT'
                                  post_date.
    *Posting Date
    perform bdc_field       using 'ACGL_HEAD-BUDAT'
                                  post_date.
    *Input item text
    loop at record.
    *write sy-tabix to record_count.
    *concatenate 'ACGL_ITEM-HKONT(' record_count ')' into v_HKONT.
    *concatenate 'ACGL_ITEM-SHKZG(' record_count ')' into v_SHKZG.
    *concatenate 'ACGL_ITEM-WRBTR(' record_count ')' into v_WRBTR.
    *concatenate 'ACGL_ITEM-SGTXT(' record_count ')' into v_SGTXT.
    *concatenate 'ACGL_ITEM-KOSTL(' record_count ')' into v_KOSTL.
    perform bdc_field       using v_HKONT
                                  record-HKONT.
    perform bdc_field       using v_SHKZG
                                  record-SHKZG.
    perform bdc_field       using v_WRBTR
                                  record-WRBTR.
    perform bdc_field       using v_SGTXT
                                  record-SGTXT.
    perform bdc_field       using v_KOSTL
                                  record-KOSTL.
    endloop.
    perform bdc_transaction using 'FB50'.
    Here is my input:
    206090203;H;41.74;abc;MISHK
    206090203;H;14.36;abc;FACHK
    206100100;S;41.74;def;MISHK
    206070100;S;14.36;def;FACHK
    Regards,
    Cato

    Make your LOOP.... ENDLOOP... Like this
    LOOP AT RECORD.
    perform bdc_dynpro      using 'SAPMF05A' '1001'.
    *Input header information
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    *Document Date
    perform bdc_field       using 'ACGL_HEAD-BLDAT'
                                  post_date.
    *Posting Date
    perform bdc_field       using 'ACGL_HEAD-BUDAT'
                                  post_date.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/ECCDE'.
    perform bdc_dynpro      using 'SAPLACHD' '1000'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=ENTR'.
    *Company Code
    perform bdc_field       using 'BKPF-BUKRS'
                                  plant.
    perform bdc_dynpro      using 'SAPMF05A' '1001'.
    *Input header information
    perform bdc_field       using 'BDC_OKCODE'
                                  '/BU'.
    *Document Date
    perform bdc_field       using 'ACGL_HEAD-BLDAT'
                                  post_date.
    *Posting Date
    perform bdc_field       using 'ACGL_HEAD-BUDAT'
                                  post_date.
    *Input item text
    **loop at record.
    *write sy-tabix to record_count.
    *concatenate 'ACGL_ITEM-HKONT(' record_count ')' into v_HKONT.
    *concatenate 'ACGL_ITEM-SHKZG(' record_count ')' into v_SHKZG.
    *concatenate 'ACGL_ITEM-WRBTR(' record_count ')' into v_WRBTR.
    *concatenate 'ACGL_ITEM-SGTXT(' record_count ')' into v_SGTXT.
    *concatenate 'ACGL_ITEM-KOSTL(' record_count ')' into v_KOSTL.
    perform bdc_field       using v_HKONT
                                  record-HKONT.
    perform bdc_field       using v_SHKZG
                                  record-SHKZG.
    perform bdc_field       using v_WRBTR
                                  record-WRBTR.
    perform bdc_field       using v_SGTXT
                                  record-SGTXT.
    perform bdc_field       using v_KOSTL
                                  record-KOSTL.
    **endloop.
    perform bdc_transaction using 'FB50'.
    ENDLOOP.
    Now should work fine..

  • ABUMN: Posting with trans.type 300 not possible (No acquisition posted)

    Hello everyone,
    I have seen a few threads on this topic, however I am still not finding a resolution to my issue.  I am very new to the FICO configuration scene and probably need a little more hand holding than the others who have asked this question.
    I am having and issue using ABUMN while transfering a Capital Investment Project (CIP Asset) under a asset class of AUC, to a standard fixed asset.  The CIP has been capitalized.  However, when I try to perform the transfer I am receiving the following error:
    Posting with trans.type 300 not possible (No acquisition posted)
    Message no. AA324
    Diagnosis
    Transaction type 300 belongs to a transaction type group, which can only be used to post to assets to which posting has already been performed. However, no postings have been made to this asset.
    Procedure
    Use a transaction type from a transaction type group, which can be used for the first acquisition to an asset.
    I have read through SAP NOTE 327088 (for retirements transfer variant 4) and it just doesn't help me with the issue.  I know it probably should, but I do not know enough about this process in order for it to make a whole lot of sense.
    If anyone can help me with this, it would be greatly appreciated.  Again, I am very new, so I will probably have several follow-up questions as well.
    Thanks in advance for the help!
    Rhonda

    Okay...
    I have finally figured this out on my own.
    When trying to transfer a capital investment project asset with an AuC class (asset under construction), ABUMN is not to be used.
    1st.  The internal order needs to be fully settled (KO02).  Create a settlement rule "FUL" for the designated fixed asset.
    2nd.  Run "Actual Settlement" run via KO88.
    This should transfer everything from the CIP asset to the fixed asset.  You can double check this via the S_ALR_87011967 - ... by Plant report.  Run this report prior to performing the steps above and the money will show in the CIP asset account, run it again after the above steps.  The CIP should be zeroed out and the fixed asset should now carry the amount.

  • Posting with transaction type 160 is not possible at MR8M

    MODERATOR:  Do not post (or request) email address or links to copyrighted or confidential information on these forums.  If you do, the thread will be LOCKED and all points UNASSIGNED.  If you have some information, please consider posting it to the [Wiki|https://wiki.sdn.sap.com/wiki/display/ERPFI/Home] rather than sharing via email.  Thank you for your assistance.
    Hi All,
    We raised  a PO w.r.t CWIP asset and posted GRN (MIGO - Transaction typr:100) and Invoice (MIRO).
    Here, Invoice posted wrongly, So we are trying to reverse the invoice with MR8M (which is posted thru MIRO).
    But system populating one message as per the following:
    Posting with transaction type 160 is not possible here, see long text
    Message no. AAPO 177
    Diagnosis:
    Transaction type 160 has a depreciation limitation, although posting is not mandatory in all of the depreciation areas entered However, it is not possible to select depreciation areas in the current transactions.
    Procedure:
    Check the specification of transaction type 160 or use transaction MR8M to enter the transaction
    Please help
    Sairavi
    kumarfi9gmailcom

    Welcome to the forum.
    As a newbie you should understand the forum rules where you are not suppose to post any basic or repeated question.  To avoid this, you should make a search here
    [Forum Search|http://forums.sdn.sap.com/search!default.jspa?objID=f327]
    Type the same error text in Search Terms so that you will find the solution.
    thanks
    G. Lakshmipathi

  • Use of Input Variables in SQL-Queries Sometimes Not Possible

    Only in simple SELECT-statements the use of input variables ([%0], [%1], etc.) work without problems.
    In more complex queries the use of these variables is not possible (e.g. SELECT-statements with sub-queries, sometimes when UNION is used - but I couldn't find any general rule when the problems will arise; sometimes two different queries with the same query-structure behave in different ways when these variables are used).
    In these cases the query is not executed - not even the input-window to enter values into the input variables is displayed. The query stops with some strange error-messages in the status line. These error-messages doesn't have any relation to the actual query - sometimes it refers to field-names never used in the query or refers to syntax error which do not exist.
    If the input variables are replaced by constant values there are no problems so there can't be any syntax errors - the only difference is the presence or absence of input variables.
    Example:
      provided that the queries have a certain complexity
      SELECT ...
      FROM   ... OINV Tx ...
      WHERE  ... Tx.DocDate >= [%0] ...
      does not work,
      SELECT ...
      FROM   ... OINV Tx ...
      WHERE  ... Tx.DocDate >= '1.1.2007' ...
      works!
    Does anybody have run into the same problem and now if it is a bug of SAP-BO or an error on behalf of the user? Does anybody know a way to correct the problem?
    Thanks in advance!
    Frank
    By the way: Are there any rules where exactly input variables can be used in a query?
    Only in SELECT-statements? Where there exactly?
    In statements outside of SELECT?

    Only SAP Partners Can access service.sap.com/notes, but I think it is possible to search in them from the customer portal as well.
    Here are summary of the two notes mentioned before this:
    730960:
    <i>
    The following query is an example for how to define variables in long
    queries rather than using "Fixed Declares".
    You need to use exactly the same template as follows, do not delete
    "comments" from this query.
    The only changes you need to do :
    1. In the first and in the fifth rows you need to select the table to which you would like to relate the variable e.g. in this example, the variable is related to the table VPM1 - 'Payments to Vendors - Rows'.
    2. In the fourth and in the eighth rows you need to select the field to which you would like to define the variables e.g. in this example, the variable is the field 'DueDate'.
    /SELECT FROM [dbo].[VPM1] T0/
    declare  @fromdate as datetime
    /* WHERE */
    set @fromdate = /* T0.DueDate */ '[%0]'
    /SELECT FROM [dbo].[VPM1] T1/
    declare  @tilldate as datetime
    /* WHERE */
    set @tilldate = /* T0.DueDate */ '[%1]'
    select  OVPM.docnum, VPM1.dueDate,VPM1.CheckNum, VPM1.Branch,
    VPM1.BankCode, VPM1.CheckSum, OVPM.CardName,
    case
    when OPCH.docnum is null then VPM2.docEntry
    else OPCH.docnum
    end as 'docnum'
    from OVPM INNER join VPM1 on OVPM.docnum = VPM1.docnum
    left join  VPM2 LEFT JOIN OPCH ON VPM2.DocEntry = OPCH.DocEntry
    on OVPM.docnum = VPM2.docnum
    where OVPM.Canceled = 'N' AND VPM1.DueDate >=@fromdate AND
    VPM1.DueDate <=@tilldate
    </i>
    955295:
    <i>
    Using SAP Business One Survey Variables (parameters) in a 'Set' SQL Statement can give an error in the Query Generator.
    For Example:
    Declare @Num as numeric(2)
    Set @Num = [%0]
    Select T0.DocNum
    From ORDR T0
    Where DocNum = @Num
    Other terms
    query, SQL, parameter, survey, variable, query generator, set, declare, [%0], table, error, SAP Business One
    Reason and Prerequisites
    FAQ
    Solution
    In such cases you need to put in an SQL remark statement a reference field in the DB for the Survey Variable (any field).
    For Example: (to make the above query work)
    Declare @Num as numeric(2)
    Set @Num = /* T0.DocNum */ [%0]
    Select T0.DocNum
    From ORDR T0
    Where docnum = @Num
    </i>

  • "Configuration not possible for material PC-2011 : Reason 3"

    Hi any MM guys,
    Please help me to solve the following thread.
    "Configuration not possible for material PC-2011 : Reason 3 --> Help
    Message no. V1360"
    Thanks and regards
    D.Srinivasa rao

    I believe you are trying use Sales order for services....and you have created material in services if I am not wrong.
    Again sticking to basic rules, you can configure only materials with type KMAT. Further for services, I believe there is a concept called milestone billing...which I am not sure about.
    Chk SAP notes, 625092, 26187
    BR,
    Krishna

  • Automatic time conversion is not possible

    Hi Friends,
    I have a problem in Transformation Level when i am mapping "automatic time conversion is not possible for source field FISCPER to 0FISCYEAR,FISCPER3".can any one help me in this issue.
    Thanks
    Narasimha

    Yes if it was date filed then it would have been possible.If you are trying to derive the fiscal year between datasource and cube then you can get it with the help of simple filed level routine.
    Map your fiscper field from source to fiscal year--Rule type Routine.
    RESULT = SOURCE_FIELDS-(Technical name of source field)+0(4).
    For Posting period
    Map your fiscper field from source to fiscper3 year--Rule type Routine.
    RESULT = SOURCE_FIELDS-(Technical name of source field)+4(3).
    This will give you the required output.
    Regards,
    AL

  • Why lables are not possible in smartforms.

    In script Lables are possible but in smartforms lables are not possible .
    why lables are not possible in smartforms?

    HI,
    Refer to the wiki in the link.
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/label%2bprinting%2bin%2bsmartforms
    Regards
    Sumit Agarwal

  • Error in BSP runtime repository: "Not possible to lock runtime repository"

    Hi,
    When I tried to change runtime repository of a component BT120H_CPL, in BSP component workbench, I am getting the following error: (The component is already enhanced one only).
    Not possible to lock runtime repository
    Message no. BSP_WD_TOOLS216
    Diagnosis
    You can only lock and edit runtime repositories that are saved statically in a BSP page. This means that the page may not contain dynamic elements, such as ABAP source code or page includes. Dynamic BSP pages must be loaded via HTTP and cannot be locked or edited.
    It is also not possible to lock or edit runtime repositories that are only referenced as a URL or that are in the MIME repository.
    System Response
    Lock not possible. You remain in display mode.
    Could you please help me out for the same.
    Thanks,
    Sandeep

    Hi Sandeep,
                    There is another way of commenting the code as below:
    <!--  commented code -->
    This wouldn't cause any scripting comment. Generally we use <% %> type of comments if we want to comment more than 1 line at a time. But for repository we have to use code as I mentioned above for each line seperately.
    I hope that resolves your query
    Thanks,
    Rohit

  • Links in between 2 Nodes in the Interactive Scripts is not working ,

    Hi, Experts
    I saw u r reply's Regarding, Interactive Scripts, I felt happy thats Somebody is here with some expertise ,
    Here my problem is , we are developing the scripts, we are attching the nodes in the Scripts with Arrow line , But here for Some Scripts that link is working, it means once u click on the node it is going to next level and for Some perticular Scripts this link is not working , in webclient Script navigation is not possible, it mean the link is not picking up ,
    Can u help in this issue ,
    if , it neccessary i will send the Scrpit XML file to U , so that it is easy to investigate,
    i did redesign the Script for lot of time , i think this is happening Because OF JAVA , or ITS error in the Server,
    Can u please suggest me in this , it is urgent ..........
    Regards
    Sreelatha

    I solved it this way:
    I solved it like this: In the Form1_Load event i did:
    SetToLevel(treeViewMS1.Nodes, 1);
    In my case i wanted it to begin by default in level 1.
    Then in the numericupdown1 changed value event:
    private void numericUpDown1_ValueChanged(object sender, EventArgs e)
    SetToLevel(treeViewMS1.Nodes, (int)numericUpDown1.Value);
    Then the method SetToLevel:
    void SetToLevel(TreeNodeCollection nodes, int level)
    foreach (TreeNode node in nodes)
    node.Collapse(false);
    ExpandToLevel(nodes, level);
    And last the method EXpandToLevel:
    void ExpandToLevel(TreeNodeCollection nodes, int level)
    if (level > 0)
    foreach (TreeNode node in nodes)
    node.Expand();
    ExpandToLevel(node.Nodes, level -1);
    And now it's working perfect like i wanted it to work. When changing the numericupdown value it's changing the node tree expand/collapse levels.

Maybe you are looking for

  • 64 Bit CS5 Won't run after I unchecked the 'C' Scratch Drive....

    The problem started when I went into the 64 bit version of CS5;  edit : preferences : performance and in the scratch drive options I unchecked the 'C' drive option. (I know.... doesn't make sense to do that)  CS5 runs from the C drive BTW.  I then cl

  • Airport Extreme Connection problem with new MacBook

    Help- For the past 2 years, I have had no problems with my Airport Extreme. My MacBook Pro (2006), My wife's iBook G4 and two AirPort Express units used as remote speaker connections have been rock solid. Both iPhone and one iPod touch work like a ch

  • CPU accessible registers in LabView FlexRIO FPGA

    Howdy folks, I am wondering if it's possible to get the following behaviors out of Labview.  I'm thinking it's not. System description:  CVI application that communicates with PXIe FlexRIO via controls and indicators. Problem: Designing to a CPU-FPGA

  • Why is the voice not as clear as before.

    Because i am a semi blind user, the voice is not as clear as before. The main keyboard is to bright, not user friendly for me.

  • Excise duty on nonvaluated item

    Hi,   when asset is sold out how the excise duty will calcuated for non valuated items on that asset...