Ruler Tool problem

I use the ruler tool a lot and hate the way it keeps reverting to the eye-dropper tool in the toolbar all the time! Is there a way to stop this from happening? If you use the ruler tool, then some other tools all seems okay until you save the image - at that point the ruler is replaced with the default eye-dropper tool. Therefore if you want to use it again you have to select it again which is a pain. Most tools seem to stay as they are when saving except the ruler. This was the same in CS3 by the way. I was hoping this might have been fixed in CS4.
I'm using CS4ext in Vista Business.
Thanks for any help.
Brian

brianpeart wrote:
I use the ruler tool a lot and hate the way it keeps reverting to the eye-dropper tool in the toolbar all the time! Is there a way to stop this from happening?
Not as far as I know. People have been complaining about this for as long as I can remember.

Similar Messages

Re CS5 Ruler tool has stopped functioning. How can I correct this problem?

Re CS5 Ruler tool has stopped functioning. How can I correct this problem?

First try re-setting the Ruler Tool from the tool's fly-out menu.
If that doesn't do it, then trash and recreate Photoshop preferences.
If you had at least indicated your platform, I could be more specific, but here it goes anyway:
To re-create the preferences files for Photoshop, start the application while holding down Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop Settings file?"
For next time you post:
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

CC 2014 Ruler tool Straighten button is dimmed in layered files (Mac and Win versions)

I have a Grayscale/8 bpc file with a Levels Adjustment layer.
In CC 2014 I use the ruler tool to drag out a line and the notice the Straighten button in the Options bar is dimmed whether I have the Background layer or the adjustment layer selected. If I flatten the image the Straighten button is active.
In CC, if I select the Background layer, the Straighten button is active. Not if I select the Adjustment layer. Same behavior in CS6. (So the problem looks to be in CC2014 only)
This is noted in both the Mac and Windows versions of CC 2014.1.0 (which would leave out the OS and hardware glitches.)
Tried a flat grayscale file, added an adjustment layer, and noticed the same problem in CC 2014. (that eliminates a buggy file)
The fact that at least with the Background layer selected in CC and CS6, the Straighten button is active, so this is looking like something specific to CC 2014.
Before I call it a "bug", I would like to know if anyone is seeing this or knows of a fix?

Ok, changing the background layer does activate the straighten button without having to flatten the document.
I'll keep this question open for more feedback before marking it.

Ruler tool-staying visible

The problem with the ruler tool is that when I select another tool the former DOES not stay visible. something I need.
For example, I make a measurement with the ruler tool, then select the move tool and the mesurement made dissapears from the document.
Is there a way I can fix the above issue?
Thanks

No...this does not achieve what I want though. because even if I record a measurement, upon changing the tool, from measurement to select for example, the measurement line dissapears.
I want the measurement line be visible regardless of the photoshop tool selected at anytime.
Of course I do not know if what I am asking is feasible at all.
Thanks anyway.

Ruler Tool- Error 48: File or folder does not exist

I am trying to use the new RULER TOOL in CS5 (64-bit mode) running 10.6.4 and I get the following error:
Error 48: File or folder does not exist.
Line: 31
-> $.evalFile( g_StackScriptFolderPath + "Geometry.jsx");
Any ideas?

i'm getting the exact error using Windows XP with CS5.5
error 48: file or folder does not exist
line: 31
-> $.evalFile(g_StackScriptFolderPath + "Geometry.jsx");
HELP!!!
someone
hello ... anyone out there?
how do we get support for this error?
e

How do I add the ruler tool to my tools bar?

I don't see the ruler tool (for tilt correction, etc.) on the left bar display. How do I add/display it in CS5?

And for all that expand to show the nested Tools, there will be a tiny black triangle in the upper-right corner of the Button in the Toolbar.
I think that most Tools now have nested Tools in the group, so about all will have the little triangle.
Good luck,
Hunt

How can I get the ruler tool to show length in inches?

This doc says the units the ruler tool shows length in are changed using preferences:
http://helpx.adobe.com/en/photoshop/using/positioning-ruler-tool.html
This document says the ruler tool always uses pixels unless you change measurement scale on a per image basis:
http://livedocs.adobe.com/en_US/Photoshop//10.0/help.html?content=WS3D3EF585-502B-49d2-85F F-537E9DC25C21.html
So far, the latter seems to be the case, but that's horribly inconvenient. Is there something I'm doing wrong or is there some setting somewhere that will make the ruler tool display measurement length in inches (or what ever I set in preferences)?
Note that I am not talking about the units shown at the top and left side when the ruler is in view, I'm talking about the ruler tool's position and length data, whether or not the ruler is in view.

Trevor,
Unfortunately, that only changes the ruler units, not the mouse coordinates displayed when taking measurements using the ruler tool.
gener7 nailed it though.
rgr

Laptop mode tools problem with kernel 3.0

today I just updated the system and my laptop runs dramatically hotter after that. I read the archwiki, it does talk about the laptop mode tools problem with kernel 3.0 but when I opened the file /usr/sbin/laptop_mode, the lines which the wiki mentions are not there. Does anyone here have the same problem and can you offer the solution?
Here is my /usr/sbin/laptop_mode
#! /bin/sh
# Script to start or stop laptop_mode, and to control various settings of the
# kernel, hardware etc. that influence power consumption.
# This script is a part of Laptop Mode Tools. If you are running a supported
# power management daemon, this script will be automatically called on power
# state change.
# Configure laptop mode tools in /etc/laptop-mode/laptop-mode.conf, and in
# the broken-out config files in /etc/laptop-mode/conf.d.
# Please consult the manual pages laptop-mode.conf(8) and laptop_mode(8) for
# additional information.
# Maintainer: Ritesh Raj Sarraf ([email protected])
# Original Author: Bart Samwel ([email protected])
# Project home page: http://samwel.tk/laptop_mode
# Contributors to this script: Bart Samwel
# Kiko Piris
# Micha Feigin
# Andrew Morton
# Herve Eychenne
# Dax Kelson
# Jan Polacek
# ... and many others that I've stopped
# keeping track of.
# Based on a script for Linux 2.4 written by Jens Axboe.
set -a
# The laptop mode tools version number. Extracted by the installer makefile
# as well, so don't change the format!
LMTVERSION=1.59
# This script is loaded from multiple scripts to set the config defaults
# and to read the configuration on top of those. Only when the command is
# recognized does this script do anything else.
VERBOSE_OUTPUT=0
ENABLE_LAPTOP_MODE_ON_BATTERY=1
ENABLE_LAPTOP_MODE_ON_AC=0
ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED=0
PARTITIONS="auto /dev/mapper/*"
LM_BATT_MAX_LOST_WORK_SECONDS=600
LM_AC_MAX_LOST_WORK_SECONDS=360
DEF_MAX_AGE=30
LM_READAHEAD=3072
NOLM_READAHEAD=128
CONTROL_READAHEAD=1
CONTROL_NOATIME=0
USE_RELATIME=1
CONTROL_HD_IDLE_TIMEOUT=1
LM_AC_HD_IDLE_TIMEOUT=4 # 20 seconds
LM_BATT_HD_IDLE_TIMEOUT=4 # 20 seconds
NOLM_HD_IDLE_TIMEOUT=244 # 2 hours
DEF_UPDATE=5
DEF_XFS_AGE_BUFFER=15
DEF_XFS_SYNC_INTERVAL=30
DEF_XFS_BUFD_INTERVAL=1
XFS_HZ=100
CONTROL_MOUNT_OPTIONS=1
BATT_HD_POWERMGMT=1
LM_AC_HD_POWERMGMT=254
NOLM_AC_HD_POWERMGMT=254
CONTROL_HD_POWERMGMT=0
CONTROL_HD_WRITECACHE=0
NOLM_AC_HD_WRITECACHE=1
NOLM_BATT_HD_WRITECACHE=0
LM_HD_WRITECACHE=0
LM_DIRTY_RATIO=60
LM_DIRTY_BACKGROUND_RATIO=1
NOLM_DIRTY_BACKGROUND_RATIO=10
NOLM_DIRTY_RATIO=40
LM_SECONDS_BEFORE_SYNC=2
BATT_CPU_MAXFREQ=medium
BATT_CPU_MINFREQ=slowest
BATT_CPU_GOVERNOR=ondemand
BATT_CPU_IGNORE_NICE_LOAD=1
LM_AC_CPU_MAXFREQ=fastest
LM_AC_CPU_MINFREQ=slowest
LM_AC_CPU_GOVERNOR=ondemand
LM_AC_CPU_IGNORE_NICE_LOAD=1
NOLM_AC_CPU_MAXFREQ=fastest
NOLM_AC_CPU_MINFREQ=slowest
NOLM_AC_CPU_GOVERNOR=ondemand
NOLM_AC_CPU_IGNORE_NICE_LOAD=0
CONTROL_CPU_FREQUENCY=0
HD="/dev/[hs]d[abcdefgh]"
CONTROL_SYSLOG_CONF=0
LM_AC_SYSLOG_CONF=/etc/syslog-on-ac-with-lm.conf
NOLM_AC_SYSLOG_CONF=/etc/syslog-on-ac-without-lm.conf
BATT_SYSLOG_CONF=/etc/syslog-on-battery.conf
SYSLOG_CONF_SIGNAL_PROGRAM=syslogd
SYSLOG_CONF=/etc/syslog.conf
CONTROL_DPMS_STANDBY=0
BATT_DPMS_STANDBY=300
LM_AC_DPMS_STANDBY=1200
NOLM_AC_DPMS_STANDBY=1200
CONTROL_CPU_THROTTLING=0
BATT_CPU_THROTTLING=medium
LM_AC_CPU_THROTTLING=minimum
NOLM_AC_CPU_THROTTLING=minimum
CONTROL_START_STOP=1
CONTROL_TERMINAL=0
TERMINALS="/dev/vc/1 /dev/vcs1"
BATT_TERMINAL_BLANK_MINUTES=1
BATT_TERMINAL_POWERDOWN_MINUTES=2
LM_AC_TERMINAL_BLANK_MINUTES=10
LM_AC_TERMINAL_POWERDOWN_MINUTES=10
NOLM_AC_TERMINAL_BLANK_MINUTES=10
NOLM_AC_TERMINAL_POWERDOWN_MINUTES=50
ENABLE_AUTO_HIBERNATION=0
HIBERNATE_COMMAND=/usr/sbin/hibernate
AUTO_HIBERNATION_ON_CRITICAL_BATTERY_LEVEL=1
DISABLE_LAPTOP_MODE_ON_CRITICAL_BATTERY_LEVEL=1
AUTO_HIBERNATION_BATTERY_CHARGE_MAH=0
AUTO_HIBERNATION_BATTERY_CHARGE_MWH=0
MINIMUM_BATTERY_CHARGE_MAH=0
MINIMUM_BATTERY_CHARGE_MWH=0
ASSUME_SCSI_IS_SATA=1
CONTROL_BRIGHTNESS=0
BATT_BRIGHTNESS_COMMAND=false
LM_AC_BRIGHTNESS_COMMAND=false
NOLM_AC_BRIGHTNESS_COMMAND=false
LOG_TO_SYSLOG=1
DEBUG=0
ENABLE_LAPTOP_MODE_TOOLS=1
# Initialize the PATH Variable
export PATH="${PATH}":/bin:/sbin:/usr/bin:/usr/sbin
# This is a 2 phase locking approach. LMT_REQ_LOCK is the outer lock and LMT_INVOC_LOCK is the inner lock
# We take this approach to ensure the scenario that, "At any point when an event occurs (AC/BATT), the
# kernel can generate multiple events spanning over a couple of events. The first event is honored and
# lmt executes. If the last event triggered at the 9th second, there is a fair chance that a good amount
# of state change would have occured in the OS, to honor that state, we keep an outer lock (LMT_REQ_LOCK)
# handy, so that those changes can also be applied and not forgotten.
# Workflow:
# Event-1 is generated and lmt executes (lmt runtime could span 5-10 seconds)
# At seventh second, 4 events generate. But Event-1 is still running.
# We don't want to discard all the remaining 4 events, but at least honor 1 so that we can act to the changes
# that occured in the last 7 seconds.
# So, Event-2 acquire LMT_REQ_LOCK and waits to acquire LMT_INVOC_LOCK (which is acquire by Event-1)
LMT_REQ_LOCK="/var/lock/lmt-req.lock"
LMT_INVOC_LOCK="/var/lock/lmt-invoc.lock"
FLOCK=`which flock`
checkint ()
# $1 arg should be the string/integer
# that you want to check for as an integer.
echo $1 | grep "[^0-9]" > /dev/null 2>&1
return $?;
# Returns 1 if it is an integer
# Function to handle logging
LOGGER=`which logger`;
log ()
# $1 should be msg type
# $2 should be the real msg
if [ x$LOG_TO_SYSLOG = x1 ]; then
# NOTE: Add the check on $2 being empty, once you are confident
# that there aren't any bugs in logging. And no bugs in executing
# modules and logging
if [ -x $LOGGER -a "$1" != "STATUS" ]; then
#if [ -z $2 ]; then
# continue
#elif [ "$1" = "MSG" ]; then
if [ "$1" = "MSG" ]; then
logger -p daemon.info -t laptop-mode "$2";
elif [ "$1" = "ERR" ]; then
logger -p daemon.err -t laptop-mode "$2";
elif [ "$1" = "VERBOSE" ]; then
if [ x$VERBOSE_OUTPUT = x1 ]; then
logger -p daemon.debug -t laptop-mode "$2";
fi
else
logger -p daemon.notice -t laptop-mode "$2";
fi
fi
fi
if [ "$1" = "VERBOSE" ]; then
$LM_VERBOSE && echo "$2" >/dev/fd/2;
elif [ "$1" = "ERR" ]; then
echo "$2" >/dev/fd/2;
else
# Message of type MSG and STATUS can go to stdout.
echo "$2" >/dev/fd/1;
fi
enableDebug ()
# Check if debug is enabled
if [ x$(($(basename $1 | cut -d . -f1 | tr "[:lower:]" "[:upper:]" | sed 's/-/_/g')_DEBUG)) = x1 ]; then
set -vx
fi
disableDebug ()
# Check if debug is enabled
if [ x$(($(basename $1 | cut -d . -f1 | tr "[:lower:]" "[:upper:]" | sed 's/-/_/g')_DEBUG)) = x1 ]; then
set +vx
fi
# No default on these ones -- we need to detect if they have been set, for
# backward compatibility with MINIMUM_BATTERY_MINUTES etc.
AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT=
MINIMUM_BATTERY_CHARGE_PERCENT=
# Backward compatibility variable that is sometimes
# set externally (Debian init system)
unset VERBOSE
lmt_load_config ()
# Source config. Some config settings have been moved from the main config file
# to modular configuration files, and to support existing laptop-mode.conf
# files from earlier versions, we source the modular configuration files FIRST.
if [ -d /etc/laptop-mode/conf.d ] ; then
for CONF in /etc/laptop-mode/conf.d/*.conf ; do
if [ -r "$CONF" ] ; then
. "$CONF"
#Handle individual module debug settings
if [ "$DEBUG" -eq 1 ]; then
export $(basename $CONF | cut -d . -f1 | tr "[:lower:]" "[:upper:]" | sed 's/-/_/g')_DEBUG=1
log "VERBOSE" "Enabling debug mode for module $CONF"
fi
DEBUG=0
else
log "MSG" "Warning: Configuration file $CONF is not readable, skipping."
fi
done
fi
if [ -r /etc/laptop-mode/laptop-mode.conf ] ; then
. /etc/laptop-mode/laptop-mode.conf
else
log "ERR" "$0: Configuration file /etc/laptop-mode/laptop-mode.conf not present or not readable."
exit 1
fi
if [ x$ENABLE_LAPTOP_MODE_TOOLS = x0 ]; then
log "MSG" "laptop-mode-tools is disabled in config file. Exiting"
exit 0;
fi
# Add a simple bash debug mode switch
if [ "$DEBUG" -eq 1 ]; then
set -vx;
fi
# Support for old config settings
if [ "$AC_HD" != "" ] ; then
AC_HD_WITHOUT_LM="$AC_HD"
AC_HD_WITH_LM="$AC_HD"
fi
if [ "$VERBOSE" != "" ] ; then
VERBOSE_OUTPUT="$VERBOSE"
fi
if [ "$CPU_MAXFREQ" != "" ] ; then
BATT_CPU_MAXFREQ="$CPU_MAXFREQ"
fi
if [ "$MAX_AGE" != "" ] ; then
LM_BATT_MAX_LOST_WORK_SECONDS="$MAX_AGE"
LM_AC_MAX_LOST_WORK_SECONDS="$MAX_AGE"
fi
if [ "$DEF_AGE" != "" ] ; then
DEF_MAX_AGE="$DEF_AGE"
fi
if [ "$LAPTOP_MODE_ALWAYS_ON" != "" ] ; then
ENABLE_LAPTOP_MODE_ALWAYS="$LAPTOP_MODE_ALWAYS_ON"
fi
if [ "$LM_WHEN_LID_CLOSED" != "" ] ; then
ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED="$LM_WHEN_LID_CLOSED"
fi
if [ "$REMOUNT_PARTITIONS" != "" ] ; then
PARTITIONS="$REMOUNT_PARTITIONS"
fi
if [ "$READAHEAD" != "" ] ; then
LM_READAHEAD="$READAHEAD"
fi
if [ "$DO_REMOUNT_NOATIME" != "" ] ; then
CONTROL_NOATIME="$DO_REMOUNT_NOATIME"
fi
if [ "$DO_HD" != "" ] ; then
CONTROL_HD_IDLE_TIMEOUT="$DO_HD"
fi
if [ "$AC_HD_WITH_LM" != "" ] ; then
LM_AC_HD_IDLE_TIMEOUT="$AC_HD_WITH_LM"
fi
if [ "$AC_HD_WITHOUT_LM" != "" ] ; then
NOLM_HD_IDLE_TIMEOUT="$AC_HD_WITHOUT_LM"
fi
if [ "$BATT_HD" != "" ] ; then
LM_BATT_HD_IDLE_TIMEOUT="$BATT_HD"
fi
if [ "$DO_REMOUNTS" != "" ] ; then
CONTROL_MOUNT_OPTIONS="$DO_REMOUNTS"
fi
if [ "$DO_HD_POWERMGMT" != "" ] ; then
CONTROL_HD_POWERMGMT="$DO_HD_POWERMGMT"
fi
if [ "$AC_HDPARM_POWERMGMT_WITH_LM" != "" ] ; then
LM_AC_HD_POWERMGMT="$AC_HDPARM_POWERMGMT_WITH_LM"
fi
if [ "$AC_HDPARM_POWERMGMT_WITHOUT_LM" != "" ] ; then
NOLM_AC_HD_POWERMGMT="$AC_HDPARM_POWERMGMT_WITHOUT_LM"
fi
if [ "$BATT_HDPARM_POWERMGMT" != "" ] ; then
BATT_HD_POWERMGMT="$BATT_HDPARM_POWERMGMT"
fi
if [ "$DO_WRITECACHE" != "" ] ; then
CONTROL_HD_WRITECACHE="$DO_WRITECACHE"
fi
if [ "$AC_WRITECACHE_WITHOUT_LM" != "" ] ; then
NOLM_AC_HD_WRITECACHE="$AC_WRITECACHE_WITHOUT_LM"
fi
if [ "$BATT_WRITECACHE" != "" ] ; then
LM_HD_WRITECACHE="$BATT_WRITECACHE"
fi
if [ "$DIRTY_RATIO" != "" ]; then
LM_DIRTY_RATIO="$DIRTY_RATIO"
fi
if [ "$DIRTY_BACKGROUND_RATIO" != "" ] ; then
LM_DIRTY_BACKGROUND_RATIO="$DIRTY_BACKGROUND_RATIO"
fi
if [ "$DEF_DIRTY_RATIO" != "" ]; then
NOLM_DIRTY_RATIO="$DEF_DIRTY_RATIO"
fi
if [ "$DEF_DIRTY_BACKGROUND_RATIO" != "" ] ; then
NOLM_DIRTY_BACKGROUND_RATIO="$DEF_DIRTY_BACKGROUND_RATIO"
fi
if [ "$DO_CPU" != "" ] ; then
CONTROL_CPU_FREQUENCY="$DO_CPU"
fi
if [ "$CONTROL_CPU_MAXFREQ" != "" ] ; then
CONTROL_CPU_FREQUENCY="$CONTROL_CPU_MAXFREQ"
fi
if [ "$AC_CPU_MAXFREQ_WITH_LM" != "" ] ; then
LM_AC_CPU_MAXFREQ="$AC_CPU_MAXFREQ_WITH_LM"
fi
if [ "$AC_CPU_MAXFREQ_WITHOUT_LM" != "" ] ; then
NOLM_AC_CPU_MAXFREQ="$AC_CPU_MAXFREQ_WITHOUT_LM"
fi
if [ "$DO_SYSLOG" != "" ] ; then
CONTROL_SYSLOG_CONF="$DO_SYSLOG"
fi
if [ "$SYSLOG_SIGNAL_PROGRAM" != "" ] ;then
SYSLOG_CONF_SIGNAL_PROGRAM="$SYSLOG_SIGNAL_PROGRAM"
fi
if [ "$AC_SYSLOG_WITH_LM" != "" ] ; then
LM_AC_SYSLOG_CONF="$AC_SYSLOG_WITH_LM"
fi
if [ "$AC_SYSLOG_WITHOUT_LM" != "" ] ; then
NOLM_AC_SYSLOG_CONF="$AC_SYSLOG_WITHOUT_LM"
fi
if [ "$BATT_SYSLOG" != "" ] ; then
BATT_SYSLOG_CONF="$BATT_SYSLOG"
fi
if [ "$ENABLE_LAPTOP_MODE_ALWAYS" != "" ] ; then
ENABLE_LAPTOP_MODE_ON_AC="$ENABLE_LAPTOP_MODE_ALWAYS"
fi
if [ "$MINIMUM_BATTERY_MINUTES" != "" -a "$MINIMUM_BATTERY_CHARGE_PERCENT" = "" ] ; then
# Use a very conservative estimate (1% = 1 battery minute, 100 minutes in a battery)
# for backward compatibility.
MINIMUM_BATTERY_CHARGE_PERCENT="$MINIMUM_BATTERY_MINUTES"
fi
if [ -z "$MINIMUM_BATTERY_CHARGE_PERCENT" ] ; then
# Apply the default, now that we've determined that this is the minimum.
MINIMUM_BATTERY_CHARGE_PERCENT=3
fi
if [ "$AUTO_HIBERNATION_BATTERY_MINUTES" != "" -a "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" = "" ] ; then
# Use a very conservative estimate (1% = 1 battery minute, 100 minutes in a battery)
# for backward compatibility.
AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT="$AUTO_HIBERNATION_BATTERY_MINUTES"
fi
if [ -z "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" ] ; then
# Apply the default, now that we've determined that this is the minimum.
AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT=2
fi
# Postprocessing
if [ "$VERBOSE_OUTPUT" -ne 0 ] ; then
OUTPUT="/dev/stdout"
LM_VERBOSE="[ 1 = 1 ]"
else
OUTPUT="/dev/null"
LM_VERBOSE="[ 1 = 0 ]"
fi
if [ "$PARTITIONS" = "" ] ; then
PARTITIONS="auto /dev/mapper/*"
fi
# Expand shell wild cards immediately.
PARTITIONS=$( echo $PARTITIONS )
TERMINALS=$( echo $TERMINALS )
# Convert seconds to hdparm -S format
# Everything over 20 minutes is interpreted as 2 hours.
seconds_to_hdparm_S() {
if [ "$1" -eq 0 ] ; then
# disable.
echo 0
elif [ "$1" -gt 0 -a "$1" -lt 5 ] ; then
# 5 seconds minimum
echo 1
elif [ "$1" -le $((240*5)) ] ; then
# Values between 1 and 240 signify increments of 5 seconds
echo $(($1 / 5))
elif [ "$1" -lt $((30*60)) ] ; then
# Values between 20 and 30 minutes are rounded up to 30 minutes.
echo 241
elif [ "$1" -lt $((12*30*60)) ] ; then
# Values between 30 minutes and 6 hours (exclusive) yield values between
# 241 and 251, in 30-minute increments.
echo $(( 240 + ($1 / (30*60)) ))
else
# Larger values effectively indicate no timeout at all.
echo 0
fi
# Convert configured idle timeouts to hdparm -S format.
if [ "$LM_AC_HD_IDLE_TIMEOUT_SECONDS" != "" ] ; then
LM_AC_HD_IDLE_TIMEOUT=$(seconds_to_hdparm_S $LM_AC_HD_IDLE_TIMEOUT_SECONDS)
fi
if [ "$LM_BATT_HD_IDLE_TIMEOUT_SECONDS" != "" ] ; then
LM_BATT_HD_IDLE_TIMEOUT=$(seconds_to_hdparm_S $LM_BATT_HD_IDLE_TIMEOUT_SECONDS)
fi
if [ "$NOLM_HD_IDLE_TIMEOUT_SECONDS" != "" ] ; then
NOLM_HD_IDLE_TIMEOUT=$(seconds_to_hdparm_S $NOLM_HD_IDLE_TIMEOUT_SECONDS)
fi
# The main workhorse.
lmt_main_function ()
if [ "$1" = "status" ] ; then
# Display a status report.
log "STATUS" "Mounts:"
mount | sed "s/^/ /"
log "STATUS" " "
log "STATUS" "Drive power status:"
for disk in $HD; do
if [ -r $disk ]; then
hdparm -C $disk 2>/dev/null | sed "s/^/ /"
else
log "STATUS" " Cannot read $disk, permission denied - $0 needs to be run as root"
fi
done
log "STATUS" " "
log "STATUS" "(NOTE: drive settings affected by Laptop Mode cannot be retrieved.)"
log "STATUS" " "
log "STATUS" "Readahead states:"
cat /etc/mtab | while read DEV MP FST OPTS DUMP PASS ; do
# skip funny stuff
case "$FST" in
rootfs|unionfs|tmpfs|squashfs|sysfs|usbfs|proc|devpts) continue
esac
if [ -b $DEV ] ; then
if [ -r $DEV ] ; then
log "STATUS" " $DEV: $((`blockdev --getra $DEV` / 2)) kB"
else
log "STATUS" " Cannot read $DEV, permission denied - $0 needs to be run as root"
fi
fi
done
log "STATUS" " "
if [ -e /var/run/laptop-mode-tools/enabled ] ; then
log "STATUS" "Laptop Mode Tools is allowed to run: /var/run/laptop-mode-tools/enabled exists."
else
log "STATUS" "Laptop Mode Tools is NOT allowed to run: /var/run/laptop-mode-tools/enabled does not exist."
fi
log "STATUS" " "
STATFILES="/proc/sys/vm/laptop_mode /proc/apm /proc/pmu/info /proc/sys/vm/bdflush /proc/sys/vm/dirty_ratio /proc/sys/fs/xfs/age_buffer /proc/sys/fs/xfs/sync_interval /proc/sys/fs/xfs/lm_age_buffer /proc/sys/fs/xfs/lm_sync_interval /proc/sys/vm/pagebuf/lm_flush_age /proc/sys/fs/xfs/xfsbufd_centisecs /proc/sys/fs/xfs/xfssyncd_centisecs /proc/sys/vm/dirty_background_ratio /proc/sys/vm/dirty_expire_centisecs /proc/sys/fs/xfs/age_buffer/centisecs /proc/sys/vm/dirty_writeback_centisecs /sys/devices/system/cpu/*/cpufreq/cpuinfo_*_freq /sys/devices/system/cpu/*/cpufreq/scaling_governor /proc/acpi/button/lid/*/state /proc/acpi/ac_adapter/*/state /proc/acpi/battery/*/state /sys/class/power_supply/*/online /sys/class/power_supply/*/state"
for THISFILE in $STATFILES ; do
if [ -e "$THISFILE" ] ; then
log "STATUS" "$THISFILE:"
if [ -r "$THISFILE" ] ; then
cat "$THISFILE" | sed "s/^/ /"
else
log "STATUS" " Not accessible, permission denied - $0 needs to be run as root."
fi
log "STATUS" " "
fi
done
elif [ "$1" != "readconfig" -a "$1" != "defaults" ] ; then
KLEVEL="$(uname -r |
IFS='.-' read a b c
echo $a.$b
KMINOR="$(uname -r |
IFS='.-' read a b c d
# Strip any stuff from the end -- only the initial digits are part of the KMINOR.
echo $c | sed -e 's/$[[:digit:]]*$.*/\1/'
# Stop exporting everything -- what we do from here is private.
set +a
if [ "$1" = "--version" ] ; then
log "MSG" "Laptop Mode Tools $LMTVERSION"
exit 0
fi
if [ ! -e /proc/sys/vm/laptop_mode ] ; then
log "ERR" "Kernel does not have support for laptop mode. Please apply the laptop mode"
log "ERR" "patch or install a newer kernel."
exit 1
fi
if [ ! -w /proc/sys/vm/laptop_mode ] ; then
log "ERR" "You do not have enough privileges to enable laptop_mode."
exit 1
fi
INIT=0 # Display info in init script format?
FORCE=0 # Force reapplying the current state?
while [ "$1" != "" ] ; do
case "$1" in
init) INIT=1 ;;
force) FORCE=1 ;;
# Old options. We always do "auto" for any option now, but
# we still have to accept the options.
start) ;;
stop) ;;
auto) ;;
modules=*)
MODULES=$1
MODULES=${MODULES#"modules="}
devices=*)
DEVICES=$1
DEVICES=${DEVICES#"devices="}
*) log "ERR" "Unrecognized option $1."
exit 1 ;;
esac
shift
done
mkdir -p /var/run/laptop-mode-tools
# Used to display laptop mode state later on. This is the enabled/disabled
# state for laptop mode processing, it tells us nothing about whether laptop
# mode is actually _active_.
STATE=enabled
if [ "$ENABLE_LAPTOP_MODE_ON_BATTERY" -eq 0 -a "$ENABLE_LAPTOP_MODE_ON_AC" -eq 0 -a "$ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED" -eq 0 ] ; then
STATE=disabled
fi
# Determine the power state.
# First try /sys/class/power_supply/*
FOUND_SYS_CLASS_POWER_SUPPLY_AC=0
ON_AC=0
for POWER_SUPPLY in /sys/class/power_supply/* ; do
if [ -f $POWER_SUPPLY/type ] ; then
if [ "$(cat $POWER_SUPPLY/type)" = "Mains" ] ;then
log "VERBOSE" "Determining power state from $POWER_SUPPLY/online."
FOUND_SYS_CLASS_POWER_SUPPLY_AC=1
if [ "$(cat $POWER_SUPPLY/online)" = 1 ] ; then
ON_AC=1
fi
fi
fi
done
if [ $FOUND_SYS_CLASS_POWER_SUPPLY_AC = 1 ] ; then
# Already found it!
log "VERBOSE" "Not trying other options, already found a power supply."
elif [ -d /proc/acpi/ac_adapter ] ; then
log "VERBOSE" "Determining power state from /proc/acpi/ac_adapter."
ADAPTERS_FOUND=0
ON_AC=0
for ADAPTER in /proc/acpi/ac_adapter/* ; do
if [ -f $ADAPTER/state ] ; then
ADAPTERS_FOUND=1
STATUS=`awk '/^state: / { print $2 }' $ADAPTER/state`
if [ "$STATUS" = "on-line" ] ; then
ON_AC=1
fi
fi
done
if [ "$ADAPTERS_FOUND" -eq 0 ] ; then
ON_AC=1
fi
elif [ -f /proc/pmu/info ] ; then
log "VERBOSE" "Determining power state from /proc/pmu/info."
if ( grep -q "^AC Power.*0$" /proc/pmu/info ) ; then
log "VERBOSE" "/proc/pmu/info indicates absence of AC power."
ON_AC=0
else
# It is possible that there is no AC Power = 1 in the file,
# but we always assume AC power when we're not sure.
ON_AC=1
log "VERBOSE" "/proc/pmu/info indicates presence of AC power."
fi
elif [ -f /proc/apm ] ; then
log "VERBOSE" "Determining power state from /proc/apm."
read D1 D2 D3 APM_AC_STATE D0 </proc/apm
if [ "$APM_AC_STATE" = "0x00" ] ; then
ON_AC=0
else
ON_AC=1
fi
else
log "VERBOSE" "No /sys/class/power_supply, ACPI, APM or PMU power management information found -- assuming AC power is present."
ON_AC=1
fi
# Determine whether to activate or deactivate laptop mode.
ACTIVATE=0
if [ "$ON_AC" -eq 1 ] ; then
if [ "$ENABLE_LAPTOP_MODE_ON_AC" -ne 0 ] ; then
log "VERBOSE" "On AC power: Activating, because ENABLE_LAPTOP_MODE_ON_AC is set."
ACTIVATE=1
else
log "VERBOSE" "On AC power: Deactivating, because ENABLE_LAPTOP_MODE_ON_AC is not set."
ACTIVATE=0
fi
else
if [ "$ENABLE_LAPTOP_MODE_ON_BATTERY" -ne 0 ] ; then
log "VERBOSE" "On battery power: Activating, because ENABLE_LAPTOP_MODE_ON_BATTERY is set."
ACTIVATE=1
else
log "VERBOSE" "On battery power: Deactivating, because ENABLE_LAPTOP_MODE_ON_BATTERY is not set."
ACTIVATE=0
fi
fi
if [ "$ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED" -ne 0 -a "$ACTIVATE" -eq 0 ] ; then
if [ -x "`which hal-find-by-property`" ] ; then
HAL_LID_BUTTON=$(hal-find-by-property --key "button.type" --string "lid")
fi
if [ "$HAL_LID_BUTTON" != "" ] ; then
HAL_LID_BUTTON_STATE=$(hal-get-property --udi $(hal-find-by-property --key "button.type" --string "lid") --key "button.state.value")
if [ "$HAL_LID_BUTTON_STATE" = "true" ] ; then
log "VERBOSE" "Setting action to \"start\" because the lid is closed (says HAL)."
ACTIVATE=1
fi
elif [ -f /proc/acpi/button/lid/*/state ] ; then
if ( grep -q "closed" /proc/acpi/button/lid/*/state ) ; then
log "VERBOSE" 'Setting action to "start" because the lid is closed (says /proc/acpi/button/lid/*/state).'
ACTIVATE=1
fi
else
log "MSG" "Warning: ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED is set, but there is no file"
log "MSG" "/proc/acpi/button/lid/.../state, and hal information is not available either!"
fi
fi
# If the init script has not been run or has been run with the "stop"
# argument, then we should never start laptop mode.
if [ ! -f /var/run/laptop-mode-tools/enabled ] ; then
log "VERBOSE" "Laptop mode disabled because /var/run/laptop-mode-tools/enabled is missing."
STATE=disabled
fi
if [ "$ACTIVATE" -eq 1 -a -f /etc/default/laptop-mode ] ; then
. /etc/default/laptop-mode
if ! ( echo "$ENABLE_LAPTOP_MODE" |grep y ) ; then
log "VERBOSE" "Not starting laptop mode because it is disabled in /etc/default/laptop-mode."
STATE=disabled
fi
fi
if [ "$STATE" = "disabled" ] ; then
ACTIVATE=0
fi
# Check whether we are allowed to activate the data-loss-sensitive stuff.
# If the battery charge is too low, we want to disable this, but not the
# other power-saving stuff.
if [ "$ACTIVATE" -eq 0 ] ; then
ACTIVATE_WITH_POSSIBLE_DATA_LOSS=0
elif [ "$ON_AC" = 1 ] ; then
log "VERBOSE" "On AC, not checking minimum battery charge."
ACTIVATE_WITH_POSSIBLE_DATA_LOSS=1
else
ACTIVATE_WITH_POSSIBLE_DATA_LOSS=1
ENOUGH_CHARGE=0
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=0
# Weird way of checking that /sys/class/power_supply is not empty -- but it works.
if [ "$(echo /sys/class/power_supply/*)" != '/sys/class/power_supply/*' ] ; then
log "VERBOSE" "Not on AC and we have battery information in /sys/class/power_supply/BAT* -- checking minimum battery charge."
for BATT in /sys/class/power_supply/* ; do
BATT_TYPE=$(cat $BATT/type)
log "VERBOSE" "$BATT is of type $BATT_TYPE."
if [ "$BATT_TYPE" != "Battery" ] ; then
log "VERBOSE" "Not of type \"Battery\", skipping."
else
PREV_ENOUGH_CHARGE=$ENOUGH_CHARGE
PREV_ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=$ENOUGH_CHARGE_TO_PREVENT_HIBERNATION
log "VERBOSE" "Checking levels for $BATT."
PRESENT=$(cat $BATT/present)
log "VERBOSE" "Present: $PRESENT."
# Only do if the battery is present
if [ "$PRESENT" -eq 1 ] ; then
FOUND_AN_ENABLED_CHECK=0
FOUND_AN_ENABLED_HIBERNATION_CHECK=0
# Get the remaining capacity.
IN_UAH=0
IN_UWH=0
if [ -f $BATT/charge_now ] ; then
REMAINING=$(cat $BATT/charge_now)
IN_UAH=1 # charge_* is in microAmpere-hours
elif [ -f $BATT/energy_now ] ; then
REMAINING=$(cat $BATT/energy_now)
IN_UWH=1 # energy_* is in microWatt-hours
else
REMAINING=0
fi
if [ -z "$REMAINING" -o "$REMAINING" -eq 0 ] ; then
log "VERBOSE" "Battery does not report remaining charge. Perhaps it is not present?"
REMAINING=0
fi
log "VERBOSE" "Remaining charge: $REMAINING"
if [ -f $BATT/charge_full_design ] ; then
CAPACITY=$(cat $BATT/charge_full_design)
elif [ -f $BATT/energy_full_design ] ; then
CAPACITY=$(cat $BATT/energy_full_design)
else
CAPACITY=0
fi
if [ -z "$CAPACITY" -o "$CAPACITY" -eq 0 ] ; then
log "VERBOSE" "Battery does not report design full charge, using non-design full charge."
if [ -f $BATT/charge_full ] ; then
CAPACITY=$(cat $BATT/charge_full)
elif [ -f $BATT/energy_full_design ] ; then
CAPACITY=$(cat $BATT/energy_full)
else
CAPACITY=0
fi
if [ -z "$CAPACITY" -o "$CAPACITY" -eq 0 ] ; then
log "VERBOSE" "Battery does not report non-design full charge."
CAPACITY=0
fi
fi
log "VERBOSE" "Full capacity: $CAPACITY"
# Check the charge percentage
if [ "$MINIMUM_BATTERY_CHARGE_PERCENT" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$CAPACITY" -eq 0 ] ; then
log "MSG" "WARNING: Battery does not report a capacity. Minimum battery"
log "MSG" "charge checking does not work without a design capacity."
ENOUGH_CHARGE=1
elif [ "$(($REMAINING * 100 / $CAPACITY))" -ge "$MINIMUM_BATTERY_CHARGE_PERCENT" ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$CAPACITY" -eq 0 ] ; then
log "MSG" "WARNING: Battery does not report a design capacity. Auto hibernation"
log "MSG" "does not work without a design capacity."
ENOUGH_CHARGE=1
elif [ "$(($REMAINING * 100 / $CAPACITY))" -ge "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
# $BATT/alarm is the design_capacity_warning of a battery.
ALARM_LEVEL=$(cat $BATT/alarm)
if [ "$ALARM_LEVEL" -ne 0 ] ; then
if [ "$REMAINING" -le "$ALARM_LEVEL" ] ; then
# Restore the state we had before checking this battery, so that
# this battery does not count as having enough charge.
ENOUGH_CHARGE=$PREV_ENOUGH_CHARGE
elif [ "$FOUND_AN_ENABLED_CHECK" -eq 0 ] ; then
# This is the only check that is enabled. In that case a non-critical
# battery level counts as "enough". (If we would count non-critical
# battery levels as enough *always*, then the other settings would
# have no effect; this is only a final fallback.)
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_ON_CRITICAL_BATTERY_LEVEL" -ne 0 ] ; then
if [ "$REMAINING" -le "$ALARM_LEVEL" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=$PREV_ENOUGH_CHARGE_TO_PREVENT_HIBERNATION
elif [ "$FOUND_AN_ENABLED_HIBERNATION_CHECK" -eq 0 ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
# Fallback: hard values
if [ "$IN_UAH" -ne 0 ] ; then
if [ "$MINIMUM_BATTERY_CHARGE_MAH" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$REMAINING" -ge $((1000*"$MINIMUM_BATTERY_CHARGE_MAH")) ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_MAH" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$REMAINING" -ge $((1000*"$AUTO_HIBERNATION_BATTERY_CHARGE_MAH")) ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
elif [ "$IN_UWH" -ne 0 ] ; then
if [ "$MINIMUM_BATTERY_CHARGE_MWH" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$REMAINING" -ge $((1000*"$MINIMUM_BATTERY_CHARGE_MWH")) ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_MWH" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$REMAINING" -ge $((1000*"$AUTO_HIBERNATION_BATTERY_CHARGE_MWH")) ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
else
log "ERR" "Failed to determine battery charge. Battery charge units are not in"
log "ERR" "mWh, uWh, mAh or uAh."
fi
else
log "VERBOSE" "Battery is not present."
fi
fi
done
elif [ "$(echo /proc/acpi/battery/*)" != '/proc/acpi/battery/*' ] ; then
log "VERBOSE" "Not on AC and we have batteries in /proc/acpi/battery -- checking minimum battery charge."
for BATT in /proc/acpi/battery/* ; do
PREV_ENOUGH_CHARGE=$ENOUGH_CHARGE
PREV_ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=$ENOUGH_CHARGE_TO_PREVENT_HIBERNATION
BATT_STATE=$BATT/state
BATT_INFO=$BATT/info
log "VERBOSE" "Checking info and state for $BATT."
# Only do if the battery is present
if ( grep -q 'present:.*yes' $BATT_INFO ) ; then
FOUND_AN_ENABLED_CHECK=0
FOUND_AN_ENABLED_HIBERNATION_CHECK=0
# Get the remaining capacity.
REMAINING=`grep "remaining capacity:" $BATT_STATE | sed "s/.* $[0-9][0-9]* $.*/\1/" `
if [ -z "$REMAINING" ] ; then
log "VERBOSE" "Battery does not report remaining charte. Perhaps it is not present?"
REMAINING=0
fi
log "VERBOSE" "Remaining charge: $REMAINING"
CAPACITY=`grep "design capacity:" $BATT_INFO | sed "s/.* $[0-9][0-9]* $.*/\1/" `
if [ -z "$CAPACITY" ] ; then
log "VERBOSE" "Battery does not report capacity. Perhaps it is not present?"
CAPACITY=0
fi
log "VERBOSE" "Design capacity: $CAPACITY"
# Check the charge percentage
if [ "$MINIMUM_BATTERY_CHARGE_PERCENT" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$CAPACITY" -eq 0 ] ; then
log "MSG" "WARNING: Battery does not report a design capacity. Minimum battery"
log "MSG" "charge checking does not work without a design capacity."
ENOUGH_CHARGE=1
elif [ "$(($REMAINING * 100 / $CAPACITY))" -ge "$MINIMUM_BATTERY_CHARGE_PERCENT" ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$CAPACITY" -eq 0 ] ; then
log "MSG" "WARNING: Battery does not report a design capacity. Auto hibernation"
log "MSG" "does not work without a design capacity."
ENOUGH_CHARGE=1
elif [ "$(($REMAINING * 100 / $CAPACITY))" -ge "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
# Fallback: hard values.
# Determine the reporting unit.
IN_MAH=0
IN_MWH=0
if ( grep -q mWh $BATT_INFO ) ; then
IN_MWH=1
elif ( grep -q mAh $BATT_INFO ) ; then
IN_MAH=1
fi
if [ "$IN_MAH" -ne 0 ] ; then
if [ "$MINIMUM_BATTERY_CHARGE_MAH" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$REMAINING" -ge "$MINIMUM_BATTERY_CHARGE_MAH" ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_MAH" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$REMAINING" -ge "$AUTO_HIBERNATION_BATTERY_CHARGE_MAH" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
elif [ "$IN_MWH" -ne 0 ] ; then
if [ "$MINIMUM_BATTERY_CHARGE_MWH" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$REMAINING" -ge "$MINIMUM_BATTERY_CHARGE_MWH" ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_MWH" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$REMAINING" -ge "$AUTO_HIBERNATION_BATTERY_CHARGE_MWH" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
else
log "ERR" "Failed to determine battery charge. Battery charge units are not in"
log "ERR" "mWh or mAh."
fi
CAP_STATE=`sed -r 's/^capacity state:\s*(.*)\s*$/\1/;t;d' "$BATT_STATE"`
if [ "$DISABLE_LAPTOP_MODE_ON_CRITICAL_BATTERY_LEVEL" -ne 0 ] ; then
if [ "$CAP_STATE" = "critical" ] ; then
# Restore the state we had before checking this battery, so that
# this battery does not count as having enough charge.
ENOUGH_CHARGE=$PREV_ENOUGH_CHARGE
elif [ "$FOUND_AN_ENABLED_CHECK" -eq 0 ] ; then
# This is the only check that is enabled. In that case a non-critical
# battery level counts as "enough". (If we would count non-critical
# battery levels as enough *always*, then the other settings would
# have no effect; this is only a final fallback.)
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_ON_CRITICAL_BATTERY_LEVEL" -ne 0 ] ; then
if [ "$CAP_STATE" = "critical" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=$PREV_ENOUGH_CHARGE_TO_PREVENT_HIBERNATION
elif [ "$FOUND_AN_ENABLED_HIBERNATION_CHECK" -eq 0 ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
else
log "VERBOSE" "Battery is not present."
fi
done
else
ENOUGH_CHARGE=1
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
log "VERBOSE" "Not on AC and could not check battery state -- data loss sensitive features stay enabled and auto-hibernation will not work."
fi
if [ "$ENABLE_AUTO_HIBERNATION" -ne 0 -a "$ENOUGH_CHARGE_TO_PREVENT_HIBERNATION" -eq 0 ] ; then
log "VERBOSE" "None of the batteries have a charge above the auto-hibernation level."
log "VERBOSE" "Starting hibernation."
if [ -x $HIBERNATE_COMMAND ]; then
$HIBERNATE_COMMAND
elif [ -f /sys/power/state ]; then
grep -q disk /sys/power/state && echo disk > /sys/power/state
fi
# Don't continue -- if things are configured correctly, then we
# will be called on resume.
exit 0
fi
if [ "$ENOUGH_CHARGE" -eq 0 ] ; then
log "VERBOSE" "None of the batteries have a charge above the minimum level."
log "VERBOSE" "Deactivating data loss sensitive features."
ACTIVATE_WITH_POSSIBLE_DATA_LOSS=0
fi
fi
if [ "$INIT" -eq 0 ] ; then
log "MSG" "Laptop mode "
fi
# WAS_ACTIVE is used later on. If there is no /var/run/laptop-mode-tools/state, then
# we know that laptop mode wasn't active before.
WAS_ACTIVE=0
log "VERBOSE" "Checking if desired state is different from current state."
if [ -f /var/run/laptop-mode-tools/state ] ; then
read WAS_ACTIVE WAS_ON_AC WAS_ACTIVATE_WITH_POSSIBLE_DATA_LOSS WAS_STATE < /var/run/laptop-mode-tools/state
if [ "$WAS_STATE" != "" ] ; then
if [ "$WAS_ACTIVE" -eq "$ACTIVATE" -a "$WAS_ON_AC" -eq "$ON_AC" -a "$WAS_ACTIVATE_WITH_POSSIBLE_DATA_LOSS" -eq "$ACTIVATE_WITH_POSSIBLE_DATA_LOSS" -a "$WAS_STATE" = "$STATE" -a "$FORCE" -eq 0 ] ; then
log "MSG" "$STATE, "
if [ "$WAS_ACTIVE" -eq 1 ] ; then
log "MSG" "active [unchanged]"
if [ "$ACTIVATE_WITH_POSSIBLE_DATA_LOSS" -eq 0 ] ; then
log "MSG" " (Data-loss sensitive features disabled.)"
fi
else
log "MSG" "not active [unchanged]"
fi
exit 0
fi
fi
else
log "VERBOSE" "/var/run/laptop-mode-tools/state does not exist, no previous state."
fi
echo "$ACTIVATE $ON_AC $ACTIVATE_WITH_POSSIBLE_DATA_LOSS $STATE" > /var/run/laptop-mode-tools/state
if [ "$ACTIVATE" -eq 1 ] ; then
log "MSG" "$STATE, active"
if [ "$ACTIVATE_WITH_POSSIBLE_DATA_LOSS" -eq 0 ] ; then
log "MSG" " (Data-loss sensitive features disabled.)"
fi
else
log "MSG" "$STATE, not active"
fi
# Finally, call laptop-mode-tools modules. The modules can use the settings
# from the config files, but they may NOT assume the settings actually exist,
# as no defaults have been given for them.
# Note that the /usr/local/lib path is deprecated.
export FORCE STATE ON_AC ACTIVATE ACTIVATE_WITH_POSSIBLE_DATA_LOSS KLEVEL KMINOR WAS_ACTIVE LM_VERBOSE DEVICES
for SCRIPT in /usr/share/laptop-mode-tools/modules/* /usr/local/lib/laptop-mode-tools/modules/* /usr/local/share/laptop-mode-tools/modules/* /etc/laptop-mode/modules/* ; do
if [ -z "$MODULES" ] ; then
# If a module list has not been provided, execute all modules
EXECUTE_SCRIPT=1
else
# If a module list has been provided, execute only the listed
# modules.
EXECUTE_SCRIPT=0
for MODULE in $MODULES; do
# Attempt to remove the module name from the end of the
# full script path. If the module name matches the
# script, the name will be removed from the end of the
# full file path, leaving the path to the script. If
# there was not a match made, the module name would not
# be removed from the path, and $PATH_TO_SCRIPT would
# be the same as $SCRIPT.
PATH_TO_SCRIPT=${SCRIPT%%$MODULE}
# Execute the script if a match was found (module name
# was removed from the script path, making it shorter.
if [ $PATH_TO_SCRIPT != $SCRIPT ] ; then
EXECUTE_SCRIPT=1
fi
done
fi
if [ -x "$SCRIPT" -a $EXECUTE_SCRIPT -eq 1 ] ; then
log "VERBOSE" "Invoking module $SCRIPT."
SCRIPT_DEBUG=$SCRIPT; # We do this because in start-stop-programs module a $SCRIPT variable is used. That
# changes the whole meaning when passed to disableDebug ()
enableDebug $SCRIPT_DEBUG;
. $SCRIPT
disableDebug $SCRIPT_DEBUG;
else
log "VERBOSE" "Module $SCRIPT is not executable or is to be skipped."
fi
done
exit 0
# This fi closes the if for "readconfig". If I would have indented this one
# I would have indented the whole file. :)
fi
lmt_load_config
lock_retry ()
( $FLOCK -n -x -w 1 8 || exit 0;
i=10;
while [ $i -ge 1 ]
do
log "ERR" "Couldn't acquire lock. Retrying.... PID is $$\n"
$FLOCK -x -w 1 9 && lmt_main_function "$@" && break;
i=$(( $i - 1 ))
done
) 8>$LMT_REQ_LOCK
# Check and acquire locks and then exec.
( $FLOCK -n -x -w 1 8; ) 8>$LMT_REQ_LOCK
($FLOCK -n -x -w 1 9 && lmt_main_function "$@";) || lock_retry "$@"
) 9<>$LMT_INVOC_LOCK
# We do a special run of battery polling daemon here so that it does not get
# plagued by the lock. We need the polling daemon to be independent of any locks
if [ x$ENABLE_BATTERY_LEVEL_POLLING = x1 ] && [ x$BLACKLIST_IN_FLOCK = x1 ]; then
log "VERBOSE" "Battery level polling is enabled."
if [ x$ON_AC = x1 ] ; then
log "VERBOSE" "On AC, stopping the polling daemon."
# In AC mode we disable the polling daemon.
killall -q lm-polling-daemon
else
if ! pidof -x lm-polling-daemon ; then
log "VERBOSE" "On battery and there was no polling daemon yet, starting the polling daemon."
# If there is no polling daemon, we start one.
/usr/share/laptop-mode-tools/module-helpers/lm-polling-daemon < /dev/null > /dev/null 2> /dev/null &
fi
fi
else
log "VERBOSE" "Battery level polling is disabled."
fi
exit 0;
and here is the lines which archwiki mentions
case "$KLEVEL" in
"2.4" ) ;;
"2.6" ) ;;
log "ERR" "Unhandled kernel version: $KLEVEL ('uname -r' = '$(uname -r)')" >&2
exit 1
esac

I had the problem but edited the line in /usr/sbin/laptop_mode and it worked. But thoes lines are not there anymore. I guess they changed it at the recent update of laptop-mode-tools.
Regarding your heat problem; is there any other thing you use to cut down power usage (from AUR maybe)? I use acpi_call from AUR had to edit lines there aswell, but it should be updated by now.

Ruler tool error 48 on XP CS5.5

Re: Ruler Tool- Error 48: File or folder does not exist
i'm getting the exact error another posted on the Mac forum but I'm using Windows XP with CS5.5
error 48: file or folder does not exist
line: 31
-> $.evalFile(g_StackScriptFolderPath + "Geometry.jsx");
Preferences have been restored to default
how do we get support for this error?
system info:
Adobe Photoshop Version: 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch]) x32
Operating System: Windows XP 32-bit
Version: 5.1 Service Pack 3
System architecture: Intel CPU Family:6, Model:13, Stepping:8 with MMX, SSE Integer, SSE FP, SSE2
Physical processor count: 1
Processor speed: 1729 MHz
Built-in memory: 2047 MB
Free memory: 1205 MB
Memory available to Photoshop: 1658 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 900, right: 1440
Video Card Number: 1
Video Card: ATI MOBILITY RADEON X300
Driver Version: 6.14.10.6561
Driver Date: 20050804101018.000000-000
Video Card Driver: ati2dvag.dll
Video Mode: 1440 x 900 x 4294967296 colors
Video Card Caption: ATI MOBILITY RADEON X300
Video Card Memory: 64 MB
Serial number: 92628485317819668197
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS5.1\
Temporary file path: C:\DOCUME~1\e\LOCALS~1\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 88.5G, 42.8G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS5.1\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
   ACE.dll   ACE 2010/12/13-23:37:10   64.449933   64.449933
   adbeape.dll   Adobe APE 2011/01/17-12:03:36   64.452786   64.452786
   AdobeLinguistic.dll   Adobe Linguisitc Library   5.0.0
   AdobeOwl.dll   Adobe Owl 2010/06/03-13:43:23   3.0.93   61.433187
   AdobeOwlCanvas.dll   Adobe Owl Canvas   3.0.68   61.2954
   AdobePDFL.dll   PDFL 2010/12/13-23:37:10   64.341419   64.341419
   AdobePIP.dll   Adobe Product Improvement Program   5.5.0.1265
   AdobeXMP.dll   Adobe XMP Core   5.0   64.140949
   AdobeXMPFiles.dll   Adobe XMP Files   5.0   64.140949
   AdobeXMPScript.dll   Adobe XMP Script   5.0   64.140949
   adobe_caps.dll   Adobe CAPS   4,0,42,0
   adobe_OOBE_Launcher.dll   Adobe OOBE Launcher   2.0.0.36 (BuildVersion: 2.0; BuildDate: Mon Jan 24 2011 21:49:00)   1.000000
   AFlame.dll   AFlame 2011/01/10-23:33:35   64.444140   64.444140
   AFlamingo.dll   AFlamingo 2011/01/10-23:33:35   64.436825   64.436825
   AGM.dll   AGM 2010/12/13-23:37:10   64.449933   64.449933
   ahclient.dll    AdobeHelp Dynamic Link Library   1,6,0,20
   aif_core.dll   AIF   2.0   53.422628
   aif_ogl.dll   AIF   2.0   53.422628
   amtlib.dll   AMTLib   4.0.0.21 (BuildVersion: 4.0; BuildDate: Mon Jan 24 2011 21:49:00)   1.000000
   amtservices.dll   AMTServices   4.0.0.21 (BuildVersion: 4.0; BuildDate: Mon Jan 24 2011 21:49:00)   1.000000
   ARE.dll   ARE 2010/12/13-23:37:10   64.449933   64.449933
   asneu.dll    AsnEndUser Dynamic Link Library   1, 7, 0, 1
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/01/10-23:33:35   64.436825   64.436825
   AXEDOMCore.dll   AXEDOMCore 2011/01/10-23:33:35   64.436825   64.436825
   Bib.dll   BIB 2010/12/13-23:37:10   64.449933   64.449933
   BIBUtils.dll   BIBUtils 2010/12/13-23:37:10   64.449933   64.449933
   boost_threads.dll   DVA Product   5.0.0
   cg.dll   NVIDIA Cg Runtime   2.0.0015
   cgGL.dll   NVIDIA Cg Runtime   2.0.0015
   CoolType.dll   CoolType 2010/12/13-23:37:10   64.449933   64.449933
   data_flow.dll   AIF   2.0   53.422628
   dvaadameve.dll   DVA Product   5.0.0
   dvacore.dll   DVA Product   5.0.0
   dvaui.dll   DVA Product   5.0.0
   ExtendScript.dll   ExtendScript 2011/01/17-17:14:10   61.452840   61.452840
   FileInfo.dll   Adobe XMP FileInfo   5.0   64.140949
   icucnv36.dll   International Components for Unicode 2009/06/17-13:21:03    Build gtlib_main.9896
   icudt36.dll   International Components for Unicode 2009/06/17-13:21:03    Build gtlib_main.9896
   icudt42.dll   International Components for Unicode   4, 2, 0, 0
   icuin42.dll   International Components for Unicode   4, 2, 0, 0
   icuuc42.dll   International Components for Unicode   4, 2, 0, 0
   image_flow.dll   AIF   2.0   53.422628
   image_runtime.dll   AIF   2.0   53.422628
   JP2KLib.dll   JP2KLib 2010/12/13-23:37:10   64.181312   64.181312
   libeay32.dll   The OpenSSL Toolkit   0.9.8g
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   LogSession.dll   LogSession   2.1.2.1263
   MPS.dll   MPS 2010/12/13-23:37:10   64.450375   64.450375
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.4137
   msvcp71.dll   Microsoft® Visual Studio .NET   7.10.3077.0
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.4137
   msvcr71.dll   Microsoft® Visual Studio .NET   7.10.3052.4
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.4137
   onOneToolbox2.dll   onOne Toolbox2 Dynamic Link Library   2.2.0
   OnOneWidgets.dll    OnOneWidgets dll   2.5
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS5.1   CS5.1
   Plugin.dll   Adobe Photoshop CS5   CS5
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (32 bit)   2.5.0.232
   PSArt.dll   Adobe Photoshop CS5.1   CS5.1
   PSViews.dll   Adobe Photoshop CS5.1   CS5.1
   SCCore.dll   ScCore 2011/01/17-17:14:10   61.452840   61.452840
   shfolder.dll   Microsoft(R) Windows (R) 2000 Operating System   5.50.4027.300
   ssleay32.dll   The OpenSSL Toolkit   0.9.8g
   tbb.dll   Threading Building Blocks   2, 1, 2009, 0201
   TfFontMgr.dll   FontMgr   9.3.0.113
   TfKernel.dll   Kernel   9.3.0.113
   TFKGEOM.dll   Kernel Geom   9.3.0.113
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
   updaternotifications.dll   Adobe Updater Notifications Library   2.0.0.15 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   2.0.0.15
   WRServices.dll   WRServices Thursday January 21 2010 12:13:3   Build 0.11423   0.11423
   wu3d.dll   U3D Writer   9.3.0.113
Installed plug-ins:
   3D Studio 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Accented Edges 12.0
   ADM 3.11x01
   Angled Strokes 12.0
   Average 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Bas Relief 12.0
   BMP 12.0.2
   Camera Raw 6.4.1
   Chalk & Charcoal 12.0
   Charcoal 12.0
   Chrome 12.0
   Cineon 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Clouds 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Collada 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Color Halftone 12.0.2
   Colored Pencil 12.0
   CompuServe GIF 12.0.2
   Contact Sheet II 12.0 (12.0x001)
   Conté Crayon 12.0
   Craquelure 12.0
   Crop and Straighten Photos 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Crop and Straighten Photos Filter 12.0.2
   Crosshatch 12.0
   Crystallize 12.0.2
   Cutout 12.0
   Dark Strokes 12.0
   De-Interlace 12.0.2
   Dicom 12.0
   Difference Clouds 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Diffuse Glow 12.0
   Displace 12.0.2
   Dry Brush 12.0
   Eazel Acquire 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Embed Watermark 4.0
   Entropy 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Extract 12.0 (12.0x001)
   Extrude 12.0.2
   FastCore Routines 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Fibers 12.0.2
   Film Grain 12.0
   Filter Gallery 12.0
   Fresco 12.0
   Glass 12.0
   Glowing Edges 12.0
   Google Earth 4 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Grain 12.0
   Graphic Pen 12.0
   Halftone Pattern 12.0
   HDRMergeUI 12.0
   Histogram 1, 0, 0, 0
   HistogramCurves 1, 0, 0, 0
   ICO (Windows Icon) NO VERSION
   IFF Format 12.0.2
   Ink Outlines 12.0
   JPEG 2000 2.0
   Kurtosis 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Lens Blur 12.0
   Lens Correction 12.0.2
   Lens Flare 12.0.2
   Lighting Effects 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Liquify 12.0.1
   Matlab Operation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Maximum 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Mean 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Measurement Core 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Median 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Mezzotint 12.0.2
   Minimum 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   MMXCore Routines 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Mosaic Tiles 12.0
   Multiprocessor Support 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Neon Glow 12.0
   Note Paper 12.0
   NTSC Colors 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Ocean Ripple 12.0
   OpenEXR 12.0.2
   Paint Daubs 12.0
   Palette Knife 12.0
   Patchwork 12.0
   Paths to Illustrator 12.0.2
   Pattern Maker 12.0 (12.0x001)
   PCX 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Photocopy 12.0
   PhotoKit 1, 2, 4, 0
   PhotoKit Capture Sharpener 1.2.6
   PhotoKit Capture Sharpener Expert 1.2.6
   PhotoKit Color 2 2, 0, 1, 0
   PhotoKit Creative Sharpener 1.2.6
   PhotoKit Output Sharpener 1.2.6
   PhotoKit Preview Helper 2.0
   PhotomergeUI 12.0 (12.0x001)
   Photoshop 3D Engine 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   PhotoTools 2.5 2.5.5
   PhotoTools 2.5 Batch 2.5.5
   PhotoTools 2.5 Hidden NO VERSION
   PhotoTools 2.5 Hidden NO VERSION
   Picture Package 12.0 (12.0x001)
   Picture Package Filter 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Pinch 12.0.2
   Pixar 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   PixelGenius Toolbox 2, 0, 0, 0
   Plaster 12.0
   Plastic Wrap 12.0
   PNG 12.0.2
   Pointillize 12.0.2
   Polar Coordinates 12.0.2
   Portable Bit Map 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Poster Edges 12.0
   Radial Blur 12.0.2
   Radiance 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Range 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Read Watermark 4.0
   Reticulation 12.0
   Ripple 12.0.2
   Rough Pastels 12.0
   Save for Web & Devices 12.0
   ScriptingSupport 12.1
   Send Video Preview to Device 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Shear 12.0.2
   Skewness 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Smart Blur 12.0.2
   Smudge Stick 12.0
   Solarize 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Spatter 12.0
   Spherize 12.0.2
   Sponge 12.0
   Sprayed Strokes 12.0
   Stained Glass 12.0
   Stamp 12.0
   Standard Deviation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Sumi-e 12.0
   Summation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Targa 12.0.2
   Texturizer 12.0
   Tiles 12.0.2
   Torn Edges 12.0
   Twirl 12.0.2
   U3D 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Underpainting 12.0
   Vanishing Point 12.0
   Variance 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Variations 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Video Preview 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Water Paper 12.0
   Watercolor 12.0
   Wave 12.0.2
   Wavefront|OBJ 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Web Photo Gallery 12.0 (12.0x001)
   WIA Support 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Wind 12.0.2
   Wireless Bitmap 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   ZigZag 12.0.2
Plug-ins that failed to load: NONE
Flash:
   onOne
   Mini Bridge
   Kuler
   Access CS Live
   CS Review
Installed TWAIN devices: NONE

no such subdirectory: C:\Program Files\Adobe\Adobe Photoshop CS5\Presets\SCRIPTS
Message was edited by: eliz926
ANSWER: out of the box installation on an XP Dell laptop resulted in NO installation errors but a missing subdirectory - or the in-application updates removed subdirectories.
re-installing the complete application installed the missing subdirectories.
hopefully those with the same error now have something to check on with their application directory structure. there is at least one other who has this error on a Mac.
thanks to all who responded.
e
Message was edited by: eliz926

I have adobe photoshop CS6 and I am trying to use the analysis tools but all of them except for the ruler tool are unavailable. Am I missing certain plug ins?

I have adobe photoshop CS6 and I am trying to use the analysis tools but all of them except for the ruler tool are unavailable. Am I missing certain plug ins?

Which operating system?
If I recall, some features were not fully supported on XP.
Nancy O.

CS3 Ruler Tool

According to Adobe Photoshop CS3 Classroom in a Book, there's a ruler tool hidden behind the Eyedropper tool. All I see are the Eyedropper tool, the Color sampler tool, and the Count tool.
I have Adobe Photoshop CS3 Extended, v10.0.1
How do I get the ruler tool?
Keith

> What's a count tool? Dracula maybe?
A very simple, basic new tool available in CS3 Extended only:
http://www.photoshopsupport.com/photoshop-cs3/video-tutorials/photoshop-cs3-count-tool.htm l
Regards
John Waller

Wierd Poly Lasso Tool problem

Hi, I just started using PS on Mac, and having a polygonal lasso tool problem, when I make any selected area with the poly lasso and complete the shape, say for instance a series of sun rays, it ends up with a bunch of boxes in the shape, that I didn't put there, I'll attach a screen shot, any idea what is going on?

Hi, yeah, i tried that, have there been any bugs that relate to the polygonal lasso tool?
heres a post with the same problem, but no fix- this seems really silly
http://forums.adobe.com/thread/495664?tstart=0

Is it possible to calibrate the ruler tool in centimeters?

I need to show specific ratios on the image, e.g., this distance is to this as that is to that. A measuring tool that works in pixels is pretty cumbersome. IS it possible to re-calibrate the ruler tool to measure in millimeters, centimetres, etc.? Pixels don't really make it for me. It seems like an obvious choice, but I can't figure out how to do it.

Thanks, guys. You were right. And thanks for coming up with it fast.

Brush Tool problems

I am having an ongoing problem with the Brush Tool in my PSE9.
I have the question written out in Word Pad but I can't seem to copy & paste it into this box. The 1st thing I need to know is how to copy & paste my simple text question here.
Bob

Barbara B.:
It has been several days since I heard anything from you on my ongoing Brush Tool problem. From your digging what have you found? In the past 10 days I have continued spotting B&W negative scans & trying to collect additional information on the propensity of the brush tool to create a line running across the image. Basically what I have found reinforces the 7 points/factors I outlined in posting #14 on 7/7/12. I'll go over & expand on those again here.
1) When the line runs it always goes from where I am currently spotting to some point I previously clicked & put a spot. This is not necessarily the most recent spot. It can travel to a spot I did 30 sec. ago (& have done several others in the interim). It does need to be on the visable portion of the screen.
2) As stated. The width of the line is the same as the width of the specific selected brush size. Usually between nos. 4 & 9. The tone of the line is the same as the tone selection (so far I have only experienced this with B&W).
3) The more I spot the slower the computer's reaction time becomes. After spotting for an hour, or two, I will see several seconds between the time I click on a spot & the time the spot actually appears on the negative. I have tried turning off PSE & rebooting it. This seems to speed things back up for a while.
4) When the situation in #3 occurs I obviously can't click rapidly.
5) I still don't understand why this happens at all. I move the curser outside of the image frame towards the Vert. & Horz. slider as I get ready to move to a new part of the image. I place the curser on the slider control a left click (as though to move the slider). Instead of moving the slider it shoots one of these lines out onto the image from under the slider control & out onto the image field to some point where there was a previous spotting click. These lines will often run half way across the image field. I have saved some of these examples & could attach them to an email for you to see.
6) Once one of these lines start appearing, or running, they seem to increase with frequency. Almost as though the software is developing a memory. As I say in #3, if I re boot PSE the memory either is erased, or at least reduced.
7) The only time the original statement is not totally true is when a line runs from under the slider (which is outside the viewing area) out into the visable image field.
Here are some additional factors I have noticed:
8) I normally begin spotting by setting the view drop down to "actual pixels". I notice that If I further magnify the image by then clicking once on the "zoom in" option I have a reduced frequency if these wild lines appearing. This may be due to the fact that when the image is larger I am working (stippling) at a slower rate.
9) If I have a hair or scratch on the neg. (normally using a drawn line to obliterate) & I use a stippling/clicking pattern rather than a drawn line the frequency or chance of a free running line is reduced - not eliminated, but reduced

Fast selection of the ruler tool?

Hi,
I often use the ruler tool. Its located below the eyedropper tools.
How can I bring up this tool to select it with one fast click - instead of long clicking at the eyedropper to wait the popping up the (sub)tools.
The shortcut "I" only selects the first of the tools.
Thanks,
Konrad

What version of photoshop?
In both the regular and extended versions of photoshop one can change the Keyboard shortcut for the Ruler Tool using Edit>Keyboard Shortcuts
Are you using an extended version of photoshop and if so which one?
For example in cs5 extended one can set a keyboard shortcut for the Ruler Tool through Edit>Keyboard Shortcuts.

Ruler Tool problem

Similar Messages

Maybe you are looking for