Rulers and Guides and Grids

Can anyone explain why or how to get guides and rulers and grids In Premier pro 5+ ? For me it would be a very usefull set of tools to have or is there any plugins to acheive this with ?
Any input would be greatly appreciated.

I also create custom Guides in Photoshop, and Import those PSD's for about the same use, as Ann's tip.
I will create those, especially for involved PiP situations, so that I can Scale & Position, to my "windows." This ARTICLE goes into a bit more detail.
Good luck,
Hunt

Similar Messages

Print Visible Grids and Guides

Hi everyone,
I'm using InDesign CS3 5.0.4, If i export to direct pdf the check box of Print visible grid and guides is enabled, But to make the postscript file the mentioned option is disabled.
Please guide me how to enable this option in the InDesign
Thanks and Regards,
Nagaraj

... I don't have a special profile. I almost never directly print, but Export to PDF exclusively. And if you use that instead, you can choose any of the standard presets -- High Quality, Press Quality, etc. -- no printer dependent settings.
The print options inside InDesign and Acrobat are (partly) optional, depending on the printer driver you happen to have installed.

Automatic grids and guides by percentage

Hi all,
I produce a high quantity of work to a predetermined template and have been looking at ways to automate parts of the process, particularly with regards to setting grids and guides. I believe that it should be possible, but seems to be well beyond my (very, very limited) scripting knowledge. The particular processes are as follows:
The first thing I do when I begin anew is to go into Preferences > Grids and enter a value equivalent to 1% of the grid width into the Horizontal field and 1% of the height into the Vertical field. I then set the subdivisions for each to 1, producing a grid with 100 rows and 100 columns of 1% of the total document size.
The next thing I do is to calculate 6% of the document width and enter that figure into the Left and Right fields of the Margins and Columns dialogue box, found in the Layout menu. I will also enter 1% of the document height into the Bottom field.
Through these two methods I arrive at a good starting point for my work. The sizes of the grids and guides differ with the document sizes, but are always the same percentages of the total size. This seems like something that InDesign scripting should be able to handle but I can't find any suitable scripts or even begin to get my head around how to create such a thing.
I'm using InDesign CC 2014. Furthermore, it doesn't matter if the margins are created with the Margins and Columns functionality or are just guides.
If anybody has any suggestions, or can even vaguely point me in a direction that might help me, it would be greatly appreciated.

Dear Dina,
Please give your valuable input for this query...
thanks a lot n advance...

Guides and Grids

To DPS Users,
Is there any way to show guide and grid lines on the iPad when using DPS to build folios.
Regards
Vividi

Not without drawing them yourself or using screenshots.
Why would you need/want this?

Permanently hide grids and guides

Hi
We use InCopy CS2 at our office. As a writer/editor I have no need to see the grids and guides, so have to turn them off every time I open InCopy. Is there a way to permanently make them go away?
Jay in Toronto

I don't have CS2 installed any longer, but check the View menu for these two things: Hide Frame Edges, and Grids & Guides > Hide Guides.

Guide and grid snapping going crazy - help!

I'm having real problems when snapping bezier paths to guides and grids. As you can see in the video, it seems to snap to SOMETHING, but not the grid or guide, it's driving me crazy. Even more annoying, sometimes it works perfectly. Anyone know what the heck is going on? I have turned off the "new" snapping feature and just checked "snap to guides" in the VIEW menu.
After Effects CC 2014 (latest)
OSX 10.9.5
Mac Pro 2013 (12 core)
Please help, I'm on a huge project that is pure shape layers, and not being able to snap to guides is a nightmare.
Thanks!
Rory.

Sorry, I cannot replicate your issue. I've tried having 8 shapes and masks and switching the pixel aspect ratio conversion on and off and switching the grid on and off and switching guides on and off and switching all of the snap functions in and out in various combinations.
A very long time ago, when grids were new, I had changed the color of the grid to white. when I started working on a white layer later in the project I was freaked out that the grid had malfunctioned but it had simply been made invisible by the user. I spent hours on the After Effects AOL forum before I figured it out. This is not related to your problem, clearly, but these things are often less weird than they seem.

Lost 3D guides and references for my video in different views

All of the sudden I can't turn on my 3D guides(X,Y,Z) and in top view I can't see any of my video references in order to move them around in the space.
I tried switching view,world and local mode, also grid and guide options.
Any suggestions?
Thanks

found it ... I had them off in my view options, I had a long week end.
Thanks anyway

Really? No guides and no alignment feature?

Am I missing something obvious or does this thing really not have alignment or guides?
Thanks

Guides as in you drag out a line from the top or side and it stays put and you can then move objects to that line. This is a basic feature that's missing. Typically, you show Rulers and then click and drag them out.
The Smart Guides are the ones that are in Apple's Motion (and many other apps now) where it automatically pops up a guide as you move objects around. FCP X has the screen centered smart guide, but that's it. Apple needs to implement Motion's method, because it's great.
I think those are two glaring omissions. It's weird that they put in the centering smart guide and then stopped.
If they add the Motion Smart Guides and fix the memory issue, and allow me to Optical Flow a reversed clip, I'd be a very happy camper.

Smart guides and snap to point not working in Adobe Illustrator CC 2014

Hello,
I am having a lot of issues with Illustrator CC 2014 and the Smart Guides. Every time I try and snap one object to another or snap an object to a guide, the object snaps either above or below the guide/object but never snaps correctly. This also happens when I am zoomed in all the way!
I do not have align to pixel grid or snap to grid turned on.

David,
I do not have align to pixel grid or snap to grid turned on
It sounds as if Illy thinks the former.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Misteryous Text and guides...!

I think I'm an experiencied user of illustrator but I have never seen this before, I made new from template in AI CS3 and choose "cd booklet_blank.ait" from the basic folder, and I saw that green texts and guides like rulers, unselectable, even with the layers hidden, they are still visible, so I went to Object/CropArea/Release and voilá...all guides and text dissapear.
My question is, any body see the same?
where that green text and guides came from?
How is this possble?
Thanks in advance

Aha...! Didnt' realize that tool was there....never used or needed..
Now I'm more experienced than before...
Thanks...!

Disable + and - symbols in grid

how can i disable + and - symbols in grid can any one tell me pls
Edited by: 991774 on Mar 5, 2013 10:38 PM

http://docs.oracle.com/cd/E28394_01/pt852pbh1/eng/psbooks/tapd/img/sm_BodyAreaRowActionButtonPropertiesSample_tapd.png
Row Action Buttons
Select to display Insert and Delete buttons on each grid row at runtime. The action buttons can appear on the left or right side of the grid. Click the Properties button to open the Body Area Row Action Button Properties dialog box.
http://docs.oracle.com/cd/E28394_01/pt852pbh1/eng/psbooks/tapd/img/sm_GridPropertiesUseTab_tapd.png
No Row Insert
Suppresses the Add button in the body area so that the user cannot insert rows. If this option is selected, PeopleSoft Application Designer automatically selects and disables the Invisible check box on the Insert tab of the properties dialog box for the body area.
No Row Delete
Suppresses the Delete button in the body area so that the user cannot delete rows. If this option is selected, PeopleSoft Application Designer automatically selects and disables the Invisible check box on the Delete tab of the properties dialog box for the body area.
More detail to be found in PeopleBooks > PeopleTools 8.52: PeopleSoft Application Designer Developer's Guide > Using Scroll Areas, Scroll Bars, and Grids

Hi. I have a Dell PC running Windows 7 64 bit. I have the latest version of Adobe Reader, It worked yesterday. Today I have job training to do that is due tomorrow morning and I can't open PDF files. I have to open a guide and read it and take a test

Hi. I have a Dell PC running Windows 7 64 bit. I have the latest version of Adobe Reader, It worked yesterday. Today I have job training to do that is due tomorrow morning and I can't open PDF files. I have to open a guide and read it and take a test tomorrow. I have deleted and reinstalled the application. I have rebooted. I have made sure my PDF's are associated with the program. Every PDF on my computer won't open and I get the same error message. It simply says Attempt to access invalid address. How can I fix this? Thanks.

Hi Don,
I have seen this issue fixed for some users by modifying the following registry key:
The key is "HKLM\System\CurrentControlSet\Control\Session Manager\Memory Management" MoveImages
Set the key to 1 instead of 0 then reboot the machine.
In case you still face the issue try the following registry key change:
The only thing you have to do is rename the following key at the REGEDIT, and everything will be fine !!
BEFORE:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.exe
AFTER:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.old
Note: Please take a backup of the registry before attempting this change.
Regards,
Rave

I am still using my Apple G4 1.25 Ghz MDD running Leopard 10.5.8 with iTunes 10.6.3 installed. Can I use an Phone 4s with iOS 5 with this set up? I have read the iPhone iOS 5 user guide and it appears that I can but is anybody actually doing it ?

Hello to all my readers.I am still using my Apple G4 1.25 Ghz MDD running Leopard 10.5.8 with iTunes 10.6.3 installed. Can I use an Phone 4s with iOS 5 with this set up? I have read the iPhone iOS 5 user guide and it appears that I can but is anybody actually doing it ? My current phone is a £10 Nokia and I've neither wish nor cash to spend more than a grand upgrading to an intel based machine (at the moment) ! Regards to you all.

If you can find an iPhone running iOS5 and those are the specs for iOS5, there is no reason it should not work.
If you want a more current version of iOS or a more current device, a Windows computer is always an option at significantly less cost.
Granted, there is no requirement to have a computer to use an iPhone.

Zero Out All Data and GUID

I'm just formatting a second hard drive for backup purposes. I've decided I want to zero out all data to ensure that the drive maps out bad blocks, and then I'm going to create a GUID partition just in case I decide to make it a boot drive in future.
Three questions:
Why doesn't Disk Utility give you the option of Zero Out All Data and GUID partition as a 'one stop shop'?
Is there any disadvantage to having a GUID partition on a backup drive?
Are any remapped bad blocks found during the zeroing process retained after the GUID partition erase?

Zeroing and GUID don't always go together. AIUI, GUID is only compulsory for a boot partition for Intel Macs; and it is recommended for volumes used by Time Machine. Otherwise, Apple Partition Map will usually be required since it can be read by both Intel and PowerPC Macs.
The disadvantage to having a GUID partition is that it won't be readable by PowerPC Macs.
Simon

I am stuck in guided access and I don't remember my password. How do I get out of it without losing all of my picture and apps and such?

I am stuck in guided access and I don't remember my password. How do I get out of it without losing all of my picture and apps and such?

Connect the iPod to its syncing computer and restore via iTunes. If the iPod asks for the passcode and you can't enter the passcode or if you do not have the syncing computer, place the iPod in recovery mode and then restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore

Rulers and Guides and Grids

Similar Messages

Maybe you are looking for