Rules and Schemas -
Dear Gurus,
Do you know any command so I can use inside a payroll rule, to find if the employee works for more or less than an year in the company?
A friend told me that this command should do that: NUM=F01C
But it returns a strange value...
Can anyone please help me?
Regards,
PC
Hi,
I am not sure about IT 0016, but F* operation using NUM you have following options. Maybe they will be helpful.
A, B First entry from infotype 0000
C Last entry, or reentry
D Last change of individual working time from infotype 0041. In table T530, if the field KUNBZ (indicator for irregular payments) is 05, then the start date of the work center is taken for D.
E Last change of capacity utilization level from infotype 0008
F Last change of weekly working hours from infotype 0007. A comparison is carried out with date type C for the date types D, E and F. If the value determined for C is greater than the values determined for D, E or F (that is, a later date), the value of C is used for D, E or F. Any changes in the capacity utilization level or the like before the last reentry are not evaluated. The date of the last reentry is taken instead of this date.
G Birth date from infotype 0002
W Reentry. The last reentry date is entered in this date specification. If no reentry data exists, the initial entry date is used. This date has the short name 'A' in the evaluation.
X Employee leaves after the end of the period in accordance with infotype 0000. The system checks whether there is a record for infotype 0000 (Actions) has a record where the Stat2 field has the value 0 (= left). The start date (BEGDA) of this record is the leaving date. This date type always has an entry. If an employee leaves after the end of the period in question, this date will be used. If no leaving date exists, the date December 12, 9999 is used.
Z Leaving before the end of the period in accordance with infotype 0000 The system checks whether there is a record for 0000 (Actions) where the Stat2 field has the value 0 (= left). The start date (BEGDA) of this record is the leaving date. This date type always has an entry. If an employee leaves before the period in question, this date is used. If no date is given, the date December 31, 9999 is used.
Cheers
Similar Messages
-
Hi,
Anyone of you have a manual or instructions of HR rules and schemas?
ThanksHi,
if you hven't done yet please visit
rules
http://help.sap.com/erp2005_ehp_02/helpdata/en/4f/d51fb2575e11d189270000e8322f96/frameset.htm
schemas:
http://help.sap.com/erp2005_ehp_02/helpdata/en/4f/d51ca1575e11d189270000e8322f96/frameset.htm
Regards
Bernd -
Any body help me How do we config PCR rules in SCHEMAS.can any body tell me in deep or with Screen shots.
Thanks & Regards
SrinivasHi Srini
I would be happy to share a useful doc that tell What Payroll Functions and Operations are doing and how to read rules and schemas..
it was posted by biswajit das What Payroll Functions and Operations are doing?
Biswajit Das
Business Card
Company: www.tcs.com
Posted on Oct. 20, 2006 09:09 AM in ABAP
i quite see yur contact mail in buss card..could u emal me and wil be happy to share it..
infact kndly igmore it ,its the document siki mate has sent you...i quite dint chk that..
No Worries
Karthik
Edited by: SAPenjoy:) on May 11, 2009 8:41 AM -
What are the steps are Shared services backup and schema back
Hi
I am new in Hyperion .. can anybody tell me what are the steps are in the shared services back up and schema back up ...
Regards
PraetorianIf it is fora a demo i would advise you to extract all the files (metadata, Rule, Security, Data forms, Grids, ICP reports, Data etc) so that this can be restored on any machine from which you wish to give demo.
If you which to take database backup it will take backup of all the HFM applications in that server. And when you restore the backup it will refresh all the applications which might result in changes to other applications which you may not want.
For taking backup of database/schema go to the udl file and identify the schema for which you wish to take backup.
Then type the command to take DB backup.
Kindly mark the post helpful if you find so.
Varun
Edited by: Varun Kaushal on Apr 24, 2010 9:37 AM -
Unable to find Transfer Rules and Data Source for 0PERSON Info Source
Hi,
I'am working on SALES ANALYSIS Configuration with the help of SAP Best Practices.
I'am trying to load Master Data Attributes/Texts/Hierarchies.
I'am able to load for allmost all the InfoPackages which i created for particular DataSource.
Now i need to load master data for 0PERSON InfoObject under that Person (Attributes) and Person (texts) are there,for this 2 Transfer Rules and the DataSource has to be defined by default as it is defined for other Attributes/Texts/Hierarchies.But i'am unable to find a DataSource and Transfer Rules to create a infopackage for PERSON Attributes and Texts.
Please gudie me with a solution in order to get these Transfer Rules and DataSource for this Attributes and Texts.
With regards,
Pradeep.BHi,
Install the corresponding master data objects from Business content. Go to data source find out the needed datasource, replicate it. If you want you can migrate it also.
If still you are not getting 0person masterdata object datasource & transformation structure, then you have to create the transformation, Infopackage.
Hope if you will install the business content again, it will solve your problem. -
Set up rule and lost mail!
I thought I was doing a 'good' thing when I set up a rule in Mail that said if the email address does not contain my exact email address, please move it to the junk folder. I set it up for both my cable company's email address and for my Mac address. Went back into Mail- all messages gone from both accounts!! Wiped out. So I went back into Rules and removed both rules. The Mac mail reappeared but my cable company emails did NOT reappear. Now I can probably recover them cuz I back up every morning but since the backup this morning, of course I have gotten some emails which did not get backed up. What happened?! Where did they go? Can I get them back? Ugh! Judy
I tried rebuilding the mailbox and that didn't help. Judy
-
Anybody here knows the difference between Business Rules and BPM..
We can do pretty much everything with a Business Rules Engine as we would do with BPM , then in which scenario should we use BPM and in which scenario should we use Business Rules Engine?
Ofcourse Business Rules Engine has more complex set of rules than any BPM product in the market for .eg. ILOG Business Rules...BPM and a rules engine are different. Both are important, but they have different uses.
Oracle BPM Studio is used by Business Analysts and Developers to model processes, integrate underlying components (including business rules) and develop user interfaces.
There's an Engine that executes the processes that have been modeled. It sends the work item instances to the right person or persons with the right data when the work item reaches an interactive activity in the process. Similarly the Engine has invokes the underlying components specified in the process when the work item instance reaches an automatic activity.
There's an out of the box Workspace runtime that lets end users manage and run their work item instances as they flow throughout the processes.
We can business rules inside the processes, but one does not replace the other.
Dan -
Problem with balance carry forward business rule and automatic adjustments
Hi All,
I faced with issue when run BCF business rule and consolidation process. According sap courses BPC440 members with A(automatic adjustments) type should carry forward automatically, and I(imputable), M (adjustments) members should carry forwarded by bcf business rule.
When I set up my BCF business rule I use property "Category_for_ope" in Category dimension. But this rule not work properly, then I use notes:
1784365 - Category_for_ope property should not effect Consolidation.
1902677 - The property category_for_ope shall work for consolidation
After applying those notes, system work as I aspect. After i run consolidation first time system carry forward my automatic adjustment from Category "Expected" to "PLAN_Y0" and this is correct!!!. But when i run consolidation process second and third time system duplicated automatic adjustments in Category "PLAN_Y0".
Someone can help me with this Issue?
And sorry for my englishHi,
Can you try as follows :
*RUN_PROGRAM COPYOPENING
CATEGORY = %C_CATEGORY_SET%
CURRENCY = %RPTCURRENCY_SET%
TID_RA = %TIME_SET%
*ENDRUN_PROGRAM
hope it helps...
regards,
Raju -
Sourcing Rules and Approved Supplier List in 11.5.10
Does anybody know:
Is it possible to default supplier information (and additionally source document information) into requisition and purchase order using sourcing rules and ASL for services, using only category and not item numbers?
Thanks,
LeonieHi;
I suggest check those information(column name, integrty etc) from e-trm site
Regard
Helios -
In a pages document can I copy a ruler and apply it to text elsewhere in the document
While working in a pages document can I copy a ruler and apply it to text elsewhere in the document? I'm using Pages '09, Version 4.1 (923), on a MacBookPro with OS X, version 10.6.8. I've tried pages help, but I haven't found an answer to this question.
click in the text you wish to copy from > Menu > Format > Copy Paragraph style > click in the text you wish to copy to > Paste Paragraph Style
The keyboard shortcuts are option command c and option command v
You can also Copy/Paste Character Styles.
Better to create real Styles in the Styles Drawer. Using the above method is slower and will lead to inconsistent styles that you can not universally correct or change.
Peter -
Document on XML date rules and date management
Hi,
Could you Please send a document on XML date rules and date management. I really in need of it. You may send it to [email protected]Hello
Could you please email this to me: [email protected]
Thanks in advance
Kevin -
How to use rules and roles in workflow?
Hi experts,
I am a beginner in workflow. Could any one tell me how to use rules and roles in workflow ?
Can u pls tell me the steps to follow?
and more over what are all the <b>important things</b> we have to learn in workflow module ??
I shall be thankful to u.
Thanks
umaHi
Workflow automates the steps and activities in a business process according to predefined procedures and rules.
Workflow presents information and documents to the appropriate knowledge worker or agent (another entity such as a program) to make a decision or perform an activity.
Workflow tracks each and every step in the process flow and maintains an ongoing status.
Workflow also collects and reports all of the metrics associated with the execution and completion of the process.
Check the below links u will get lot of info..
http://www.sap-press.com/product.cfm?account=&product=H950
Workflow
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
Go through the following links on FORK :
http://help.sap.com/saphelp_nw04/helpdata/en/24/e2283f2bbad036e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/8d/25f1e7454311d189430000e829fbbd/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/en/c5/e4a930453d11d189430000e829fbbd/content.htm
http://www.insightcp.com/res_23.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSTART/BCBMTWFMSTART.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMDEMO/BCBMTWFMDEMO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPM/BCBMTWFMPM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
For more reference on workflow: http://****************/Tutorials/Workflow/Workflow.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/04/9277a346f311d189470000e829fbbd/frameset.htm
Check these links.
http://www.sapgenie.com/workflow/index.htm
/people/ginger.gatling/blog/2005/12/01/link-workflow-business-objects-to-your-collaboration-tasks
http://help.sap.com/saphelp_nw04/helpdata/en/92/bc26a6ec2b11d2b4b5006094b9ea0d/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/92/bc26a6ec2b11d2b4b5006094b9ea0d/content.htm
http://help.sap.com/saphelp_bw31/helpdata/en/8d/25f94b454311d189430000e829fbbd/content.htm
http://www.sap-press.com/product.cfm?account=&product=H950
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
Workflow
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
Workflow tutorials with step-by-step and with screenshots are available at http://www.****************/Tutorials/Workflow/Workflow.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/42/c14a9b55103116e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/e4a930453d11d189430000e829fbbd/frameset.htm
http://www.sapgenie.com/workflow/
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2857887
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2855919
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2735228
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSTART/BCBMTWFMSTART.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMDEMO/BCBMTWFMDEMO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPM/BCBMTWFMPM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
Debug a workflow.
This has a step by step procedure :
http://fuller.mit.edu/workflow/debugging.pdf
www.erpgenie.com/sap/workflow/debugging.htm
http://www.erpgenie.com/workflow/debugging.htm?2b5de440
Workflow tutorials with step-by-step and with screenshots are available at
http://www.****************/Tutorials/Workflow/Workflow.htm
http://www.sapgenie.com/workflow/
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2857887
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2855919
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2735228
http://www.sapbrain.com/TUTORIALS/TECHNICAL/WORKFLOW_tutorial.html
Regarding Work Flow
work flow scenarios.
1. applying for a leave.
2. approval process.
3. material creation process.
4. mainly work flow is for notification purpose.
chk this links
http://help.sap.com/saphelp_erp2005/helpdata/en/fb/135962457311d189440000e829fbbd/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/c5/e4a930453d11d189430000e829fbbd/frameset.htm
Workflow
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
http://www.erpgenie.com/workflow/index.htm
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
http://www.insightcp.com/res_23.htm
A good tutorial
http://www.thespot4sap.com/articles/Invoice_Verification_Automation_Using_SAP_Workflow.asp
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
/people/alan.rickayzen/blog
/people/jocelyn.dart/blog/2006/06/19/why-use-abap-oo-with-workflow
a good book
http://www.sap-press.com/product.cfm?account=&product=H950
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.sap-press.com/downloads/h950_preview.pdf
Check the following PDF
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSTART/BCBMTWFMSTART.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMDEMO/BCBMTWFMDEMO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPM/BCBMTWFMPM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
also seach the workflow forum: SAP Business Workflow
Regards
Anji -
Synchronizing rules and signatures in an IMAP account?
Hi,
I have several rules in Mail that control where emails from certain people are stored. How do I apply these rules to my IMAP account so that when I login through my browser based webmail interface, I see an identical file structure?
Also, how do I use signatures if I'm not checking email through Mail. Is this possible?
Thank you!neither of these is possible. Mail rules and signatures are stored locally and are only usable in Mail.app.
-
My mail rules and signatures just disappeared. (OS 10.9.2)
All of my mail rules and signatures just disappeared. What happened and how can I retrieve them?
Hello Yeomans7,
Thank you for using Apple Support Communities.
For more information, take a look at:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Have a nice day,
Mario -
Is it possible to sort Mac Mail Rules into alphabetical order? I have in excess of 50 rules and everytime I want to add or amend a rule, such as "delete incoming" I have to go through the entire list to find it. I have tried clicking on the heading "Description" but it does not sort. Any assistance would be greatly appreciated
Hi,
According to your description, my understanding is that use CMAK to configure split tunneling on VPN clients, traffic to specified devices can be routed via their own default gateway.
If the manually added route entries all have default metric and interface, clients will select one by the default routing rule, can’t select one of them according to clients’ own conditions. So, I am afraid that CMAK can’t implement the function which you need.
A blog described about How to configure split tunneling on VPN clients using CMAK, for your reference:
http://blogs.technet.com/b/rrasblog/archive/2007/06/11/split-tunnelling-using-cmak.aspx
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Maybe you are looking for
-
I have a windows server 2012 Hyper V machine which acts as a web front end for my sharepoint 2013 farm. It is set to install updates automatically. I have 4 patch to install to correct an issue with my search: KB 2567680, KB 2554876 , KB 2708075 , K
-
Can't get sound w/ AppleTV?
Set up Apple TV based on directions using HDMI to Samsung and Digital Optical Cable to Denon receiver. Have video feed but not audio. Have audio from other sources (Direct TV) but don't have audio from Apple TV?
-
I want to deploy an application I have built along with the JRE it seems creating a JAR file is the way to go. Could somebody confirm this & advise of any other steps that I will need to take along the way. Please take it very SLOWLY and omit nothing
-
[10.5] ssh starts X11.app
Good morning, Strange behaviour on a system with a new installation of leopard: every time I try to connect to any remote host by ssh (under Terminal.app), X11.app starts. I'm still trying to find why, and already checked the .bashrc, .profile, etc.
-
Mysql database moving it to my webserver
Hi I wonder if some one could help me with moving my Dreamweaver CS4 .php files from my local machine to my webserver. I have set up wamp as my localhost and have started to develop my database and webpages on my local machine, I am now at the point