Rules and VBscripts

Hi,
I would like to ask,
When creating a rule in SCOM,
with
The Data Source AS Microsoft.Windows.EventProvider
and the
Actions with a Microsoft.Windows.ScriptWriteAction
capturing the data with a script to send out info based upon the Alert picked up.
The reason I am asking is I want to capture the event 4625, and let the script determine who the owner is on the Account and then send them an email, as this would only be used for service accounts being locked.
I have seen this work before with group membership changes,
I would just like to know if it creates the script against the rule or will the script be executed against the Eventlog on the server?
Any assistance will do?

Hi,
Yes, I think you can make it achieve. Here is a similar post.
http://social.technet.microsoft.com/Forums/systemcenter/en-US/6236016b-95dc-4c26-86a4-d05a83174d61/run-script-in-response-to-an-event-detection?forum=operationsmanagerauthoring
Niki Han
TechNet Community Support

Similar Messages

Unable to find Transfer Rules and Data Source for 0PERSON Info Source

Hi,
I'am working on SALES ANALYSIS Configuration with the help of SAP Best Practices.
I'am trying to load Master Data Attributes/Texts/Hierarchies.
I'am able to load for allmost all the InfoPackages which i created for particular DataSource.
Now i need to load master data for 0PERSON InfoObject under that Person (Attributes) and Person (texts) are there,for this 2 Transfer Rules and the DataSource has to be defined by default as it is defined for other Attributes/Texts/Hierarchies.But i'am unable to find a DataSource and Transfer Rules to create a infopackage for PERSON Attributes and Texts.
Please gudie me with a solution in order to get these Transfer Rules and DataSource for this Attributes and Texts.
With regards,
Pradeep.B

Hi,
Install the corresponding master data objects from Business content. Go to data source find out the needed datasource, replicate it. If you want you can migrate it also.
If still you are not getting 0person masterdata object datasource & transformation structure, then you have to create the transformation, Infopackage.
Hope if you will install the business content again, it will solve your problem.

Set up rule and lost mail!

I thought I was doing a 'good' thing when I set up a rule in Mail that said if the email address does not contain my exact email address, please move it to the junk folder. I set it up for both my cable company's email address and for my Mac address. Went back into Mail- all messages gone from both accounts!! Wiped out. So I went back into Rules and removed both rules. The Mac mail reappeared but my cable company emails did NOT reappear. Now I can probably recover them cuz I back up every morning but since the backup this morning, of course I have gotten some emails which did not get backed up. What happened?! Where did they go? Can I get them back? Ugh! Judy

I tried rebuilding the mailbox and that didn't help. Judy

Business Rules and BPM

Anybody here knows the difference between Business Rules and BPM..
We can do pretty much everything with a Business Rules Engine as we would do with BPM , then in which scenario should we use BPM and in which scenario should we use Business Rules Engine?
Ofcourse Business Rules Engine has more complex set of rules than any BPM product in the market for .eg. ILOG Business Rules...

BPM and a rules engine are different. Both are important, but they have different uses.
Oracle BPM Studio is used by Business Analysts and Developers to model processes, integrate underlying components (including business rules) and develop user interfaces.
There's an Engine that executes the processes that have been modeled. It sends the work item instances to the right person or persons with the right data when the work item reaches an interactive activity in the process. Similarly the Engine has invokes the underlying components specified in the process when the work item instance reaches an automatic activity.
There's an out of the box Workspace runtime that lets end users manage and run their work item instances as they flow throughout the processes.
We can business rules inside the processes, but one does not replace the other.
Dan

Problem with balance carry forward business rule and automatic adjustments

Hi All,
I faced with issue when run BCF business rule and consolidation process. According sap courses BPC440 members with A(automatic adjustments) type should carry forward automatically, and I(imputable), M (adjustments) members should carry forwarded by bcf business rule.
When I set up my BCF business rule I use property "Category_for_ope" in Category dimension. But this rule not work properly, then I use notes:
1784365 - Category_for_ope property should not effect Consolidation.
1902677 - The property category_for_ope shall work for consolidation
After applying those notes, system work as I aspect. After i run consolidation first time system carry forward my automatic adjustment from Category "Expected" to "PLAN_Y0" and this is correct!!!. But when i run consolidation process second and third time system duplicated automatic adjustments in Category "PLAN_Y0".
Someone can help me with this Issue?
And sorry for my english

Hi,
Can you try as follows :
*RUN_PROGRAM COPYOPENING
CATEGORY = %C_CATEGORY_SET%
CURRENCY = %RPTCURRENCY_SET%
TID_RA = %TIME_SET%
*ENDRUN_PROGRAM
hope it helps...
regards,
Raju

Sourcing Rules and Approved Supplier List in 11.5.10

Does anybody know:
Is it possible to default supplier information (and additionally source document information) into requisition and purchase order using sourcing rules and ASL for services, using only category and not item numbers?
Thanks,
Leonie

Hi;
I suggest check those information(column name, integrty etc) from e-trm site
Regard
Helios

In a pages document can I copy a ruler and apply it to text elsewhere in the document

While working in a pages document can I copy a ruler and apply it to text elsewhere in the document? I'm using Pages '09, Version 4.1 (923), on a MacBookPro with OS X, version 10.6.8. I've tried pages help, but I haven't found an answer to this question.

click in the text you wish to copy from > Menu > Format > Copy Paragraph style > click in the text you wish to copy to > Paste Paragraph Style
The keyboard shortcuts are option command c and option command v
You can also Copy/Paste Character Styles.
Better to create real Styles in the Styles Drawer. Using the above method is slower and will lead to inconsistent styles that you can not universally correct or change.
Peter

Document on XML date rules and date management

Hi,
Could you Please send a document on XML date rules and date management. I really in need of it. You may send it to [email protected]

Hello
Could you please email this to me: [email protected]
Thanks in advance
Kevin

How to use rules and roles in workflow?

Hi experts,
I am a beginner in workflow. Could any one tell me how to use rules and roles in workflow ?
Can u pls tell me the steps to follow?
and more over what are all the <b>important things</b> we have to learn in workflow module ??
I shall be thankful to u.
Thanks
uma

Hi
Workflow automates the steps and activities in a business process according to predefined procedures and rules.
Workflow presents information and documents to the appropriate knowledge worker or agent (another entity such as a program) to make a decision or perform an activity.
Workflow tracks each and every step in the process flow and maintains an ongoing status.
Workflow also collects and reports all of the metrics associated with the execution and completion of the process.
Check the below links u will get lot of info..
http://www.sap-press.com/product.cfm?account=&product=H950
Workflow
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
Go through the following links on FORK :
http://help.sap.com/saphelp_nw04/helpdata/en/24/e2283f2bbad036e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/8d/25f1e7454311d189430000e829fbbd/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/en/c5/e4a930453d11d189430000e829fbbd/content.htm
http://www.insightcp.com/res_23.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSTART/BCBMTWFMSTART.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMDEMO/BCBMTWFMDEMO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPM/BCBMTWFMPM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
For more reference on workflow: http://****************/Tutorials/Workflow/Workflow.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/04/9277a346f311d189470000e829fbbd/frameset.htm
Check these links.
http://www.sapgenie.com/workflow/index.htm
/people/ginger.gatling/blog/2005/12/01/link-workflow-business-objects-to-your-collaboration-tasks
http://help.sap.com/saphelp_nw04/helpdata/en/92/bc26a6ec2b11d2b4b5006094b9ea0d/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/92/bc26a6ec2b11d2b4b5006094b9ea0d/content.htm
http://help.sap.com/saphelp_bw31/helpdata/en/8d/25f94b454311d189430000e829fbbd/content.htm
http://www.sap-press.com/product.cfm?account=&product=H950
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
Workflow
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
Workflow tutorials with step-by-step and with screenshots are available at http://www.****************/Tutorials/Workflow/Workflow.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/42/c14a9b55103116e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/e4a930453d11d189430000e829fbbd/frameset.htm
http://www.sapgenie.com/workflow/
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2857887
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2855919
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2735228
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSTART/BCBMTWFMSTART.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMDEMO/BCBMTWFMDEMO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPM/BCBMTWFMPM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
Debug a workflow.
This has a step by step procedure :
http://fuller.mit.edu/workflow/debugging.pdf
www.erpgenie.com/sap/workflow/debugging.htm
http://www.erpgenie.com/workflow/debugging.htm?2b5de440
Workflow tutorials with step-by-step and with screenshots are available at
http://www.****************/Tutorials/Workflow/Workflow.htm
http://www.sapgenie.com/workflow/
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2857887
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2855919
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2735228
http://www.sapbrain.com/TUTORIALS/TECHNICAL/WORKFLOW_tutorial.html
Regarding Work Flow
work flow scenarios.
1. applying for a leave.
2. approval process.
3. material creation process.
4. mainly work flow is for notification purpose.
chk this links
http://help.sap.com/saphelp_erp2005/helpdata/en/fb/135962457311d189440000e829fbbd/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/c5/e4a930453d11d189430000e829fbbd/frameset.htm
Workflow
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
http://www.erpgenie.com/workflow/index.htm
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
http://www.insightcp.com/res_23.htm
A good tutorial
http://www.thespot4sap.com/articles/Invoice_Verification_Automation_Using_SAP_Workflow.asp
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
/people/alan.rickayzen/blog
/people/jocelyn.dart/blog/2006/06/19/why-use-abap-oo-with-workflow
a good book
http://www.sap-press.com/product.cfm?account=&product=H950
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.sap-press.com/downloads/h950_preview.pdf
Check the following PDF
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSTART/BCBMTWFMSTART.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMDEMO/BCBMTWFMDEMO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPM/BCBMTWFMPM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
also seach the workflow forum: SAP Business Workflow
Regards
Anji

Synchronizing rules and signatures in an IMAP account?

Hi,
I have several rules in Mail that control where emails from certain people are stored. How do I apply these rules to my IMAP account so that when I login through my browser based webmail interface, I see an identical file structure?
Also, how do I use signatures if I'm not checking email through Mail. Is this possible?
Thank you!

neither of these is possible. Mail rules and signatures are stored locally and are only usable in Mail.app.

My mail rules and signatures just disappeared. (OS 10.9.2)

All of my mail rules and signatures just disappeared. What happened and how can I retrieve them?

Hello Yeomans7,
Thank you for using Apple Support Communities.
For more information, take a look at:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Have a nice day,
Mario

Is it possible to sort Mac Mail Rules into alphabetical order? I have in excess of 50 rules and everytime I want to add to a rule, such as "delete incoming" I have to go through the entire list to find it.

Is it possible to sort Mac Mail Rules into alphabetical order? I have in excess of 50 rules and everytime I want to add or amend a rule, such as "delete incoming" I have to go through the entire list to find it. I have tried clicking on the heading "Description" but it does not sort. Any assistance would be greatly appreciated

Hi,
According to your description, my understanding is that use CMAK to configure split tunneling on VPN clients, traffic to specified devices can be routed via their own default gateway.
If the manually added route entries all have default metric and interface, clients will select one by the default routing rule, can’t select one of them according to clients’ own conditions. So, I am afraid that CMAK can’t implement the function which you need.
A blog described about How to configure split tunneling on VPN clients using CMAK, for your reference:
http://blogs.technet.com/b/rrasblog/archive/2007/06/11/split-tunnelling-using-cmak.aspx
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Process rule and provisioning workflow problem

Hi,
we have designed a workflow to provision groups from a database resource to ldap and AD resources. We use the process rule in the activesync process. These groups creation
works without problem now, but the update/creation of users from database don't work. In my workflow I try to use the workflow services provision and reprovision, the result it's ok, but nothing is updated in my AD and ldap.
I have read in an old post that, in the process rule, the activesync offer a user view variable, but I don't receive nothing, and then I need to do a getview and then pass this view to the
reprovision rule. This don't work.
how is the correct process to reprovision from a process rule, and when we need to create a new user, from where I could get a userview for the provision process?
Thanks

Why do your supervisor start giving you such works until they don't give some trainings on IDM to you ?
Need Approval process workflow?
Re: Approval Process
Forum is for Freshers too but people are using it for just completing their project not for learning/sharing.

Item Category Completion rule and Copy Control for contract reference

Hi
We are creating sales document wrt contract. The item category completion rule for item category WVN is C i.e. item is completed after target quantity is fully referenced.
We dont want to change this but we want that even if the target quantity is fully referenced one particular type of sales document should still be allowed to be created with reference to this contract.
Please guide how can I achieve this.
Thank You
Brajendra Shrivastava

Hi
Is it possible to remove the item category completion rule and then restrict one particular document type or item category for only one time reference . In other words to apply completion rule at document type or tiem category level.

Rogue Rules and Rogue AP alert in Prime

Hi Supportcommunity,
i have done a lot of research according this topic but i was unfortunately unable to find an helpful post.
If i missed something I am sorry about.
I got the following issue my customer complains about Rogue AP Alerts in Cisco Prime.
There are always many of them.
I already configured the Rogue Rules at the WLC´s security tab as follows.
Here are the rules in detail.
1st rule
2nd rule
3rd rule
Could you please help me to understand what I did wrong.
I dont understand why there are still so many Rogue warnings although I configure it to not alert.
Thanks for your support
With kind regards
Benedikt

Rogue detection is a way of being aware of other APs in your surroundings, I would not advise on turning the SNMP traps off totally. On the other hand the customer cant really blame you because there are other APs around their network? In 99,9% of all networks there will be....
However, if you want to tidy up among the rogue alarms, the rules can be used.
What your rules are saying is "Anyone except me using my SSIDs? - mark it as a Bad Guy" (OK).
Then it gets a bit weird to me, lets do a short one on Signal strength:
- 30 dBm = Less than one meter from the AP at max European output level 20 dBm EIRP
-40 dBm = Ten times weaker, some 2-4m from AP. All distances are roughly speaking...
-50 dBm = 1/100 weaker, less than 10m from AP
-60 dBm = 1/1000 weaker, some 16m from AP, a "normal" and strong signal
-70 dBm = 1/10000, within 30m from AP, not great, but lower end of "normal" span
-80 dBm = hardly useable signal, might be able to connect @ 1-2 Mbps, not much more
-90 dBm = almost no clients can use this weak levels
-100 dBm = background noise.
You delete rule says that "Any other AP located less than a meter from mine (-30 dBm) should be marked as Malicious and deleted". Lower this to, say -70 dBm and see what happens.
Also note that the order of the rules can be important. It runs from top down, and as far as I remember the last one that matched determines if it is Friendly or Malicious. Play around with the levels first, then if necessary the order of the rules, and get back...
**Please rate helpful posts**

Rules and VBscripts

Similar Messages

Maybe you are looking for