Rules List Too Long and Runs off the Bottom of the Screen

... this means the Cancel, OK and folder selector are all missing. I have a large screen and even though I've added many into a list still it runs out of view and off the screen...
Any ideas how to limit the height?

I had this problem too. The only workaround I found was to limit the number of entries per rule. That means I have several rules that are divided Part 1, Part 2, etc.
Would love to know if there is a better workaround, but I haven't found it yet.

Similar Messages

My ipod password is too long and has 1 more number to the password and my ipod says ipod is disabled connect to itunes. i do i get get into my ipod?

i need to fix this problem if any body who nows how to fix it please help me

Connect the iOS device to your computer and restore via iTunes. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

A document page opens that is too big for the display and runs off the end of the monitor

How do you fix a problem where document pages open that are too big for the display and runs off the end of the monitor? The borders are off the monitor so there is no window edge to grab and adjust.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

My iPod was updating to iOS 6 and i shut it off during the update because it was taking too long and now my screen in baby blue i've tried to drain the battery but when i plugged it in to charge the blue screen came back on.I dont know what to do

My iPod was updating to iOS 6 and i shut it off during the update because it was taking too long and now my screen in baby blue i've tried to drain the battery but when i plugged it in to charge the blue screen came back on.I dont know what to do

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

I recently updated to ios5.0.1 and was syncing my itouch.I noticed that it was tking too long and my itouch turned off. now, i can't turn it on.went online and tried everything but nothing works. HELP PLEASE!

I recently updated to ios5.0.1 and was syncing my itouch.I noticed that it was taking too long and my itouch turned off. now, i can't turn it on.went online and tried everything from the troubleshooting assistant but nothing works. HELP PLEASE!

Have yu tried everthing here:
iOS: Not responding or does not turn on
Next see if placing the iPod in DFU mode will allow iTunes to see the iPod so you can restore the iPod.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Last, make an appointment a the Genius Bar of an Apple stroe.

HT201274 i tried to erase all content and reset settings from the device option.it is taking too long and its been 15 hours but not yet done.its showing a skeleton sigh with buffering and sometimes flipping to apple sign.

i tried to erase all content and reset settings from the device option.it is taking too long and its been 15 hours but not yet done.its showing a skeleton sigh with buffering and sometimes flipping to apple sign.

nabidhadi wrote:
.its showing a skeleton sigh with buffering and sometimes flipping to apple sign.
You iPod has been jail broken. Unfortunately you are on your own here. I can offer that you need to find out which method and software was used to JB.
Good luck...you're gonna need it....

My bookmarks run off the bottom of the page, and I cannot move them up

When I open my bookmark folder and try to open a subfolder near the bottom of the screen, the bookmarks in this subfolder run off the bottom of the screen, and I can find no way to move them into a visible area.

There is a little triangle arrowhead used to scroll the bookmarks.
There have been some changes in pre release versions of Firefox.
What menus and icons are you using ?
For instance are you using the new menu icon that is alongside the Bookmarks star in Firefox 29 and later ?
(Unlikely from the description) Or are you using a second click on the bookmarks star itself ?
That has a slider on the scrollbar and has a tree of folders that may be expanded.
See [[Use bookmark folders to organize your bookmarks]]

TS3274 I use to be able to shut down apps as to not kill my battery by pushing the button twice and all apps running appeared at the bottom of the screen. Then i could turn each one off at a time. Now how do I do that with the IO7?

Before IO7, I would control the life of my battery by shutting down the apps. I would push the main button on the front twice and all apps that were running in the back ground would appear on the bottom of the screen. I could click on each one to shut it down. Now, I can't seem to figure out how to shut them down. Please help if anyone knows what to do.

Close inactive apps
1. Double tap the home button to bring up the multi-tasking view
2. Swipe the app's windows upwards to close
3. The app will fly off the screen

How do I get rid of "Open All In Tabs" from the Bookmarks dropdown menu? [STUPIDITY] Also, my bookmarks run off the bottom of the screen and I can't see them all.

The bottom of my bookmarks in one subcategory extends beyond the screen on my TV and I can't see them all. I can't see where any arrow to extend the bookmarks to the bottom of the list is so I've been clicking below the last visible bookmark in that list and I hit that STUPID "Open All In Tabs" crap (then everything locks up). WHO IN THE WORLD WOULD WANT TO OPEN ALL OF THEIR BOOKMARKS AT ONCE???? Seems really, really stupid to me. And why won't the bookmarks drop down list allow me to see all of the bookmarks I've saved on that topic? It does not automatically scroll down as large lists on other drop down menus routinely do.

I agree. It is a brainless moronic subcategory!!! I would love to get rid of it!

Error in CreateOUIProcess(): -1 Arg List too long

I untar'ed the install segments and followed the install instructions including setting users and groups and installing JRE 1.1.6.
When I run runInstall I get the following error:
$ echo $ORACLE_BASE
/opt/Oracle/oracle01/app/oracle
$ echo $ORACLE_HOME
/opt/Oracle/oracle01/app/oracle/product/8.1.5
$ pwd
/home/oracle
$ ./runInstaller
Initializing Java Virtual Machine from /usr/local/jre/bin/jre. Please wait...
Error in CreateOUIProcess(): -1
: Argument list too long
I am running Mandrake 6.1 and I am trying to install from oracle's home directory into another directory.
Help!

Joseph,
Don't use the runInstaller, but go to the install/linux dir and do ./runIns.sh
Worked for me ;-)
good luck!

Universal Installer CreateOUI :argument list too long

I am running RH6.1 using KDE and JRE117_v3.
Each time I try to start the installer I
reciecev the error:
Initialising Java Virtual Machine from
/usr/local/jre/bin/jre
Error in CreateOUIProcess(): -1
:Argument List Too Long
Any solution would be greatly appreciated
Thanks PB

I found the answer.
It's a bash-related problem.
It's making a list of all that files, and this is too big.
If I change my command:
jar -cfi ../blues.jar .
the directory is visited file by file and there's no problem about 40.000 files (it only takes 20 minutes :)

Buildall.sh env: javac: Arg list too long

Hi, Having trouble building dbxml in SmartOS (opensolaris).
While building Berkeley DB for Java in a long javac command, the script breaks with error:
env: javac: Arg list too long
make: *** [db.jar] Error 126
$ getconf ARG_MAX
1048320
returns a fairly high number - I built the same on FreeBSD with a much smaller number.
Any suggestions on how to get this built and what is causing the problem?
Thanks in advance!

WORK AROUND:
cd ./dbxml-2.5.16/db-4.8.26/build_unix
create file dbsrcs.txt that lists all the java source files listed in the JAVA_DBSRCS environment variable
it should look like this:
../dist/../java/src/com/sleepycat/util/ErrorBuffer.java
../dist/../java/src/com/sleepycat/util/ExceptionWrapper.java
../dist/../java/src/com/sleepycat/util/ExceptionUnwrapper.java
../dist/../java/src/com/sleepycat/util/PackedInteger.java
../dist/../java/src/com/sleepycat/util/keyrange/KeyRange.java
save dbsrcs.txt file inside dbxml-2.5.16/db-4.8.26/build_unix directory
# nano Makefile
find line:
$(JAVAC) -d $(JAVA_CLASSTOP) $(JAVACFLAGS) $(JAVA_DBSRCS)
and replace with
$(JAVAC) -d $(JAVA_CLASSTOP) $(JAVACFLAGS) @dbsrcs.txt
while inside the dbxml-2.5.16/db-4.8.26/build_unix directory, run make, to just compile Berkeley DB only
once completed, go back to dbxml-2.5.16 and run
./buildall.sh --enable-java
since Berkeley DB was already built, the build script will see this and skip the Berkeley DB compile since it's already compiled!

Unable to evaluate workflow rule - Value too long for field

Need help with a workflow error for a record update before the record is saved. There are 3 calculations that would be done in a particular order - all on number fields. Each time, I am overwriting existing values. The individual numbers could have up to 6 decimal spaces. When I try to update one or more fields that contain the calculation, I get an error message saying that the system is unable to evaluate the workflow rule - value too long for field (zNum6).
This same calculation is fine when a new record is entered and the calculation is done as a default field value.
Any ideas?

I actually had to use a ToChar function at the beginning of the calculation and #### to indicate the number of digits to make this work. Oracle Help Desk provided the answer - quickly.

Argument list too long

I got a directory of about 40.000 files.
I'd like to abuse jar for archiving those files because
a) I'm used to the syntax of jar
b) I thought that enabling indexing, the search for a single file could be very fast.
I said:
> jar -cfi ../blues.jar *
and I got:
> jar: Argument list too long
I got this error on linux, using jar of jdk-1.4.2-beta.
Is this a problem only of the linux-jar?
I started to test this out on an windows pc, but hadn't the time to finish the test, but it looked, as if it would work, because it didn't fail for the first 20 Minutes :).
(It fails nearly immideately on linux).
Is this an error of jar, or of bash?
Would it work, if I create a shell-script, which adds the files one by one?
Will an index really speed up the search for a single file?
It seems to me, as if only directorys are mentioned in the index-file?
Is there a well defined maximum of files that can be put into a jar file?

I found the answer.
It's a bash-related problem.
It's making a list of all that files, and this is too big.
If I change my command:
jar -cfi ../blues.jar .
the directory is visited file by file and there's no problem about 40.000 files (it only takes 20 minutes :)

Oracle8i Install: Argument list too long

When I try to install Oracle8i Enterprise 815 on Linux-Mandrake
6.0 (2.2.12 kernel) using a bash shell under fvwm/KDE/GNOME, I
get the following error messages:
[oracle]$ ./runinstaller
Intializing Java Virtual Machine from /usr/local/bin/jre. Please
wait..
Error in CreateOUIProcess(): -1
: Argument list too long
Would anyone have an idea what's going wrong here?
Thanks.
Scott Langley
[email protected]
null

How large is ARG_MAX in /usr/src/linux/include/linux/limits.h and
MAX_ARG_PAGES in ./include/linux/binfmts.h? On my system (RH6),
ARG_MAX is 128K and MAX_ARG_PAGES is 32 (4K pages). The argument
lists used by the Oracle installer for its subprocesses are
pretty long!
-David
Scott Langley (guest) wrote:
: When I try to install Oracle8i Enterprise 815 on Linux-Mandrake
: 6.0 (2.2.12 kernel) using a bash shell under fvwm/KDE/GNOME, I
: get the following error messages:
: [oracle]$ ./runinstaller
: Intializing Java Virtual Machine from /usr/local/bin/jre.
Please
: wait..
: Error in CreateOUIProcess(): -1
: : Argument list too long
: Would anyone have an idea what's going wrong here?
: Thanks.
: Scott Langley
: [email protected]
null

Rules List Too Long and Runs off the Bottom of the Screen

Similar Messages

Maybe you are looking for