Rules Manager and Expression filer on XE

Has any one installed Rules Manager and Expression filter on an XE database? Would love to check it out on XE. Looks like it is not pre-installed. I was able to run the install scripts. I noticed one error though. It seemed to indicate jvm is not installed on XE. Tried to locate initjvm scripts. Either the script name has changed in XE or it is not there. This is a quick question in case somebody has gone down this path. I will post more details soon when I get sometime to look at the full log.

Read the post about javavm. I could not find the post where Tom has said it would be very problematic to install javavm on XE. I guess Rules Manager and Expression filter on XE is not possible or very difficult.

Similar Messages

Rules Manager and Expression Filter

I was wondering if someone could shed light on Rules Manager and Expression Filter.
How will the use of Rule Based Development be efficient compared to todays
Programming paradigm ?

Zahir and Michael,
The Wikipedia entry for "Rules Engine" summarizes the key benefits of using rule-based development approach in dynamic environments.
Also see a brief discussion on "Developing Rules Applications" in the Application Develeoper's Guide http://download-west.oracle.com/docs/cd/B19306_01/appdev.102/b14288/exprn_intro.htm#sthref22
Please contact me through Rules Manager forum (Rules Manager & Expression Filter if you need additional help.
Regards,
-Aravind.

NW BRM, Rules Manager and transport the BRM project through the landscape.

Hello,
I have a question about the working with Rules Manager and the possible difficulties of the changes management.
The scenario is simple.
We have created a BRM project in software component with decision table and initialized it with some values. Then we transported it to the QA and Prod system through the CMS. Note: in the SC not only the BRM project but also a WDJ, for example.
Then business user changes the values in the decision table in Prod system by using Rules Management functionality. Everything is OK till now.
But then we changed something in the WDJ component in the same SC and then transported it to the Pros system. After that transport the changes of the business user are lost. How can we fix it?
Of course we can download the runtime content from the prod system, but it's bit complicated. Any ideas?

Dear Kirill,
SAP NW Business Rules Management web UI tool for business users (Rules Manager) has a feature "Download Rules Content" from CE 7.3 onwards.
Please find the details of the feature in the below link:
http://help.sap.com/saphelp_nw73/helpdata/en/42/89a408c265402dbaf1c39ea423d816/frameset.htm
Using the above "Download Rules Content" feature of RulesManager, you should be able to import the latest version of the Rules Project, which contains the changes done by the business user, into NWDS. Once you have the modified rules project in NWDS you should be able to transport it to QA and Prod systems without the data loss.
But this feature is only available from NW CE 7.3 onwards.
Hope this helps resolve your problem.
Thanks and Regards,
Santosh Giri

Rules Manager and Filters

Is it possible to create a rule in Rules Manager that uses a filter? We are using Endeca Workbench 2.1.2; we don't have Experience Manager. Thanks.

No, you can only trigger rules by dimension values, text terms and/ or user profiles.
regards
Terry

Media Manager and .motn files

Hi all,
I am having a strange problem....I have Media Managed a number of projects, and they have .motn files (either media that was on the timeline, sent to Motion, modified, then saved, OR, I used a Master Template in FCP that I made in Motion). When I open the MM'd project on my computer everything is fine, but on a different computer, FCP cannot find the .motn file. I assume it is because the template or associated files are on my system, but I would hope that Media Manager would create a .mov from that .motn file so it can open on a different system. Does anyone have any experience with this issue?
Thanks,
Dave

Great explanations, but I want to make sure my workflow is sound before tossing something. Given that this is an integrated suite, I'm not too comfortable needing to do the following, so please correct me if I am wrong, or share the better way. After I Media Mange my Final Cut project, I need to:
1) create a new folder called "media" inside the "media" folder Media Manager created.
2) drag and drop the motion media from the media folder(s) created with "Copy to Folder" (explained above) into the media folder I just created.
Question: Is my assumption correct that I do not need to drag and drop things like "wisp04," "basic blur" or "texture 01"? If so, why on earth are they included?
If this is the workflow, I shutter to think how many people have lost media files because they assumed incorrectly everything was being collected via FCP Media Manager. Is there a step-by-step somewhere that you can point me to? Bonus questions: Can you speculate the reason or advantage of doing it this way? Do you think Apple should improve it? Thanks!

Security Manager and Policy Files

Hi all,
I am writing a simple java rmi application, but understand it wont run without a Security Manager installed and a policy file.
I think I have installed the security manger using the following in the main() method of my client application:
System.setSecurityManager(new RMISecurityManager());However I am unsure how to use a policy file with this. I have looked on the internet, but it does not seem to be very well documented
Please could you advise me how to create a policy file that will work for my application and where to place it in my application so that my application can use it.
Any help would be greatfuly appreciated
Thanx
Aaron

An RMI application doesn't need a security manager unless you are using the codebase feature.

Decision table rules manager content disappearing

Hi Experts,
We have BRM decision table deployed . I can access that from Portal and Rules manager . I can modify the content of that table . No Problem till now .
The problem is :
Every time transport happens to P for any thing (not related to table ), that content of table is removed automatically .And i have to do the entries again Manually .
this is very difficult and unreliable . Please suggest how we can make that content persistent even we deploy something .or how can i upload content fast after deployment . say from some excel or file .

Hi Govind,
Well it could be a real problem but I suspect you are missing a couple of steps... to check...
Before making any changes in your NWDS, you should be downloading the current active version of the Rules Project and importing that into your NWDS. Suggest you read the SAP Library help on this one and you'll need to get security to give you BRM Download access - there's a security action for this that they need to add to your security role in the production environment.
This is the link you need:
http://help.sap.com/saphelp_nw73/helpdata/en/4d/9d62f71ede478e9496a29fe1533976/frameset.htm
As for how to upload the decision tables content en masse... that's that the export/import (to/from MS Excel) buttons are for in the decision table section of Rules Manager and where you, or better still your business user (these are business rules after all ), should be doing this.
Hope that helps,
Jocelyn

Oracle Rules Manager vs Oracle Business Rules

Hi
Can someone explain the difference between Oracle Rules Manager and Oracle Business Rules.
Is Oracle Promoting both the products?
What I understand is that Oracle Rules Manager comes a part of the Oracle Database 10g R2 (and 11g) and Oracle Business Rules is a part of the SOA suite.
Is there any difference in the positioning of both these products?
Our client is evaluating various Rules engines in the market and we want to make sure that we choose the correct product.
Thanks, Srini

Igor S. wrote:
He solves the same problem with rules and without. My question was what would be better? Why would you chose one over the other. I prefer rules that is easy to state, easy to read, and easy to implement. Clear text rules in Prolog being a firm favourite. :-)
Using a rules engine, with a fairly complex API, in order to define rules? I would want very sound and very robust justification for that.
Taking this EMP table example. If there is a single AddEmp() PL/SQL procedure interface for adding employees, it is simple matter to see what it does, how it does that, and test and debug that. The only knowledge needed is the ability to read and understand the source code. The same cannot be said of rules engines.
As for the issue of updating AddEmp() with new rules. Edition redefinition takes care of versioning database objects. And in a far more controlled fashion than dealing with a rules engine that is dynamically update now! while the database is in use - and you have no real idea or real control over when exactly now! was.

New to Business Rules Management

Hi All,
I am really new to Business Rules Management and trying to model rules in the SAP Netweaver Composition Environment.
Could someone let me know if they have any sort of document to do the same.
Thanks & Regards,
Sushanth Hulkod

Hi Suskanth,
Check out the BRM section on SDN http://www.sdn.sap.com/irj/sdn/nw-rules-management as well as the SAP NetWeaver BRM section SAP NetWeaver Business Rules Management Resources Center [original link is broken] where you can find tutorials.
O.

My external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive. Same thing has happened with Final Cut Express.

My new LaCie external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive.
The same thing happened recently between Final Cut Express and my other LaCie external hard drive used as the Scratch disk. It fixed itself.
I've run out of ideas. Help would be very much appreciated. Thanks.

have you done some searches on FCPx and time machine? Is there a known issue with using a TM drive with FCPx? dunno but ...wait...I'll take 60 sec for you cause I'm just that kind of guy.... google...." fcpx time machine problem" Frist page link
http://www.premiumbeat.com/blog/fcpx-bug-best-practices-for-using-external-hard- drives-and-final-cut-pro-x/
You cannot have time machine backups on your hard drive if you intend to use it in FCPX.
booya!

Unable to clear a specific file from the Download Manager. This file (type: .flv) download is "paused" and I cannot Resume or Clear from the history. Help anyone ?

I noticed a certain file is "stuck" in the Download Manager. The file download appears to be Paused and all attempts to remove / clear / resume have not worked. The file is a .flv type. The mouse-over info does show the url address and it shows 40MB /40MB complete. Help anyone ?

Delete the file downloads.sqlite in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
See:
* http://kb.mozillazine.org/Unable_to_save_or_download_files#Manually_delete_download_history

I have lost my photos/videos when i imported from my ipad 2 to my new imac latest version and it's not reading the files. I have downloaded iMac library manager and can see them. can someone shed some light please ?

i have lost my photos/videos when i imported from my ipad 2 to my new imac latest version OS X 10.8.4
and it's not reading the files. I have downloaded iMac library manager and can see them. when i go back into iphoto i'm getting the following message :
Do you want to switch the current iPhoto Library from “iPhoto Library.photolibrary” to “iPhoto Library.photolibrary” and relaunch iPhoto?
I don't know what to do - please help !!!!
can someone shed some light please ?

So it appears you have only one library on the hard drive. Apply the two fixes below in order as needed to that library:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

File Manager and Synchronization

Thought I would bring this to wider attention (so reposting part of another post, apologies for that if you read it twice): the new File Manager app (by Acaras, I believe) seems to work just fine and is well worth 5 dollars. Great to see that holes in the Playbook experience are gradually being filled. I can click and open any file listed here, from word and excel to mp4, and even photos show up in small but view-able icons.
This takes care of a huge issue for the Playbook being able to justify a claim to being a business tablet. Now we can organize many documents (word, excel, powerpoint, pdf) into folders or categories, browse by those categories and open them accordingly. Once a document is in a folder, when you work on it and save it, it remains in that folder. I tried opening a new document, however, and there is no apparent way to control where it saves into. *I hope that will be another function added soon by RIM and partners.
Another big issue was regarding synchronization, there didn't seem to be a way to synchronize documents between Playbook and the computer. DataViz (which is now owned by RIM) invented this type of function in the days of Palm, so a mystery why it wasn't developed for Playbook. *Is this feature going to be added, RIM? However, I have found that I can synchronize using an application on the computer, I have used GoodSync to synch between laptop and desktop for several years. So this application detects whatever changes you have made to a document on Playbook and updates the same document on your computer.
The only problem I can see here is that you can't easily list a number of documents on your computer to synch to your Playbook (the way Documents to Go would do on my Palm), or if you really wanted to do that with GoodSync it seems quite cumbersom. Instead, I have to set up a few folders (eg. Playbook Working Folder, Current Reading) where I place current documents that I know I may be using on the Playbook. I tried using a shortcut instead of the original document to place in that folder, but it doesn't work. Anyway, this solution is still pretty helpful. It's not a bad thing to be forced to go back and finalize a working document and store it carefully when you're finished your active work with it. In the past I tended to leave different versions and when I went back, I had to check which was the last version.
If anyone had any further experiences or suggestions for how to manage and work with files that would be great to see.

hi, the file manager from acaras does work pretty well (for sure the best), but the videos app remains a total mess! i was hoping that rim would expand on that app, because no matter how organized my acaras app is, any kid who grabs my book and hits video, is going to be greeted with a whole mess of adult material!
also, still no support for mpeg video huh? brutal.
also, still no support for eye-fi cards or the fabled andoid player. brutal.
also, direction buttons on the key pad maybe?

Manage multiple InDesign and pdf files

I'm looking for help managing multiple pdf files created from InDesign. I make several catalogs from multiple InDesign files. Each InDesign file could be used in multiple catalogs. These catalogs are output as pdf files. The pdf files are sent to print and also live on our website. I could update one InDesign file for a particular catalog. That same file could also be in another catalog that should be updated as well. The online version would need to be updated also. This doesn't always happen. There are so many things that have to be updated manually.
I know this is confusing and vague. I'm guessing there has to be a way to not have to do everything manually. There has to be a smarter way to do this.
I would appreciate any suggestions or even a push in the right direction for research.
Thanks!

You know you can place InDesign files directly into another InDesign file.
Then when you update the master indesign file you will be prompted to update your links in any other document that this appears in.

Yosemite is awful- unable to empty trash, volume options are haywire, error codes on file management, and files won't replace when moved. What are my options at this point?

Like the topic - "Yosemite is awful- unable to empty trash, volume options are haywire, error codes on file management, and files won't replace when moved. What are my options at this point?"
I installed this OS, and it looks nice, but it's terrible to use. I randomly have the volume controls get disabled, and sometimes the volume menu in the system tray does nothing when adjusted which I've never seen in an OS before. The trash won't empty. When I try to drag and drop newer files over existing ones, nothing happens. The old ones just stay there. I have to delete the old ones and then move the new ones. And when I go into the protected files to manage audio plugins (I make music), the first thing I hit are error codes galore, and password prompts that either don't popup when they should, or don't execute the command after I provide my password.
What can I do now that I installed the flames of **** onto my computer?

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
resetp
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Rules Manager and Expression filer on XE

Similar Messages

Maybe you are looking for