Rules of factoring

Hi All
what are the difference between XPPF, XPP1, XPP0, X VAL ?
please can anybody explain
charan

Hi,
what are the difference between XPPF - To determine partial periods like termination, basic pay change, unpaid absences.
XPP0, This is sub rule for XPPF
XPP1: Partial period factor on which basis we are going to calculate like on calendar days and working days, working hours
X VAL - Valuate payroll elements using partial period factors,
Valuate payroll elements are basic pay, hra, Conveyance, DA etc.
Regards
Devi

Similar Messages

Adobe Premiere Elements 10 not starting up.

When ever I start up Premiere it opens up with a message that says:
Premiere Elements 10.0 has encountered an error
[..\..\Src\EMS\WSEMUtil.cpp-715]

xpcm
Thanks for the reply. We may have our answer in your Premiere Elements 10 running on a computer that uses a NVIDIA GeForce card. There is a known issue relating
to Premiere Elements 10/NVIDIA GeForce with the solution being roll back of the driver version to about May 2013. But, I have not seen it reported before in association
with the particular error message
[..\..\Src\EMS\WSEMUtil.cpp-715]
But because of the history on this matter in
the Announcement at the top of this forum
and
ATR Premiere Elements Troubleshooting: PE10: NVIDIA Video Card Driver Roll Back
we do need to rule this factor in or out.
Go to the following site for older version NVIDIA GeForce and plug in your information to download and install the May 2013 driver version
http://www.nvidia.com/Download/Find.aspx?lang=en-us
It is the Driver GeForce 320.18 Driver........320.18.......May 23, 2013 that you want.
Are you working with SD or HD projects?
Please review and consider and then let us know the outcome. The references cited with give you a
comprehensive view of the Premiere Elements 10/NVIDIA situation.
Thank you.
ATR

Timeline Bug while dragging, trimming, moving a clip

Hello,
I have a huge problem with Adobe Premiere Elements 11 on a Mac, OSX Lion - only in the expert mode:
If I want to drag a clip in my timeline or reposition it or trimm it, the normal background of the timeline is replace with a copy of the preview-part above. So I could not see where to place my clip exactly. I see only the duplicated preview area - see my screenshots:
Insert a clip:
Remove a clip:
Normal view, while doing nothing:
How can I fix this problem? Has anyone the same bug?
Best regards
Tom

Bob
No I am not affiliated with Adobe in any way. Just an Elements user, and an Elements Windows user at that. But I have an over active troubleshooting gene.
The issue symptoms that you present surely do fit the profile intended for that Adobe issue and its fix. Since Adobe did offer the fix, I assumed that it had insider information on cause and its relationship to the fix.
Even if you do not act on updating display driver for your new computer, for troubleshooting purposes, I would identify the display driver that you have, go to the web site of the display driver card's manufacturer, and verify that the display driver is up to date to rule that factor in or out. In troubleshooting,take nothing for granted. If you verify that the display driver is up to date, then I would go back to Adobe Technical Service, update it on your details, and then learn "what next".
Several months ago elsewhere I was working with a Premiere Elements 11 Mac user, dealing with this same issue. Last I heard from him, nothing worked.
We will be watching for your progress.
Thanks.
ATR

Premiere elements 9 workspace will not load up after reinstalling the software

i have been using premiere elements 9 on my laptop for a few years. recently, I took my laptop into the local computer store to have it cleaned up due to virus', they backed up all my data, and left me with nothing but my windows 7 and my backed up files (which is what I expected and asked for). After re-installing my Adobe Photoshop elements 9 and Premiere Elements 9, I cannot use the premiere elements 9 program. it only gets so far before closing. After clicking the premiere elements 9 icon, I am taken to the "Organize, Open project, New Project screen". upon selecting Open Project or New Project, it goes to the Premiere elements panel....that's it. I cannot open a workspace, tasks etc..... . If I try to open an old project (file>open>.....) nothing happens. nothing loads. same with file>new>...... if I keep trying , I get the message 'Premiere Elements has encountered an error and will close'
my Adobe Photoshop Elements 9 works just fine. came in the same package.
I have uninstalled premiere elements 9 twice now, and reinstalled it, same thing happens.
losing my mind a bit, as creating video is a hobby (youtube etc....) and I'm at a stand still.
any help would be greatly appreciated.

DavidBrum
If the Premiere Elements 9.0/9.0.1 problem set in after the installs of any one of the programs installed, then you should rule that factor in or out for each systematically. Each would be a prime candidate for troubleshooting exploration.
But, before you do that, let us try deleting the Premiere Elements 9.0/9.0.1 settings file. In Windows 7, 8, or 8.1 64 bit, it can be found in the path
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements Folder
9.0 Folder
and in the 9.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not correct the problem, then deleted the whole 9.0 Folder in which the Adobe Premiere Elements Prefs file exists.
IMPORTANT
a. Make sure you are working with Folder Option Show Hidden Files, Folders, and Drives active so you can see the complete path.
b. Do not detour or get lured into a Premiere Elements 9.0 Folder instead of the Premiere Elements Folder/then 9.0 Folder.
Please let us know the outcome.
Thank you.
ATR

Problem with .mov file type in premier elements 10 on windows 7

My canaon power shot elph movie uses .mov (apple file) which I sent to PE10. When I try to play it in PE10 only audio plays, there is no sink between audio and video. If I move the marker under the vidio the vidio will follow the mark playing. I am on window 7 pc. Any ideas? There is a audo vidil link in CLIP, but if is not hi-lited so I can activate it. I want to do some editing and then burn a DVD to play on my TV. Help!!!!

ri-olson
There is an epidemic of display issues targeting specifically Premiere Elements 10 users whose computer use a NVIDIA video card. For now, the answer is to roll back the video card driver version rather than to assure that you have the latest video card driver installed on your computer. Please check out the following thread in this regard and determine if any this applies to your situation.
http://forums.adobe.com/message/5836037
Once we rule this factor out, we can move on to other troubleshooting schemes.
What John T. Smith has asked is do you have the latest version of QuickTime installed on your computer with your Premiere Elements 10. If you do, the latest version is 7.7.4. You should be able to find confirming information on that in Help Menu/About QuickTime in the opened QuickTime. That is not a codec number. It is the version number (latest version) for the QuickTime program on which Premiere Elements is very dependent.
As for codec, in this case, the question being asked is what is the video compression in your file that has the .mov file extension. If you do not know and do not have access to a video properties reader (such as MediaInfo), perhaps we could get the needed information from the brand/model/settings information for the camera that was used to record the video.
Please review. We will be watching for your progress.
Thanks.
ATR

IMac to iPod using Wi-Fi

Why dose my Wi-Fi connection drop off at times even though I do not move the iPad or my iMac, when the connection drops I then go to my iMac and put the iPad close to the iMac and it takes about a minuet for the signal to come to full strength, also the iPad seems to have problems connecting with the internet even thought there is plenty of band with.
Thanks
George

George Hilton wrote:
TC
George,
TC stands for *Time Capsule*. you do have one, right ?
also I live out in the country so as far as I know there are no Wi-Fis about although there could be radio interference.
right. additionally, your cordless phone, your microwave oven, or even turning on bluetooth on your iMac could interfere with the wifi signal.
in order to rule those factors out, you might want to temporarily turn of any cordless phones, turn off bluetooth, or indeed try changing the channel your wireless router (TC or whatever) broadcasts on.
well, best of luck !
JGG

I have Adobe Premiere 11 and I can't get videos about 30fps (I want 60) and when I do 1080p it zooms in the footage, please help

I record 1080p footage at 60fps but adobe makes it 720p (because 1080p zoom in the footage for some reason) and then 29.97 fps because it doesn't go higher than 30.

mrmsterdavid
Premiere Elements 11 on what computer operating system? For now I will assume Windows 7, 8, or 8.1 64 bit.
I do not understand why the following should be happening as well as the description that you give for the "because" parts.
I record 1080p footage at 60fps but adobe makes it 720p (because 1080p zoom in the footage for some reason) and then 29.97 fps because it doesn't go higher than 30.
The project's automatic handling of setting the project preset can be flawed at time. So, let us rule this factor in or out by you setting the project preset manually.
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
Requested Troubleshooting
Part 1.
Open a new project and take Premiere Elements 11 to its Expert workspace.
Then File Menu/Project/New and Change Settings.
You say that your footage is 1080p60. Is that correct? Assuming it is, then
In Change Settings, change the project preset to
NTSC
AVCHD
AVCHD 1080p60
OK out of there.
When you do, you will be facing the New Project dialog. There make sure that you have a check mark next
to "Forced Selected Project Setting on This Project". OK of there.
When you are back in the Expert workspace, use Add Media/Files and Folders/Project Assets to import your
1080p60 file into the project. Drag the file to the Timeline. How does it present in the Edit area monitor?
At the Timeline level, is there no colored line over its content or an orange line over its content?
Part 2.
Right click the thumbnail for the file in Project Assets, and select Properties. What does Properties show for the frame size?
Right click the thumbnail for the file in Project Assets, and select Interpret Footage. In the Frame Rate section of Interpret Footage dialog,
what is given as the file's frame rate. In the Pixel Aspect Ratio section of Interpret Footage dialog, what is given as the file's Pixel
Aspect Ratio?
The above should define the situation.
Looking forward to your details.
Thank you.
ATR

Editor and Organizer Black

I was almost finished with a video I have worked on for 4 days when the editor and organizer went black. The software keeps shutting down now. What do I do? By the way, the files all loaded. I just can't see them.

Ruthi54
Somehow that does not look like Premiere Elements 11 or 12. What version of Premiere Elements are you using and on what computer operating system is it running?
If you are running Premiere Elements 10 and your computer uses a NVIDIA GeForce video card, then please read the Announcement at the top of this forum. If you are a Premiere Elements 10 NVIDIA users, then it is mostly likely that you will need to roll back the NVIDIA card version to continue to use your Premiere Elements 10. For your convenience, a copy/paste of the Announcement
Announcement: Premiere Elements 10 NVIDIA Video Card Driver Roll Back
Hide Details
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.ht ml
Please let us rule this factor in or out at the onset.
Thank you.
ATR
Add On...Your screenshot shows some icons at the bottom of the screen that appear to have warning symbols. What do those icons represent?

Premiere Elements 9.0 will not open

In August 2011 I purchased Adobe Premiere Elements 9.0 with a new Dell PC using Windows 7 64-bit. Since then I have used Premiere Elements many times for video editing without problems. The last time I used it was about 3 months ago. This week I tried to use Premiere Elements, but was unable to load it. The software would start to load up to the point of displaying the full screen with task bar, but without showing the individual “panes”, at which point it appeared to freeze. If I then tried to use the drop down menus (File/New/Project or Files/Open Project) an error message would pop up saying “Sorry, a serious error has occurred that requires Adobe Premiere Elements to shut down. We will attempt to save your current project.” after which the program would shut down. I have tried unistalling and reinstalling Premiere Elements, but it has not solved the problem. Any ideas how to fix it?

DavidBrum
If the Premiere Elements 9.0/9.0.1 problem set in after the installs of any one of the programs installed, then you should rule that factor in or out for each systematically. Each would be a prime candidate for troubleshooting exploration.
But, before you do that, let us try deleting the Premiere Elements 9.0/9.0.1 settings file. In Windows 7, 8, or 8.1 64 bit, it can be found in the path
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements Folder
9.0 Folder
and in the 9.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not correct the problem, then deleted the whole 9.0 Folder in which the Adobe Premiere Elements Prefs file exists.
IMPORTANT
a. Make sure you are working with Folder Option Show Hidden Files, Folders, and Drives active so you can see the complete path.
b. Do not detour or get lured into a Premiere Elements 9.0 Folder instead of the Premiere Elements Folder/then 9.0 Folder.
Please let us know the outcome.
Thank you.
ATR

Premier Elements 12 randomly crashing

Premier Elements 12 randomly crashing, WIndows 8.1, Dell 9020 AIO
event viewer shows;
Application: Adobe Premiere Elements.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: exception code c0000005, exception address 000000000AD443D5
Faulting application name: Adobe Premiere Elements.exe, version: 12.0.0.0, time stamp: 0x52251824
Faulting module name: TitlerCreator.dll, version: 12.0.0.0, time stamp: 0x5225108b
Exception code: 0xc0000005
Fault offset: 0x00000000000043d5
Faulting process id: 0x27c4
Faulting application start time: 0x01cf50362d4954b8
Faulting application path: C:\Program Files\Adobe\Adobe Premiere Elements 12\Adobe Premiere Elements.exe
Faulting module path: C:\Program Files\Adobe\Adobe Premiere Elements 12\TitlerCreator.dll
Report Id: 272de427-be53-11e3-be81-c81f66abbe4a
Faulting package full name:
Faulting package-relative application ID:
Faulting application name: Adobe Premiere Elements.exe, version: 12.0.0.0, time stamp: 0x52251824
Faulting module name: MSVCR100.dll, version: 10.0.40219.325, time stamp: 0x4df2bcac
Exception code: 0x40000015
Fault offset: 0x00000000000761c9
Faulting process id: 0xf4c
Faulting application start time: 0x01cf529e81a9051d
Faulting application path: C:\Program Files\Adobe\Adobe Premiere Elements 12\Adobe Premiere Elements.exe
Faulting module path: C:\WINDOWS\SYSTEM32\MSVCR100.dll
Report Id: 422270fa-be96-11e3-be82-c81f66abbe4a
Faulting package full name:
Faulting package-relative application ID:

WhiteLeroy
Thanks for your recent posts detailing your TImeline issues. Because of the varied remedies and setbacks with which you are dealing with, let us recap for a moment about some basics so as not to take anything for granted.
Premiere Elements 12 on Windows 8.1 64 bit
1. What is the video card/graphics card that the computer uses and is it up to date according to the web site of the manufacturer of the card? Does you Device Manager/Display Adapters area show 1 or 2 cards?
2. Review your settings under Edit Menu/Preferences/Audio Hardware ASIO Settings.
3. Delete the Adobe Premiere Elements Prefs file, and, if necessary, the whole 12.0 Folder in which it exists.
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
12.0
and in the 12.0 Folder is the Adobe Premiere Elements Prefs file that you delete. Be sure to be working with Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path cited.
4. Do a ccleaner run through (regular cleaner and registry part)
https://www.piriform.com/ccleaner
5. Assure that you do not have pile up of preview files, conformed audio files, or conformed video files.
See Libraries\Documents\Adobe\Premiere Elements\12.0 and Adobe Premiere Elements Preview Files Folders (for preview files), Media Cache Files Folder (for conformed audio cfa and pek).
See Edit Menu/Preferences/Media and the Media Cache Database area Clean button.
6. Generally check Scratch Disks for location and free space at the location to which each is directed.
See Edit Menu/Preferences/Scratch Disks.
7. General question...how project specific have these issues become?
Please review and let us rule these factors in or out.
Thanks for the follow ups.
ATR

Premier Elements 12 Crashing

Premier Elements 12 keeps crashing.
roblem signature:
Problem Event Name:                        APPCRASH
Application Name:                             Adobe Premiere Elements.exe
Application Version:                           12.0.0.0
Application Timestamp:                     530bd1ca
Fault Module Name:                          MSVCR100.dll
Fault Module Version:                        10.0.40219.325
Fault Module Timestamp:                  4df2be1e
Exception Code:                                  c0000005
Exception Offset:                                00001ed7
OS Version:                                          6.1.7601.2.1.0.256.48
Locale ID:                                             2057
Additional Information 1:                  0a9e
Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
Additional Information 3:                  0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Can anybody help
BJ

WhiteLeroy
Thanks for your recent posts detailing your TImeline issues. Because of the varied remedies and setbacks with which you are dealing with, let us recap for a moment about some basics so as not to take anything for granted.
Premiere Elements 12 on Windows 8.1 64 bit
1. What is the video card/graphics card that the computer uses and is it up to date according to the web site of the manufacturer of the card? Does you Device Manager/Display Adapters area show 1 or 2 cards?
2. Review your settings under Edit Menu/Preferences/Audio Hardware ASIO Settings.
3. Delete the Adobe Premiere Elements Prefs file, and, if necessary, the whole 12.0 Folder in which it exists.
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
12.0
and in the 12.0 Folder is the Adobe Premiere Elements Prefs file that you delete. Be sure to be working with Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path cited.
4. Do a ccleaner run through (regular cleaner and registry part)
https://www.piriform.com/ccleaner
5. Assure that you do not have pile up of preview files, conformed audio files, or conformed video files.
See Libraries\Documents\Adobe\Premiere Elements\12.0 and Adobe Premiere Elements Preview Files Folders (for preview files), Media Cache Files Folder (for conformed audio cfa and pek).
See Edit Menu/Preferences/Media and the Media Cache Database area Clean button.
6. Generally check Scratch Disks for location and free space at the location to which each is directed.
See Edit Menu/Preferences/Scratch Disks.
7. General question...how project specific have these issues become?
Please review and let us rule these factors in or out.
Thanks for the follow ups.
ATR

Playback so jerky on Premier Elements 11 I can't edit. Urgent help required.

My clips are from a Panasonic HC V700 camera filmed at 1080p 50fps
Project settings are PAL 1080p 50fps
There is no orange line above the timeline - only a small green section where I added a transition and rendered - so I assume the project setting match the properties of the clips.
My laptop details are:
Acer Aspire 5742Z
Intel (R) Pentium (R) CPU P6200 @ 2.13GHz
Installed memory RAM 4GB
System Type 64 Bit Operating System
I'm using Windows 7
I save projects and files onto an external hard drive - a Hitachi Touro Mobile 3.0 1TB
I've defragged my laptop hard drive but that hasn't helped. I've updated the audio, video, graphics drivers but that hasn't made a difference either. Is it likely to be the lack of RAM?
I have to have this video (approx 5 mins but with complex green screen stuff in it so a few layers of video going on) edited and uploaded to Vimeo by midnight on Sat 31st May. I've never had this issue before with the same camera and same settings etc. There's been some jerkiness but not so bad I can't see to edit properly.
Any help gratefully accepted.
ETA - I saved the minute long section I've done as a quicktime movie and it played back fine on the laptop.

Hildergard
Some thoughts...
If you video source for the project is 1080p50 (1920 x 1080 @ 50 progressive frames per second), then make sure that the project preset is set a
PAL
AVCHD
AVCHD1080p50
If you are allowing the program to do an automatic project set, the check to determine what it is setting. See Edit Menu/Project Settings/General and the Editing Mode, Timebase, Frame Rate, and Pixel Aspect Ratio readings (even if the fields appear to be grayed out). For that project preset, the Project Settings there should read as follows
If you see Editing Mode = 1080i, then start a new project, set the project preset manually to the 1080p50 project preset, and then import your 1080p50 into the project. The how to for setting the project preset manually is described toward the bottom of the following
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
With your video formats, double check what you have. Could there be any confusion between 50p and 50i. Just in case note...when you see 50p, that represents 50 progressive frames per second. When you see 50i, that represents 50 fields per second which is the counterpart of 25 interlaced frames per second.
Please check out the above so that we can rule those factors in the matter that we seek to resolve.
Thanks for the follow ups.
ATR

Audio Effects delay kicking in after each clip

Hello,
I am using DeNoiser and NewBlue Noise Reducer to eliminate some hiss I have on my audio. Though the effects work to improve the sound, it takes about 2 seconds for the effects to kick in, and this happens with each clip. In other words, the hiss is present for about 2 seconds into each new clip before it fades away. I normally use Transition effects too, of course, but I even tested some clips without the Transitions and it still happened.
Any ideas?
Thanks

vmsmusic1066
I was just about to call it a day when I saw your post. I will comment about it further tomorrow, but for now.
I wanted to get a handle on the properties of what you were importing into Premiere Elements, such as, video and audio compression, frame size, frame rate, file extension, audio channels (2 or 5.1 channel), etc.
The project preset can have its impact on results so best we rule that factor in or out. What is the origin of this hiss noise? At first I thought that you might be recording to tape. What are they, just miscellaneous noises from the use of the external microphone?
Audacity Noise Removal might be worthwhile after all. Worth a try.
The only thing going into Audacity is the audio portion of the file. You can right click the file on the Premiere Elements Timeline and select Delete Video and then export the file (Publish+Share/Computer/Audio) for import into Audacity. From Audacity you can export it out as mp3 or wav for import back into Premiere Elements.
More on that tomorrow.
We will be watching for your progress.
ATR

The importer reported a geniric error

Hi,
I can't upload any file in my Premiere Elements 10. getting the error message "The importer reported a geniric error". It used to work well before (I have uploaded same file earlier). My laptop was crashed. So i restored it and re-installed PE10. I lost my PE10 original serial number. Got new Serial number from the Tech Support. Now I can't upload any file. I see lot of discussions on the same topic. but it seems nothing is resolved. Please help me.
Thanks,

The Anji
Let us start with background information.
What computer operating system is your Premiere Elements 10 working on? And, does your computer use a NVIDIA GeForce video card/graphics card.
If a NVIDIA GeForce card, then stop and let us know. There is a serious Premiere Elements 10/NVIDIA GeForce issue which is remedied by roll back of the card's driver version to about May 2013. We need to rule this factor in or out before considering other troubleshooting routes.
See Announcement at the top of this forum.
What are the properties of this file that was compatible with Premiere Elements 10 before but is not now?
Video Compression
Audio Compression
Frame Size
Frame Rate
Interlaced or Progressive
File Extension
Pixel Aspect Ratio
The brand/model/settings of the camera that recorded the video might give us the information that we need. How long ago
was everything work?
What project preset are you setting to match the properties of your source media?
Then the usual...latest version of QuickTime installed...and are you running the program from a User Account with Administrative Privileges and also have Run As Administrator applied?
Let us start here and then consider the troubleshooting plan.
Thank you.
ATR

Premiere 10 Hassles

My computer is constantly crashing when I bring up projects, and the playback is so slow, I'm waiting forever to just watch plaback. Editing has become impossible. Thoughts?

Gr8Pear990
Are you referring to Premiere Elements 10? On what computer operating system is it running?
By any chance does your computer have a NVIDIA video card? If so, please check out the following thread which deals with the epidemic of Premiere Elements 10 NVIDIA video card users and display issues et al.
http://forums.adobe.com/message/5907813
For now, the answer to that issue is to roll back the driver instead of the classical drill to make sure that your computer has the latest version of the video card driver.
Let us rule this factor in or out of your particular situation and then we can decide what next if necessary.
Thank you.
ATR

Rules of factoring

Similar Messages

Maybe you are looking for