Rules Set Issues and Information

Hi every one,
I am running a Rule Set.
In Job Console it still shows processing after a while, instead it should be showing completed status, when I expand the rule set in job console to watch the problem it shows that 1 rule is in still processing.
I ran the rule again and still the same issue, but this time when i expand the rule set, the order in which the business rule should execute is changed and a different rule is shown in processing which is being completed in the last attempt.
1)Does any one have any clue how to solve this issue? Or what is causing this Issue?
2)The rules in rule set runs in the same sequence as defined in rule set? or they just run randomly? why job console shows as if these rules are executed randomly??
Regards.

Hi Mehmet,
With due respect, I think the user11978217 might be facing the issue mentioned in Oracle doc. +Hyperion Planning Job Console Shows Incorrect Information About job completion. [ID 1429796.1]+, wherein planning job console shows running status but if we see the sessions in EAS console we don't find any for concerned request.
Hi user11978217,
If you see the last column in Sessions window which is "Request Status", you would see the status of one of the session as running/processing whenever you would execute the Rule Set or for that matter any calculation or request. If the Rule Set is executed completely, this session which was showing status as Running/Processing would disappear, on refresh.
Hope this helps.
Regards,
-SM

Similar Messages

Latency setting issues, and other problems.

Hello, this is my first time posting on a forum, and I wouldn't be here if I didn't think this was an interesting problem.
My computer (Hardware listings below) has a microphone lag issue. I tested it by plugging in my microphone and recording the recording through speakers, and it is very clearly lag. I am in need of a solution to that, but that is just where my problem starts. Whenever I try and load in an MPEG4 audio file, it seems to play and then all of my sound goes out on my system. Sometimes the sound goes out immediately after opening the program. The way I treat it is by putting my computer to sleep and waking it up, and the sound then returns until the program decides to randomly shut it down again. The mixing tables are reacting on screen, but there are no system sounds coming out at all. On top of that, when trying to fix my latency issues, it didn't help enough moving it down to 30 on the hardware options for the MME settings. It could be my computer is too slow or something, but I also tried switching it to asio. I have ASIO4all and I don't know if I should be running it, as I don't know too much about how my system would interact with all of these programs. I run Audition 5.5 fully legally, and I can update with whatever. I just want to be able to overdub without any lag, and everything I do to try and fix it makes a new problem happen. I am using a microphone plugged into the 3.5mm microphone slot on the motherboard. It's a Sure mic plugged in through an SLR to Quarter Inch male cable
SYSTEM:
Built
OS: Windows 7
Motherboard: EVGA P55 FTW 200 SLI
Processor: Intel I-5 760 quad core
RAM: 16 gigs Corsair XMS3
Video card: EVGA GTX 460 SE
Hard drive: W.D. Caviar Black 7200 RPM 1TB
Coolermaster storm scout case
Disc drive and Corsair power supply
If anybody knows any part in fixing or at least telling me why I have issues with all of the information I provided, I would love to hear it. I just want to record so badly after spending all of this money on the software and hardware and cables and etc...
Thank You

If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 631-3811.
- Peter

Utility disk repair issue and information

I attempted to perform a utility disk repair and these are the details I received. How do I fix these? Why did I attempt a repair you ask? After I log out and select sleep, my machine goes into high fan speed cooling operation and I cannot get out of it unless I unplug the computer.
Many thanks in advance,
Repairing permissions for “Macintosh HD”
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Permissions repair complete

See the following: http://docs.info.apple.com/article.html?artnum=306925

I have tried to download Firefox, and my screen shows Firefox setup 3.6 at the bottom. How do I get Firefox? I can never get beyond the set up and information screen.

I downloaded Firefox 3.6. It asks me if I want tot save it. I enter save. Then it goes to the introduction to the features of Firefox. How do I go beyond that. Also, if I leave the site, ie-get off the internet, then get back on later, the website again asks me if I want to download and save Firefox 3.6.

After you download '''Firefox Setup 3.6.3.exe''', you must double click on this file. Usually, you can find this either on your desktop or in your Downloads folder.
Your Downloads folder is located inside Documents.

I'm not receiving emails from 2 specific domains to my .mac email. Both have the correct address and I don't have any rules set up. Anyone know why this is happening?

I'm not receiving emails from 2 places. I don't have rules set up and both senders have the correct address. The messages aren't in my junk folder either. This is for my.mac account. Anyone know how to fix?

That just sounds like the mail headers. Most people don't know (or care) about them so they're usually hidden.
Check Mail -> Preferences -> Viewing -> Show header detail
I'm guessing it's set to 'All'. Switch it to 'Default' or None as you prefer.

Downloading a single rule set out of N rule sets.

HI All,
We have defined 4 Rule sets for one particular system. Out of these one is the global rule set. Now, my requirement is to have oe more rule set, with 80% rules from global and then add the rest 20% myself. Would like to know if there is any way we can achieve this efficiently, other than creating manually all the 80% rules from GLOBAL rule set.
Thanks a lot in advance.
Regards,
Hersh

HI Jose,
Well what you guided was perfectly fine an true in case of making changes to GLOBAL rule set. But any idea how we can make a new rule set out of the custom rule set i have already made.
I have , in all 4 rule sets present at the moment in GRC - GLOBAL, CUST -1,2 and 3. Now, my requirement is to have a copy of CUST1 into new rule set CUST4, and I manually later on need to update CUST4 for some more risks in it. The problem i am facing is whenever i download the existing rule sets, it is not giving me an option to download just CUST1, but all of four rule sets get downloaded together. Whereas, i need just a copy of CUST1. Any ideas on this?
Regards,
Hersh.

V10 - RA&R Rule set (Transport)

Hi,
We have heard that the new rule set in AC canu2019t be transported through the environments (DEV, QAS and PRD) in 10 as itu2019s seen as master data. Does this mean we maintain this in PRD?
Is this true?
Regards, Melvin

x
Hi,
I have a question regarding the rule sets. We do continue
changes on our rule sets as business risk services. We have found that we can
transport the rule set through transaction GRAC_RULE_TRANSPORT but have found
that this takes through the complete rule set. We are also aware that these
rules can be uploaded and downloaded directly in production.
My question what is the correct way in doing rule set maintenance
and what will be audit accepted.
Please let me know your feeling around this and any
practical ways you guys implemented will be appreciated.

I am very annoyed at the Creative Cloud set up and the non-stop issues and problems

I am very annoyed at the Creative Cloud set up and the non-stop issues and problems! I am paying monthly for this service and it is constantly failing in some way! So far in three months I have had to uninstall and re-install Photoshop THREE times because it stopped working properly and Illustrator I have had to do that same to TWICE! That isn't including the other apps that have had issues! I don't have the time to constantly be un-installing and re-installing all or some of the Creative Cloud because your developers are not making a product that works consistently for the money you are charging! It is costing me more than just this monthly fee! And I am even less impressed with the fact that I cannot email someone for assistance in resolving these issues. Really Adobe?

Adobe contact information - http://helpx.adobe.com/contact.html may help

Need information on the new RAR Rule Architect/Rule Set functions

Does anyone have any information on the new 5.3 functions listed under Rule Architect/Rule Sets, specifically the Compare function?
My 5.3 Config manual mentions this area but doesn't describe anything about it. I have a request from our user group and need to determine if this can fit that request.
What they are looking for is an easy way to compare our RAR Rule Set with the latest SAP version (Q2 2010 is the most recent I believe). Just from the screen shots, it looks like we could maybe use the Rule Sets functions for that. Load the new SAP one into RAR as a separate ruleset and then run this Compare function. However I haven't been able to find any documentation on this function, so I don't know if it really does what we are looking for.
Thanks.

Hi,
the error 'NullPointerException ' is very common error in GRC.
kindly search, you will find lots of threads and notes on thi.
check you permission TXT file. It contain null value some where.
especially check SD01 & SD02 tcodes.
Also open permission file in word and check all TAB's and ENTER's in technical view.
Regards,
Surpreet

SoD rule set Download issue

Hi All,
While downloading the SoD rule set (Global), I am not getting the data for Function-Action and Function-Permission, except these, rest of the data are coming.
But, I can get to see these data under tables: GRACFUNCACT and GRACFUNCPRM.
so obviously we can't have these data exported from table and to get converted into .txt format to upload SoD.
GRCFND_A is at SP14.
Please help in getting this issue resolved.
Thanks,
Ameet

Hi Ameet,
You have to reactivate it each time you install a SP in order to get the updates.
If you develelop your own SoD ruleset you wont use the SAP standard functions and risk, so reactivate the BC Set wont cause any problem.
If you change the standard functions and risks (which is wrong) such changes will be overwritten when reactivate the BC Set.
After reactivating the BC set you'll be able to download SoD rules fom the logical system SAP_R3_LG.
Cheers,
Diego.

My ipod nano isn't syncing when I try and change the setting in manually, but is however syncing when I launch the itunes by plugging it in. I'm wondering if anyone has had this issue and/or had been able to fix the problem?

My ipod nano isn't syncing when I try and change the setting in manually, but is however syncing when I launch the itunes by plugging it in. I'm wondering if anyone has had this issue and/or had been able to fix the problem?

Do you have any better luck with that if you update to iTunes 10.6.1.7?
From the notes for the release:
iTunes 10.6.1 provides a number of improvements, including:
• Fixes several issues that may cause iTunes to unexpectedly quit while playing videos, changing artwork size in Grid view and syncing photos to devices.
• Addresses an issue where some iTunes interface elements are incorrectly described by VoiceOver and WindowEyes.
• Fixes a problem where iTunes may become unresponsive while syncing iPod nano or iPod shuffle.
• Resolves an ordering problem while browsing TV episodes in your iTunes library on Apple TV.
http://www.apple.com/itunes/download/

Issue with Information broadcasting and pre-cal server in SAP BI

Hi Experts,
I have issue with information Broadcasting and Pre-cal server. I have a worrkbook whcih runs from information broadcasting in pre-cal server. Workbook is desinged on single query and workbook contains visual basic code. workbook has a variable which is controlled by Control query in information broadcasting.
I have 20 employees every month I need to send workbook via e-mail from information broadcasting. The problem is sometimes all 20 employees will recieve e-mails and sometimes not. I identified there is something wrong in workbook or in pre-cal server.
because after workbook calculation in pre-cal server is not pushing to SOST so there is something wrong in workbook or in pre-cal server.
I closely observed pre-cal server front end log. There are few operations performing on workbook in pre-cal server
like Open workbook, Calculate workbook, Save woorkbook and close workbook. In success case pre-cal sever is performing all the operations but in failure case pre-cal server is missing Close workbook case.
Below log In pulled from pre-cal server
Can you please tell what could be the problem.
Successful job
3/11/2011 9:29:46 AM (3) -> RS_PREC_LAUNCH_EXCEL i nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
2PCUG9ZPPP'. nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
3/11/2011 9:29:46 AM (3) -> InitConnection in thre ad 3
3/11/2011 9:29:46 AM (3) -> Trying to open "C:\Pro gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
xla" gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:30:35 AM (3) -> Using Version 7100.4.1 200.35 of BExAnalyzer.xla
3/11/2011 9:30:35 AM (3) -> PID of Excel process: "2504"
3/11/2011 9:30:35 AM (3) -> EndOfInitConnection in thread 3
3/11/2011 9:30:35 AM (3) -> RS_PREC_LAUNCH_EXCEL f inished
3/11/2011 9:30:36 AM (0) -> Calculation Request 91 1A35ED029D4D79DD7A000200000000 received for job 'B
IBCAST4L4EIS7TOR5BWG02PCUG9ZPPP'. 1A35ED029D4D79DD7A000200000000 received for job 'B
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:31:22 AM (0) -> Opening workbook: C:\W INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
DVLYAPC2SYIC7F1AAIO_0.xls INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
3/11/2011 9:31:43 AM (0) -> Refresh BExAnalyzer.xl a!MenuRefreshPrecalc returned with 1.
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls saved. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls closed. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:44 AM (0) -> Excel based operations finished.
Failure job
3/10/2011 10:22:58 AM (1) -> RS_PREC_LAUNCH_EXCEL invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
TGJR0462ZFX'. invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
3/10/2011 10:22:58 AM (1) -> InitConnection in thr ead 1
3/10/2011 10:22:58 AM (1) -> Trying to open "C:\Pr ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
.xla" ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:23:44 AM (1) -> Using Version 7100.4. 1200.35 of BExAnalyzer.xla
3/10/2011 10:23:44 AM (1) -> PID of Excel process: "2544"
3/10/2011 10:23:44 AM (1) -> EndOfInitConnection i n thread 1
3/10/2011 10:23:44 AM (1) -> RS_PREC_LAUNCH_EXCEL finished
3/10/2011 10:23:44 AM (5) -> Calculation Request 9 11A35ED02654D789871000900000000 received for job '
BIBCAST4L41566ZBZDN2NTGJR0462ZFX'. 11A35ED02654D789871000900000000 received for job '
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:24:31 AM (5) -> Opening workbook: C:\ WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
A8O8D8FBHYCR4HVB5UI8_0.xls WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
3/10/2011 10:24:52 AM (5) -> Refresh BExAnalyzer.x la!MenuRefreshPrecalc returned with 1.
3/10/2011 10:24:52 AM (5) -> Calculated workbook C :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
2VEA8O8D8FBHYCR4HVB5UI8_0.xls saved. :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
Thanks in advance
Narendra

Hi Ravikanth,
Thank you very much for the reply
I went into RSPRECADMIN and clicked on 'Display Current Queue'. There we have 3 sections
1) Queue Overview of Open Precalculations
I can see this section is always blank after running IB also
2) Queue Overview of Current Precalculations
In this section I can see an entry after running IB and duration is changing. but some time workbook in this section will never processed but the duration column is changing may be something is happening at this stage.
If the entry is not proccessed in this section and IB SM37 job will never end. I manually cancelled the job from SM50.
Don't why the workbook is taking long time and will never end even though I cancelled the SM37 IB job.
3) Queue Overview of Proccessed Error-Free Precalculations
All the error free workbooks which means all pre-cal server completed workbook calculation and sent to SOST.
I manually ran the workbook for all the 20 employees I can't find any pop-up message (earlier we have pop-up windows appearing because of VB code and when report returns no data and we fixed the pop-up issues)
Can you please help me further to trace the error.
Thank you
Narendra

I just bought something via my debit card but since i set my payment menthod to none and now i cant set my payment information back ...Its declined my card how i can solve this problem thankyou

I just bought something via my debit card but since i set my payment menthod to none and now i cant set my payment information back ...Its declined my card how i can solve this problem thankyou

I think the problem lays with Last.fm. I had the same exact problem as you. In your processes screen, end the task "lastfmhelper.exe" Last.fm still scrobbles. The tracks don't skip, although I notice there is still a bit of a lag in the first part of the song - but if you can deal with that, no skipping. I think you will have to end that task everytime you boot up your computer, or uninstall last.fm completely until they fix it; it is a bug in their software, as opposed to iTunes.

Images appear fine in Photoshop cs6 and cc, but print too dark, and also show too dark in Windows picture viewer. How can I correct this? Is this a Photoshop setting issue or what?

Images appear fine in Photoshop cs6 and cc, but print too dark, and also show too dark in Windows picture viewer. How can I correct this? Is this a Photoshop setting issue or what?

Ok, look at your files in Photoshop. What is the profile assigned to them? You can find this out by going to the Status bar at the bottom, clicking on the right-pointing triangle and choosing document Profile from the list.
Then in Windows, go to your Control Panel > Color Management and add sRGB (if it isn't there) and select it as your default profile.
I hope that will work.

I am trying to set up rules in iCloud and gmail on my server, does anyone know how?

I am trying to set up rules in iCloud and gmail on my server, does anyone know how?

Thanks for the advice King, but my newly bought iPad2 still isn't showing what the manual (downloaded from the iPad site) says. Also, when you say that there should be a "More" button in the music app (I assume you mean the item under Settings) I am afraid there isn't anything like that either. The page has iTunes Match, Sound Check,EQ,Volume Limit, Group by Album Artist and then the Home Sharing section with my Apple ID and Password. That is all. Maybe I need to find a better User Guide for 5.0.1? Your further input will be much appreciated.
APS Csontos

Rules Set Issues and Information

Similar Messages

Maybe you are looking for