Rules work for incoming mail but not sent?

I'm sorry if I'm being particularly dim, or if that answer to this should be easily discovered. I've looked and can't sort it out. I have several groups set up in Address book. I have a folder in Mail to which all mail from some group is moved via a rule. I would like the mail that I send to those groups, or individual members of the groups, also sent to that folder.
I have tried by adding to my rule, "To" "contains" "person's name" and "To" "contains" "person's e-mail address", with the actual name and e-mail address typed in the third field.
Am I missing something?
Thank you in advance for any help.

Am I missing something?
Yes. If you open Mail Help and read the articles that explain how rules work, you'll see that they're applied automatically to incoming messages only. You may want to take a look at the following thread for workarounds:
Rules for outgoing mail

Similar Messages

TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

Sorry for the delay...
I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
Thanks for the help, anyway!!

Airplay works for one user but not for another on the same machine

I have the problem where airplay works for one user but not for another and both users are on the same machine. For the user where it does not work, everything appears normal, it's just that there is no sound being transmitted. I have tried restarting the Airport express, restarting iTunes, repairing disk permissions. Any ideas about what can be done to resolve this?

my /etc/group:
root::0:root
bin::1:root,bin,daemon
daemon::2:root,bin,daemon
sys::3:root,bin
adm::4:root,daemon
tty::5:
disk::6:root
lp::7:daemon
mem::8:
kmem::9:
wheel::10:root,hans,ibm,gast
ftp::11:
mail::12:
uucp:x:14:
log::19:root
locate:x:21:
smmsp::25:
http::33:
games::50:
network:x:90:
video:x:91:
audio::92:ibm,gast
optical::93:hal
floppy:x:94:hal
storage:x:95:hal
scanner:x:96:
power:x:98:
nobody::99:
users::100:gast
dbus:x:81:
hans:x:1001:
vboxusers:x:108:hans
policykit:x:1002:
hal:x:82:
kvm:x:78:
nx:x:85:nx
avahi:x:84:
camera:x:97:
gdm:x:1003:
gast:x:1004:

My apple tv will not authenticate my nba league pass login--I am in the United States and the same login/pw works for my iPad, but not for apple tv.

My NBA League Pass login cannot be authenticated -- I am in the United States and the same league pass name and password are working for my iPad, but not for my apple tv.

I have this same issue and am becoming quite upset. NBA has absolutely no contact information to call and resolve this issue. I just spent $139.99 and cannot connect to Apple TV, while the same login works just fine on my iMac and iPad. When I signed up, the information provided indicated that I could view live games on Apple TV. What the ****?

After downloading the new lion os x 10.7.2 with cloud and lion recovery update my internet doesnt work. I have tried 2 different networks that work for other people but not me. help?

After downloading the new lion os x 10.7.2 with cloud and lion recovery update my internet doesnt work. I have tried 2 different networks that work for other people but not me. help?

Logic's preference files may have become corrupted:
1. Quit Logic Pro
2. In the Finder, press and hold down the "option" key then select "Library" from the "Go" menu
3. Open the "Preferences" folder
4. Drag the following files to the Trash:
    - com.apple.logic.pro.cs
    - com.apple.logic.pro.LSSharedFileList.plist
    - com.apple.logic.pro.LSSharedFileList.plist.lockfile
    - com.apple.logic.pro.plist
    - com.apple.logic.pro.plist.lockfile
These files will be re-created when Logic is next opened.

I use Photoshop Elements 11 to print panoramas. Works for jpeg images but not tiff. Suggestions?

I use Photoshop Elements 11 to print panoramas. It works for jpeg images but not for tiff images. Seems strange because PSE11 manages tiff images in all other processes. Anyone fared better?

Thank you for your trouble.
My images are not usually layered and the particular case I am about to quote, it is not. The dimensions are 10,546 x 2,790 and the image has 16.7 mbs. I use 8 bit colour. When I set up the print screens for tiff, everything is normal until I get to the last screen with the image set upon the photo paper. Then the paper size indicated with the image refuses to budge from the A4 size, so the panorama gets printed on that. I consulted the Adobe chat line and the expert could 't get it to work either. So he came to the conclusion that the tiff capability had not been extended to printing panoramas. In seeking advice, I thought someone might refer me to an updating patch!
Well done! You have confounded the system! I could not find any control that would override the setting.

Classic - text ringtones work for one contact but not for others

Just got the new Blackberry classic. I'm having trouble with the ringtones for the text messages. The custom ringtone works for one contact but not for the others. I have taken the same custom ringtone that works for contact A and used it for contact B but it only works for A. B sounds the default ringtone from the default profile instead of the custom ringtone.
I have deleted all contacts and done a re-sync thinking something was corrupt. That didn't work.
None of the contacts have a link.
I have changed the notification profile and it still doesn't work.
I have deleted a contact and recreated it manually. It still doesn't work.
I finally deleted my dad's contact and from the phone app created a new contact. I set a custom ringtone for him and it worked. I of course had to recreate all his other information manually. Please tell me there is some other way to fix this than recreating manually all 147 contacts in my contact list.
I read that if the phone number has the hypen or space it won't work, but my dad's contact info that I created from the phone app has the hypen and it rings with the custom ringtone. Also contact A has no hypen in the phone number and it rings the custom ringtone. So that didn't seem to matter.
I have spent hours on Google and see that lots of people have had this problem (but not everyone) but have not yet found a solution.
Surely someone has found a fix for this issue.

Make sure that the contact has "Mobile" as the field for her number and not "iPhone".
Note that the iPad cannot send SMS messages.

I have an iphone 4s. able to receive all the incoming mails but not able to send mails through this iphone 4s. please help.

I have an iphone 4s. able to receive all the incoming mails but not able to send mails through this iphone 4s. please help.

delete and reinstall the email account.

My apple ID will work for uk itunes but not work for canadian itunes. Why?

My apple ID will work for uk itunes but not work for canadian itunes. Why?

http://www.apple.com/legal/internet-services/itunes/ww/

Magic Mouse One-Finger Swipe Works for one user but not the other

For the main account on my iMac, I can use a single finger swipe to move back and forward within Chrome. However the second user (also an administrator) cannot use this setting and must instead use the two finger swipe in settings. Both settings are identical but the Chrome browser wont recognize the single finger swipe for the second user. The gesture works fine in Safari, but not Chrome. Any suggestions?

my /etc/group:
root::0:root
bin::1:root,bin,daemon
daemon::2:root,bin,daemon
sys::3:root,bin
adm::4:root,daemon
tty::5:
disk::6:root
lp::7:daemon
mem::8:
kmem::9:
wheel::10:root,hans,ibm,gast
ftp::11:
mail::12:
uucp:x:14:
log::19:root
locate:x:21:
smmsp::25:
http::33:
games::50:
network:x:90:
video:x:91:
audio::92:ibm,gast
optical::93:hal
floppy:x:94:hal
storage:x:95:hal
scanner:x:96:
power:x:98:
nobody::99:
users::100:gast
dbus:x:81:
hans:x:1001:
vboxusers:x:108:hans
policykit:x:1002:
hal:x:82:
kvm:x:78:
nx:x:85:nx
avahi:x:84:
camera:x:97:
gdm:x:1003:
gast:x:1004:

HELP!! WRT54G2 works for one computer, but not for the other

I have a WRT54G2 and it is connected to 2 computers. The internet works in one computer, but not on the other. The tech support said i needed to configure it or firmware or something like that. But my product is out of warranty and I really need the internet on the other computer as well. Please Help!!!

As your one computer is working fine then there is no problem with the router so far...
The computer which is not working...check the IP Address on that...
Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
If yahoo times out then provide static DNS on your LAN Connection...
Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local Area Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 192.168.1.1>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online...

HT4597 My password works for mobil me but not my mail account.

I have had a mac account for years. For some reason it is not accepting my password. It is the same password for Mobil Me. My mobil Me works, my iPhone mail works but all of a sudden my mail on my MacBook Pro does not work. Please help.

On your phone: Settings>Store...tap the Apple ID shown, sign out, then sign back in with the ID you want to use.

Yahoo works on iPhone mail but not iPad2 mail

I have an Mac, Google and a Yahoo mail account. The Mac and Google work on the MBP, iPad2 and iPhone with both the mail app and via Safari log in. Yahoo works on the MBP and iPhone via Mail and Safari but does not work on the iPad2 via the Mail App but wil work on the iPad2 via Safari. I have deleted the account from my iPad2 and tried to reinstall it but i keep getting a message that the "Server is not available, please try again later". This is the same error message I got from my iPad Mail app before I tried deleting the Yahoo account and reinstalling it. This problem started about a week ago. The only added App was an EMail Client on the MBP - Inky.
MBP is on 10.8.2, OS X Safari is 6.0.2, iPhone & iPad2 are on IOS 6.0.1,
Any ideas would be appreciated, Thanks,
Bill

I just found this. It worked for me and I was getting the same error message as you. https://charlesshearnontech.wordpress.com/2012/12/26/ipad-ios6-yahoo-mail-doesnt -work-missing-password-error-message/

Rule works in web interface but not in DIS

I have a global rule that restricts metadata shown/updated for non-admin users which works very nicely
(((dpEvent like "OnRequest" or dpEvent like "OnSubmit") and
(dpAction like "CheckinSel" or dpAction like "CheckinNew" or dpAction like "Info" or dpAction like "Update")) and
isFalse(userHasRole("admin")) and
isFalse(userHasRole("WCCAdmins")))
One of the fields in the rule has a derived value which sets its value to the folder in which the document is checked in
<$dprDerivedValue=#local.fFolderName$>
This all works great from the traditional web interface (not the ADF one ) but if a document is dropped into a folder in DIS or checked in from an office document, the rule is applied and the check in metadata is restricted as specified in the rule but the derived field is not populated

Ah yes, I achieved the same thing by removing all the rules except the userHasRoles and of course it works for all events. Odd that the field hiding rules were still working when I chose the check-in form option from 'save as new' in an office document maybe because one of those events was firing when that choice is made , but I'd swear it didn't apply the derived field,anyway, I have it working now with less conditions and I learnt something new about DIS so thanks.
Martin

Why would code work for an application but not an applet?

Hey there,
i'm trying to build a java ftp upload applet. I'm using the enterprisedt ftp class.
The code works fine when i run it as an application but not when i put it in the applet. The applet has been signed and is running off a plug in. I get no error messages, just nothing happens.
Would really appreciate some comments.
regards
hagen
the code
FTPClient ftp = new FTPClient("****");
ftp.login("user1", "***");
ftp.put("C:/INSTALL.log","test.log");

hi
im a manuel, from argentina
i would appreciate too much if you can give me that piece of code
i need for a site, an applet that could read files the visitor chosse from his pc and then upload that files to a server
is it possible?? you could help me ?
i think i need to sing my applet alright? how i do this? how it cost??
if anyone can give my a bit of code, to star�t programming, ill be very happy!
thanks!
mi mail: [email protected]

Rules work for incoming mail but not sent?

Similar Messages

Maybe you are looking for