Run a process when leaving a page

Hello,
Is it possible to run a process when users leave a page?
Let me explain:
On a page, I have an Automatic Row Processing (DML) and a PL/SQL process. These two process are run when users click on the "Apply change" button.
Is it possible to run these two processes ALSO when users leave the page (click on another tab) ?
I want to do this to make sure that the changes are saved, even if users forget to click the "Apply Changes" button.
Thank you in advance for your help.

Have you looked into using a pl/sql dynamic action page unload event? I haven't tried before but if you set the item values in the first step of the dynamic action and then execute a pl sql routine that mimics the DML it may work. Since the action would fire after every page unload, it would also probably need some validation to ensure it does fire during normal processing.
Ricker

Similar Messages

Is there any listener when leaving the page?

Hi,
I use JDev 11g,
I use this
*((DCIteratorBinding)this.getBindings.get("MyIterator1")).getViewObject().getApplicationModule().getTransaction.isDirty();*
to know if there is a change happen in database or not
I want to check this change when I leave the page.Where can I write this code? Is there any listener when leave the page or not?
Thank You.
Sameh Nassar

Thank You Sireesha,
I make a class which implements interface PhaseListener and implement 2 methods (beforePhase and afterPhase).
then I write
<lifecycle>
<phase-listener>MyClass</phase-listener>
</lifecycle>
in faces-config.xml file
thank you.
Sameh Nassar

Display a warning when leaving a page

Hi,
I have created multiple APEX pages and would like to create a warning when leaving a page when changes are made to the page. Iam new to APEX and javascripts. We are using Oracle APEX 4.1, connecting to a 11 g database and Internet Explorer 8.0. I have seen postings from older versions of APEX and have attempted to use the logic and receive multiple screen prompts. I appreciate your assistance with this challenge.
Thanks
Don

Hey Don,
Have a look at the save before exit plugin.
http://skillbuilders.com/plugins
Demo
Good Luck,
Tyson

PSNT won't run a process when its defined as the server name

Hi Everyone,
We have just upgraded our environment, previously, we were using PSUNX as our only process scheduler. after the upgrade, we are now using PSNT only. however, we have a very curious issue with the process scheduler.
When we run a process online (menu>peopletools>process scheduler>system process requests) and choose PSNT as the server name, we immediately get the error below:
+"The process XRFMENU has category that is not processed in server PSNT (65,279)+
+The system detects that the process with the designated server is currently defined to not initiate requests with the process' category. Please choose another server to + +schedule this process. Alternately, you can specify a blank ServerName to allow the scheduler determine the available server the process can be initiated."+
But when we leave the server name as blank, it runs perfectly fine, using PSNT as the process scheduler.
and what's more interesting is, when we open the process definition (XRFMENU for this example) and edit the description then save the process definition. It will then run fine even if we use PSNT as the server name.
Any ideas on why this is so?
We are not using masterscheduler on our server. we have already tried removing the row from prcsdefn then inserting it back but it doesnt work.
thanks in advance.
Edited by: 974596 on Jan 8, 2013 3:30 AM
Edited by: 974596 on Jan 8, 2013 3:31 AM

see this doc for a description and resolution
E-UPG: The process <process name> has category that is not processed in server <process scheduler> (65,279) [ID 1327015.1]
https://support.oracle.com/epmos/faces/DocContentDisplay?id=1327015.1

EPCM error when leave Webdynpro page ???

In Portal, when navigate from page with webdynpro iViews to any other workset or page, clicking in some node of the top level navigation, opening a windows alert popup , and said: Exception in EventDistribute occurred. Throw it to upper level?
And then click accept 4 times let me continue.
After trying multiple alternatives, the issue certainly is occurring when: I am in a page with at least one webdynpro java, and I go to another. That is, to leave or close the webdynpro iView has generated the problem.
When I choose "debug" the exception with MS Dev studio, I found this error code, this is the point when the exception raise:
EPCM.eventDistribute=function( consumers, eventObject, resultArray){
var isRetValCollect=(resultArray != null);
var eListener
var retVal;
for (var idx in consumers){
eListener=consumers[idx];
retVal=null;
try{
retVal=eListener.call( eventObject );}
catch( e){
if (EPCM._private.dbgException){
if(confirm("Exception in EventDistribute occured.\nThrow it to upper level ?")) throw(e);}
if(isRetValCollect && retVal != null){
resultArray[resultArray.length++]=retVal;}
any suggestion ?????
thanks in advance!
Leandro.

Add this: not only when leave a webdynpro iview or page is the problem, also when resizing a webdynpro page in the IE.
Any change in the screen size, raise this popup error
any idea???
thanks in advance

Flash player is crashing when leaving browser page

I have Firefox 26.0 and the newest version of Flash player as of 13/1-14
My issue is not happening all the time, but a LOT. Whenever I've watched a Youtube video and then wanting to go back(leaving the browser page) it freezes and crashes. I have the option to keep it running or shutting it off, which eventually helps. Disabling the Flash player helps, not keeping it running.
I don't care for whatever reason it's not working, but you either fix this or get me a new keyboard, because of the immense amounts of irritation this ridicolous issue causes.
I'm sorry the warning is in Danish, but it says that the Shockwave Flash Player is either occupied or crashed. I can either stop the plugin or let it keep trying(why is that even an option? It does not try anything at all.. Except from keeping the browser frozen for a few more centuries..)

Download the following files (Right click and "Save Link as"):
Shockwave Player Uninstaller
Flash Player Uninstaller
Flash Player Plug-in (All other browsers)
Shockwave Player 12 FULL Installer
Reboot.
Run the Uninstallers from your Downloads folder, to remove BOTH Flash Player and Shockwave.
Go to: C/Windows/System32 and delete the Macromed folder.
Go to: C/Windows/SysWOW64 and delete the Macromed folder.
Open your Windows Registry Editor (Start>Run or press the Windows key+r. Tpye "regedit" [minus the quotes] and click OK.
In the Registry Editor, go to: HKEY_LOCAL_MACHINE/SOFTWARE and delete the Macromedia folder.
Go to: HKEY_CURRENT_USER/Software and delete the Macromedia folder.
Close the Registry Editor and empty your Recycle bin.
Run the Shockwave FULL Installer first, and THEN the Flash Player Installer. These are offline installers and will require no connection during the process.
If problems persist, try disbaling other plugins and extensions for Firefox, to determine if one or more is conflicting with Flash and Shockwave.

Prompt to save the chages when leaving the page

Hi all,
I have the following scenario:
I have a plsql region with 15 records pro page with text fields and checkboxes.
When the user does update any field and navigate to other page (or clicks to other pagination page) without click on the button "SAVE" or "CANCEL" I would like to show him the confirm dialog "The changes was not saved. Save it?" or anything like this.
Is it possible?
Thanks

Hi,
Have a look at this thread to see if it helps you:
Re: detecting changes to items prior to submitting page
Andy

Chrome, Firefox, IE all crash when leaving page with flash

   Hi,
I am running XP with SP 2 on a Intel Core Duo Dell machine. These are coporate machines. I've had two in the past two weeks and both are giving me the same error.
   After installing the latest flash player, all browsers are able to load a flash page. However, when leaving that page for another, all browsers stop responding. They don't crash, they merely freeze.
   Chrome indicates that the flash plugin has crashed and would I like to terminate it. The others simply stall.
   I've uninstalled, re-installed, rebooted.. etc.
   Interestingly enough, a fellow coworker who appears to have the same machine as I, does not have this problem.
   Any ideas on how to debug this ?
   Thanks
   J

i seem to have the same problem too....
chrome tells me that Shockwave plugin has become unresponse then says its crashed....
Firefox becomes unresponsive (i've left it in that state for quite a while..result nothing)
i uninstall flash using the uninstaller provided from adobe (or from add and remove programs, tried both options) and browsers run perfectly fine... of course access to flash content lost since i need the plugin...!
I'm running Vista Home Edition SP2
antivirus - AVG Free
particular websites that i use (all of them with flash content crash!!!) and that crash EVERY time - youtube, bbc.co.uk, facebook, gmail, f1-live.com, all sites with flash crash!!
i've tried everything i could find on firefox forums, chrome forums, and here... nothing works... now i'm gonna revert to flash 8 and try... hopefully adobe will respond to this problem... its not jus one or two who are facing this problem...!!

When I attempt to open firefox an error message appears telling me that firefox is already running, but I can't find it running. How do I do so or in any case close the already running Firefox process?

When I attempt to open Firefox instead of Firefox opening, an error message appears saying "Firefox is already running but isn't responding. To open another window please close the existing Firefox process or restart the system.", but I can't find that process of Firefox in order to kill it, and after restarting the system there is still the problem. I have found an emergency fix to at least get online, and that is to use"Firefox_Profile_Manager" in the start menu's "run" start menu, but the
Firefox that then opens is that one doesn't carry over what I had in my bookmarks but starts bookmarks anew.

Sounds like it is hanging when you exit and later try to restart Firefox.
* How to stop the running Firefox process
** In Task Manager, does firefox.exe show in the '''Processes''' tab?
** See: http://kb.mozillazine.org/Kill_application
**Windows 7 users: http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576
* What may cause Firefox to hang at exit
**Windows 7 Task Manager: http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576
** http://support.mozilla.com/en-US/kb/Firefox+hangs
** http://kb.mozillazine.org/Firefox_hangs
** https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding
* You may need to try Firefox Safe Mode
** You may need to use '''Safe Mode''' to locate the problem: ***See: http://kb.mozillazine.org/Safe_Mode
***Firefox 4 users, hold the Shift key while clicking the Firefox 4 desktop icon to enter Safe Mode.
***Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox.
****In Firefox 4, Safe Mode also disables Plugins and Hardware Acceleration.
****If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode (In Firefox 4, Tools > Add-ons > Appearance). See: http://support.mozilla.com/en-US/kb/Using%20themes%20with%20Firefox#w_managing-themes-and-personas
****When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode".
****Test to see if the problem you are experiencing is corrected.
*** If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it
***#by enabling '''one at a time''' until the problem reappears.
***#You can also enable a few at a time (3-5), keeping track of what you just re-enabled to see if the problem re-occurs; this will help narrow down the possibilities if you have a large number of add-ons.
***#'''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit).
***#You can use "Disable all add-ons" on the Safe Mode start window.
**See the following for more information
*** http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes
*** http://support.mozilla.com/en-US/kb/Troubleshooting+plugins
*** http://support.mozilla.com/en-US/kb/Basic+Troubleshooting
 
 
'''You need to update the following:'''
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*Shockwave Flash 10.2 r153
*Next Generation Java Plug-in 1.6.0_17 for Mozilla browsers
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml

Since I updated Firefox I have to constantly re log-in to my Yahoo account such as email. Every time I leave the page I have to log-in to get back into it. I also run OPERA and I do not have that problem with them. I stay logged in. Any suggestions?

I have windows Vista and have the updated version of Firefox. I also can run OPERA and LUNASCAPE with no problems. When running Firefox I have to constant re log-in to my Yahoo account every time I leave the page. For example: I log in to check my email on Yahoo and then leave my email page. Then when I return to recheck my email I have to log in all over again. I can't stay logged in. If I run my OPERA browser I stay logged in for days without having to sign in all over again.

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
"Remove Cookies" from sites causing problems:
Tools > Options > Privacy > Cookies: "Show Cookies"
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Get pop up window when leave the WD page

HI,
I always get a pop up window says "Please wait! Closing the application" when i leave the page which is inital running Web Dynpro applicaton url.
Is there any way we can disable the pop up?
thanks
yi

Hello Martin,
I have used this DLL before and wasn't asked to choose a codec. Maybe if you use all three functions (init, write, close), it works without problems. Here's a example that uses IMAQ hardware to acquire an 8-bit image at 30fps and writes each image to an avi file.
There are utilities to examine dlls (see what functions are exported and what the dependencies are, but you can't see source code since it is compiles.) Check out QuickView or DependencyWalker.
Attachments:
avigrab.zip ‏66 KB

Running on load two fetch processes on the same page

I have two separate regions on one page build on two tables which have a one to one relationship. I want to to query both regions at the same time when the page loads using the automatic fetch process. If I try to run both I get "NO DATA FOUND" error. If I run each one separately (by setting a never condition on the other process) then each region returns data without problems. Is this a limitation of APEX that you can only have one on-load fetch process per page?
Paul P

Hello Paul,
>> Is this a limitation of APEX that you can only have one on-load fetch process per page?
Ultimately, yes.
The ‘no data found’ error you see is not related to your data table but to an internal APEX package array that the ARF process uses. As you are using more than one ARF process on the same page, they both use the same database session, and that means that the packaged array is not clear between calls, and in certain situations that can lead to the error message you see. In any case, if an error message is not display, the populated items will only be from the last call to the ARF process.
As I see it, you have two options. One is to populate the form items manually. The second is to create a view on the two relevant tables, and build your form on the view (with the appropriate Instead Of triggers, if necessary).
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Forthcoming book about APEX: Oracle Application Express 3.2 – The Essentials and More

HT204023 Hi, I'm Puthyrath. I have a problem on my iPad 4 wifi-3G about personal hotspot. I entered apn, username and password correctly, but when I leave this page, it didn't save, all fields become blank. Can anyone help me?

Hi, I'm Puthyrath. I have a problem on my iPad 4 wifi-3G about personal hotspot. I entered apn, username and password correctly, but when I leave this page, it didn't save, all fields become blank. Can anyone help me?

Update to above question:
Hello All,
To anyone with the same problem described above, on THEIR iPad (if it is running iOS 7.0.2):
Go to Settings; Mail, Contacts, Calendars; DELETE your *******@btinternet.com e-mail account, that you originally set up either using 'Other', or the 'BT' option which I am sure was in the list previous to the iOS 7 update.
Then ADD a NEW account choosing YAHOO from the list of options. DO NOT USE 'OTHER'.
Enter the correct details just as you (almost certainly) had already done in your previous attempts using 'other'.
When you see the 'verifying......' and 'the blue ticks' you should be able to exit settings and open your mail app and then receive all your 'old' e-mails again, AND be able to SEND as well.
All my 'old' e-mails, were NOT found in the 'old e-mail' folder though. THEY are still in my inbox.
So this fix worked for me.
After I deleted my account from 'OTHER' and put it in Yahoo, I like other people also ended up with more folders.
I hope this works for you on YOUR Apple devices.
Bob

TS3694 Why can't I update my iPhone 4 to iOS 5.1? Every time I try it gets all the way done downloading it; however when it's processing the file the page tells me "There is a problem downloading the software for the iPhone. Network connection timed out.

Why can't I update my iPhone 4 to iOS 5.1? Every time I try it gets all the way done downloading it; however when it's processing the file the page tells me "There is a problem downloading the software for the iPhone. Network connection timed out. Make sure your network settings are correct and your network connection is active. or try again later." and next to the file it has err = -3259. I have tried this 17 times and it won't work. My iTunes is completely up to date. I have made sure that my connection is fine and I have tried turning my firewall off with no avail. This has happened to me before but usually the update will go through after 2-3 tries, never to this extent. I don't know what to do. Help!

Error -3259 is a network timeout error, usually. This article might help:
http://support.apple.com/kb/TS2799

Since updating to FF 5.0, I can no longer access my MAMP server (Mac/Apache/MySQL/PHP) Wordpress development site on my Localhost computer (MacBook Pro, OSX 10.6.4). Why not? It's running EXTREMELY SLOWLY when I try to access the pages on my site.

PROBLEM WITH LOCALHOST SITE LOADING VERY SLOWLY (IF AT ALL) AFTER I UPGRADED FIREFOX TO 5.0 FROM 3.6
I have been successfully running MAMP, a personal Apache server with MySQL, on my MacBook Pro using OSX 10.6.4. This is so I can create a Wordpress blog locally to later upload to my remote website.
Yesterday, I updated my Firefox browser from 3.6 to 5.0 (and added the following extensions: Better Privacy 1.51, Bloody Vikings! 0.5.3, Copy as HTML Link 2.0, Firebug 1.7.3, Firepicker 1.3.4, NoScript 2.1.1.2, and Ultimate Free Stock Photo Search Add-on 1.0.1, TypeGauge 0.5, and Zotero 2.1.8)
Now, I'm having trouble: At first, MySQL database server in MAMP wouldn't turn on at all. I restarted both Firefox and MAMP a few times. Finally, MySQL turned on and MAMP started to load into the browser. But it got only as far as the top bar on the MyPHP page, and would not load the rest of the page. Finally, pages do load, but I'm getting a "Waiting for localhost…" message looping at the lower left screen for a VERY LONG TIME (30-60 sec?) before my localhost web page appears (sometimes it says "Read localhost…").
But even when the localhost pages appears, it continues to run VERY SLOWLY when the browser tries to load the pages (although it runs a little less slowly when I use only the backend Wordpress administration pages). In short, it seems that something is stopping Firefox from accessing the MySQL database properly so that my site can show up as quickly as it did before.
Since this mess only happened after I upgraded to Firefox 5.0 and added the plugins, and nothing else has changed on my computer, it seems the Firefox 5.0 app and/or an extension is the culprit.
Can you advise me ASAP about what to do? If not, I'll have to downgrade to 4.0 or something. I've got deadlines to meet.
Thank you.

PROBLEM WITH LOCALHOST SITE LOADING VERY SLOWLY (IF AT ALL) AFTER I UPGRADED FIREFOX TO 5.0 FROM 3.6
I have been successfully running MAMP, a personal Apache server with MySQL, on my MacBook Pro using OSX 10.6.4. This is so I can create a Wordpress blog locally to later upload to my remote website.
Yesterday, I updated my Firefox browser from 3.6 to 5.0 (and added the following extensions: Better Privacy 1.51, Bloody Vikings! 0.5.3, Copy as HTML Link 2.0, Firebug 1.7.3, Firepicker 1.3.4, NoScript 2.1.1.2, and Ultimate Free Stock Photo Search Add-on 1.0.1, TypeGauge 0.5, and Zotero 2.1.8)
Now, I'm having trouble: At first, MySQL database server in MAMP wouldn't turn on at all. I restarted both Firefox and MAMP a few times. Finally, MySQL turned on and MAMP started to load into the browser. But it got only as far as the top bar on the MyPHP page, and would not load the rest of the page. Finally, pages do load, but I'm getting a "Waiting for localhost…" message looping at the lower left screen for a VERY LONG TIME (30-60 sec?) before my localhost web page appears (sometimes it says "Read localhost…").
But even when the localhost pages appears, it continues to run VERY SLOWLY when the browser tries to load the pages (although it runs a little less slowly when I use only the backend Wordpress administration pages). In short, it seems that something is stopping Firefox from accessing the MySQL database properly so that my site can show up as quickly as it did before.
Since this mess only happened after I upgraded to Firefox 5.0 and added the plugins, and nothing else has changed on my computer, it seems the Firefox 5.0 app and/or an extension is the culprit.
Can you advise me ASAP about what to do? If not, I'll have to downgrade to 4.0 or something. I've got deadlines to meet.
Thank you.

Run a process when leaving a page

Similar Messages

Maybe you are looking for