Run a section of code a certain time of day

I have a problem which I am stuggeling to get right.
At a certain time of the day, the process must run a verification sequence which must be completed.
I was thinking about using two time values, the one being the actual time and the other being the target time. Once the actual time is equal or more than the target time, some code must run. This code must run (verification sequence) before any other code can run.
Please any advice would greatly be appreciated

Lucither wrote:
Hein,
This will be true when current time is equal or greater then the set time:
Rgs,
Lucither
The suggestion above are correct in answer the question "how to compare times?" but there is an ancillary question that goes with this challenge that being "What time value do I compare with the current time?"
Sounds simple at first glance and in most situations is a no-brainer UNLESS your app is a 24X7 365 day never go down app. In that case you have to deal with Daylight savings time (Lets ignore leap years seconds etc for now). With DST, we have to deal with the fact that there is one day with 23 hours and another day with 25 hours. One of those days does not have a "2 O-clock" times and the other has two, one with DST true and another with DST false. The other complication that coes with that fact is that (in the US at least) the dates on which those 23 and 25 hour days occur are defined by the whims of governement ("Those who seek to change times and way.." Is that reveleations?) so you can't code for changes ahead of time.
If you get past that challenge, the other thing to take note of is that Windows displays the creation date of files in the current time (DST T/F) so a file created at 1:00 last night may have a creation time of 2:00.
I hope you don't have to deal with DST and if you do, at least you have been warned.
Ben
Quoting from here...
This thing all things devours:
Birds, beasts, trees, flowers;
Gnaws iron, bites steel;
Grinds hard stones to meal;
Slays king, ruins town,
And beats high mountain down.
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

How do I schedule an automator script to run at a certain time every day?

How do I schedule an automator script to run at a certain time every day?
This used to be done through iCalendar and this option is no longer available.
How do I do this?
--Kenoli

Kenoli Oleari1 wrote:
How do I schedule an automator script to run at a certain time every day?
This used to be done through iCalendar and this option is no longer available.
How do I do this?
--Kenoli
You can use lauchd to run the script.
Here's an example of an Automator App that I have scheduled to run at 7am daily:
You would save this as com.yourname.plist and put it the the Folder: ~/Library/LaunchAgents/ (then log out and back in, or reboot)
(To run a workflow, change open to automator)
(A nice GUI launchd editor is Lingon)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
          <key>Label</key>
          <string>com.tonyt.EventReport</string>
          <key>ProgramArguments</key>
          <array>
                    <string>open</string>
                    <string>/Users/Tony/Library/Scripts/Events Report.app</string>
          </array>
          <key>StartCalendarInterval</key>
          <dict>
                    <key>Hour</key>
                    <integer>7</integer>
                    <key>Minute</key>
                    <integer>0</integer>
          </dict>
</dict>
</plist>

When I schedule my computer to sleep at a certain time every day, it goes to sleep at a completely different time.

I've been struggling with this problem for a bit.
I want the computer to sleep every night at 11pm, and wake every day at 9am.
I've set the times in the power saving preferences panel. No problem. However, at 19:42 every day, I'm told that the computer is scheduled to shut down, and do I REALLY want to do that? Of course I don't, so I cancel.
It wakes up pretty reliably at 9am, I'm pretty sure, but of course I have to put it to sleep myself.
I tried unchecking both items and quitting preferences, then coming back in, and the times are set back to 12:00AM. Then I set them to the times I want.
I THINK it might work for a little while after that, but then go back to this odd behaviour of trying to go to sleep at what seems to be an arbitrary time, though it's the SAME arbitrary time every day. :/
Anyone seen this?

Kenoli Oleari1 wrote:
How do I schedule an automator script to run at a certain time every day?
This used to be done through iCalendar and this option is no longer available.
How do I do this?
--Kenoli
You can use lauchd to run the script.
Here's an example of an Automator App that I have scheduled to run at 7am daily:
You would save this as com.yourname.plist and put it the the Folder: ~/Library/LaunchAgents/ (then log out and back in, or reboot)
(To run a workflow, change open to automator)
(A nice GUI launchd editor is Lingon)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
          <key>Label</key>
          <string>com.tonyt.EventReport</string>
          <key>ProgramArguments</key>
          <array>
                    <string>open</string>
                    <string>/Users/Tony/Library/Scripts/Events Report.app</string>
          </array>
          <key>StartCalendarInterval</key>
          <dict>
                    <key>Hour</key>
                    <integer>7</integer>
                    <key>Minute</key>
                    <integer>0</integer>
          </dict>
</dict>
</plist>

MS spiking at certain times of day, World of warcr...

My MS keeps spiking really high during certain times of day lasting for between 30 minutes and 2 hours. It sometimes goes as high as over 3000 which makes gaming literally impossible.
I've done a pathing ping just now at gone 11PM with these results
Computing statistics for 275 seconds...
            Source to Here   This Node/Link
Hop RTT    Lost/Sent = Pct Lost/Sent = Pct Address
0                                           Danny-PC.home [192.168.1.64]
                                0/ 100 = 0%   |
1    0ms     0/ 100 = 0%     0/ 100 = 0% BThomehub.home [192.168.1.254]
                                0/ 100 = 0%   |
2 226ms     1/ 100 = 1%     1/ 100 = 1% 217.41.191.122
                                0/ 100 = 0%   |
3 ---     100/ 100 =100%   100/ 100 =100% 217.47.41.161
                                0/ 100 = 0%   |
4 229ms     4/ 100 = 4%     4/ 100 = 4% 213.1.69.30
                                0/ 100 = 0%   |
5 241ms     2/ 100 = 2%     2/ 100 = 2% 31.55.164.103
                                0/ 100 = 0%   |
6 ---     100/ 100 =100%   100/ 100 =100% 213.120.182.69
                                0/ 100 = 0%   |
7 249ms     1/ 100 = 1%     1/ 100 = 1% 31.55.164.109
                                0/ 100 = 0%   |
8 228ms     2/ 100 = 2%     2/ 100 = 2% 109.159.248.219
                                0/ 100 = 0%   |
9 226ms     1/ 100 = 1%     1/ 100 = 1% core1-te0-15-0-17.ealing.ukcore.bt.net [109.159.248.34]
                                0/ 100 = 0%   |
10 213ms     2/ 100 = 2%     2/ 100 = 2% peer6-te0-9-0-15.telehouse.ukcore.bt.net [109.159.252.59]
                                0/ 100 = 0%   |
11 228ms     0/ 100 = 0%     0/ 100 = 0% 166-49-211-238.eu.bt.net [166.49.211.238]
Trace complete
This result is actually one of a few good ones, others have been much higher.
Why does it do this?

I been having this issue for close to 6 months now
Had engineers out/conntacted BT support ect.Appranrtly nothing is wrong according to them,but gaming online is immposible between 4pm--11pm for me.
Im postive it to do with traffic shaping/routing on the BT network.
Bt is a particilarly bad ISP if your a gamer tbh

My iMac running 10.10.2 keeps crashing several times a day. It does a automatic restart and gives me a option to send in a report. Any ideas what might be causing this?

My iMac does an automatic restart several times a day. It gives me a option to send in a "panic" report. This happens randomly during the day and night. Any idea of anything new that might be causing this? I am up to date on all applications.

Mac users often ask whether they should install "anti-virus" (AV) software. The usual answer is "no." That answer is right, but it may give the wrong impression that there is no threat from what are loosely called "viruses." There is a threat, and you need to educate yourself about it.
1. This is a comment on what you should—and should not—do to protect yourself from malicious software ("malware") that circulates on the Internet and gets onto a computer as an unintended consequence of the user's actions.
It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the computer, or who has been able to take control of it remotely. That threat is in a different category, and there's no easy way to defend against it. AV software is not intended to, and does not, defend against such attacks.
The comment is long because the issue is complex. The key points are in sections 5, 6, and 10.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user. Internally Apple calls it "XProtect."
The malware recognition database used by XProtect is automatically updated; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
☞ It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
☞ It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't been checked for security by Apple unless it comes from the App Store, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
☞ It can easily be disabled or overridden by the user.
☞ A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
☞ An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
Apple has taken far too long to revoke the codesigning certificates of some known abusers, thereby diluting the value of Gatekeeper and the Developer ID program. Those lapses don't involve App Store products, however.
For the reasons given, App Store products, and—to a lesser extent—other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandbox security is based on user input. Never click through any request for authorization without thinking.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. The built-in security features of OS X reduce the risk of malware attack, but they are not, and never will be, complete protection. Malware is a problem of human behavior, not machine behavior, and no technological fix alone is going to solve it. Trusting software to protect you will only make you more vulnerable.
The best defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and Internet criminals. If you're better informed than they think you are, you'll win. That means, in practice, that you always stay within a safe harbor of computing practices. How do you know when you're leaving the safe harbor? Below are some warning signs of danger.
Software from an untrustworthy source
☞ Software with a corporate brand, such as Adobe Flash Player, doesn't come directly from the developer’s website. Do not trust an alert from any website to update Flash, or your browser, or any other software. A genuine alert that Flash is outdated and blocked is shown on this support page. Follow the instructions on the support page in that case. Otherwise, assume that the alert is fake and someone is trying to scam you into installing malware. If you see such alerts on more than one website, ask for instructions.
☞ Software of any kind is distributed via BitTorrent, or Usenet, or on a website that also distributes pirated music or movies.
☞ Rogue websites such as Softonic, Soft32, and CNET Download distribute free applications that have been packaged in a superfluous "installer."
☞ The software is advertised by means of spam or intrusive web ads. Any ad, on any site, that includes a direct link to a download should be ignored.
Software that is plainly illegal or does something illegal
☞ High-priced commercial software such as Photoshop is "cracked" or "free."
☞ An application helps you to infringe copyright, for instance by circumventing the copy protection on commercial software, or saving streamed media for reuse without permission. All "YouTube downloaders" are in this category, though not all are necessarily malicious.
Conditional or unsolicited offers from strangers
☞ A telephone caller or a web page tells you that you have a “virus” and offers to help you remove it. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
☞ A web site offers free content such as video or music, but to use it you must install a “codec,” “plug-in,” "player," "downloader," "extractor," or “certificate” that comes from that same site, or an unknown one.
☞ You win a prize in a contest you never entered.
☞ Someone on a message board such as this one is eager to help you, but only if you download an application of his choosing.
☞ A "FREE WI-FI !!!" network advertises itself in a public place such as an airport, but is not provided by the management.
☞ Anything online that you would expect to pay for is "free."
Unexpected events
☞ A file is downloaded automatically when you visit a web page, with no other action on your part. Delete any such file without opening it.
☞ You open what you think is a document and get an alert that it's "an application downloaded from the Internet." Click Cancel and delete the file. Even if you don't get the alert, you should still delete any file that isn't what you expected it to be.
☞ An application does something you don't expect, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
☞ Software is attached to email that you didn't request, even if it comes (or seems to come) from someone you trust.
I don't say that leaving the safe harbor just once will necessarily result in disaster, but making a habit of it will weaken your defenses against malware attack. Any of the above scenarios should, at the very least, make you uncomfortable.
6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it—not JavaScript—in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a padlock icon in the address bar when visiting a secure site.
Stay within the safe harbor, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
7. Never install any commercial AV or "Internet security" products for the Mac, as they are all worse than useless. If you need to be able to detect Windows malware in your files, use one of the free security apps in the Mac App Store—nothing else.
Why shouldn't you use commercial AV products?
☞ To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. This technique is a proven failure, as a major AV software vendor has admitted. Most attacks are "zero-day"—that is, previously unknown. Recognition-based AV does not defend against such attacks, and the enterprise IT industry is coming to the realization that traditional AV software is worthless.
☞ Its design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere. In order to meet that nonexistent threat, commercial AV software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
☞ By modifying the operating system, the software may also create weaknesses that could be exploited by malware attackers.
☞ Most importantly, a false sense of security is dangerous.
8. An AV product from the App Store, such as "ClamXav," has the same drawback as the commercial suites of being always out of date, but it does not inject low-level code into the operating system. That doesn't mean it's entirely harmless. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
An AV app is not needed, and cannot be relied upon, for protection against OS X malware. It's useful, if at all, only for detecting Windows malware, and even for that use it's not really effective, because new Windows malware is emerging much faster than OS X malware.
Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else. A malicious attachment in email is usually easy to recognize by the name alone. An actual example:
London Terror Moovie.avi [124 spaces] Checked By Norton Antivirus.exe
You don't need software to tell you that's a Windows trojan. Software may be able to tell you which trojan it is, but who cares? In practice, there's no reason to use recognition software unless an organizational policy requires it. Windows malware is so widespread that you should assume it's in every email attachment until proven otherwise. Nevertheless, ClamXav or a similar product from the App Store may serve a purpose if it satisfies an ill-informed network administrator who says you must run some kind of AV application. It's free and it won't handicap the system.
The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have all the disadvantages mentioned in section 7.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
10. As a Mac user, you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither can you assume that you will always be safe from exploitation, no matter what you do. Navigating the Internet is like walking the streets of a big city. It can be as safe or as dangerous as you choose to make it. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices.

Update Podcasts at a certain time of day

My ISP limits bandwidth during certain times of the day, and if I exceed a quota during the restricted hours, my connection speed is lowered. Is there a way to set iTunes to check for podcast updates / purchases at a user specified time of day?

I'm looking for the solution to this issue too. Once or twice, a full system restart has seemed to solve the problem temporarily but it slips back to an afternoon refresh after a few days.
Seems like it would be simple for Apple to allow us to specify a time of day for refreshes in the preferences section.

Stoping a looping animation code at certain time

I am using a code which creates a twinkling star effect. I need to make the effect stop at either 30seconds of itplaying or if possible on a certain frame.
Here is the code I am using:
onClipEvent (enterFrame) {
getTargetAlpha = function(){
          return Math.random() * 100;
this.speed = 9;
this.target = this.getTargetAlpha();
this.onEnterFrame = function(){
          if(this._alpha < this.target){
                    this._alpha += this.speed;
          }else if(this._alpha > this.target){
                    this._alpha -= this.speed;
          }else if(this._alpha == this.target){
                    this.target = this.getTargetAlpha;
Is it possible to apply something to achieve this?

You should get any code "on..." objects off of them and keep it all in the timelline.
You can use the setTimeout() function to take care of timing out at 30 seconds and cancelling whatever other code you have processing. Look it up in the help documentation or search Google for how to use it.

Blackberry Messenger only works at certain times of day.

a few days ago my phone crashed, leaving my blackberry messanger not working, a few hours later it started up and everything was fine, however the next day my bbm only worked early in the morning and then started up again around 4, and its did it again this morning, i have restarted it many times, i have deleted it then reinstalled it, its just very annoying it doesnt work, and im not really sure what to do with it
any help would be much appreciated

Ella, that's got to be some intermittent connect with your mobile provider.
The next time your BBMessenger is NOT working, check On your Manage Connections screen, click on the Services Status. What is the status of the BlackBerry Internet Service at that time?
ALSO: You have your mobile phone number listed as your "My Mobile Provider" or carrier. Putting your phone number out on the internet on these public forums for the world to see, is not wise. To change that, at the top of this page click on My Settings > Personal Profile > Personal Information, and in the entry block for "Carrier" type the name of your mobile provider.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can you search/filter mail messages to show only messages sent at a certain time of day [e.g. AM or PM]?

Is it possible to search for message sent only during certain hours of the day?
At a minimum, the ability to see either AM or PM messages, and even better if you could limit search results to a range of hours of the day [e.g. messages sent between 8 PM and 11 PM].
I have not been able to find this documented online anywhere. Thank you!

Is it possible to search for message sent only during certain hours of the day?
At a minimum, the ability to see either AM or PM messages, and even better if you could limit search results to a range of hours of the day [e.g. messages sent between 8 PM and 11 PM].
I have not been able to find this documented online anywhere. Thank you!

Slowed dsl at certain times of day and weekends

For the past two months I've noticed that my speeds drop to 1Mb (normally I get 6.5 or better) from around 4:30pm to about midnight weekdays and all day on the weekends. Verizon tech support has been out twice and coming back again on monday but they cannot send someone at the time the problem is occuring so they never see an issue. I just read that this problem could be the result of overload on the Edge router. I'd like to request to be moved to a new edge router. I work from home and refuse to continue to pay for DSL speeds I'm not getting. Despite the added expense, I may be forced to switch to comcast.
Solved!
Go to Solution.

Try the Verizon Direct forum over at DSLReports. Let them know of the situation and they should be able to move you onto another edge router or some less congested equipment.
========
The first to bring me 1Gbps Fiber for $30/m wins!

I want Firefox to redirect to a website at certain times every day. 8:10, 9:53, . . . how do I do that?

The times are 8:10, 8:58, 9:46, 10:34, 11:22, 12:37, 1:06, 1:54, 2:42. Is this possible?

In scheduler you can setup a jobb starting ff at a spec time and repeating it (in steps) from 5min - 1 hour but not 48 min. (30 or 60min)
With a batch (command) file you can use "sleep" (48*60*60 sec) You can write a script that checks the time and comp it to your schedule. To start FF on a specific page (or open a new page from a commandline you use "C:\Program Files (x86)\Mozilla Firefox"\firefox -new-window http://www.dn.se
or whatever site you want to open.

Disable WiFi & Bluetooth during certain times of day

I recently upgraded from a Droid RAZR 2012 to a Samsung S5. One feature I had with the RAZR that I haven't figured out how to duplicate with my S5 was something called "Smart Actions". With this feature, I was able to set times of the day where my WiFi and Bluetooth would turn off since I don't need them during most days. Is there some way to do the same with my S5?

Search for TecTiles 2. You can program the tiles, and put one on the dash of your car, like a sticker, to toggle those radios off when you tap them via the nfc in your phone. The app is in Galaxy Essentials, or the Play Store, but you'll have to order the NFC tiles from amazon or something.
http://www.amazon.com/TecTiles-5-Pack-Programmable-Communication-Samsung/dp/B00DKXXLNC/ref=sr_1_1?ie=UTF8&qid=1429724141&sr=8-1&keywords=tectiles+2

FDM Script - Set to run at a specific time of day??

Can you set an FDM script to run at a certain time of day (based on
server time)? I've currently got a Custom/General script I'd like to
run once a day at a set time.
Thanks!

You need the use task manager for that.
I suggest you look in the admin guide for more info.
If I’m not mistaken, you need to enable in the application setting and then you can use it from the tools menu in the Workbench.

Single depreciation run for multiple company codes

Hi experts,
How can I carry out a depreciation run for multiple company codes in one transaction? I thought about creating a variant and running a batch job but you can only select the run for one company code at a time. Am I missing something here. Kindly provide explanation of how this can be done.
Thanks.
Ben

Use the program RAPOST2010. There is no transaction for this program, but you can create your own if necessary, for example ZAFAB.
Please not that there is a separate forum for asset accounting.

Post Moved Spotify-buffering-at-certain-times-of-...

Post Moved to Infinity Board http://community.bt.com/t5/BT-Infinity/Spotify-buffering-at-certain-times-of-day-with-BT-Infinity/td...
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

I've been using Spotify for months and I'm premium. I don't have this issue though I do have the music synced so I can listen to it offline.
You could try running this, http://netalyzr.icsi.berkeley.edu/
If this helped you please click the Star beside my name.
If this answered your question please click "Mark as Accepted Solution" below.

Run a section of code a certain time of day

Similar Messages

Maybe you are looking for