Run after start problem

i made the preference that my vi runs when i start up the vi. the window appearance is a dialog...
when i start up the vi it hangs and i couldn't return to the diagramm because i've got no menus.
how can i return to the other appearance or how can i get the labview menus back

Hi,
to open such a vi in edit mode you have to do the following things:
1. Create a new Untitled.vi and go to its diagram.
2. Place your problematic VI on this diagram as a subVI.
3. Double-click on it and it will be opened in edit mode.
Good luck.
Oleg Chutko.

Similar Messages

LiveUpdate 6-not running after last update

application not running after start win7x64, but I did not set anything and not even start
pls. test application
main PC:
moth. H97
CPU: Corei-5
VGA: GTX 560Ti
thx

Hi,
I am pretty sure you want to know what forum's experienced users think about Live Update, don't you?
Live Update is terrible, and in most cases it's better to remove it and forget about it. It's alright to keep it installed and run to check for updates but a lot better and safer to install them manually (yourself) from MSI's product page. And forget about updating BIOS. It's as good as smashing the BIOS chip with the hammer MFlash or Forum's tool is much safer and more efficient.
What updates did it do? What drivers/utilities do you have installed from the CD/MSI's page?

I keep getting a message after start up saying "Completer wants to make changes. Type your password to allow this (which I have not done). Have screen shots. What do I do? Read this is malware. Running Yosemite OS X 10.10.1

Have mac book pro, OS X Yosemite 10.10.1. I get this after start up: "Completer wants to make changes. Type your password to allow this" (which I have not entered. When I cancel, there is some unknown "installer" icon on my desktop. If I move it to the trash, this all just starts over on the next time it is restarted. Have screenshots, but for some reason I can not attach to this message right now. Heard this is malware...HELP!

There is no need to download anything to solve this problem.
If Safari crashes on launch and you don't have another web browser, you should be able to launch Safari by starting up in safe mode.
You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those.
After removing the malware, remember to reset your home page in all the web browsers affected, if it was changed.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

Firefox 29.0.1 leaves process running after exit, which must be terminated manually before Firefox will re-start.

After updating to Firefox 29.0, firefox.exe *32 process keeps running after application exit, and must be terminated manually before Firefox will re-start. The update to 29.0.1 did not solve the issue. All updates prior to 29.0 never exhibited this problem, and there have been no other changes to my system, so this issue originated with 29.0.

Thanks for the response, and you are right, for now the only one being helped by leaving telemetry on is me, because there is (apparently) no problem to report when it is on.
Slight clarification:
1. Enabling history and cache fixes problem.
2. Enabling telemetry fixes problem.
3. Enabling history and cache, cycling FireFox on/off, then disabling history and cache, fixes problem during current power cycle, but not persistently between power cycles.
4. All the above settings do persist across power cycles.

Photoshop Elements 13 running in Windows 8.1 hangs immediately after starting

Photoshop Elements 13 running in Windows 8.1 hangs immediately after starting. Has to be shut down by Task Manger. Task Manger shows that it is still using some CPU. Ran Procmon (part of Sysinternals) which shows that it is in a loop. Stack trace shows it is executing code in AMTValidateProductLicense.dll. Started happening about a month after I installed PSE. Everything used to work fine at first. Have tried going back to an old image of Win 8.1 on a different hard drive, otherwise same computer, and installed PSE 13 from DVD. That installation never worked, it aways hangs. If I do a clean boot, it sometimes runs long enough for me to click on a menu item and then hangs the same way. And, yes I bought a new DVD to run on this computer, never been used in any other way. Any ideas how I can get PSE running properly?

It really doesn't look like a licensing issue, it seems to be code in the area of license validation that isn't working.
I took your suggestion and initiated a couple of chat sessions with support, but so far still no luck. The latest session with Neeraj seemed to be promising. After some investigation he asked to reinstall. First he uninstalled with Revo Uninstall, which seemed to be pretty thorough. That required a restart, so he set things up to restore his conference session and took my phone number. Unfortunately I guess his connection didn't come back. When I didn't hear from him after a couple of hours I tried installing Photoshop and Premiere myself. As before, Premiere works and Photoshop doesn't. When I start Photoshop, the window opens and for a couple of seconds menus open when I click on them. Then the window freezes and I have to use Task Manager to kill it. So basically, I've tried several things but I'm back where I've been all along, I can't get Photoshop to work. I'd really appreciate suggestions about something else to try.
I wish someone at Adobe was interested in the Process Monitor traces I've made, because I'm sure someone who knows the code would be able to figure out pretty quickly what's happening. Is it trying to read a file that's not there, failing to write a file, failing to make an internet connection or what? It really shouldn't be this hard to figure out.

Shortly after starting up, a dark 'film' slowly comes down over the screen and I get a message saying I have to shut down the computer. I've tried to start from the disk, and before I can even run a repair off utilities, it happens again. What's up?

When I started my iMac today, it started beeping like an alarm horn. I shut it down, and held the startup button a little longer to get it to start. Shortly after starting up, a dark 'film' slowly comes down over the screen and I get a message saying I have to shut down the computer. I've tried to start from the disk, and before I can even run a repair off utilities, it happens again. What's up? Am I screwed? HELP!!

What you are seeing is a kernel panic, often but not always connected with a hardware or peripheral issue, so, unplug everything except mouse and keyboard, reboot and hold the shift key as soon as your hear the chime, continue holding it until you see the Apple Icon and spinning progress indicator, then post back.
It will take noticeably longer than normal to start.

Start process from JSP which continues running after response is completed

Is it possible to start a process from within JSP which can continue running after the HTTP response is complete, so the response doesn't time out??

Your question is a little vague. If I am understanding your question correctly, it sounds like you are starting a process in JSP that takes a long time, and the browser is timing out. If this is your question, then here is my response:
We've had this situation before. Often times it occurs because the JSP page launches a long database operation that could take an hour. You have a few choices, but one good approach is this (any variation of this works too):
1. When the page loads and you need the process to start, create a new thread and have the long operation run from this thread. You can put the thread object into a session variable and store it for later use.
2. Have the JSP code output a META-REFRESH tag on the page so that the page refreshes every 30 seconds or so.
3. On each refresh, you get the thread object from the session context and check it to see if it is done or still running. If it is, then just output another META-REFRESH and the page will keep refreshing itself. If it is done, you can, of course, output a "finished" message to the user.
You can also have a stop button on the page that you can use to send a message to the thread to stop.
Hope that gives you some ideas!
Michael

I can't get Firefox to start. It says that Firefox is already running after re-install and re-start it again. I have deleted all profiles, but no luck. HELP!

I can't get Firefox to start. It says that Firefox is already running after re-install and re-start it again. I have deleted all profiles, but no luck. HELP! edit

-> [[Firefox is already running but is not responding]]
-> Profile in use
* http://kb.mozillazine.org/Profile_in_use
Check and tell if its working.

Anyone have problems getting Office 2004 to run after Lion upgrade?

Anyone have problems getting Office 2004 to run after Lion upgrade?

For the rare few, such as myself, who have some Office 2004 or older documents that fail to translate well in Office 2011, another option is to run Office 2004 in Snow Leopard (with Rosetta) installed in Parallels:
[click on image to enlarge]
Full Snow Leopard installation instructions are here:
http://forums.macrumors.com/showthread.php?t=1365439

Num lock problems after start

I have just startet my HP Pavilion 500-106eo today with windows 8.1. The problem is, that num lock is off after start and restart, and bios is set correctly to on and value in H-key is 2 ( num lock on after start) I have tried to shut down fast start up and it didn't work either. I can manually set num lock on after start....Help me solve this issue, please.
This question was solved.
View Solution.

Eskil4930, welcome to the forum.
The reason that you can't change "fast startup" is because you have to click on the phrase at the top of the page "Change settings that are currently unavailable". Once you click on it the settings that you weren't able to change will become available. Uncheck "Turn on fast startup (recommended) and close the Control Panel and restart the computer.
Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Finder will not run after re-start

Finder will not run after a re-start. Any quick fixes?

scottg
Please review the following for possible solutions to your Premiere Elements 12 issue.
http://www.atr935.blogspot.com/2014/04/pe12-sign-in-failure-connect-to.html
http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
Looking forward to learning of your results when your schedule permits.
Thank you.
ATR

After updating itunes three (3) days ago - itunes close shortly after starting with the message "a problem occured and cannot be solved, please close application"

After updating itunes three (3) days ago - itunes close shortly after starting with the message "a problem occured and cannot be solved, please close application" - Platform: WIN7 - iTunes 11.2.9.115

Start with the third box in Troubleshooting issues with iTunes for Windows updates.
If that doesn't work, use the steps in the second box to repair your iTunes installation. Your library should be unaffected by these steps but there is backup advice elsewhere in the user tip.
tt2

Adobe Premiere (CS6) crashes after start up - what could the problem be?

I open up a project I have been working on for about a year now. It does have a fair amount of footage within it, but I recently cleared out some unused (draft) sequences and some back up files/images.
Shortly after start up it crashes and displays this message:
I am on a bit of a deadline and am not sure what to do.
The other night it stopped crashing for the evening and I could use it fine. But today it is crashing again...
Appreciate any help in resolving this!
Melodie

Welcome to the forum!
My assumption is that you've meant to say WXGA which would reflect 1280x800...BTW, what's the 7-character code of your ThinkPad?
Lowering the brightness would be the first step IMO. The only LCDs that have never given me headaches were FlexViews, but Lenovo phased them out... There are also settings in Vista that should be able to help you make the colours less offensive for your eyesight...
Good luck and let us know.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

My computer keeps saying firefox is still running after I have closed it and then I have to restart my computer to use the internet again. What's the problem? Also, I cannot print my emails.

Why do I need to restart my computer every time I've closed the internet and try to reopen firefox?

Yep tried that and it would not stop. I tried running portable Firefox and couldn't, no surprise as it is already running. I had to reboot my PC. You may think that acceptable. When it takes 15 minutes and you don't normally turn off your machine as it needed on then it's a bigger deal.
I ran the portable version again as V5 is crap, basically and there is nowhere to find version 4!!! Thanks for that Mozilla.
It tells me that Firefox is running. I did manage to kill that version at least but why or how is FireFox running after a reboot and using 62 Mb when doing nothing to boot.
Firefox 5 is really slow at remembering URL's when typed in the whole app slows right down and it take 10-15 sec to come up with the same as V4 did straight away. I have to admit my PC in the office does not behave this way with version 5 but this is the real world.

After start skype, the ipad2 become white screen, other application runs well, how to solve it?

After start skype in Pad2, the screen become white, it can use. However, other applications in iPad2 are OK? How do I solve this issue?

After start skype in Pad2, the screen become white, it can use. However, other applications in iPad2 are OK? How do I solve this issue?

Run after start problem

Similar Messages

Maybe you are looking for