Run applet on a PDA

I have a webpage with an applet. It works fine on my laptop. The webpage with buttons and a textarea and the applet it working fine. But on my PDA I can only see the buttons and textarea. There is no field where the applet should be displayed.
If an applet doesn't work at the laptop, I can see a field where the applet should be displayed with a red cross. But this field is not on my pda screen.
So I went to other sites with applet's and at these websites I had the same problems.
I am running CrEme 3.25 on my PDA with Windows Mobile 3.0. CrEme 3.25 you can compare with[b] JVM 1.1.8 someone told me.
Is it possible to run applets on a PDA. Which java version do I need and where can I download the java version for pda which supports applets.

While native Applets running within PocketIE is not supported, you can run an appletviewer with the Personal Profile PocketPC implementation found at:
http://www-306.ibm.com/software/wireless/wsdd/
WSDD 5.6.1 was just released. It does support many configurations/profiles on PocketPC.
/Ken

Similar Messages

I have updated my iTunes to the newest version, 10-25 on a windows XP system. Now my java virtual machine is not working and I need it to run applet window. My Java is also newest version. What can I do to fix/repair my issue?

I need help with java on windowsXP after updating iTunes to the latest version. My java will not work and I get error message need java virtual machine to run applet window. Did not have this problem prior to the iTunes update.
Please help, Thanks

If your library was working on your computer and then popped up empty all of a sudden then this might be what you need...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Dont want to display "Report Successfully Run" applet

Dear Users....I Dont want to display "Report Successfully Run" applet after my report runs successfully. I'm calling report from Forms-10g Rel.2 and my browser is Internet Explorer ver.6. I'm sending my report directly to printer using Web.Show_Document.If my report is sent to printer successfully there is no need to display browser window with the above mentioned message. Is there any solution for this???

Code in when-button-pressed
DECLARE
V_Usr_Prm Varchar2 (1000);
BEGIN
V_Usr_Prm :=
'FROM_REF_NO='
|| P_FRM_REF_NO
|| '+TO_REF_NO='
|| P_FRM_REF_NO
|| '+P_PRE_BY='
|| P_PRE_BYE
|| '+P_VR_TYPE='
|| P_VOR_TYP
|| '+YEAR1='
|| P_VOR_YER
|| '+MNU_IDE=0'
|| '+P_PRN_FLG=1';
web_show_document_proc ('HTMLCSS', 'Y:\02\\02\VOR_PRN.REP', V_USR_PRM);
END;
Procedure Web_Show_Document_Proc is
PROCEDURE WEB_SHOW_DOCUMENT_PROC (runformat varchar2,
reportname varchar2,
userparameters vARCHAR2)
IS
i NUMBER (10);
v_a VARCHAR2 (10);
v_b VARCHAR2 (10);
vc_url VARCHAR2 (1000);
vc_url_temp VARCHAR2 (1000);
vc_user_name VARCHAR2 (30) := GET_APPLICATION_PROPERTY (username);
vc_user_pw VARCHAR2 (30) := GET_APPLICATION_PROPERTY (password);
vc_user_connect VARCHAR2 (30)
:= GET_APPLICATION_PROPERTY (connect_string) ;
BEGIN
vc_url :=
'userid='
|| vc_user_name
|| '/'
|| vc_user_pw
|| '@'
|| vc_user_connect;
FOR i IN 1 .. LENGTH (vc_url)
LOOP
v_a := LTRIM (TO_CHAR (TRUNC (ASCII (SUBSTR (vc_url, i, 1)) / 16)));
IF v_a = '10'
THEN
v_a := 'A';
ELSIF v_a = '11'
THEN
v_a := 'B';
ELSIF v_a = '12'
THEN
v_a := 'C';
ELSIF v_a = '13'
THEN
v_a := 'D';
ELSIF v_a = '14'
THEN
v_a := 'E';
ELSIF v_a = '15'
THEN
v_a := 'F';
END IF;
v_b := LTRIM (TO_CHAR (MOD (ASCII (SUBSTR (vc_url, i, 1)), 16)));
IF v_b = '10'
THEN
v_b := 'A';
ELSIF v_b = '11'
THEN
v_b := 'B';
ELSIF v_b = '12'
THEN
v_b := 'C';
ELSIF v_b = '13'
THEN
v_b := 'D';
ELSIF v_b = '14'
THEN
v_b := 'E';
ELSIF v_b = '15'
THEN
v_b := 'F';
END IF;
vc_url_temp := vc_url_temp || '%' || v_a || v_b;
END LOOP;
vc_url :=
'/reports/rwservlet?server=rep_appsrv_frhome1+'
|| vc_url_temp
|| '+report='
|| reportname
|| '+destype=Printer+desformat='
|| runformat
|| '+paramform=No+'
|| userparameters;
WEB.SHOW_DOCUMENT (vc_url, '_blank');
END;

How to run Applet programe in IE

I' am beginner in java & i want to run applet in IE.But when i tried to do it in IE,"page can not displayed" error is shown.
why this is so?
which steps to follow?

which JVM is used by IE? The 1.1.8JVM from IE is very old so you should use a Java2 JVM or a Swing-Plugin for IE

HOw to run Applet in browser.

Hi guys. I've got 2 problems.
1. In Window, I've got Java installed (and using NetBean IDE as Java editor), so of course I've got j2sdk_nb-1.4.2 installed as well. But I couldn't run any applet in IE, for example, in games.yahoo.com, I couldn't join any game because applet always failed to load. But yesterday, I've got a pop up asking to install jre1.4.2 and after install this JRE, everything works fine. My point here is, when I have SDK1.4.2 which contains JRE, why should I have to install new JRE to run applets ?
2. Could anyone tell me how to run applet in Mozilla, Linux. I'm using Linux RedHat 9 as well. And in Redhat, I've got J2sdk_nb-1.4.2 installed with NetBeans IDE. It said that I need appropriate Plugs-in, but in my Java directory, I also found Plugsin directory. So how to configure Mozilla to run applet.
Thanks for reading.

Just to let you guys know that I sorted it out already. Well, the problem lies in I'm confused between two directory /usr/lib/Mozilla and /usr/lib/Mozilla and two Java plugs-in available in nsc60 and nsc60-gcc (don't remember exactly)
For my Linux (Red Hat 9), I've got to create symbol link from nsc60 directory to /usr/lib/Mozilla, not any other way.
Thanks

Is it possible to run applet without JRE

hello friends,
Presently I hava developed chating application. Now I want to download my applet on client side and run ther wether client's computer has JRE or not.
so is it possible to run applet on computer which doesnt have JRE?
Thanks in advance

Not unless you create an executable file and jam the whole JRE into it.

Run applets without JRE

Hello to all developers,
I know that to run applets in IE we should have the JRE installed on our machines. But is there any way that we can run applets without the JRE being installed on our machines. I have also heard of something called as the Microsoft JVM. How can we use it to run the java applets.
Thanking in advance.

The Microsoft JVM is extremely outdated and not recommended at all. You can't really run a Java applet without a JVM, and I'm not sure if any but the one Sun makes comes with a browser plugin.

UNABLE TO RUN APPLETS ON A BROWSER

I am unable to run applets on a browser which run well on an appletviewer.
I kept the class file in the same directory as the web page,but it's only showing the applet window, and not showing it's contents.
console shows...
java.lang.NoClassDefFoundError: NewApplet (wrong name: applet/NewApplet)
     at java.lang.ClassLoader.defineClass1(Native Method)
     at java.lang.ClassLoader.defineClass(Unknown Source)
     at java.security.SecureClassLoader.defineClass(Unknown Source)
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
java.lang.NoClassDefFoundError: NewApplet (wrong name: applet/NewApplet)
     at java.lang.ClassLoader.defineClass1(Native Method)
     at java.lang.ClassLoader.defineClass(Unknown Source)
     at java.security.SecureClassLoader.defineClass(Unknown Source)
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
as i am a newbee can anybody plz help..........

what browser r u using? if ever is the java plug-in in your browser is set.

How do I enable capability to run applets?

I was trying to access and online course from a site I had success with a few weeks ago (February, 2014). Today, March 3, 2014, I was unable to load the course from the course menu.
I used the site system requirements check and all was well except capability to run applets.
I am running OSX version 10.6.8, Safari 5.1.10, Java SE 6 version 1.6.0_65-b14-462.
How do I enable capability to run applets?
I read related support community items but they did not help.

hello, lower the security level within the java settings in the system control panel: http://www.java.com/en/download/help/jcp_security.xml

Error running Applet

I am getting an error
Can't find resource for bundles sun.applet.resources.MsgAppletViewer,
key appletpanel.badattribute.exception
while running applet.
How can I solve it?

Some thing is amok here.
Your AppModule is beginning to be created.
Some property values are being determined -
I think your property file is missing -
property values are defaulted. (0/null/...)
Your applet seems to be crashing with the
null property values recieved.
I think you are missing one of your deployment files.
Are you sure you can 'Test' the application module in it's own project (Right click on <Name>Module in your project and select Test.
I hope this helps,
-John
null

Can I set JVM memory size when running applets?

Hi,
I have downloaded an applet that renders panoramic images and
I have a problem with Java memory. I remember that default maximum
size that applet can use is 70MB, and the problem is 70MB is
not enough when rendering big images. It is OK when I add
"-Xmx -Xms" parameters in the Java Control but I cannot tell
everyone who wants to see my images to go control panel, add
parameters etc..
So my question is...
Is it possible add "-Xmx -Xms" parameters inside the applet file
so that these parameters run automatically when executing applet?
Thanks in advance for your reply!
Hyung

Hi,
I have downloaded an applet that renders panoramic
images and
I have a problem with Java memory. I remember that
default maximum
size that applet can use is 70MB, and the problem is
70MB is
not enough when rendering big images. It is OK when I
add
"-Xmx -Xms" parameters in the Java Control but I
cannot tell
everyone who wants to see my images to go control
panel, add
parameters etc..
So my question is...
Is it possible add "-Xmx -Xms" parameters inside the
applet file
so that these parameters run automatically when
executing applet?
Thanks in advance for your reply!
HyungA potential workaround I would try is is use ByteBuffers
(T)

How do I run applets in general?

Do we need environment variables/classpath? If so, I'm not exactly sure what those are. All I know is how to mechanically set up the classpath directory in Windows XP. To make matters worse, I use Linux at home so I don't even know how to do that at all in the first place on my home machines. If I recall correctly, textpad and eclipse both run my applets but I don't know how to do it with netbeans or the command line.
What I tried to do was to make an web.html file that has <APPLET CODE="TheClass.class"</APPLET> then I went to the directory with a terminal and did appletviewer web.html and it popped up my applet but it said start: applet was not initialized.
I'm at school now so I'm on a Windows XP computer as I type this and I tried to do it here and I got this error message:
E:\TempNetbeansProject\TempNetbeansProject\src>appletviewer inClass1.html
Warning: Can't read AppletViewer properties file: C:\Documents and Settings\LAB2
\.hotjava\properties Using defaults.
load: class AppletPassParam.class not found.
java.lang.ClassNotFoundException: AppletPassParam.class
        at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:210)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
        at sun.applet.AppletClassLoader.loadClass(AppletClassLoader.java:143)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
        at sun.applet.AppletClassLoader.loadCode(AppletClassLoader.java:690)
        at sun.applet.AppletPanel.createApplet(AppletPanel.java:785)
        at sun.applet.AppletPanel.runLoader(AppletPanel.java:714)
        at sun.applet.AppletPanel.run(AppletPanel.java:368)
        at java.lang.Thread.run(Thread.java:619)It would be GREATLY appreciated if someone could help me out with the basics!
Thanks in advance!

<APPLET CODE="TheClass.class"</APPLET>Is not valid HTML. It is not even well formed HTML. It should be more along the lines of..
<APPLET CODE="TheClass.class"></APPLET>As already mentioned the class attribute does not need a suffix so..
<APPLET CODE="TheClass"></APPLET>But that element is missing a width or height..
<APPLET CODE="TheClass"
width="600"
height="400">
</APPLET>----------------
Two notes:
- As far as input documents for Java based apps. - GI/GO. Do not expect correct output with invalid or malformed inputs.
- Applets are an advanced area of programming. They are best avoided by newbies.

ClassNotFound error while running applet from Web application

hi everyone,
I have a web application deployed in Tomcat web server. I have HTML file at the level of WEB-INF. And all class files under WEB-INF/classes. But while ruuning the application it giving following error.
load: class com.app.AppletTest not found.
java.lang.ClassNotFoundException: com.app.AppletTest
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
Here the HTML file applettest.html
<html>
     <head>
          <title>Multiple Image Upload</title>
     </head>
     <body>
          <applet code="com.app.AppletTest" width="300" height="300">
          </applet>
     </body>
</html>
And Java applet file is
package com.app;
import java.applet.Applet;
import java.awt.Color;
import java.awt.Graphics;
public class AppletTest extends Applet
     public void init()
          System.out.println("Init called");
          this.setBackground(new Color(180,200,250));
     public void start()
          System.out.println("Start called");
     public void paint(Graphics g)
          g.drawString("welcome Hello World",50,50);
          System.out.println("Paint called");
     public void stop()
          System.out.println("Stop called");
     public void destroy()
          System.out.println("Destroy called");
Thanks.

Hi,
if u put ur com.app.AppletTest file @ WEB-INF Directry, then this problem will solve easily.
you have to put applet package(com.app.AppletTest) @ WEB-INF Directry. Since
Applet is using by html, u have to keep applet with html file.
if applet class have interaction with other classes, u have to seperate all related class to applet to seperate package and put them @ WEB-INF folder.

Problem with running Applets in JDEV 10G Preview

Our Jdeveloper project has a default run target which is an Applet HTML page.
Sometimes when a you click Run/Debug the project runs in Applet Viewer and sometimes it spawns an OC4J process and runs it in the container. It seems the execution of our project has a mind of its own. You can run/debug the same project on different developer PCs and have different execution behavior.
How do you configure the execution environment for applets?
If possible, it would be nice to be able to create multiple execution profiles so that we could have this applet run in OC4J sometimes and in AppletViewer other times. But it does not seem like you have control of this under the project properties.
Thanks,
Paul Manning

Hi Paul,
In the 10g preview, the code that launches applet viewer has first crack at whether it should "run" your html file. If that code thinks it should not launch applet viewer, then the code that launches OC4J gets a chance. The applet viewer launcher looks at the contents of the html file and looks for the <applet> tag. Is it possible that the contents of your html file is changing in such a way that my applet viewer launcher code isn't able to find the <applet> tag? If so, can you possibly send me your html file, or describe the applet tag(s), so that I can improve my side? I'd really appreciate it.
In the near term future (the 10g release), when the run target can be started in different ways (like your applet html), the user will get to choose which way when he/she clicks run/debug. If you use the context menu, the run and debug items will lead to a pull-right submenu that lists all the choices. However, if my applet viewer launcher code doesn't find the applet tag in your html file, you won't see applet viewer in the list of choices.
In the long term future we will support real multiple execution profiles.
-Liz Looney

Not able to run Applet after calling JSP with a Servlet

Dear Java-Community :)
At first I want to say, that my English isn't the best.. so I hope you'll understand my problem ;)
I'm running a J2EE-Application, packed in a EAR-File, on my JBoss with following directory-structur:
/jaw6c/bin
/jaw6c/build
/jaw6c/common
/jaw6c/ejb
/jaw6c/sql
/jaw6c/src
/jaw6c/webapp
/jaw6c/webapp/build
/jaw6c/webapp/build/classes
/jaw6c/webapp/build/classes/com
/jaw6c/webapp/build/classes/com/jbossatwork
/jaw6c/webapp/build/classes/com/jbossatwork/ControllerServlet.class<<<<<<<<
/jaw6c/webapp/build/distribution
/jaw6c/webapp/build/distribution/webapp.war
/jaw6c/webapp/build/gensrc
/jaw6c/webapp/compile-lib
/jaw6c/webapp/lib
/jaw6c/webapp/src
/jaw6c/webapp/src/com
/jaw6c/webapp/src/com/jbossatwork
/jaw6c/webapp/src/com/jbossatwork/ControllerServlet.java
/jaw6c/webapp/web
/jaw6c/webapp/web/WEB-INF
/jaw6c/webapp/web/WEB-INF/classes
/jaw6c/webapp/web/buyCarForm.jsp
/jaw6c/webapp/web/carForm.jsp
/jaw6c/webapp/web/carList.jsp
/jaw6c/webapp/web/copy_darstellungErgebnisse.jsp
/jaw6c/webapp/web/darstellungErgebnisse.jsp<<<<<<<<<<<<<<
/jaw6c/webapp/web/default.css
/jaw6c/webapp/web/diag.jar
/jaw6c/webapp/web/diagram.class<<<<<<<<<<<<<<<<<<<<<<<<
/jaw6c/webapp/web/error.jsp
/jaw6c/webapp/web/index.jsp
/jaw6c/webapp/web/selectBewertungslaeufeList.jsp
/jaw6c/webapp/build.xml
/jaw6c/build.xmlThe applet should be loaded in my "darstellungErgebnisse.jsp"-File.
Now the strange situation:
When I access "darstellungErgebnisse.jsp" DIRECTLY by entering a URL like "localhost:8080/jaw/darstellungErgebnisse.jsp" , the applet is loading perfectly !
But when my server is forwarding me to the JSP-Site with
RequestDispatcher dispatcher = getServletContext().getRequestDispatcher(destinationPage);
dispatcher.forward(request, response);
. . . . . . . ..I'll get a ""java.lang.ClassFormatError: Incompatible magic value 1008813135 in class file diagram
" -Error what means (referenced on the articles I've read here), that the diagram.class Is not found !
I have tried to put the class file in a JAR, in different locations... using the codebase and archive tag but NOTHING solved my problem.
So my question:
Why I'm able to access the JSP-File directly and seeing the applet but after forwarding to the JSP-File via the Servlet, I'm not able to see anything.
Would appreciate your help
Thank you and best regards
Edit:
1) I'm able to download the diag.jar and diagram.class file from different locations
2)I recognized, that after using the servlet, my url is changing from
localhost:8080/jaw
to
localhost:8080/jaw/controller
I tried added the class file to the position, where the controller-class file is, but without sucess.
3)Opening the class-file with a hex-editor shows me, that
the first bytes are
"CAFEBABE0000002E02B9070002010007"
(http://forum.java.sun.com/thread.jspa?threadID=648990&messageID=3820701)
Message was edited by:
Khaled01

Hello everybody,
I finaly have found the solution (after 16 hours).
Like I mentioned before, I recognized (maybe a little to late), that my path is changing when I'm using the servlet :
localhost:8080/jaw
to
localhost:8080/jaw/controller
(made by url-pattern in my web.xml).
So when my JSP tries to acces the class file, It's looking at:
localhost:8080/jaw/controller/applet/diagram.class
but the file is in:
localhost:8080/jaw/applet/diagram.class
So the solution is, to but a codebase-tag in my applet-declaration with following delcaration "basedir="../applet"
I hope I'll help somebody with the same problems. It took me a day to find out, that the solution was two points and a slash..... lol
Regards to everybody

Run applet on a PDA

Similar Messages

Maybe you are looking for