Run CS3 and 8 at the same time on mac?

I want to download a trial version of the CS3 and run it, at
the same time, as my existing Dreamweaver 8 on my G5 Mac running
10.4.10. (It is NOT an Intel Mac.) There is a 30 day trial and this
way, in the downtime between projects, I can test out and use the
CS3 version and make sure it is stable on my system, learn to use
it a bit, set it up the way I would want it, but always be able to
cut back to 8 in a pinch if I have mission critical work that must
get done. I know 8 like the back of my hand and know nothing about
CS3 version, so I like the safety net of being able to run them
both.
Any issues with this? Is it possible? Will it break anything
- like with my stable and running CS2 apps and Acrobat 7?

On Fri, 22 Aug 2008 04:46:57 +0000 (UTC), "yuytjtdh"
<[email protected]> wrote:
>I want to download a trial version of the CS3 and run it,
at the same time, as
>my existing Dreamweaver 8 on my G5 Mac running 10.4.10.
(It is NOT an Intel
>Mac.)
You can have several versions of Dw on your system ( I have
Dw2004 up
to CS4 beta ) but you can only have one running at a time on
a
standard machine.
>There is a 30 day trial and this way, in the downtime
between projects, I
>can test out and use the CS3 version and make sure it is
stable on my system,
>learn to use it a bit, set it up the way I would want it,
but always be able to
>cut back to 8 in a pinch if I have mission critical work
that must get done. I
>know 8 like the back of my hand and know nothing about
CS3 version, so I like
>the safety net of being able to run them both.
>
> Any issues with this? Is it possible? Will it break
anything - like with my
>stable and running CS2 apps and Acrobat 7?
CS3 is rather stricter about code - so depending on how well
your code
validates - it may complain if there are any problems.
Bear in mind that CS4 may be released sometime in the next
few months
- there is no public info when that will be - so maybe better
to wait
for that.
~Malcolm~*...
~*

Similar Messages

My MacBook is almost two years old and has started running really slow. It gets bogged down when it is running different programs at the same time, like Safari and Pages. It didn't react this way until recently. Any advice would be very welcome.

My MacBook is almost two years old and has started running really slow. It gets bogged down when it is running different programs at the same time, like Safari and Pages. It didn't react this way until recently. Any advice would be very welcome.

Launch Disk Utility and select the icon of the internal drive (the drive itself, not the volume icons below it.) Is the SMART status "Verified?" If not, replace the drive immediately. If the status is "Verified," the drive may still be failing. Back up all data, if you haven't already done so. Reinstall Mac OS X, then run Software Update. Test with all wired peripherals disconnected. If it's still slow, you have a hardware problem.
Mac OS X 10.6 Help: Reinstalling Mac OS X

"Newbie" Unable to run two actions at the same time please help

Hello
I'm a newbie (2 weeks) on Labview, so I hope my problem will sound easy for some of you.
I want to read a file and at the same time get the reading from my sensors (4 sensors).
My program is working when I do each thing in a different program but when I add them the program only read the text file and stop reading the sensor signals...I attach the program file.
The goal is with the text file to add an exact time for each sensor signal I record.
Is there any other possibilities to include a time with the sensors signals recorded ? I need to do this to synchronize the sensors values with CAM program.
Thanks
/Xavier
Ps I used a scan rate of 12000/s but I try 1000/s
and the sensor acquisition is still not working
Attachments:
test3Rdif2802.vi ‏493 KB
readfile.txt ‏195 KB
sensoracquisition30s.txt ‏210 KB

from a glance at your code, it appears that you have nested a loop to read your file, inside a loop to read your sensors. this means the nested loop to read your file must finish before the outside loop to read your sensors can run through another iteration. what you want to do is separate the two loops to run independently of each other (in parallel). use a global variable to know when to stop the loop (if they need to stop at the same time) and if you need to pass data between the loops use a queue (easiest) or you can also use globals with semaphores.

Need to run windows OS on my macbook pro at the same time with MAC OS. what do i use

I need to run windows OS & office so i can access my company server. What is the best platform to use & which will enable you to run both oS at the same time.
Thanks

Depending on the specific features that you think you need in a Virtual Machine, you should research the paid "Parallels" and "VMWare Fusion", and the free yet very capable "VirtualBox". I personally use VirtualBox because it does NOT include all of the Mac-to-VM interactivity features that the others do. For performance and security reasons, I specifically do not want my VM to be able to interact with my Mac OS host in any way other than copy and paste.
On your Windows VM, if you are running windows 8.1, and are not logged in as an administrator as your primary account, then the built in Windows Defender is a perfectly suitable for anti-malware protection. If you are running Windows 7 (or 8.1) and want additional protection I would recommend "BitDefender Free" as it has great protection yet has a very light-weight performance hit.

Nsert/Update and Add Column at the same Table and at the "same" Time

Hello,
I want Insert/Update and Add Column at the same Table and at the "same" Time but in different sessions.
Example:
At first the "insert/update" statement:
Insert into TestTable (Testid,Value) values (1,5105);
After that the "add" statement:
Alter table TestTable add TestColumn number;
- sadly now I get the message: ORA-00054: resource busy and acquire with NOWAIT specified
"insert/update" statement:
Insert into TestTable (Testid,Value) values (2,1135);
After that the execute commit.
I don't know when the first session set the commit statement so I want that the DB the "Alter Table..." statement execute if it's possible.
If it's possible I want to save a repeat loop with the "Alter Table..." statemtent.
Thanks for ideas

Well I want to walk in the rain without and umbrella and still stay dry, but it ain't gonna happen.
You can't run a DDL statement against a table with transactions pending. Session 2 has to wait until session commits or rollbacks (or until the session is killed). That's just the way it is.
This makes sense if you think about it. The data dictionary has to be consistent across all sessions. If session 2 was allowed to change the table structure whilst session 1 has a pending transaction then the database is in an inconsistent state. This is easier to see if you consider the reverse situation - the ALTER TABLE statement run by session 2 does a DROP COLUMN TESTID rather than adding a column: now what should happen to session 1's INSERT statement? You have retrospectively invalidated a statement that was perfectly legal when it was executed.
If it's possible I want to save a repeat loop with the "Alter Table..." statemtent.Fnord.
Cheers, APC

Midp 2.0: is it possible to run 2 timers at the same time?

elo! jz wondering if its possible to run 2 timers at the same time..

actually, im going to use the first timer for the character's animation such as walking.. the other timer i'll use for timing the 'walking activity' of the character (let's say, 3 seconds walking).. after 3 seconds, the character will stop and do other activity aside from walking..
p.s.
im mentioning about timers in midp 2.0 :)

Can i run two widgets at the same time on the same page?

Can i run two widgets at the same time on the same page?
Hi
I have created and published 4 free ibooks and i would to run two widgets
- a countdown clock
- a review test
at the same time on the page. Can i do that?
Thanks in advance
Haris

thanks for your answer. Yes indeed HTML widgets run only full screen (snif snif). I consider this as a "distinguishing treatment".
One solution i read !!!!! was to create through keynote a countdown clock, to export to quicktime move and to imported at iBA predefined widgets. of course this is not the solution i need.
So, in order to have at the same widget and run together a count down clock and a preview test (20 questions) i must
1)"hack" the preview widget and insert a countdown clock
2) create a preview test using iAD.....
thanks again
haris

Run two VIs at the same time

Hello!
I want to know how i can run two VIs at the same time.
I mean that i want to run a second VI ( N.2) while another VI (N.1) is in
execution without suspend it (N.1)
If anyone has suggestions, please help me!
Thank you very much.
roby.

If you say "run a vi", I assume that you have the VI open in LabVIEW, then press the run button. (Some of the earlier answers taks about programmatically calling VIs, which I don't think is the focus of your question)
You can run as many VIs as you want at the same time. Simply press the run button of the second VI and they will both run.
Of course you should ensure that they don't use the same resources (e.g. DAQ device, or listen on the same TCP port, etc.) In these cases, the second VI might fail. (Also if the second VI is a subVI of the first VI, you won't be able to run it seperately, because it will be already running.)
LabVIEW Champion . Do more with less code and in less time .

Some fonts stopped showing as available on ID CS3, though at the same time they ARE showing as avail

Some Adobe fonts stopped showing as available on ID CS3, though at the same time they ARE showing as available on AI CS3. How do I get them to show up so I can select them?

Modified "computer" to unhide hidden, system files.
Searched for "InDesign SavedData" and "InDesign Defaults" yet none show up for either.

Delete records in a table and at the same time print out for reference

I am working on a req to delete some records from a table and at the same time, record/print the deleted records in the outstream (DBMS_OUTPUT.PUT_LINE)
DECLARE
v_rec_po hst_po%ROWTYPE;
BEGIN
DELETE FROM hst_po po
WHERE abbrpoid = '&opportunity_code'
AND updatedby = (SELECT employeeid
FROM tes_employee
WHERE name = &emp_name)
AND audittimestamp BETWEEN TO_DATE ('&start_timestamp',
'DD-MON-YYYY HH24:MI'
AND TO_DATE ('&end_timestamp',
'DD-MON-YYYY HH24:MI'
END;
I was thinking of using returning into and then using DBMS_output to pull out the delted records, but there will be multiple rows deleted fro this statements. I am stuck here..Can anyone help

How about:
SQL> create table t
2 (x int)
3 /
Table created.
SQL> insert into t
2 select rownum
3    from all_objects
4   where rownum <= 10
5 /
10 rows created.
SQL> declare
2     cnt pls_integer;
3 begin
4     delete from t;
5     cnt := sql%rowcount;
6     dbms_output.put_line ('Removed: '||to_Char (cnt));
7 end;
8 /
Removed: 10
PL/SQL procedure successfully completed.Edited by: Alex Nuijten on Jun 4, 2009 8:58 AM

Is there a way I can stream video from my 2012 AirMac to the Apple TV using airplay and at the same time stream the audio to an air speaker?

Is there a way stream video from a 2012 MacBook Air to a TV using Apple TV and at the same time steam the audio to an air speaker. Also the same question but using an ipad

You can try one thing. Follow these steps:
1. On your Mac, turn on AirPlay Mirroring and connect it to the Apple TV, so audio and video will stream from the Apple TV.
2. Turn off the sound of the TV where you have connected the Apple TV.
3. Then, make sure that you have turned on the AirPlay speakers. Then, open System Preferences > Sound > Output, and choose the external speakers, so sound will stream from these external speakers.
This should work correctly

How to collect form responses in adobe formscentral and at the same time receive form responses through email

My client wants to have the form that I created in FormsCentral to be able to collect email responses. So to do this, I downloaded the form as PDF then imported it into Acrobat. I created a button in Acrobat (this will be for the email response part). I used this script for that function:
// This is the form return email. It's hardcoded
// so that the form is always returned to the same address.
// Change address on your form to match the code below
var cToAddr = "[email protected]"
// First, get the client CC email address
var cCCAddr = this.getField("ClientEmail").value;
// Now get the beneficiary email only if it is filled out
var cBenAddr = this.getField("BennyEmail").value;
if(cBenAddr != "")
cCCAddr += ";" + cBenAddr;
// Set the subject and body text for the email message
var cSubLine = "Form X-1 returned from client"
var cBody = "Thank you for submitting your form.\n" + "Save the filled form attachment for your own records"
// Send the entire PDF as a file attachment on an email
this.mailDoc({bUI: true, cTo: cToAddr, cCc: cCCAddr, cSubject: cSubLine, cMsg: cBody});
I got it from here: http://acrobatusers.com/tutorials/dynamically-setting-submit-e-mail-address
I'm still kinda not sure how it works but I'm getting the idea. Now what I'm having trouble with is, how do I make it so that the user will be required to click on the scripted button and at the same time, also click on the FormsCentral's generated submit button? Because as I see it, the user can click on the scripted button but they can just close out the form without submitting it to FormsCentral.
Is there any way to make my idea work?
Any help is very much appreciated!
Thanks!

I do not know or have time right now to look up NDP format.
To write to NTFS from Mac, you need a driver.
And to write to HFS from Windows also.
I strongly recommend Paragon drivers for both.
That way you can access anything from any platform.
Paragon Software for Mac

How can I copy documents from a Sharepoint On Premises library to a Sharepoint Online library and at the same time preserving their metadata?

How can I copy documents from a Sharepoint On Premises library to a Sharepoint Online library and at the same time preserving their metadata?
I use the Open Explorer Windows to drag and drop the files, but the metadata are not copied. Thanks.

To maintain the metadata you'll need to use one of the third party tools that does this kind of migration. Metalogix has a product with a free trial that we have used before. (Don't remember whether the free version maintains metadata or not).
You can read about it here:
http://www.metalogix.com/Products/Content-Matrix.aspx
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Bluetooth seems like working since last week and at the same time I can't manage the Wi-Fi

Bluetooth seems like working since last week and at the same time I can't manage the Wi-Fi. I have already restored.

This entire thing is a hair over four months old, I don't think it should be acting up this much. Plus, this problem happens only once out of every 40 or 50 times I start this thing up. It's very infrequent, but it's there, and it just bothers me, I guess.
That said, I would try reinstalling, but I wouldn't be able to tell if it'd worked unless the problem never cropped up again in a long, long time. Sadly I also don't have access to my OSX discs at the moment (I'm out of the country).

How do i get a still image to fade the same way and at the same time as a video?

I have a video stacked on top of a still image. When i add a transition, the still turns to a black screen while the video fades in accordance to the transition. How do i get the still image to fade the same way and at the same time as the video?

I do. I've applied it to both the still image and the video. Say i used the lens flare transition. If i apply it to both the video and the still image, the video will dissolve in to the next frame, but the still image will go to a black screen and then jump to the next frame. Its almost as if i inserted a black frame instead of a transition, but only for 2 seconds. Below is kind of a peek what it looks like.

Create SP that returns value and at the same time displays query result in output window

I would like create an SP which will return the records from the table and also return value to my c# client application.
For Example:
Select * from employee returns all the query results in output window.
Now I want to create an SP
Create procedure Test
As
Declare @ret int,
Select * from employee
set @ret = Select count(*) from employee
if @ret > 0
return 1
else
return 0
The above algo should return 1 0r 0 to c# client application and at the same time display all employees in sql query output window.
Can u pls help in this regard.

The above algo should return 1 0r 0 to c# client application and at the same time display all employees in sql query output window.
Why? and No!
Why? Your procedure generates a resultset of some number of rows. You check the resultset for the presence of rows to determine if "anything is there". You don't need a separate value to tell you this. Note that it helps
to post tsql that is syntactically correct. While we're at it, if you just need to know that rows exist there is no need to count them since that does more work than required. Simply test for existence using the appropriately-named function
"exists". E.g., if exists (select * from dbo.employee).
No! A stored procedure does not display anything anywhere. The application which executes the procedures is responsible for the consumption of the resultset; it chooses what to do and what to display.
Lastly, do not get into the lazy habit of using the asterisk in your tsql code. That is not best practice. Along with that, you should also get into the following best practice habits:
schema-qualify your objects (i.e., dbo.employee)
terminate every statement - it will eventually be required.

Run CS3 and 8 at the same time on mac?

Similar Messages

Maybe you are looking for