Run datamanager issue

Hi
I want to create a package in 7.0 msbpc
i have copied fx_trans and followed these steps
edata
organize package
1.copied fxtrans
2.changed the destination to data management
3.save
4.the apckage list updated successfully
the package does not exist
again
edata
organize package
copy package
modify copied fx trans.lgf
package type : file
file
systemfiles\Indirect Sales Calc
pacakge name : Indirect Sales Calc
description:Indirect Sales Calc
group: datamanagement
user pacakge checked
admin package checked
save
save again
the package list is successfully updated
ok
edata
run pacakge
i see the list with my package untill the pacakges groups are all displayed and
now once the package groups are displayed immdtly in fraction of a second the newly create package vanishes
it is no longer inthe list of datamanagement and allother groups also does not contain it
i have donea small research on it
my user preivileges are
primary admin
admin fulltask
admin mbraccprf
admin full task
please advice where i am doign wrong ,for which i am nt able to copy create or add the dm pkg
thanks
lakshmi

Similar Messages

I have CS2 and would like to do Image Stacking. I understand CS3 allows this. correct? Am I wiser to purchase CS3 upgrade. Am I going to run into issues with install?

I have CS2 and would like to do Image Stacking. I understand CS3 allows this. correct? Am I wiser to purchase CS3 upgrade. Am I going to run into issues with install?

Well, I refuse to sign up to pay Adobe a monthly tribute for life too, but that doesn't mean we are limited to CS3.
I'm staying with CS6.
Adobe still sells a perpetual-license to Photoshop CS6 without the subscription model, but it's $700 for the Standard version and a cool $1,000 for the Extended version.
You haven't mentioned your platform, Macintosh or Windows, so make sure CS3 or any other obsolete version you buy actually runs on a modern operating system.
Good luck.

Running Total Issue: How to calculate counts excluding suppressed records

Post Author: benny
CA Forum: Formula
Hello All:
I have a current report that gives the total counts of work requests. However, in my section expert, there are some records in the detail that are suppressed (if there isn't any backlog). The current running totals are counting all the records including the suppressed records. I think I need three formulas:1. Calculate the counts2. Calculate the counts excluding suppressed records3. Reseting the counts by group
May I ask if someone can give me an example of what I should do?
Thanks so much!
Benny

Post Author: benny
CA Forum: Formula
Bettername,
Actually, I should have been more specific. This report is actually a PM backlog report. It displays all the work requests (PM) issued including the backlogged. There are 9 columns (including one called Backlog) for the different counts of the pm's based from the status codes (Issued, Material on Order, Completed, Cancelled, etc) of the work requests. The detail records of worke requests are grouped by shop and PM end date. The running totals are calculated at the pm date group level (group footer#2). Then based from those at the shop group level (group footer#1) there is a grand total of counts of the running totals. The detail records and pm end date group header (group header #2) are suppressed.
Now the foremen would like the report to just display all the backlogged PMs. Using the section expert, I suppressed all the PM issued that have no back log ({@ backlog = 0}) and just display the back logged pm's. This is where I run into the running total issue.
This is very involved report and I will use the column PM Issued as an example. I can still use the same logic as you suggested?
1. declaration formula:
whileprintingrecords;numbervar pmissued := 0;
2. Suppression formula that uses the variable:
whileprintingrecords;
numbervar pmissued;
if ({@ backlog = 0}) then pmissued:= pmissed else pmissued:=pmissuedr+1
3. Display formula:whileprintingrecords;
numbervar pmissued;
If this is the right track, then I can use the same example for the other columns.
Thanks so much.
Benny

I own CS4, upgraded to CS5, then joined CS6, CC... and now I installed CC14. Which will be the best way to delete or uninstall the programs I don't need keeping only CC14 without running into issues? I have an Alienware Area 51 PC running Windows 7.

I own CS4, upgraded to CS5, then joined CS6, CC... and now I installed CC14. Which will be the best way to delete or uninstall the programs I don't need keeping only CC14 without running into issues? I have an Alienware Area 51 PC running Windows 7.

Which will be the best way to delete or uninstall the programs I don't need keeping only CC14 without running into issues?
There is none. Whatever you do to get rid of the older versions will inevitably do damage to shared components and other stuff of the new versions as well. That's just how it is with this approach... Uninstall the older versions, run the cleaner tool then reinstall CC 2014.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium

Has anyone run into issues upgrading to ios 8.1.3?

has anyone run into issues after upgrading to IOS 8.1.3 on the iphone 6 plus?

Call Apple support -- or send at least send feedback
http://www.apple.com/feedback/>Apple - Feedback
Also try internet search as there are other blogs/magazines that have forums going with possible solutions to issues
One is - and they probably have articles on the IPHONE6
http://appleinsider.com/articles/14/09/26/ios-8-tells-you-what-app-is-draining-y our-iphones-battery

Admin server running into issues in SOA.

Hi All,
Can anyone help me.
I have recently installed Oracle SOA suite on Linux box. While I was running the Admin Server I am running into Some issues. Though Admin Server is running fine but all that I am running out of memory because of the Logs. Can anyone help me find the issue and solve. I can do some other arrangements to save memory. IF you could help me for any issue I would be so happy. One more thing SOA suite installed on Admin server instead soa_server1 or soa_server2. I still need to SOA-infra setup onto soa_server1 or soa_server2(on different remote machines) [if this info could help also.]
This issue is repeating every 5 secs.
<Jul 16, 2013 5:35:21 PM EDT> <Error> <oracle.soa.mediator.common.listener> <BEA-000000> <DBLocker caught exception while retrieving locked messages. Will retry retrieval after 2 seconds
Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.6.0) (Build 111018)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLSyntaxErrorException: ORA-00904: "TENANT_ID": invalid identifier
Error Code: 904
Call: SELECT CASE_ID, CONTAINER_ID, DUMMY1, MSG_ID, COMPONENT_DN, OPERATION, CREATION_DATE, PRIORITY, COMPONENT_STATUS, QNAME_LOCAL_PART, CASE_INFO, QNAME_NAMESPACE, LOCK_TIME, SOURCE_URI, TENANT_ID, INSTANCE_CREATED, IS_EVENT, STATUS FROM MEDIATOR_DEFERRED_MESSAGE WHERE (((STATUS = ?) AND (LOCK_TIME = ?)) AND (CONTAINER_ID = ?))
        bind => [1, 2013-07-16 17:23:12.814, A8424220EE5D11E2BF9C6D1C72885086]
Query: ReadAllQuery(oracle.tip.mediator.common.persistence.MediatorDeferredMessage)
        at oracle.toplink.exceptions.DatabaseException.sqlException(DatabaseException.java:305)
        at oracle.toplink.internal.databaseaccess.DatabaseAccessor.basicExecuteCall(DatabaseAccessor.java:614)
        at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeCall(DatabaseAccessor.java:468)
        at oracle.toplink.threetier.ServerSession.executeCall(ServerSession.java:447)
        at oracle.toplink.internal.sessions.IsolatedClientSession.executeCall(IsolatedClientSession.java:117)
        at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:193)
        at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:179)
        at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.executeSelectCall(DatasourceCallQueryMechanism.java:250)
        at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.selectAllRows(DatasourceCallQueryMechanism.java:583)
        at oracle.toplink.internal.queryframework.ExpressionQueryMechanism.selectAllRowsFromTable(ExpressionQueryMechanism.java:2500)
        at oracle.toplink.internal.queryframework.ExpressionQueryMechanism.selectAllRows(ExpressionQueryMechanism.java:2458)
        at oracle.toplink.queryframework.ReadAllQuery.executeObjectLevelReadQuery(ReadAllQuery.java:467)
        at oracle.toplink.queryframework.ObjectLevelReadQuery.executeDatabaseQuery(ObjectLevelReadQuery.java:874)
        at oracle.toplink.queryframework.DatabaseQuery.execute(DatabaseQuery.java:679)
        at oracle.toplink.queryframework.ObjectLevelReadQuery.execute(ObjectLevelReadQuery.java:835)
        at oracle.toplink.queryframework.ReadAllQuery.execute(ReadAllQuery.java:445)
        at oracle.toplink.internal.sessions.AbstractSession.internalExecuteQuery(AbstractSession.java:2265)
        at oracle.toplink.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1079)
        at oracle.toplink.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1063)
        at oracle.toplink.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1037)
        at oracle.toplink.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1009)
        at oracle.tip.mediator.dispatch.db.DBAccess.getMessageFromDB(DBAccess.java:800)
        at oracle.tip.mediator.dispatch.db.DBAccess.getDeferredMessages(DBAccess.java:821)
        at oracle.tip.mediator.dispatch.db.DeferredDBLocker.getLockedMessages(DeferredDBLocker.java:153)
        at oracle.tip.mediator.common.listener.DBLocker.getLockedMessages(DBLocker.java:173)
        at oracle.tip.mediator.common.listener.DBLocker.run(DBLocker.java:93)
        at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
        at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
        at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused By: java.sql.SQLSyntaxErrorException: ORA-00904: "TENANT_ID": invalid identifier
        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
        at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
        at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
        at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
        at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
        at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
        at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:947)
        at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1283)
        at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1441)
        at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3769)
        at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3823)
        at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1671)
        at weblogic.jdbc.wrapper.PreparedStatement.executeQuery(PreparedStatement.java:135)
        at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeSelect(DatabaseAccessor.java:814)
        at oracle.toplink.internal.databaseaccess.DatabaseAccessor.basicExecuteCall(DatabaseAccessor.java:540)
        at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeCall(DatabaseAccessor.java:468)
        at oracle.toplink.threetier.ServerSession.executeCall(ServerSession.java:447)
        at oracle.toplink.internal.sessions.IsolatedClientSession.executeCall(IsolatedClientSession.java:117)
        at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:193)
        at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:179)
        at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.executeSelectCall(DatasourceCallQueryMechanism.java:250)
        at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.selectAllRows(DatasourceCallQueryMechanism.java:583)
        at oracle.toplink.internal.queryframework.ExpressionQueryMechanism.selectAllRowsFromTable(ExpressionQueryMechanism.java:2500)
        at oracle.toplink.internal.queryframework.ExpressionQueryMechanism.selectAllRows(ExpressionQueryMechanism.java:2458)
        at oracle.toplink.queryframework.ReadAllQuery.executeObjectLevelReadQuery(ReadAllQuery.java:467)
        at oracle.toplink.queryframework.ObjectLevelReadQuery.executeDatabaseQuery(ObjectLevelReadQuery.java:874)
        at oracle.toplink.queryframework.DatabaseQuery.execute(DatabaseQuery.java:679)
        at oracle.toplink.queryframework.ObjectLevelReadQuery.execute(ObjectLevelReadQuery.java:835)
        at oracle.toplink.queryframework.ReadAllQuery.execute(ReadAllQuery.java:445)
        at oracle.toplink.internal.sessions.AbstractSession.internalExecuteQuery(AbstractSession.java:2265)
        at oracle.toplink.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1079)
        at oracle.toplink.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1063)
        at oracle.toplink.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1037)
        at oracle.toplink.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1009)
        at oracle.tip.mediator.dispatch.db.DBAccess.getMessageFromDB(DBAccess.java:800)
        at oracle.tip.mediator.dispatch.db.DBAccess.getDeferredMessages(DBAccess.java:821)
        at oracle.tip.mediator.dispatch.db.DeferredDBLocker.getLockedMessages(DeferredDBLocker.java:153)
        at oracle.tip.mediator.common.listener.DBLocker.getLockedMessages(DBLocker.java:173)
        at oracle.tip.mediator.common.listener.DBLocker.run(DBLocker.java:93)
        at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
        at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
        at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Thank you all.

Hi Ravi,
You are much appreciated for your valuable time and knowledge..
Then delete old domain. Its corrupted. You can clean it by manually updating jdbc datasource files under config/jdbc folder. But I will NOT recommend this. Just delete this domain folder and from user_projects/appliations also delete the folder with same domain name.
Create a brand new domain using config wizard. Select SOA or BPM whichever you want, and also Enterprise Manager. Then at database, carefully select 11.7 Schemas that you created earlier.
Though I have not created a new domain. (still Ravi is correct)
Issues were resolved by updating the new RCU schema with latest version of RCU 11.1.1.7.
Here What I did is ran the rcu.bat on my local and connected to remote DB.created new schema for each components namely soa-infra,orabam,owsm,MDS. with a new prefix.
I did not drop the previous schema for SOA.
went to *Domain-home*/config/jdbc/
took the back up for all the *.xml files excluding read.xml(anyway its just an info file).
Now edited the schema component. Someone might change their schema component password. but my suggestion is not to give any new passwords to the schema components while creating new RCU schema for SOA.
What I did is changed the component passwords (I know how to mess up and also know how to fix if it's messed up) and ended up with errors.
So I have now started the server with the command
./startWebLogic.sh -Dweblogic.configuration.schemaValidationEnabled=false
Still I had errors coming up. But I least bothered about the errors because these errors can be solved once get to know what you are doing.
My server started. Happy then
Went to admin-url:port/console
then Home>Summary of JDBC Data Sources
next lock & edit
select each jdbc component and changed the password and confirm password for each
then save each time for each next activate the changes.
(as I changed all components passwords like <password-encrypted>asdl;lasdfadf=<password-encrypted/>   to <password>welcome1=<password/> in each *.xml file at *domain-home/config/jdbc*)
I have restarted the Admin server from Command prompt. Expecting that I was doing correct.
Succeeded. I did not believe that I have seen not even a single error.
My sincere request that don't mess up with any *.xml file if you are not sure and make sure to take a back up
Thank you.
Thanks a lot.
-Seshikanth

Odd Run As issue with Windows 8.1 - Run As domain administrator not working

I'm having an odd issue on a Windows 8.1 laptop. I log in with my standard account, but want to open things like group policy management with my special separate domain admin account. so I press shift, right click, run as a different user - fill in my username
and password and get an access denied message. I verified I was using the right account info, verified UAC was turned off. I can run it as my non-domain admin account but of course I don't have access to everything. In the event viewer, I'm getting these messages:
Application log:
svchost (1648) SRUJet: An attempt to open the file "C:\Windows\system32\SRU\SRU.log" for read / write access failed with system error 5 (0x00000005): "Access is denied. ". The open file operation will fail with error -1032 (0xfffffbf8).
This and a few other similar messages show up in the application log, over and over again.
Also the Application log has a couple of these, showing up only when I try to open as the domain admin account:
Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards. No user action is required.
DETAIL -
1 user registry handles leaked from \Registry\User\S-1-5-21-1856965257-1504725669-3833077565-143885_Classes:
Process 1072 (\Device\HarddiskVolume1\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-1856965257-1504725669-3833077565-143885_CLASSES
Any help would be greatly appreciated. I'm at a complete loss.
As a quick edit - I also am not out of space on the hard drive, I have many gigs on my partition left.

Hi,
This issue may occur if you do not have the appropriate permissions assigned to the folder.
Please make sure you have the sufficient permission to access the folder:
logon with that domain admin account to check if you could access that file.
If it works fine, logon with that domain standard user account do it again.
In addition, why didn't you run as administrator directly(don't use
Run as different user)?
Karen Hu
TechNet Community Support

Running Total Issue or Possibly Formula Issue in Crystal Reports 9

Post Author: Jeffs23
CA Forum: Formula
My issue involves two formula's - @TotalTime and @Converted Time and a Running Total (RTotal0).
@TotalTime{Data.ApptTime}/60@Converted Timenumbervar x := {#RTotal0};totext(truncate(x),0,"")" Hrs "totext(remainder(x,truncate(x))*60,0,"") + " Mins"Running Total (RTotal0)
Field to Summarize - @TotalTime
Type of Summary - sum
Under Evaluate Section:
"Use a Formula":
onfirstrecord or
{Data.ResourceStart} <> previous({Data.ResourceStart}) or
{Data.Resource} <> previous({Data.Resource})
) and
minimum({Data.ApptKind},{Data.ResourceStart}) = 1 AND
maximum({Data.Column},{Data.ResourceStart}) >= '1'
Reset on change of field {Data.Resource}
A little background:My report deals with a Doctors schedule. In the doctors schedule, a appointment is booked and is by default placed into Column 1. It always defaults to Column 1. If the provider elects to double book their time and schedule another patient at the exact same time, the second appointment hits column 2. It expands in essence. It is possible to have up to 4 appointments in one time slot. This is why we wait forever at the Doctors office - appointments get overbooked because patients cancel or no show frequently and the provider would rather have the patients wait then risk no appointment at all. My Client wants the "TOTAL TIME" a provider was "scheduled" to see patients, not the time they actually saw the patients. So if the Provider was scheduled to see patients from 8 am to noon and had patients doublebooked for every time slot, I only want to report the overall time he saw patients regardless of the doublebooking, triplebooking or quadruplebooking. So the total time for my example should be 4 hours not 8 hours. The good news is this is painfully close to being correct! What is currently happening, is if the schedule contains more than 1 facility the time calculates wrong. I think my issue may be in the running Total but not 100% sure. I need it to calculate time on each facility - {Data.Facility}.

Post Author: Jeffs23
CA Forum: Formula
I had some minor issues with my formulas and Running Total so I modified them alittle:
@TotalTime
If {Data.ApptTime} = 0 then 0else {Data.ApptTime}
@Converted Time
If {#RTotal0} = 0 then "--"else ToText(Truncate({#RTotal0}/60),0,"") + " Hour(s), " + ToText(Remainder({#RTotal0},60),0,"") + " Min(s)"
My running total stayed the same.......
Field to Summarize - @TotalTime Type of Summary - sum Under Evaluate Section: "Use a Formula":(onfirstrecord or{Data.ResourceStart} <> previous({Data.ResourceStart}) or{Data.Resource} <> previous({Data.Resource}) ) andminimum({Data.ApptKind},{Data.ResourceStart}) = 1 AND maximum({Data.Column},{Data.ResourceStart}) >= '1' Reset on change of field {Data.Resource}
Some fake sample data:
Resource = Francis, William MD
Facility 1: River Oaks Main Clinic
Facility 2: Western Medical Hospital
Date of Service = 10/25/2007
From 7:15 am to 11:45 am, Patients were treated at Facility 1: River Oaks Main Clinic *** (total time = 4 hours 30 min)
From 12:15 pm to 1:00 pm, Patients were treated at Facility 2: Western Medical Hospital *** (total time = 45 min)
From 1:00 pm to 3:15 pm, Patients were treated at Facility 1: River Oaks Main Clinic *** (total time = 2 Hours 15 min)
The report should tell me Total time at River Oaks Main Clinic = 6 Hours 45 min and 45 min for Western Medical Hospital. What it currently is doing, is reporting the 6 Hours 45 min on the River Oaks Main Clinic and 7 Hours 30 min on the Western Medical Hospital. The time for this facility should be 45 minutes, yet its taking the full provider time and throwing it into this second facility. I am assuming its because the Running total tells it "Reset on change of field {Data.Resource}". Somehow, I need it to evaluate on both the Resource and the Facility. Any suggestions?

USER RUN PACKAGE ISSUE IN BPC NW 7.5 SP 7

Hello,
One of my User is getting Run Package Error while accessing through BPF Instance. It throws the following Error
"PACKAGE DOES NOT EXIST OR YOU DO NOT HAVE AUTHORITY ON THIS PACKAGE" , but other users in the team are able to Run the Pkg.
This user has the same authority as the other users of his team.
Please help me regarding this.
Venkata.

Hi Roberto,
Thank You for the note, This issue is actually persisting to only one user of the team. Wheras other users in the same team were successfully able to execute the Package.
As per the note you provided, I have checked that "File" and "Group" are correct.
Kindly provide a solution for the above problem.
THANK YOU.
Edited by: RaghuKishore on Mar 9, 2012 2:07 PM

Error when running smart issue

Hello,
We are experiencing an error when running most any smart issues in our system. The smart issue 'executes', and then fails, with the following stack trace:
This smart issue request has failed due to the following exception: Error processing Spec Drew Formulation Specification Test 20130322a(5084230-001). Reason: Object reference not set to an instance of an object. Stacktrace: at Xeno.Prodika.GSMLib.Security.SpecPermissionManagerFactory.SpecPermissionManager.UserIsGlobalAdmin(IUserService usrService) at Xeno.Prodika.GSMLib.Security.SpecPermissionManagerFactory.SpecPermissionManager.HasPermission(IPermissionArgs args) at Xeno.Prodika.GSMLib.Security.SpecificationBasedPermissions.HasPermission(String type, EnumPermissions permission, IBaseSpec spec) at Xeno.Prodika.Services.Specification.SpecificationService.HasReadPermission(IBaseSpec spec) at Xeno.P. Please correct the problem and re-issue this request. Smart issue will begin re-issuing where it stopped.
The user performing the smart issue has read permissions on the specifications, and is also in all 3 of the smart issue groups. This happens with multiple users when issuing multiple different specifications. Any thoughts?
Thanks,
Drew

Smart Issue Requests are executed by the remoting container. It sounds like the remoting container user doesn't have access to the specifications.
I believe this user is set in environment settings with the Prodika.RemotingContainer.SysUser node.

Uft 12.01 record and run setting issues

hello,
i am bhumika from CDOT. i am experiencing an issue in record and run settings of UFT 12.01. i have recorded hundreds of scripts for our web application for different modules whose record and run setting was http://192.168.103.74:8080/softswitch/ now i want same scripts to be run on http://192.168.103.183:8080/softswitch/ . now the issue is i want to change the web settings globaly for hundreds of script but UFT allow me to open each script individualy and then change setting for each n every test case wgich is very much time consuming.
Can u please suggest me a solution for globaly changing the web address in record and run settings for the scripts which was earlier recorded on some other address. Immediate solution required
thanks
Bhumika

There is one option
Create VB Script with QTP automation object model and then we can define Run and Record settings for all scripts and Save.

Deploy to web and run local issues

hi guys!
is it normal that when I make links and then while trying to test them(it only works on deploy to web, but the flash content that i have there doesnt displays), the links wont be working at all?
thanks

The Flash Player has a fairly restrictive security model. If you try to open the deploy-to-web version on your local hard drive, you will encounter this type of issue. That version needs to be run within the context of the web server. Hope that helps some.
Chris

Get-ADUser Script Runs but issues error command before returning all results

Greetings;
I am running Windows Server 2008-R2 and try to execute a PowerShell command as follows:
I am trying to locate user objects that have been inactive since September 1 and do not have any Exchange mailboxes. The query does run and I do get a number of records, however, the error is issued, as shown above.
can you please shed some light as to why I am getting this error message? I do appreciate your time.
Behrooz

I see this thread isn't answered yet, so I'm taking another shot at it. I am positive my script is going to give you the results you are looking for. I have reproduced this in my lab.
What I did:
- I created a set of users in an OU in my domain.
- I populated the 'employeeType' property on a handful of them
- I created mailboxes fora subset of those users on my Exchange server
- I did NOT log in with any of these accounts, but that is the easy part.
Run this query and you will get a returned set of accounts that:
- Have not logged on since 9/1/2013
- Do NOT have a mailbox (this is query-able through Get-ADUser because the HomeMDB property is only populated when you have a mailbox. Using the Exchange tools is not necessary)
- Accounts that do NOT have any anything in their 'employeeType' property.
Get-AdUser -filter * -properties * |
Where-Object {$_.HomeMDB -eq $NULL -AND
$_.employeeType -eq $NULL -AND
$_.lastlogondate -ge "9/01/2013"} |
Select displayname,distinguishedname,samaccountname,employeetype |
Export-Csv "employeetype.csv" -notypeinformation
** This result is going to find people with NO employeeType. If that is the opposite of what you're looking for, change that like from -eq (equal) to -ne (not equal) or you can use -like and -notlike. Both give the same results.
Your results will export to a CSV and will not print to the screen. Again, with the way this is written, the employeetype column will be empty.
If you want to copy and paste this script, please paste it into the ISE and push play. If you save it as a .ps1, you'll have to ensure you have the appropriate executionpolicy set (Open PS as an admin, run 'set-executionpolicy unrestricted')
If you chose to run it in a PS window as is, please ensure this whole syntax is all on one line.
Okay! Come back and tell me you were successful and mark me as the answer!! :)
Chris Ream

Itunes 7.1 does not run. Issue with your audio config detection

Hi,
Since I updated to itunes 7.1 the following error message comes up each time I start the program "Itunes cannot run because it has detected a problem with your audio configuration" This happened for the first time right after the update and I have tried to downgrade to the previous version (which was working fine) but now this error occurs with previous version too.
My sound card is a creative sound blaster x-fi and I don't see anything wrong with its configuration.
The OS is Vista premium
Thanks to anyone who can help me with this.
DELL Dimension E520 Other OS Vista and creative sb x-fi

the following error message comes up each time I start the program "Itunes cannot run because it has detected a problem with your audio configuration"
typically that's caused by a broken QuickTime. (iTunes uses QuickTime for audio and video playback.) see the following document for troubleshooting instructions:
iTunes 7 for Windows: iTunes had detected an audio configuration problem

Payment Run Programe Issue Duplicate Enrty in REGUH & REGUP

Dear All
I am facing a problem in F-58 transaction, I have developed customized Cheque format in Smartforms, and I customized the standard payment run program RFFOUS_C to ZRFFOU_C, when I payment with F-58 my predefine format will be printout, it is working fine but some time payment tables(REGUH & REGUP) have duplicate the payment Item anybody have some idea or solution whatu2019s goes wrong. Followings are sample entry
BKPF Entry
MANDT BUKRS BELNR                GJAHR BLART BLDAT         BUDAT           MONAT           CPUDT
100         2000   1500003026 2010    KZ       07.04.2010 07.04.2010    10 07.04.2010 11:02:47
REGUH Entry
MANDT LAUFD      LAUFI   ZBUKR LIFNR      KUNNR EMPFG VBLNR      AVISG WAERS
   100   07.04.2010 00001O 2000   0000120886             1500003026       PKR
100   07.04.2010 00002O   2000   0000120886             1500003026       PKR
REGUP ENTRY
MANDT LAUFD      LAUFI XVORL ZBUKR LIFNR      KUNNR EMPFG VBLNR      BUKRS BELNR
100   07.04.2010 00001O       2000   0000120886             1500003026 BPL   1500003026
100   07.04.2010 00001O       2000   0000120886             1500003026 BPL   1500003026
100   07.04.2010 00002O       2000   0000120886             1500003026 BPL   1500003026
100   07.04.2010 00002O       2000   0000120886             1500003026 BPL   1500003026
Thanks In Advance

The field LAUFI (additional identification) is used to distinguish between several runs with the same reconciliation key date. You can freely define the identification.So multiple entries are result of multiple runs.

Run datamanager issue

Similar Messages

Maybe you are looking for