Run error while loading FPGA host vi
Hi,
I want to use the NI-5640R board and have LV-FPGA installed together with LV 8.2...I have followed the post at :
http://forums.ni.com/ni/board/message?board.id=ifrio&message.id=55
and have taken in the newer drivers etc and the msg thread at :
http://forums.ni.com/ni/board/message?board.id=ifrio&message.id=131
and copied the files from the LV 8.0 area...
Now, when I open up an existing example project (Single Tone Output), open up the Host Block diagram, I see the run button broken with some errors on the Thernal Shutdown subVi...
A software component for your target was not found. Make sure all target files are installed from the target installation CD. Error details:
Error 1059 occurred at New VI Object in StockFPGA_IntfScriptSubVI.vi:4->StockFPGA_ScriptMethod_Reset.vi:1->nirviCallScriptMethPlugin.vi->nirviMethod.xnode:nirviMethod_GenerateCode.vi:1->nirviMethod.xnode:nirviMethod_GenerateCode.vi.ProxyCaller
Possible reason(s):
LabVIEW: Unexpected file type.
I understand that the installation might not be correct ? Any clues on what is missing...
-thanks
anshuman
Hi
Did you do the last step?:
2. Run ...\LabVIEW 8.2\Targets\NI\FPGA\bin\lvfpga_make_resource_cache.exe
On this page?:
http://forums.ni.com/ni/board/message?board.id=ifrio&message.id=131
Jerry
Similar Messages
-
Brasero can't run: error while loading libcamel-1.2.so.13
When i try to run Brasero i receive this error on terminal:
brasero: error while loading shared libraries: libcamel-1.2.so.13: cannot open shared object file: No such file or directoryYesterday - right after the Gnome 2.24 update - I had the same error while trying to start totem.
I know, this is very dirty, but
cd /usr/lib
ln -s libcamel-1.2.so.14.0.0 libcamel-1.2.so.13
did a fine job. I suppose, I missed one of the Gnome packages in my big update...
Cheers,
Sascha -
DAC message while running execution plan - "Error while loading nodes"
I have just installed and setup Informatica 8.6.1, DAC, BI apps 7.9.6 for a Oracle Ebs R12.1.1 source instance
In informatica I have defined 2 relational sources "DataWarehouse" and "ORA_R1211" - the same names as in physical data sources of DAC
I have mentioned the flatfile parameter as "ORA_R1211_Flatfile" in DAC
after successfully build, when I run the ETL the error "Error while loading nodes" occurs.
the log file shows the following details:
START OF ETL
20 SEVERE Sat Apr 23 21:57:58 GST 2011
ANOMALY INFO::: Error while loading nodes.
EXCEPTION CLASS::: java.lang.NullPointerException
com.siebel.etl.engine.core.SessionHandler.getNodes(SessionHandler.java:2842)
com.siebel.etl.engine.core.SessionHandler.loadNodes(SessionHandler.java:473)
com.siebel.etl.engine.core.ETL.thisETLProcess(ETL.java:372)
com.siebel.etl.engine.core.ETL.run(ETL.java:658)
com.siebel.etl.engine.core.ETL.execute(ETL.java:910)
com.siebel.etl.etlmanager.EtlExecutionManager$1.executeEtlProcess(EtlExecutionManager.java:210)
com.siebel.etl.etlmanager.EtlExecutionManager$1.run(EtlExecutionManager.java:165)
java.lang.Thread.run(Thread.java:619)
21 SEVERE Sat Apr 23 21:57:58 GST 2011
* CLOSING THE CONNECTION POOL DataWarehouse
22 SEVERE Sat Apr 23 21:57:58 GST 2011
* CLOSING THE CONNECTION POOL ORA_R1211
23 SEVERE Sat Apr 23 21:57:58 GST 2011
END OF ETL
*****************Hi,
Mark the current EP as completed and re-assemble the subject area, generate parameters and build the EP and run the load.
Thanks,
Navin KumarBolla -
Hi Gurus,
I'm trying to upgrade my test 9.2.0.8 rac to 10.1 rac. I cannot upgrade to 10.2 because of RAM limitations on my test RAC. 10.1 Clusterware software was successfully installed and the daemons are up with OCR and voting disk created. Then during the installation of RAC software at the end, root.sh needs to be run. When I run root.sh, it gave the error: while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory. I have libpthread.so.0 in /lib. I looked up on metalink and found Doc ID: 414163.1 . I unset the LD_ASSUME_KERNEL in vipca (unsetting of LD_ASSUME_KERNEL was not required in srvctl because there was no LD_ASSUME_KERNEL in srvctl). Then I tried to run vipca manually. I receive the following error: Error 0(Native: listNetInterfaces:[3]). I'm able to see xclock and xeyes. So its not a problem with x.
OS: OEL5 32 bit
oifcfg iflist
eth0 192.168.2.0
eth1 10.0.0.0
oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth1 10.1.1.0 global cluster_interconnect
eth0 192.168.2.0 global public
cat /etc/hosts
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
My questions are:
should ping on sunny1vip and sunny2vip be already working? As of now they dont work.
if you look at oifcfg getif, I initially had eth1 10.0.0.0 global cluster_interconnect,eth0 192.168.2.0 global public then I created eth1 10.1.1.0 global cluster_interconnect with setif. Should it be 10.1.1.0 or 10.0.0.0. I looked at the subnet calculator and it says for 10.1.1.1, 10.0.0.0 is the subnet. In metalink they had used 10.10.10.0 and hence I used 10.1.1.0
Any ideas on resolving this issue would be very much appreciated. I had been searching on oracle forums, google, metalink but all of them refer to DOC Id 414163.1 but it does n't seem to work. Please help. Thanks in advance.
Edited by: ayyappa on Aug 20, 2009 10:13 AM
Edited by: ayyappa on Aug 20, 2009 10:14 AM
Edited by: ayyappa on Aug 20, 2009 10:15 AMa step forward towards resolution but i need some help from the gurus.
root# cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
root# /u01/app/oracle/product/crs/bin/oifcfg iflist
eth1 10.0.0.0
eth0 192.168.2.0
root# /u01/app/oracle/product/crs/bin/oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth0 191.168.2.0 global public
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
****ORACLE_HOME environment variable not set!
ORACLE_HOME should be set to the main directory that contain oracle products. set and export ORACLE_HOME, then re-run.
root# export ORACLE_BASE=/u01/app/oracle
root# export ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
root# export ORA_CRS_HOME=/u01/app/oracle/product/crs
root# export PATH=$PATH:$ORACLE_HOME/bin
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP does not exist.
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny1pub -o $ORACLE_HOME -A 192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny2pub -o $ORACLE_HOME -A 192.168.2.44/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP exists.: sunny1vip.ezhome.com/192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny2pub -a
VIP exists.: sunny2vip.ezhome.com/192.168.2.44/255.255.255.0
Once I execute the add nodeapps command as root on node 1, I was able to get vip exists for config nodeapps on node 2. The above 2 statements resulted me with same values on both nodes. After this I executed root.sh on both nodes, I did not receive any errors. It said CRS resources are already configured.
My questions to the gurus are as follows:
Should ping on vip work? It does not work now.
srvctl status nodeapps -n sunny1pub(same result for sunny2pub)
VIP is not running on node: sunny1pub
GSD is not running on node: sunny1pub
PRKO-2016 : Error in checking condition of listener on node: sunny1pub
ONS daemon is not running on node: sunny1pub
[root@sunny1pub ~]# /u01/app/oracle/product/crs/bin/crs_stat -t
Name Type Target State Host
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
Will crs_stat and srvctl status nodeapps -n sunny1pub work after I upgrade my database or should they be working now already? I just choose to install 10.1.0.3 software and after running root.sh on both nodes, I clicked ok and then the End of installation screen appeared. Under installed products, I see 9i home, 10g home, crs home. Under 10g home and crs home, I see cluster nodes(sunny1pub and sunny2pub) So it looks like the 10g software is installed. -
Apache: error while loading shared libraries
linux:/opt/tarantella/bin # ./tarantella security start
- linux.site: Enabled secure connections.
linux:/opt/tarantella/bin #
linux:/opt/tarantella/bin # ./tarantella webserver restart --ssl
Stopping Tomcat servlet container...
Using CLASSPATH:
/opt/tarantella/webserver/tomcat/5.0.28_axis1.2final_jk1.2.8/bin/bootstrap.jar:/opt/tarantella/bin/jdk.i3li_1.5.0_03/lib/tools.jar
Using CATALINA_BASE:
/opt/tarantella/webserver/tomcat/5.0.28_axis1.2final_jk1.2.8
Using CATALINA_HOME:
/opt/tarantella/webserver/tomcat/5.0.28_axis1.2final_jk1.2.8
Using JAVA_HOME: /opt/tarantella/bin/jdk.i3li_1.5.0_03
..OK
Stopping Apache web server...
/opt/tarantella/webserver/apache/1.3.33_mod_ssl-2.8.22_openssl-0.9.7e_jk1.2.8/bin/apachectl
stop: httpd (no pid file) not running
..OK
Starting Tomcat servlet container...
Using CLASSPATH:
/opt/tarantella/webserver/tomcat/5.0.28_axis1.2final_jk1.2.8/bin/bootstrap.jar:/opt/tarantella/bin/jdk.i3li_1.5.0_03/lib/tools.jar
Using CATALINA_BASE:
/opt/tarantella/webserver/tomcat/5.0.28_axis1.2final_jk1.2.8
Using CATALINA_HOME:
/opt/tarantella/webserver/tomcat/5.0.28_axis1.2final_jk1.2.8
Using JAVA_HOME: /opt/tarantella/bin/jdk.i3li_1.5.0_03
..OK
Starting Apache web server...
/opt/tarantella/webserver/apache/1.3.33_mod_ssl-2.8.22_openssl-0.9.7e_jk1.2.8/bin/httpd:
error while loading shared libraries: libgdbm.so.2: cannot open shared
object file: No such file or directory
/opt/tarantella/webserver/apache/1.3.33_mod_ssl-2.8.22_openssl-0.9.7e_jk1.2.8/bin/apachectl
startssl: httpd could not be started
..failed
linux:/opt/tarantella/bin #
linux:/opt/tarantella/bin # ./tarantella restart
Secure Global Desktop services have been stopped.
Starting Secure Global Desktop server (version 4.10.903). Please wait...
Secure Global Desktop services are now available on this host.
linux:/opt/tarantella/bin #Hi
On RedHat 7.3 :
# rpm -q --whatprovides libgdbm.so.2
gdbm-1.8.0-14
Which linux is this? This package is usually part of the base install I think?
Regards
Barrie
On 2005-08-22, Kim <[email protected]> wrote:
>
>
>
>
>
>
linux:/opt/tarantella/bin # ./tarantella security start
- linux.site: Enabled secure connections.
linux:/opt/tarantella/bin #
linux:/opt/tarantella/bin # ./tarantella webserver restart --ssl
Stopping Tomcat servlet container...
Using CLASSPATH:
/opt/tarantella/webserver/tomcat/5.0.28_axis1.2final_jk1.2.8/bin/bootstrap.jar:/opt/tarantella/bin/jdk.i3li_1.5.0_03/lib/tools.jar
Using CATALINA_BASE:
/opt/tarantella/webserver/tomcat/5.0.28_axis1.2final_jk1.2.8
Using CATALINA_HOME:
/opt/tarantella/webserver/tomcat/5.0.28_axis1.2final_jk1.2.8
Using JAVA_HOME: /opt/tarantella/bin/jdk.i3li_1.5.0_03
..OK
Stopping Apache web server...
/opt/tarantella/webserver/apache/1.3.33_mod_ssl-2.8.22_openssl-0.9.7e_jk1.2.8/bin/apachectl
stop: httpd (no pid file) not running
..OK
Starting Tomcat servlet container...
Using CLASSPATH:
/opt/tarantella/webserver/tomcat/5.0.28_axis1.2final_jk1.2.8/bin/bootstrap.jar:/opt/tarantella/bin/jdk.i3li_1.5.0_03/lib/tools.jar
Using CATALINA_BASE:
/opt/tarantella/webserver/tomcat/5.0.28_axis1.2final_jk1.2.8
Using CATALINA_HOME:
/opt/tarantella/webserver/tomcat/5.0.28_axis1.2final_jk1.2.8
Using JAVA_HOME: /opt/tarantella/bin/jdk.i3li_1.5.0_03
..OK
Starting Apache web server...
/opt/tarantella/webserver/apache/1.3.33_mod_ssl-2.8.22_openssl-0.9.7e_jk1.2.8/bin/httpd:
error while loading shared libraries: libgdbm.so.2: cannot open shared
object file: No such file or directory
/opt/tarantella/webserver/apache/1.3.33_mod_ssl-2.8.22_openssl-0.9.7e_jk1.2.8/bin/apachectl
startssl: httpd could not be started
..failed
linux:/opt/tarantella/bin #
linux:/opt/tarantella/bin # ./tarantella restart
Secure Global Desktop services have been stopped.
Starting Secure Global Desktop server (version 4.10.903). Please wait...
Secure Global Desktop services are now available on this host.
linux:/opt/tarantella/bin # -
Error while loading javaGUI from BSP via Applet
Hello Folks,
i saw an interesting Thread by Thomas Jung (SAP) how to starting a R/3 Transaction via javaGUI from a Business Server Page. I did the same steps but get an Java Error while loading the applet. Can anyone help me?
The error listed in the JavaConsole is:
java.security.AccessControlException: access denied (java.util.PropertyPermission com.sap.platin.productType read)
at java.security.AccessControlContext.checkPermission(Unknown Source)
at java.security.AccessController.checkPermission(Unknown Source)
at java.lang.SecurityManager.checkPermission(Unknown Source)
at java.lang.SecurityManager.checkPropertyAccess(Unknown Source)
at java.lang.System.getProperty(Unknown Source)
at com.sap.platin.micro.Version.guessVersionType(Version.java:230)
at com.sap.platin.GuiAppletBase2.findProductType(GuiAppletBase2.java:324)
at com.sap.platin.GuiApplet2.getProductType(GuiApplet2.java:18)
at com.sap.platin.GuiAppletBase2.<init>(GuiAppletBase2.java:54)
at com.sap.platin.GuiApplet2.<init>(GuiApplet2.java:14)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at java.lang.Class.newInstance0(Unknown Source)
at java.lang.Class.newInstance(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
All Jar-Libraries are imported in the Application Mime-Repository...and regardless the JavaGUI is installed on my local host or not, i get the same error...
Thanks in advance for your help,
Christian KremerHi,
You can check the below forums.
DTP with error RSBK257
- Jaimin -
Error while loading shared libraries: librt.so.1: cannot open shared object
error while loading shared libraries: librt.so.1: cannot open shared object
I cant run my apache server v2.2.3.
Can someone help me?
thanks in advanceThat could be an accessibility issue. Check the user with whom you installed Apache server. Check the user has permissions to access the libraries.
-Mahendra. -
Error while loading shared libraries
error while loading shared libraries
I just installed 10g . on a Fedora Core 4 machine and after a reboot I tried to run sqlplus and got this type of error. I also got the same error when trying to lsnrctl status ...
[oracle@localhost ~]$ sqlplus
sqlplus: error while loading shared libraries: /apps/oracle/product/10g/lib/libnnz10.so: cannot restore segment prot after reloc: Permission denied
[oracle@localhost ~]$
declare -x CLASSPATH="/apps/oracle/product/10g/JRE:/apps/oracle/product/10g/jlib:/apps/oracle/product/10g/rdbms/jlib"
declare -x EDITOR="vi"
declare -x G_BROKEN_FILENAMES="1"
declare -x HISTSIZE="1000"
declare -x HOME="/home/oracle"
declare -x HOSTNAME="localhost.localdomain"
declare -x INPUTRC="/etc/inputrc"
declare -x KDEDIR="/usr"
declare -x LANG="en_US.UTF-8"
declare -x LD_LIBRARY_PATH="/apps/oracle/product/10g/lib:/lib:/usr/lib"
declare -x LESSOPEN="|/usr/bin/lesspipe.sh %s"
declare -x LOGNAME="oracle"
declare -x LS_COLORS="no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:"
declare -x MAIL="/var/spool/mail/oracle"
declare -x OLDPWD="/home/oracle"
declare -x ORACLE_BASE="/apps/oracle"
declare -x ORACLE_HOME="/apps/oracle/product/10g"
declare -x ORACLE_SID="TST2"
declare -x ORACLE_TERM="xterm"
declare -x PATH="/apps/oracle/product/10g/bin:/usr/sbin:/apps/oracle/product/10g/bin:/usr/sbin:/apps/oracle/product/10g/bin:/usr/sbin:/apps/oracle/product/10g/bin:/usr/sbin:/apps/oracle/product/10g/bin:/usr/sbin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin"
declare -x PWD="/home/oracle"
declare -x QTDIR="/usr/lib/qt-3.3"
declare -x SHELL="/bin/bash"
declare -x SHLVL="1"
declare -x SSH_ASKPASS="/usr/libexec/openssh/gnome-ssh-askpass"
declare -x SSH_CLIENT="::ffff:192.168.1.152 2503 22"
declare -x SSH_CONNECTION="::ffff:192.168.1.152 2503 ::ffff:192.168.121.8 22"
declare -x SSH_TTY="/dev/pts/2"
declare -x TERM="xterm"
declare -x TMP="/home/oracle/tmp"
declare -x TMPDIR="/home/oracle/tmp"
declare -x USER="oracle"
[oracle@localhost ~]$
Any input would be highly appreciated.
Thanks
Ambrosiusyap. got it..
disabled SELinux then run it.
I didn't get any errors and have it up and running. Here is what I did:
Full Fedora Core 4 install with SELinux enabled (default settings). Then, after install, disable SELinux in the /etc/selinux/config file.
Thanks
Ambrosius -
Getting error While loading data from ERP integrator to HFM
Hello,
We are getting the following error while loading the data from ERPI to HFM.
2013-12-31 22:44:54,133 INFO [AIF]: ERPI Process Start, Process ID: 300
2013-12-31 22:44:54,137 INFO [AIF]: ERPI Logging Level: DEBUG (5)
2013-12-31 22:44:54,139 INFO [AIF]: ERPI Log File: C:\Windows\TEMP\/aif_501_300.log
2013-12-31 22:44:54,141 INFO [AIF]: Jython Version: 2.5.1 (Release_2_5_1:6813, Sep 26 2009, 13:47:54)
[Java HotSpot(TM) 64-Bit Server VM (Oracle Corporation)]
2013-12-31 22:44:54,143 INFO [AIF]: Java Platform: java1.7.0_25
2013-12-31 22:44:56,821 INFO [AIF]: COMM Process Periods - Insert Periods - START
2013-12-31 22:44:56,828 DEBUG [AIF]:
SELECT l.SOURCE_LEDGER_ID
,l.SOURCE_LEDGER_NAME
,l.SOURCE_COA_ID
,l.CALENDAR_ID
,'0' SETID
,l.PERIOD_TYPE
,NULL LEDGER_TABLE_NAME
FROM AIF_BALANCE_RULES br
,AIF_COA_LEDGERS l
WHERE br.RULE_ID = 27
AND l.SOURCE_SYSTEM_ID = br.SOURCE_SYSTEM_ID
AND l.SOURCE_LEDGER_ID = br.SOURCE_LEDGER_ID
2013-12-31 22:44:56,834 DEBUG [AIF]:
INSERT INTO AIF_PROCESS_PERIODS (
PROCESS_ID
,PERIODKEY
,PERIOD_ID
,ADJUSTMENT_PERIOD_FLAG
,GL_PERIOD_YEAR
,GL_PERIOD_NUM
,GL_PERIOD_NAME
,GL_PERIOD_CODE
,GL_EFFECTIVE_PERIOD_NUM
,YEARTARGET
,PERIODTARGET
,IMP_ENTITY_TYPE
,IMP_ENTITY_ID
,IMP_ENTITY_NAME
,TRANS_ENTITY_TYPE
,TRANS_ENTITY_ID
,TRANS_ENTITY_NAME
,PRIOR_PERIOD_FLAG
,SOURCE_LEDGER_ID
SELECT DISTINCT brl.LOADID PROCESS_ID
,pp.PERIODKEY PERIODKEY
,prd.PERIOD_ID
,COALESCE(prd.ADJUSTMENT_PERIOD_FLAG, 'N') ADJUSTMENT_PERIOD_FLAG
,COALESCE(prd.YEAR,0) GL_PERIOD_YEAR
,COALESCE(prd.PERIOD_NUM,0) GL_PERIOD_NUM
,prd.PERIOD_NAME GL_PERIOD_NAME
,COALESCE(prd.PERIOD_CODE, CAST(COALESCE(prd.PERIOD_NUM,0) AS VARCHAR(38))) GL_PERIOD_CODE
,(COALESCE(prd.YEAR,0) * 10000 + COALESCE(prd.PERIOD_NUM,0)) GL_EFFECTIVE_PERIOD_NUM
,COALESCE(ppa.YEARTARGET, pp.YEARTARGET) YEARTARGET
,COALESCE(ppa.PERIODTARGET, pp.PERIODTARGET) PERIODTARGET
,'PROCESS_BAL_IMP' IMP_ENTITY_TYPE
,(COALESCE(prd.YEAR,0) * 10000 + COALESCE(prd.PERIOD_NUM,0)) IMP_ENTITY_ID
,prd.PERIOD_NAME IMP_ENTITY_NAME
,'PROCESS_BAL_TRANS' TRANS_ENTITY_TYPE
,(COALESCE(prd.YEAR,0) * 10000 + COALESCE(prd.PERIOD_NUM,0)) TRANS_ENTITY_ID
,pp.PERIODDESC TRANS_ENTITY_NAME
,'N' PRIOR_PERIOD_FLAG
,1 SOURCE_LEDGER_ID
FROM (
AIF_BAL_RULE_LOADS brl
INNER JOIN TPOVCATEGORY pc
ON pc.CATKEY = brl.CATKEY
INNER JOIN TPOVPERIOD_FLAT_V pp
ON pp.PERIODFREQ = pc.CATFREQ
AND pp.PERIODKEY >= brl.START_PERIODKEY
AND pp.PERIODKEY <= brl.END_PERIODKEY
LEFT OUTER JOIN TPOVPERIODADAPTOR_FLAT_V ppa
ON ppa.PERIODKEY = pp.PERIODKEY
AND ppa.PERIODFREQ = pp.PERIODFREQ
AND ppa.INTSYSTEMKEY = 'FMTEST2'
INNER JOIN AIF_GL_PERIODS_STG prd
ON prd.SOURCE_SYSTEM_ID = 3
AND prd.CALENDAR_ID IN ('10000')
AND prd.SETID = '0'
AND prd.PERIOD_TYPE = 'Month'
AND prd.ADJUSTMENT_PERIOD_FLAG = 'N'
AND prd.START_DATE > pp.PRIORPERIODKEY
AND prd.START_DATE <= pp.PERIODKEY
WHERE brl.LOADID = 300
ORDER BY pp.PERIODKEY
,GL_EFFECTIVE_PERIOD_NUM
2013-12-31 22:44:56,915 INFO [AIF]: COMM Process Periods - Insert Periods - END
2013-12-31 22:44:56,945 INFO [AIF]: COMM Process Periods - Insert Process Details - START
2013-12-31 22:44:56,952 DEBUG [AIF]:
INSERT INTO AIF_PROCESS_DETAILS (
PROCESS_ID
,ENTITY_TYPE
,ENTITY_ID
,ENTITY_NAME
,ENTITY_NAME_ORDER
,TARGET_TABLE_NAME
,EXECUTION_START_TIME
,EXECUTION_END_TIME
,RECORDS_PROCESSED
,STATUS
,LAST_UPDATED_BY
,LAST_UPDATE_DATE
SELECT PROCESS_ID
,ENTITY_TYPE
,ENTITY_ID
,ENTITY_NAME
,ENTITY_NAME_ORDER
,'AIF_EBS_GL_BALANCES_STG' TARGET_TABLE_NAME
,CURRENT_TIMESTAMP EXECUTION_START_TIME
,NULL EXECUTION_END_TIME
,0 RECORDS_PROCESSED
,'PENDING' STATUS
,'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER' LAST_UPDATED_BY
,CURRENT_TIMESTAMP LAST_UPDATE_DATE
FROM (
SELECT DISTINCT PROCESS_ID
,IMP_ENTITY_TYPE ENTITY_TYPE
,IMP_ENTITY_ID ENTITY_ID
,IMP_ENTITY_NAME ENTITY_NAME
,(COALESCE(SOURCE_LEDGER_ID,0) * 100000000 + GL_EFFECTIVE_PERIOD_NUM) ENTITY_NAME_ORDER
FROM AIF_PROCESS_PERIODS
WHERE PROCESS_ID = 300
) q
ORDER BY ENTITY_NAME_ORDER
2013-12-31 22:44:56,963 DEBUG [AIF]:
INSERT INTO AIF_PROCESS_DETAILS (
PROCESS_ID
,ENTITY_TYPE
,ENTITY_ID
,ENTITY_NAME
,ENTITY_NAME_ORDER
,TARGET_TABLE_NAME
,EXECUTION_START_TIME
,EXECUTION_END_TIME
,RECORDS_PROCESSED
,STATUS
,LAST_UPDATED_BY
,LAST_UPDATE_DATE
SELECT PROCESS_ID
,ENTITY_TYPE
,ENTITY_ID
,ENTITY_NAME
,ENTITY_NAME_ORDER
,'TDATASEG' TARGET_TABLE_NAME
,CURRENT_TIMESTAMP EXECUTION_START_TIME
,NULL EXECUTION_END_TIME
,0 RECORDS_PROCESSED
,'PENDING' STATUS
,'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER' LAST_UPDATED_BY
,CURRENT_TIMESTAMP LAST_UPDATE_DATE
FROM (
SELECT PROCESS_ID
,TRANS_ENTITY_TYPE ENTITY_TYPE
,MIN(TRANS_ENTITY_ID) ENTITY_ID
,TRANS_ENTITY_NAME ENTITY_NAME
,MIN(COALESCE(SOURCE_LEDGER_ID,0) * 100000000 + GL_EFFECTIVE_PERIOD_NUM) ENTITY_NAME_ORDER
FROM AIF_PROCESS_PERIODS
WHERE PROCESS_ID = 300
AND PRIOR_PERIOD_FLAG = 'N'
GROUP BY PROCESS_ID
,TRANS_ENTITY_TYPE
,TRANS_ENTITY_NAME
) q
ORDER BY ENTITY_NAME_ORDER
2013-12-31 22:44:56,970 INFO [AIF]: COMM Process Periods - Insert Process Details - END
2013-12-31 22:44:57,407 DEBUG [AIF]: EBS/FS GL Balances Print Variables - Printing Variables - START
2013-12-31 22:44:57,408 DEBUG [AIF]:
p_process_id: 300
p_sql_db_type: ORACLE
p_partitionkey: 12
p_rule_id: 27
p_source_system_id: 3
p_application_id: 26
p_target_application_type: HFM
p_is_multi_currency: true
p_data_load_method: CLASSIC_VIA_EPMI
p_bal_balance_method_code: STANDARD
p_bal_ledger_group_code: SINGLE
p_bal_amount_type: MONETARY
p_prd_entity_name: JAN-13
p_prd_period_id: 135
p_prd_gl_period_name: JAN-13
p_prd_source_ledger_id: 1
p_prd_source_coa_id: 101
p_source_ledger_id: 1
p_source_coa_id: 101
p_bal_actual_flag: A
p_bal_seg_column_name: SEGMENT1
p_max_ccid_loaded_to_stg: 148137
2013-12-31 22:44:57,408 DEBUG [AIF]: EBS/FS GL Balances Print Variables - Printing Variables - END
2013-12-31 22:44:57,806 INFO [AIF]: LKM EBS/FS Extract Type - Load Audit AND Full Refresh - START
2013-12-31 22:44:57,817 DEBUG [AIF]:
SELECT p.PROCESS_ID
,br.RULE_NAME
,l.SOURCE_LEDGER_NAME
FROM AIF_GL_LOAD_AUDIT aud
,AIF_PROCESSES p
,AIF_BALANCE_RULES br
,AIF_COA_LEDGERS l
WHERE aud.SOURCE_SYSTEM_ID = 3
AND aud.SOURCE_LEDGER_ID = 1
AND aud.GL_PERIOD_ID = 135
AND aud.BALANCE_TYPE = 'A'
AND p.PROCESS_ID = aud.LAST_LOADID
AND p.STATUS = 'RUNNING'
AND p.PROCESS_ID <> 300
AND br.RULE_ID = p.RULE_ID
AND l.SOURCE_SYSTEM_ID = aud.SOURCE_SYSTEM_ID
AND l.SOURCE_LEDGER_ID = aud.SOURCE_LEDGER_ID
2013-12-31 22:44:57,826 DEBUG [AIF]:
SELECT 'Y' VALID_FLAG
FROM GL_PERIOD_STATUSES
WHERE APPLICATION_ID = 101
AND SET_OF_BOOKS_ID = 1
AND PERIOD_NAME = 'JAN-13'
AND CLOSING_STATUS IN ( 'O','C','P' )
2013-12-31 22:44:57,847 DEBUG [AIF]:
SELECT 'Y' EXISTS_FLAG
FROM GL_TRACK_DELTA_BALANCES
WHERE SET_OF_BOOKS_ID = 1
AND PROGRAM_CODE = 'FEM'
AND PERIOD_NAME = 'JAN-13'
AND ACTUAL_FLAG = 'A'
AND EXTRACT_LEVEL_CODE = 'DTL'
AND CURRENCY_TYPE_CODE = 'B'
AND ENABLED_FLAG = 'Y'
2013-12-31 22:44:57,883 DEBUG [AIF]:
SELECT MAX(DELTA_RUN_ID) MAX_DELTA_RUN_ID
FROM GL_BALANCES_DELTA
WHERE SET_OF_BOOKS_ID = 1
AND PERIOD_NAME = 'JAN-13'
AND ACTUAL_FLAG = 'A'
2013-12-31 22:44:57,898 DEBUG [AIF]:
SELECT brl.EXECUTION_MODE
,( SELECT CASE COUNT(aud.DELTA_RUN_ID) WHEN 0 THEN 'N' ELSE 'Y' END
FROM AIF_GL_LOAD_AUDIT aud
WHERE aud.SOURCE_SYSTEM_ID = 3
AND aud.SOURCE_LEDGER_ID = 1
AND aud.GL_PERIOD_ID = 135
AND aud.BALANCE_TYPE = 'A'
AND aud.LAST_LOADID <> brl.LOADID
AND COALESCE( aud.STATUS, 'SUCCESS' ) = 'SUCCESS'
) GL_LOAD_AUDIT_SUCCESS_FLAG
,( SELECT CASE COUNT(aud.DELTA_RUN_ID) WHEN 0 THEN 'N' ELSE 'Y' END
FROM AIF_GL_LOAD_AUDIT aud
WHERE aud.SOURCE_SYSTEM_ID = 3
AND aud.SOURCE_LEDGER_ID = 1
AND aud.GL_PERIOD_ID = 135
AND aud.BALANCE_TYPE = 'A'
AND aud.LAST_LOADID <> brl.LOADID
AND aud.STATUS = 'RUNNING'
) GL_LOAD_AUDIT_RUNNING_FLAG
FROM AIF_BAL_RULE_LOADS brl
WHERE brl.LOADID = 300
2013-12-31 22:44:57,904 DEBUG [AIF]:
INSERT INTO AIF_GL_LOAD_AUDIT ( LAST_LOADID
,DELTA_RUN_ID
,SOURCE_SYSTEM_ID
,SOURCE_LEDGER_ID
,GL_PERIOD_ID
,BALANCE_TYPE
,GL_EXTRACT_TYPE
,STATUS
) VALUES ( 300
,0
,3
,1
,135
,'A'
,'FULLREFRESH'
,'RUNNING'
2013-12-31 22:44:57,907 DEBUG [AIF]:
DELETE FROM AIF_EBS_GL_BALANCES_STG
WHERE SOURCE_SYSTEM_ID = 3
AND SOURCE_COA_ID = 101
AND SOURCE_LEDGER_ID = 1
AND ACTUAL_FLAG = 'A'
AND PERIOD_NAME = 'JAN-13'
2013-12-31 22:44:59,283 INFO [AIF]: LKM EBS/FS Extract Type - Load Audit AND Full Refresh - END
2013-12-31 22:45:06,507 INFO [AIF]: COMM End Process Detail - Update Process Detail - START
2013-12-31 22:45:06,514 DEBUG [AIF]:
UPDATE AIF_PROCESS_DETAILS
SET STATUS = 'SUCCESS'
,RECORDS_PROCESSED = CASE
WHEN RECORDS_PROCESSED IS NULL THEN 0
ELSE RECORDS_PROCESSED
END + 57408
,EXECUTION_END_TIME = CURRENT_TIMESTAMP
,LAST_UPDATED_BY = CASE
WHEN ('native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER' IS NULL) THEN LAST_UPDATED_BY
ELSE 'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER'
END
,LAST_UPDATE_DATE = CURRENT_TIMESTAMP
WHERE PROCESS_ID = 300
AND ENTITY_TYPE = 'PROCESS_BAL_IMP'
AND ENTITY_NAME = 'JAN-13'
2013-12-31 22:45:06,519 INFO [AIF]: COMM End Process Detail - Update Process Detail - END
2013-12-31 22:45:07,106 INFO [AIF]: EBS/FS Load Data - Load TDATASEG_T - START
2013-12-31 22:45:07,112 INFO [AIF]:
Import Data from Source for Period 'January 2013'
2013-12-31 22:45:07,115 DEBUG [AIF]:
SELECT brl.PARTITIONKEY
,brl.CATKEY
,brl.PLAN_TYPE
,CASE brl.PLAN_TYPE
WHEN 'PLAN1' THEN 1
WHEN 'PLAN2' THEN 2
WHEN 'PLAN3' THEN 3
WHEN 'PLAN4' THEN 4
WHEN 'PLAN5' THEN 5
ELSE 0
END PLAN_NUMBER
,brl.EXECUTION_MODE
,br.AMOUNT_TYPE
,br.BALANCE_SELECTION
,br.CURRENCY_CODE
,br.INCL_ZERO_BALANCE_FLAG
,br.BAL_SEG_VALUE_OPTION_CODE
,COALESCE(br.BALANCE_AMOUNT_BS, 'YTD') BALANCE_AMOUNT_BS
,COALESCE(br.BALANCE_AMOUNT_IS, 'PERIODIC') BALANCE_AMOUNT_IS
FROM AIF_BAL_RULE_LOADS brl
,AIF_TARGET_APPLICATIONS app
,AIF_BALANCE_RULES br
WHERE brl.LOADID = 300
AND app.APPLICATION_ID = brl.APPLICATION_ID
AND br.RULE_ID = brl.RULE_ID
2013-12-31 22:45:07,120 DEBUG [AIF]:
SELECT PERIODKEY
FROM TPOVPERIOD
WHERE PERIODDESC = 'January 2013'
2013-12-31 22:45:07,122 INFO [AIF]:
Import Data from Source for Ledger 'JWR Books'
2013-12-31 22:45:07,125 DEBUG [AIF]:
SELECT COA_SEGMENT_NAME
,ACCOUNT_TYPE_FLAG
,BALANCE_TYPE_FLAG
FROM AIF_COA_SEGMENTS
WHERE SOURCE_SYSTEM_ID = 3
AND SOURCE_COA_ID = '101'
AND (
ACCOUNT_TYPE_FLAG = 'Y'
OR BALANCE_TYPE_FLAG = 'Y'
2013-12-31 22:45:07,127 DEBUG [AIF]:
SELECT adim.BALANCE_COLUMN_NAME DIMNAME
,adim.DIMENSION_ID
,dim.TARGET_DIMENSION_CLASS_NAME
,(SELECT COA_SEGMENT_NAME
FROM AIF_COA_SEGMENTS cs
WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID1
) COA_SEGMENT_NAME1
,(SELECT COA_SEGMENT_NAME
FROM AIF_COA_SEGMENTS cs
WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID2
) COA_SEGMENT_NAME2
,(SELECT COA_SEGMENT_NAME
FROM AIF_COA_SEGMENTS cs
WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID3
) COA_SEGMENT_NAME3
,(SELECT COA_SEGMENT_NAME
FROM AIF_COA_SEGMENTS cs
WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID4
) COA_SEGMENT_NAME4
,(SELECT COA_SEGMENT_NAME
FROM AIF_COA_SEGMENTS cs
WHERE cs.COA_LINE_ID = tiie.IMPSOURCECOALINEID5
) COA_SEGMENT_NAME5
,(SELECT CASE mdd.ORPHAN_OPTION_CODE
WHEN 'CHILD' THEN 'N'
WHEN 'ROOT' THEN 'N'
ELSE 'Y'
END DIMENSION_FILTER_FLAG
FROM AIF_MAP_DIM_DETAILS_V mdd
,AIF_MAPPING_RULES mr
WHERE mr.PARTITIONKEY = tpp.PARTITIONKEY
AND mdd.RULE_ID = mr.RULE_ID
AND mdd.DIMENSION_ID = adim.DIMENSION_ID
) DIMENSION_FILTER_FLAG
,tiie.IMPCONCATCHAR
FROM TPOVPARTITION tpp
INNER JOIN AIF_TARGET_APPL_DIMENSIONS adim
ON adim.APPLICATION_ID = 26
INNER JOIN AIF_DIMENSIONS dim
ON dim.DIMENSION_ID = adim.DIMENSION_ID
LEFT OUTER JOIN TBHVIMPITEMERPI tiie
ON tiie.IMPGROUPKEY = tpp.PARTIMPGROUP
AND tiie.IMPFLDFIELDNAME = adim.BALANCE_COLUMN_NAME
AND tiie.IMPMAPTYPE = 'ERP'
WHERE tpp.PARTITIONKEY = 12
AND adim.BALANCE_COLUMN_NAME IS NOT NULL
ORDER BY adim.BALANCE_COLUMN_NAME
2013-12-31 22:45:07,154 DEBUG [AIF]:
INSERT INTO TDATASEG_T (
LOADID
,PARTITIONKEY
,CATKEY
,RULE_ID
,PERIODKEY
,VALID_FLAG
,CHANGESIGN
,CODE_COMBINATION_ID
,SOURCE_LEDGER_ID
,GL_PERIOD_YEAR
,GL_PERIOD_NUM
,YEAR
,PERIOD
,ATTR1
,ATTR2
,ATTR3
,ATTR4
,ATTR5
,ATTR6
,ATTR7
,ATTR8
,ATTR9
,ATTR10
,ATTR11
,ATTR12
,ATTR13
,ATTR14
,ACCOUNT
,ACCOUNTX
,ENTITY
,ENTITYX
,ICP
,ICPX
,UD1
,UD1X
,UD2
,UD2X
,UD3
,UD3X
,UD4
,UD4X
,DATAVIEW
,DATAKEY
,STAT_BALANCE_FLAG
,CURKEY
,AMOUNT_PTD
,AMOUNT_YTD
,AMOUNT
,AMOUNTX
SELECT pprd.PROCESS_ID LOADID
,12 PARTITIONKEY
,4 CATKEY
,27 RULE_ID
,pprd.PERIODKEY
,'Y' VALID_FLAG
,0 CHANGESIGN
,ccid.CODE_COMBINATION_ID
,bal.SOURCE_LEDGER_ID
,pprd.GL_PERIOD_YEAR
,pprd.GL_PERIOD_NUM
,pprd.YEARTARGET YEAR
,pprd.PERIODTARGET PERIOD
,pprd.PROCESS_ID ATTR1
,bal.SOURCE_SYSTEM_ID ATTR2
,bal.SOURCE_LEDGER_ID ATTR3
,pprd.GL_PERIOD_YEAR ATTR4
,pprd.GL_PERIOD_NAME ATTR5
,bal.ACTUAL_FLAG ATTR6
,bal.BUDGET_VERSION_ID ATTR7
,bal.ENCUMBRANCE_TYPE_ID ATTR8
,ccid.ACCOUNT_TYPE ATTR9
,NULL ATTR10
,NULL ATTR11
,NULL ATTR12
,NULL ATTR13
,NULL ATTR14
,ccid.SEGMENT4 ACCOUNT
,NULL ACCOUNTX
,ccid.SEGMENT1 ENTITY
,NULL ENTITYX
,NULL ICP
,NULL ICPX
,ccid.SEGMENT5 UD1
,NULL UD1X
,ccid.SEGMENT3 UD2
,NULL UD2X
,ccid.SEGMENT6 UD3
,NULL UD3X
,ccid.SEGMENT2 UD4
,NULL UD4X
,( CASE WHEN ccid.ACCOUNT_TYPE IN ('R','E','D','C') THEN 'Periodic' ELSE 'YTD' END ) DATAVIEW
,TDATASEG_DATAKEY_S.NEXTVAL
,'N' STAT_BALANCE_FLAG
,bal.CURRENCY_CODE CURKEY
,( CASE WHEN ccid.ACCOUNT_TYPE IN ('A','E','D') THEN 1 ELSE -1 END ) * ( bal.PERIOD_NET_DR - bal.PERIOD_NET_CR ) AMOUNT_PTD
,( CASE WHEN ccid.ACCOUNT_TYPE IN ('A','E','D') THEN 1 ELSE -1 END ) * ( bal.BEGIN_BALANCE_DR - bal.BEGIN_BALANCE_CR + bal.PERIOD_NET_DR - bal.PERIOD_NET_CR ) AMOUNT_YTD
,( CASE WHEN ccid.ACCOUNT_TYPE IN ('A','E','D') THEN 1 ELSE -1 END ) *
( CASE
WHEN ccid.ACCOUNT_TYPE IN ('R','E','D','C') THEN ( bal.PERIOD_NET_DR - bal.PERIOD_NET_CR )
ELSE ( bal.BEGIN_BALANCE_DR - bal.BEGIN_BALANCE_CR + bal.PERIOD_NET_DR - bal.PERIOD_NET_CR )
END
AMOUNT
,( CASE WHEN ccid.ACCOUNT_TYPE IN ('A','E','D') THEN 1 ELSE -1 END ) *
( CASE
WHEN ccid.ACCOUNT_TYPE IN ('R','E','D','C') THEN ( bal.PERIOD_NET_DR - bal.PERIOD_NET_CR )
ELSE ( bal.BEGIN_BALANCE_DR - bal.BEGIN_BALANCE_CR + bal.PERIOD_NET_DR - bal.PERIOD_NET_CR )
END
AMOUNTX
FROM AIF_EBS_GL_BALANCES_STG_V bal
,AIF_EBS_GL_CCID_STG ccid
,AIF_PROCESS_PERIODS pprd
WHERE bal.SOURCE_SYSTEM_ID = 3
AND bal.SOURCE_LEDGER_ID = 1
AND bal.ACTUAL_FLAG = 'A'
AND ccid.SOURCE_SYSTEM_ID = bal.SOURCE_SYSTEM_ID
AND ccid.SOURCE_COA_ID = bal.SOURCE_COA_ID
AND ccid.CODE_COMBINATION_ID = bal.CODE_COMBINATION_ID
AND pprd.PROCESS_ID = 300
AND pprd.PERIODKEY = '2013-01-01'
AND pprd.SOURCE_LEDGER_ID = bal.SOURCE_LEDGER_ID
AND pprd.GL_PERIOD_NAME = bal.PERIOD_NAME
AND (
bal.BEGIN_BALANCE_DR <> 0
OR bal.BEGIN_BALANCE_CR <> 0
OR bal.PERIOD_NET_DR <> 0
OR bal.PERIOD_NET_CR <> 0
AND bal.CURRENCY_CODE <> 'STAT'
AND bal.TRANSLATED_FLAG IS NULL
2013-12-31 22:45:09,269 INFO [AIF]: Monetary Data Rows Imported from Source: 12590
2013-12-31 22:45:09,293 DEBUG [AIF]:
INSERT INTO AIF_APPL_LOAD_AUDIT (
LOADID
,TARGET_APPLICATION_TYPE
,TARGET_APPLICATION_NAME
,PLAN_TYPE
,SOURCE_LEDGER_ID
,EPM_YEAR
,EPM_PERIOD
,SNAPSHOT_FLAG
,PARTITIONKEY
,CATKEY
,RULE_ID
,PERIODKEY
,EXPORT_TO_TARGET_FLAG
SELECT DISTINCT PROCESS_ID LOADID
,'HFM' TARGET_APPLICATION_TYPE
,'FMTEST2' TARGET_APPLICATION_NAME
,NULL PLAN_TYPE
,SOURCE_LEDGER_ID
,YEARTARGET EPM_YEAR
,PERIODTARGET EPM_PERIOD
,'Y' SNAPSHOT_FLAG
,12 PARTITIONKEY
,4 CATKEY
,27 RULE_ID
,PERIODKEY
,'N' EXPORT_TO_TARGET_FLAG
FROM AIF_PROCESS_PERIODS
WHERE PROCESS_ID = 300
AND PERIODKEY = '2013-01-01'
AND SOURCE_LEDGER_ID = 1
2013-12-31 22:45:09,297 DEBUG [AIF]:
INSERT INTO AIF_APPL_LOAD_PRD_AUDIT (
LOADID
,SOURCE_LEDGER_ID
,GL_PERIOD_ID
,DELTA_RUN_ID
,PARTITIONKEY
,CATKEY
,RULE_ID
,PERIODKEY
SELECT DISTINCT pprd.PROCESS_ID LOADID
,pprd.SOURCE_LEDGER_ID
,pprd.PERIOD_ID GL_PERIOD_ID
,(SELECT MAX(gl.DELTA_RUN_ID)
FROM AIF_GL_LOAD_AUDIT gl
WHERE gl.SOURCE_SYSTEM_ID = 3
AND gl.SOURCE_LEDGER_ID = pprd.SOURCE_LEDGER_ID
AND gl.BALANCE_TYPE = 'A'
AND gl.GL_PERIOD_ID = pprd.PERIOD_ID
) DELTA_RUN_ID
,12 PARTITIONKEY
,4 CATKEY
,27 RULE_ID
,pprd.PERIODKEY
FROM AIF_PROCESS_PERIODS pprd
WHERE pprd.PROCESS_ID = 300
AND pprd.PERIODKEY = '2013-01-01'
AND pprd.SOURCE_LEDGER_ID = 1
2013-12-31 22:45:09,302 INFO [AIF]:
Total Data Rows Imported from Source: 12590
2013-12-31 22:45:09,305 INFO [AIF]: EBS/FS Load Data - Load TDATASEG_T - END
2013-12-31 22:45:09,381 INFO [AIF]: COMM Update Data - Init DataLoadUtil - START
2013-12-31 22:45:09,385 INFO [AIF]: COMM Update Data - Init DataLoadUtil - END
2013-12-31 22:45:09,485 INFO [AIF]: COMM Update Data - Update TDATASEG_T/TDATASEGW - START
2013-12-31 22:45:09,491 DEBUG [AIF]:
DELETE FROM TDATASEG_T
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND AMOUNT = 0
2013-12-31 22:45:09,559 WARN [AIF]:
Warning: Data rows with zero balances exist
2013-12-31 22:45:09,636 INFO [AIF]: Zero Balance Data Rows Deleted: 1879
2013-12-31 22:45:09,654 DEBUG [AIF]:
SELECT DIMNAME
,CASE WHEN RULE_ID IS NULL THEN 'N' ELSE 'Y' END RULE_MAP_FLAG
,SRCKEY
,TARGKEY
,WHERECLAUSETYPE
,WHERECLAUSEVALUE
,CHANGESIGN
,SEQUENCE
,DATAKEY
,MAPPING_TYPE
FROM (
SELECT DISTINCT tdm.DIMNAME
,tdm.RULE_ID
,NULL SRCKEY
,NULL TARGKEY
,tdm.WHERECLAUSETYPE
,tdm.WHERECLAUSEVALUE
,NULL CHANGESIGN
,1 SEQUENCE
,COALESCE(tdm.SYSTEM_GENERATED_FLAG,'N') SYSTEM_GENERATED_FLAG
,NULL DATAKEY
,CASE
WHEN tdm.WHERECLAUSETYPE IS NULL THEN 1
ELSE 3
END MAPPING_TYPE
FROM TDATAMAP_T tdm
WHERE tdm.LOADID = 300
AND tdm.PARTITIONKEY = 12
AND tdm.TDATAMAPTYPE = 'ERP'
AND (tdm.RULE_ID IS NULL OR tdm.RULE_ID = 27)
AND tdm.WHERECLAUSETYPE IS NULL
UNION ALL
SELECT tdm.DIMNAME
,tdm.RULE_ID
,tdm.SRCKEY
,tdm.TARGKEY
,tdm.WHERECLAUSETYPE
,tdm.WHERECLAUSEVALUE
,tdm.CHANGESIGN
,CASE tpp.PARTSEQMAP
WHEN 0 THEN CASE
WHEN (tdm.WHERECLAUSETYPE = 'MULTIDIM') THEN 2
WHEN (tdm.WHERECLAUSETYPE = 'BETWEEN') THEN 3
WHEN (tdm.WHERECLAUSETYPE = 'LIKE') THEN 4
ELSE 0
END
ELSE tdm.SEQUENCE
END SEQUENCE
,COALESCE(tdm.SYSTEM_GENERATED_FLAG,'N') SYSTEM_GENERATED_FLAG
,tdm.DATAKEY
,CASE
WHEN tdm.WHERECLAUSETYPE IS NULL THEN 1
ELSE 3
END MAPPING_TYPE
FROM TDATAMAP_T tdm
INNER JOIN TPOVPARTITION tpp
ON tpp.PARTITIONKEY = tdm.PARTITIONKEY
WHERE tdm.LOADID = 300
AND tdm.PARTITIONKEY = 12
AND tdm.TDATAMAPTYPE = 'ERP'
AND (tdm.RULE_ID IS NULL OR tdm.RULE_ID = 27)
AND tdm.WHERECLAUSETYPE IN ('MULTIDIM','BETWEEN','LIKE')
) q
ORDER BY DIMNAME
,RULE_ID
,SEQUENCE
,SYSTEM_GENERATED_FLAG
,SRCKEY
2013-12-31 22:45:09,672 INFO [AIF]:
Processing Mappings for Column 'ACCOUNT'
2013-12-31 22:45:09,677 DEBUG [AIF]:
UPDATE TDATASEG_T
SET ACCOUNTX = ACCOUNT
,ACCOUNTR = 121
,ACCOUNTF = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '*' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND ACCOUNTX IS NULL
AND (1=1)
2013-12-31 22:45:10,044 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:10,053 INFO [AIF]:
Processing Mappings for Column 'ENTITY'
2013-12-31 22:45:10,057 DEBUG [AIF]:
UPDATE TDATASEG_T
SET ENTITYX = ENTITY
,ENTITYR = 122
,ENTITYF = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '*' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND ENTITYX IS NULL
AND (1=1)
2013-12-31 22:45:10,426 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:10,435 DEBUG [AIF]:
UPDATE TDATASEG_T
SET ENTITYX = ENTITY
,ENTITYR = 132
,ENTITYF = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '*' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND ENTITYX IS NULL
AND (1=1)
2013-12-31 22:45:10,446 INFO [AIF]: Data Rows Updated by Location Mapping 'DEFAULT' (LIKE): 0
2013-12-31 22:45:10,448 INFO [AIF]:
Processing Mappings for Column 'ICP'
2013-12-31 22:45:10,452 DEBUG [AIF]:
UPDATE TDATASEG_T
SET ICPX = '[ICP None]'
,ICPR = 130
,ICPF = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '[ICP None]' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND ICPX IS NULL
AND (1=1)
2013-12-31 22:45:10,784 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:10,798 INFO [AIF]:
Processing Mappings for Column 'UD1'
2013-12-31 22:45:10,802 DEBUG [AIF]:
UPDATE TDATASEG_T
SET UD1X = '[None]'
,UD1R = 124
,UD1F = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '[None]' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND UD1X IS NULL
AND (1=1)
2013-12-31 22:45:11,134 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:11,156 INFO [AIF]:
Processing Mappings for Column 'UD2'
2013-12-31 22:45:11,160 DEBUG [AIF]:
UPDATE TDATASEG_T
SET UD2X = '[None]'
,UD2R = 123
,UD2F = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '[None]' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND UD2X IS NULL
AND (1=1)
2013-12-31 22:45:11,517 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:11,531 INFO [AIF]:
Processing Mappings for Column 'UD3'
2013-12-31 22:45:11,535 DEBUG [AIF]:
UPDATE TDATASEG_T
SET UD3X = '[None]'
,UD3R = 125
,UD3F = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '[None]' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND UD3X IS NULL
AND (1=1)
2013-12-31 22:45:11,870 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:11,883 INFO [AIF]:
Processing Mappings for Column 'UD4'
2013-12-31 22:45:11,887 DEBUG [AIF]:
UPDATE TDATASEG_T
SET UD4X = '[None]'
,UD4R = 128
,UD4F = 3
,AMOUNTX = AMOUNTX * 1
,CHANGESIGN = CASE 1
WHEN -1 THEN CASE CHANGESIGN
WHEN 1 THEN 0
WHEN 0 THEN 1
ELSE CHANGESIGN
END
ELSE CHANGESIGN
END
,VALID_FLAG = CASE '[None]' WHEN 'IGNORE' THEN 'I' ELSE VALID_FLAG END
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND UD4X IS NULL
AND (1=1)
2013-12-31 22:45:12,192 INFO [AIF]: Data Rows Updated by Location Mapping 'Like' (LIKE): 10711
2013-12-31 22:45:12,204 DEBUG [AIF]:
UPDATE TDATASEG_T
SET ATTR14 = DATAKEY
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
2013-12-31 22:45:12,739 DEBUG [AIF]:
UPDATE TDATASEG_T
SET VALID_FLAG = 'N'
WHERE 1=1
AND (
(1=0)
OR TDATASEG_T.ACCOUNTX IS NULL
OR TDATASEG_T.ENTITYX IS NULL
OR TDATASEG_T.ICPX IS NULL
OR TDATASEG_T.UD1X IS NULL
OR TDATASEG_T.UD2X IS NULL
OR TDATASEG_T.UD3X IS NULL
OR TDATASEG_T.UD4X IS NULL
AND LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND VALID_FLAG = 'Y'
2013-12-31 22:45:12,754 INFO [AIF]:
Total Data Rows available for Export to Target: 10711
2013-12-31 22:45:12,773 INFO [AIF]: COMM Update Data - Update TDATASEG_T/TDATASEGW - END
2013-12-31 22:45:12,808 INFO [AIF]: COMM End Process Detail - Update Process Detail - START
2013-12-31 22:45:12,823 DEBUG [AIF]:
UPDATE AIF_PROCESS_DETAILS
SET STATUS = 'SUCCESS'
,RECORDS_PROCESSED = CASE
WHEN RECORDS_PROCESSED IS NULL THEN 0
ELSE RECORDS_PROCESSED
END + 10711
,EXECUTION_END_TIME = CURRENT_TIMESTAMP
,LAST_UPDATED_BY = CASE
WHEN ('native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER' IS NULL) THEN LAST_UPDATED_BY
ELSE 'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER'
END
,LAST_UPDATE_DATE = CURRENT_TIMESTAMP
WHERE PROCESS_ID = 300
AND ENTITY_TYPE = 'PROCESS_BAL_TRANS'
AND ENTITY_NAME = 'January 2013'
2013-12-31 22:45:12,829 INFO [AIF]: COMM End Process Detail - Update Process Detail - END
2013-12-31 22:45:12,987 INFO [AIF]: COMM Update YTD Amounts - Update YTD Amounts - START
2013-12-31 22:45:12,993 DEBUG [AIF]:
SELECT brl.PARTITIONKEY
,brl.CATKEY
,pprd.YEARTARGET
,pprd.PERIODTARGET
,pprd.SOURCE_LEDGER_ID
FROM AIF_BAL_RULE_LOADS brl
,AIF_PROCESS_PERIODS pprd
WHERE brl.LOADID = 300
AND pprd.PROCESS_ID = brl.LOADID
GROUP BY brl.PARTITIONKEY
,brl.CATKEY
,pprd.YEARTARGET
,pprd.PERIODTARGET
,pprd.SOURCE_LEDGER_ID
HAVING COUNT(*) > 1
2013-12-31 22:45:12,995 INFO [AIF]: COMM Update YTD Amounts - Update YTD Amounts - END
2013-12-31 22:45:13,052 INFO [AIF]: COMM Load TDATAMAPSEG/TDATASEG - Load TDATAMAPSEG/TDATASEG - START
2013-12-31 22:45:13,057 DEBUG [AIF]:
SELECT brl.PARTITIONKEY
,brl.CATKEY
,brl.EXECUTION_MODE
FROM AIF_BAL_RULE_LOADS brl
WHERE brl.LOADID = 300
2013-12-31 22:45:13,059 DEBUG [AIF]:
SELECT PERIODKEY
FROM AIF_APPL_LOAD_AUDIT
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND RULE_ID = 27
ORDER BY PERIODKEY
2013-12-31 22:45:13,061 INFO [AIF]:
Processing Data for PeriodKey '2013-01-01'
2013-12-31 22:45:13,065 DEBUG [AIF]:
DELETE FROM TDATAMAPSEG
WHERE PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
AND (
TDATAMAPTYPE = 'ERP'
OR (
TDATAMAPTYPE = 'MULTIDIM'
AND EXISTS (
SELECT 1
FROM TDATAMAPSEG parent
WHERE parent.PARTITIONKEY = TDATAMAPSEG.PARTITIONKEY
AND parent.DATAKEY = TDATAMAPSEG.TARGKEY
AND parent.CATKEY = TDATAMAPSEG.CATKEY
AND parent.PERIODKEY = TDATAMAPSEG.PERIODKEY
AND parent.TDATAMAPTYPE = 'ERP'
2013-12-31 22:45:13,074 INFO [AIF]: Number of Rows deleted from TDATAMAPSEG: 8
2013-12-31 22:45:13,077 DEBUG [AIF]:
INSERT INTO TDATAMAPSEG (
DATAKEY
,PARTITIONKEY
,CATKEY
,PERIODKEY
,DIMNAME
,SRCKEY
,SRCDESC
,TARGKEY
,WHERECLAUSETYPE
,WHERECLAUSEVALUE
,CHANGESIGN
,SEQUENCE
,VBSCRIPT
,TDATAMAPTYPE
,SYSTEM_GENERATED_FLAG
SELECT DATAKEY
,PARTITIONKEY
,4
,'2013-01-01'
,DIMNAME
,SRCKEY
,SRCDESC
,TARGKEY
,WHERECLAUSETYPE
,WHERECLAUSEVALUE
,CHANGESIGN
,SEQUENCE
,VBSCRIPT
,TDATAMAPTYPE
,SYSTEM_GENERATED_FLAG
FROM TDATAMAP_T
WHERE LOADID = 300
2013-12-31 22:45:13,081 INFO [AIF]: Number of Rows inserted into TDATAMAPSEG: 8
2013-12-31 22:45:13,083 DEBUG [AIF]:
DELETE FROM TDATASEG
WHERE LOADID < 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND RULE_ID = 27
AND PERIODKEY = '2013-01-01'
2013-12-31 22:45:15,659 INFO [AIF]: Number of Rows deleted from TDATASEG: 10711
2013-12-31 22:45:15,728 DEBUG [AIF]:
INSERT INTO TDATASEG (
DATAKEY
,PARTITIONKEY
,CATKEY
,PERIODKEY
,CURKEY
,DATAVIEW
,CALCACCTTYPE
,CHANGESIGN
,JOURNALID
,AMOUNT
,AMOUNTX
,AMOUNT_PTD
,AMOUNT_YTD
,DESC1
,DESC2
,ACCOUNT
,ACCOUNTX
,ACCOUNTR
,ACCOUNTF
,ENTITY
,ENTITYX
,ENTITYR
,ENTITYF
,ICP
,ICPX
,ICPR
,ICPF
,UD1
,UD1X
,UD1R
,UD1F
,UD2
,UD2X
,UD2R
,UD2F
,UD3
,UD3X
,UD3R
,UD3F
,UD4
,UD4X
,UD4R
,UD4F
,UD5
,UD5X
,UD5R
,UD5F
,UD6
,UD6X
,UD6R
,UD6F
,UD7
,UD7X
,UD7R
,UD7F
,UD8
,UD8X
,UD8R
,UD8F
,UD9
,UD9X
,UD9R
,UD9F
,UD10
,UD10X
,UD10R
,UD10F
,UD11
,UD11X
,UD11R
,UD11F
,UD12
,UD12X
,UD12R
,UD12F
,UD13
,UD13X
,UD13R
,UD13F
,UD14
,UD14X
,UD14R
,UD14F
,UD15
,UD15X
,UD15R
,UD15F
,UD16
,UD16X
,UD16R
,UD16F
,UD17
,UD17X
,UD17R
,UD17F
,UD18
,UD18X
,UD18R
,UD18F
,UD19
,UD19X
,UD19R
,UD19F
,UD20
,UD20X
,UD20R
,UD20F
,ATTR1
,ATTR2
,ATTR3
,ATTR4
,ATTR5
,ATTR6
,ATTR7
,ATTR8
,ATTR9
,ATTR10
,ATTR11
,ATTR12
,ATTR13
,ATTR14
,ARCHIVEID
,HASMEMOITEM
,STATICDATAKEY
,LOADID
,RULE_ID,
CODE_COMBINATION_ID
,STAT_BALANCE_FLAG
,VALID_FLAG
SELECT
DATAKEY
,PARTITIONKEY
,CATKEY
,PERIODKEY
,CURKEY
,DATAVIEW
,CALCACCTTYPE
,CHANGESIGN
,JOURNALID
,AMOUNT
,AMOUNTX
,AMOUNT_PTD
,AMOUNT_YTD
,DESC1
,DESC2
,ACCOUNT
,ACCOUNTX
,ACCOUNTR
,ACCOUNTF
,ENTITY
,ENTITYX
,ENTITYR
,ENTITYF
,ICP
,ICPX
,ICPR
,ICPF
,UD1
,UD1X
,UD1R
,UD1F
,UD2
,UD2X
,UD2R
,UD2F
,UD3
,UD3X
,UD3R
,UD3F
,UD4
,UD4X
,UD4R
,UD4F
,UD5
,UD5X
,UD5R
,UD5F
,UD6
,UD6X
,UD6R
,UD6F
,UD7
,UD7X
,UD7R
,UD7F
,UD8
,UD8X
,UD8R
,UD8F
,UD9
,UD9X
,UD9R
,UD9F
,UD10
,UD10X
,UD10R
,UD10F
,UD11
,UD11X
,UD11R
,UD11F
,UD12
,UD12X
,UD12R
,UD12F
,UD13
,UD13X
,UD13R
,UD13F
,UD14
,UD14X
,UD14R
,UD14F
,UD15
,UD15X
,UD15R
,UD15F
,UD16
,UD16X
,UD16R
,UD16F
,UD17
,UD17X
,UD17R
,UD17F
,UD18
,UD18X
,UD18R
,UD18F
,UD19
,UD19X
,UD19R
,UD19F
,UD20
,UD20X
,UD20R
,UD20F
,ATTR1
,ATTR2
,ATTR3
,ATTR4
,ATTR5
,ATTR6
,ATTR7
,ATTR8
,ATTR9
,ATTR10
,ATTR11
,ATTR12
,ATTR13
,ATTR14
,ARCHIVEID
,HASMEMOITEM
,STATICDATAKEY
,LOADID
,RULE_ID,
CODE_COMBINATION_ID
,STAT_BALANCE_FLAG
,VALID_FLAG
FROM TDATASEG_T
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
2013-12-31 22:45:16,838 INFO [AIF]: Number of Rows inserted into TDATASEG: 10711
2013-12-31 22:45:16,858 DEBUG [AIF]:
DELETE FROM TDATASEG_T
WHERE LOADID = 300
AND PARTITIONKEY = 12
AND CATKEY = 4
AND PERIODKEY = '2013-01-01'
2013-12-31 22:45:17,123 INFO [AIF]: Number of Rows deleted from TDATASEG_T: 10711
2013-12-31 22:45:17,153 DEBUG [AIF]:
DELETE FROM TDATAMAP_T
WHERE LOADID = 300
2013-12-31 22:45:17,156 INFO [AIF]: Number of Rows deleted from TDATAMAP_T: 8
2013-12-31 22:45:17,161 INFO [AIF]: COMM Load TDATAMAPSEG/TDATASEG - Load TDATAMAPSEG/TDATASEG - END
2013-12-31 22:45:17,993 DEBUG [AIF]:
SELECT CASE app.METADATA_LOAD_METHOD
WHEN 'EPMA' THEN CASE dim.TARGET_DIMENSION_CLASS_NAME
WHEN 'Generic' THEN dim.TARGET_DIMENSION_NAME
ELSE dim.TARGET_DIMENSION_CLASS_NAME
END
ELSE dim.TARGET_DIMENSION_NAME
END TARGET_DIMENSION_NAME
,adim.BALANCE_COLUMN_NAME
FROM AIF_TARGET_APPLICATIONS app
,AIF_TARGET_APPL_DIMENSIONS adim
,AIF_DIMENSIONS dim
WHERE app.APPLICATION_ID = 26
AND adim.APPLICATION_ID = app.APPLICATION_ID
AND dim.DIMENSION_ID = adim.DIMENSION_ID
AND dim.TARGET_DIMENSION_CLASS_NAME IN ('Custom1','Custom2','Custom3','Custom4','Generic')
2013-12-31 22:45:17,997 DEBUG [AIF]:
SELECT SCENARIO "Scenario"
,YEAR "Year"
,PERIOD "Period"
,DATAVIEW "View"
,DATAVALUE "Value"
,ACCOUNT "Account"
,ENTITY "Entity"
,ICP "ICP"
,UD2 "Area"
,UD1 "Tail"
,UD3 "Special"
,UD4 "Facility"
,AMOUNT "DataValue"
FROM AIF_HS_BALANCES
WHERE LOADID = 300
2013-12-31 22:45:18,000 INFO [SimpleAsyncTaskExecutor-9]: ODI Hyperion Financial Management Adapter
2013-12-31 22:45:18,002 INFO [SimpleAsyncTaskExecutor-9]: Load task initialized.
2013-12-31 22:45:18,028 INFO [AIF]: LKM COMM Load Data into HFM - Load Data to HFM - START
2013-12-31 22:45:18,031 DEBUG [AIF]:
INSERT INTO AIF_PROCESS_DETAILS (
PROCESS_ID
,ENTITY_TYPE
,ENTITY_ID
,ENTITY_NAME
,ENTITY_NAME_ORDER
,TARGET_TABLE_NAME
,EXECUTION_START_TIME
,EXECUTION_END_TIME
,RECORDS_PROCESSED
,STATUS
,LAST_UPDATED_BY
,LAST_UPDATE_DATE
) VALUES (
300
,'PROCESS_BAL_EXP_HFM'
,NULL
,'FMTEST2'
,NULL
,NULL
,CURRENT_TIMESTAMP
,NULL
,NULL
,'RUNNING'
,'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER'
,CURRENT_TIMESTAMP
2013-12-31 22:45:18,034 INFO [SimpleAsyncTaskExecutor-9]: Connecting to Financial Management application [FMTEST2] on [10.150.20.40] using user-name [admin].
2013-12-31 22:45:18,155 INFO [SimpleAsyncTaskExecutor-9]: Connected to Financial Management application.
2013-12-31 22:45:18,157 INFO [SimpleAsyncTaskExecutor-9]: HFM Version: 11.1.2.2.300.
2013-12-31 22:45:18,160 INFO [SimpleAsyncTaskExecutor-9]: Options for the Financial Management load task are:
<Options>
<Option name=LOG_FILE_NAME value=C:\Windows\TEMP\/aif_501_300.log/>
<Option name=IMPORT_MODE value=Replace/>
<Option name=CONSOLIDATE_ONLY value=false/>
<Option name=CONSOLIDATE_PARAMETERS value=""/>
<Option name=LOG_ENABLED value=true/>
<Option name=ACCUMULATE_WITHIN_FILE value=false/>
<Option name=DEBUG_ENABLED value=true/>
<Option name=CONSOLIDATE_AFTER_LOAD value=false/>
<Option name=FILE_CONTAINS_SHARE_DATA value=false/>
</Options>
2013-12-31 22:45:18,168 INFO [SimpleAsyncTaskExecutor-9]: Load Options validated.
2013-12-31 22:45:18,176 ERROR [SimpleAsyncTaskExecutor-9]: Error occurred during load process ORA-00904: "DATAVALUE": invalid identifier
com.hyperion.odi.common.ODIHAppException: ORA-00904: "DATAVALUE": invalid identifier
at com.hyperion.odi.hfm.ODIHFMAppWriter.loadData(ODIHFMAppWriter.java:216)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:175)
at org.python.core.PyObject.__call__(PyObject.java:355)
at org.python.core.PyMethod.__call__(PyMethod.java:215)
at org.python.core.PyMethod.instancemethod___call__(PyMethod.java:221)
at org.python.core.PyMethod.__call__(PyMethod.java:206)
at org.python.core.PyObject.__call__(PyObject.java:397)
at org.python.core.PyObject.__call__(PyObject.java:401)
at org.python.pycode._pyx161.f$0(<string>:98)
at org.python.pycode._pyx161.call_function(<string>)
at org.python.core.PyTableCode.call(PyTableCode.java:165)
at org.python.core.PyCode.call(PyCode.java:18)
at org.python.core.Py.runCode(Py.java:1204)
at org.python.core.Py.exec(Py.java:1248)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java:172)
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2472)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1889)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$2.doAction(StartScenRequestProcessor.java:580)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor.doProcessStartScenTask(StartScenRequestProcessor.java:513)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$StartScenTask.doExecute(StartScenRequestProcessor.java:1066)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:724)
Caused by: java.sql.SQLSyntaxErrorException: ORA-00904: "DATAVALUE": invalid identifier
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
at oracle.jdbc.driver.T4CStatement.executeForDescribe(T4CStatement.java:942)
at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1283)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1441)
at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1690)
at oracle.jdbc.driver.OracleStatementWrapper.executeQuery(OracleStatementWrapper.java:446)
at com.hyperion.odi.hfm.ODIHFMAppWriter.loadData(ODIHFMAppWriter.java:212)
... 38 more
2013-12-31 22:45:18,208 DEBUG [AIF]:
UPDATE AIF_PROCESS_DETAILS
SET STATUS = 'FAILED'
,RECORDS_PROCESSED = CASE
WHEN RECORDS_PROCESSED IS NULL THEN 0
ELSE RECORDS_PROCESSED
END + 0
,EXECUTION_END_TIME = CURRENT_TIMESTAMP
,LAST_UPDATED_BY = CASE
WHEN ('native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER' IS NULL) THEN LAST_UPDATED_BY
ELSE 'native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER'
END
,LAST_UPDATE_DATE = CURRENT_TIMESTAMP
WHERE PROCESS_ID = 300
AND ENTITY_TYPE = 'PROCESS_BAL_EXP_HFM'
AND ENTITY_NAME = 'FMTEST2'
2013-12-31 22:45:18,210 FATAL [AIF]: Error in LKM CThe issue is that you are mapping "Data Value" to amount in the Target Application import format:
SELECT SCENARIO "Scenario"
,YEAR "Year"
,PERIOD "Period"
,DATAVIEW "View"
,DATAVALUE "Value"
,ACCOUNT "Account"
,ENTITY "Entity"
,ICP "ICP"
,UD2 "Area"
,UD1 "Tail"
,UD3 "Special"
,UD4 "Facility"
,AMOUNT "DataValue"
FROM AIF_HS_BALANCES
WHERE LOADID = 300
You need to map AMOUNT to "AMOUNT" in the HFM Application. Check that the dimension mapping is correct for the class in the target application and that your import format is going to the proper target dimension(Amount). -
Error while loading application
Hi,
I'm not sure this is the right forum, but I try anyway.
I'm trying to use a 3rd party Java application Unico (just use it, I don't develop anything of that) that after working for weeks, suddenly refuses to load at startup, and returns an error like "Error while loading application" (no error code number no other hint about the problem).
The tests that did not work: 1. I installed the Unico again, 2. I created a new login and installed Unico in that login, 3. I started in safe mode (pressing shift at startup) - I always had the same message and loading aborted.
The only workaround I found is to use an external startup disk, that I fortunately had available to face cases like this: when starting the system up from that disk Unico WORKS, not only, but I can even use the same application in my internal disk that does not load otherwise.
My first conclusion is that something wrong happened to my system on the startup disk that prevents loading a Java application. The user Library seems to make no difference.
So my questions to the Java experts are:
- what in the system could suddenly block the loading of a Java application ? where should I look in the system (I can use the terminal and know something about UNIX) to fix this ? could this be caused by a permission problem ? (it looks a lot alike, but repairing permissions in Disk Utility didn't help) if so where are the Java support files stored in the Library and System Library to check and compare between the good and the bad system ?
- is there a better workaround to this problem, other than starting up from a different disk ?
Some additional info:
- the application Unico is freely provided by the Italian tax organization, so there is basically no support to use it...
- Unico requires Java 1.3.1: my system is constantly updated/upgraded and it runs the most recent release that is 1.4.0 (I guess...) and anyway worked very well till a week ago.
- since the last time the application had worked I installed two (non Apple) packages: the TomTom (GPS navigator) setup application, and new Epson printer drivers for my new printer.
- in all cases I repaired permissions and I also verified the disk with the disk utility
- Unico does not uses printers (it creates pdf files instead) and does not use USB, which in turn is used by both the Epson driver and the TomTom app.
So I cannot connect the Unico malfunctioning to this new SW except for the fact that I cannot find any other answer...
Thanks to anybody having any suggestion about
PieroI made some research: it seems to me that most (if not all) the Java machine is in the /System/Library/Framework/JavaVM.framework folder: but I found no evident difference in the file permissions between the good and the bad system (see my previous posts).
There are other locations where there are java related files: eg in Javaconfig.plist (in /System/Library/Java) that seems to name the locations for all components of the java machine. I checked some files in /usr/bin referenced in the .plist: again no difference.
Something "could" be a clue; just before the crashing point the Unico (java) program causes a message in the Console:
"[JavaAppLauncher Warning] Specifying a specific version for JVMVersion 1.3.1 is deprecated. Use the more general 1.3* instead."
This would be a clue... except that this message appears also when the program loads without problem (in the "good" system where it works). So it is more a warning.
Another clue is the message that appears in the console in the "good" system when the Unico loads correctly; and this seems really an error message (whateve it means):
"Index 1 for 'pxm#' 2062 out of range (must be between 0 and 0)
Attempted to read past end of 'pxm#'(2062) resource"
The funny thing is that when this message appears, Unico loads with no probem, while in the "bad" system it doesn't even get to this point.
So in my opinion both messages are irrilevant to identify the problem.
Or not ?
And again my main question is: what in the system could suddenly block the loading of a Java application ?
Thanks for any hint
Piero -
Sqlplus: Error while loading shared libraries: libsqlplus.so:
Hi
The Error is as follows:
sqlplus: Error while loading shared libraries: libsqlplus.so: cannot open shared object file: no such file or directory
Installed R12 with RUP2.
User Oracle already exists.
I tried to create a user appsdev as follows:
#adduser appsdev
#passwd appsdev
#cd /home
#chmod 500 appsdev
login as user appsdev/appsdev
run the env file from $ORACLE_HOME
$sqlplus
sqlplus: Error while loading shared libraries: libsqlplus.so: cannot open shared object file: no such file or directory
if run the env file and sqlplus from user ORACLE.i don't get the error.
but from the appsdev user i get the error.
what should i do to execute sqlplus successfully from appsdev user.
regards,
charanif run the env file and sqlplus from user ORACLE.i don't get the error.
but from the appsdev user i get the error.Is the "appsdev" user the owner of the application tier? If so, source the env file under %APPL_TOP% and check then.
Did you specify the dba group as the primary group for "appsdev" user? -
Awk: error while loading shared libraries: libdl.so.2: cannot open shared
I got the following error
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
hostname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.4681/Linux/resource/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
Tuxedo 9.1 base installation complete
when tried to install Tuxedo 9.1 on unbreakable Linux 5. I am trying to install Peoplesoft.
I found this error is pretty common, not necessary appear when installing Tuxedo. I am searching around and a lot of people saying to comment out the line
export LD_ASSUME_KERNEL
The problem is I don't know which in which file I need to do it. Has anyone have the encountered the similar problem before? Thanks.After reading the installation script, I figure out which is the evil file. I just post it here so if someone get into this problem in the future, he can fix it.
Here is the solution:
Assume you are at the directory where the install.sh is. Do the following:
-bash-3.1$ cd linux/sles9/base
-bash-3.1$ cp tuxedo91_32_SLES_9_x86.bin tuxedo91_32_SLES_9_x86.bin.bak
-bash-3.1$ cat tuxedo91_32_SLES_9_x86.bin.bak | sed "s/export LD_ASSUME_KERNEL/#xport LD_ASSUME_KERNEL/" >tuxedo91_32_SLES_9_x86.bin
-bash: tuxedo91_32_SLES_9_x86.bin: Permission denied
-bash-3.1$ cat tuxedo91_32_SLES_9_x86.bin.bak | sed "s/export LD_ASSUME_KERNEL/#xport LD_ASSUME_KERNEL/" >tuxedo91_32_SLES_9_x86.bin
Then run the installation script
sh install.sh and be happy as I am now!!!! -
Lsnrctl: error while loading shared libraries: libclntsh.so.9.0:
Hi
I copied across an /opt folder from a Redhat 9 server that has Oracle 9.2.0 to a Redhat AS 4. I then set the oracle variables, hoping after that I can get the database up and running. However I get this error, when trying to start the listener or sqlplus:
lsnrctl: error while loading shared libraries: libclntsh.so.9.0: cannot open shared object file: No such file or directory
Is this library part of a certain RPM? Where can I get this RPM or this lirary?
Thanks.I copied across an /opt folder from a Redhat 9server that has Oracle 9.2.0 to a Redhat AS 4.
So you are saying that you copied the whole
ORACLE_HOME to a new server?? Are you using same
username/group on new server?? Did you relink the
binaries after copying it? What is the output of ls
-l on ORACLE_HOME dir and as what user you are
running lsnrctl command??
Daljit SinghYes I copied the folder that has Oracle_Home and datafiles.
i have created the oracle user.
How do I relink the binaries?
I run it as oracle. -
Oracleoracle: error while loading shared libraries: libodm9.so: cannot open shared ob
Hi,
I'm installing Oracle 9i on IA 64, OS linux. I keep getting the following error when I run sqlplus
oracleoracle: error while loading shared libraries: libodm9.so: cannot open shared object file: No such file or directory
ERROR:
ORA-24314: service handle not initialized
the LD_LIBRARY_PATH=$ORACLE_HOME/lib
is set in the environment. After this error it prompts me for a user name?
RegardsHi Ruben
Before starting please make sure you have maintained all env for sidadm
commands may vary depending on os in case
Whenever I start SAPINST I set following before hand
TMPDIR=/usr/sap/install/SRA_CI : just a log directory
export TMPDIR
LD_LIBRARY_PATH=/usr/sap/sapmnt/SRA/exe
export LD_LIBRARY_PATH
umask 022
JAVA_HOME=/usr/sap/java
export JAVA_HOME
PATH=$/bin:$
export PATH
SAPINST_JRE_HOME=/usr/sap/java
export SAPINST_JRE_HOME
Hope this helps
success!! -
Svcadm: error while loading shared libraries: libz.so.1: cannot open shared
Ops center 12c installation last stage we are getting below error :
INFO: starting new satellite SMF services
satadm: Enable HTML redirect
satadm: Disabling application/scn/ec-server-splashpage
/opt/sun/xvmoc/bin/svcadm: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
satadm: ERROR: application/scn/ec-server-splashpage failed to stop
satadm: Starting Enterprise Controller with SMFlite...
svcadm: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
satadm: ERROR: Error enabling Enterprise Controller run-time milestone svc:/application/scn/satellite-enable:default (rc=127)
Error: starting satellite services
Command: /opt/sun/xvmoc/bin/satadm start -v -w
Exit code: 1
Output:
Please fix the problem and then try this step again.
For a full log of the failed install see the file: /var/tmp/installer.log.14112.
t. Try this step again (correct the failure before proceeding)
x. ExitHi Valentin
The copy error occurs when you try to copy the files to the main OS that has allocated the VM ?
Because another option is to get those files toward the VM across and ftp server. You could use
an ftp server installed in the main machine or in the network where you are connected o inclusive from
your mail if you have connection to internet.
Joel Perez
Oracle Ace Member
DBA Oracle
Maybe you are looking for
-
Multiple users on single computer
We're helping a church train their volunteers to use Contribute. In their small computer lab, volunteers will edit their particular directories/pages. We can easily create keys for each of them with their specific allowed directories - can multiple u
-
I originally tried to install the Acrobat 9.0 Prof but had problems with that also. It kept telling me that I needed to verify the original serial number for the upgrade, but I've never had the full acrobat on this laptop. So I decided that perhaps t
-
Hi, plz tell me about graphical-mapping. with warm regards. vikash
-
I've been having this issue with Youtube since this morning. I load a video on YouTube and it streams as usual for a few seconds, before the circle slider used to navigate in the video jumps right to the beginning and cannot be used. I can still inte
-
Photoshop using external disk as scratch disk without permission?
Hi, I'm having a problem whereby PS CS5 seems to be using my Time Machine disk ... In the scratch disks pref pane only my local HDD is enabled. But when I go to eject my Time Machine drive OS X says "Cannot eject, Photoshop is using this drive" or so