Run extenstion builder project problem not showing

i created extension in eclipse but i am not able to run it on adobe flash 2014 cc.
Not showing extension on windows menu.

delete your fcp preferences
https://discussions.apple.com/docs/DOC-2491

Similar Messages

HT4174 Not sure what I did but projects are not showing up in the video window as i skim... Event footage does but project footage has sound but the video screen is gray... Hwo do I get the vido to show in the viewer?

Not sure what I did but projects are not showing up in the video window as i skim... Event footage does but project footage has sound but the video screen is gray... How do I get the vido to show in the viewer?

So you can ping and nslookup from your ms to these agents and vice versa right? I wouldn't do a manual install, I would push the agent from the management server. You can uninstall the agent manually, or use cleanmom to get rid of them. Then
do an install from the console. When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
From Holmans post on this:
e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
The MOM Server could not execute WMI Query "(null)” on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access. If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed. We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.
3. Inspect WMI service, health, and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

Once project is finished the project should not show in Dashboard

HI All,
In my cProject my project status in completed last month.
once my project is completed ,my project should not show in cProject portal in starting page under projects dashboard.
how to make once completed project not apper in project dashboard.
Thank,
Kumar reddy.

You can create a view in the project dashboard and filter out the statuses completed or canceled. User can always create local views, if needed for all users you can create a global view, call it something like "Active Projects" and set it as default.
By the way, which version of PPM are you using?
Edited by: Lashan Wanigatunga on Aug 1, 2011 1:22 PM

I have Lightroom 3 and have installed it on my Retina iMac running Yosemite. It will not show me any of the modules..error when attempting to change modules.. and keeps asking for my serial number every time. Is it compatible?

I have Lightroom 3 and have installed it on my Retina iMac running Yosemite. It will not show me any of the modules..error when attempting to change modules.. and keeps asking for my serial number every time. Is it compatible?
David

This is a duplicate thread - see here

Flash Builder 4.6 code hinter problem - not showing some methods

Hi All,
I have a problem with FB code hinter. It does not show some methods on an object.
To be exact I created a Date object and FB code hinter does not show .toDateString method (actually I it shows only one to string method - .ToString(), although according to docs there are more)
When I use .toDateString method, code still compiles and work just fine, however method is not showing up in code hinter, which is really annoying..
Anyone had this problem? If so, please, share some wisdom how to solve this thing.
Thanks in advance.
UPDATE:
Here is some more info in my problem.
I have tried to reinstall the application, but it did not help.
So what I did was:
* first I installed FB standard edition version 4.
* I checked the code hinter and it worked. It showed .toDateString method.
* I have purchased FB standard 4.5 upgrade.
* I installed this upgrade, and boom the code hinter does not show the method...
* Next I tried to create a project with Flex 4.1 sdk and then it worked - method was there. So the problem is with 4.6 sdk apparently...sucks...

Hi, I have the same problem. I have a new FB 4.6 installation and it is my first FB installation. Do you have a solution already?

Acrobat plugin Build with SDK6 not Showing in Acrobat X and XI

I'm working on an old Plugin build for Acrobat (not reader) using SDK v6.
This plugin worked fine, upto Acobat 9. (it is only used in Windows)
Now some users tell me it is not showing in Acrobat X.
So I installed a trial verison of Acrobat XI.
After reading some threads, I removed all the references to ADM.
Recompiled it (VisualStudio 2010), and put the debug version in the PLUG-INS folder of Acrobat
But there in no Menu added...
In the General System Information, it is listed under Installed Plug-ins.
But when running in VisualStudio, none of the callbacks is hit. (this worked fine when I was using Acrobat9)
Some of my users are using the plugin in Acrobat7 so I prefer still using SDK6.
Are there any other things that could be incompatible.
What is the first Callback that Acrobat uses to talk to the Plugin.
Can Acrobat give me any info on what is wrong with my Plugin.
Johan

If the plug-in is not even loaded, chances are that something goes wrong
when the OS tries to link the plug-in to dynamic libraries. Verify that you
have all the libraries installed that are required to run the plug-in.
Karl Heinz Kremer
PDF Acrobatics Without a Net
PDF Software Development, Training and More...
[email protected]
http://www.khkonsulting.com

BI Projects Report Not showing data

Hi
I am a new to BI.I am trying to configure BI for Oracle Projects.So the problem here is couple of reports are not loading data on dashboard.
The issue is with Most of report that use data from Organization table
1.My BI is integrated with EBS.(I am wondering id HR security has anything to do with same)
2.Is there any step that should taken care while configuration?
3.Currently my log level is 3,But I am not able to see the query in Manage session.Show that I can get more information on specific table which is causing the query to return no data
Thanks in advance.

Hi,
The query is having some restrictions in the filter area. And also there are 2 conditions in the query.
I am checking the Multiprovider data with the tcode LISTCUBE. I am giving all the selections and the restrictions in the Multiprovider , some data is there in the multiprovider.
But in report its not showing any data.
Where shall I check, whetehr I need to check the MultiProvider assignment characterstics?

Flash Builder MXML editor not showing editor toolbar

My MXML editor is not showing the editor toolbar with the "Source" and "Design" buttons. I have just purchased Creative Cloud, created a new blank project and the buttons are not there as expected. Help!

Flash Builder 4.6 was the last version to feature a design mode. 4.7 discontinued it. Adobre has not updated flex in a wekk and I can't find any alternative educational materials past 4.6. if someone finds some please inform me!!

Project Spartan not Showing

Hello I just upgraded to the newest build of Windows 10 Preview and Project Spartan is not showing up in my taskbar nor my applications list. Is there something extra that has to be done in order to launch or view Project Spartan? Just as a FYI I have
tried it on 2 different computers and both computers are not showing it.

Don't just say " the newest build". Specify by build number.
Only build 10049 has Spartan. Look to bottom right corner, the build number is shown there., i.e. " Evaluation copy, Build 10049". Is that what you see ?
If it is confirmed that you do have 10049 installed, next to the Start button, there is a search box. Type Spartan in the box > does the word Spartan show up in the pop-up box ?
If yes, right click at it > click Pin to taskbar.
Does it work for you ?

Bit Locker encription Problem not showing in my control panel

i am using windows 7 64 home premium
in my control panel
Bit
Locker encription driver is not showing
please guide me how i will about how this driver will show in my control panel

BitLocker is not available in Windows 7 Home Premium, you need to be running Windows 7 Enterprise or Ultimate to be able to use BitLocker.
Blogging about Windows for IT pros at
www.theexperienceblog.com

Premiere 2014 queue, project does not show up in media encoder

When I queue a sequence in premiere 2014 and media encoder 2014 launches the sequence does not show up in the queue. I can do the same process in cc and it works.

In AME, please try disabling the option on the General tab in Preferences named "Import Sequences Natively." Then close and relaunch AME and double-check prefs to make sure the option remained disabled (we've had a few reports of cases where the setting reverted to Enabled). Now try queuing a job from PPro.
Also, please try dragging the sequence from Premiere's Project panel to AME's Queue, or to a preset in the Preset Browser.
What export format is selected? If you switch to another format, does the job get queued?

Aperture project photos not showing up in iWeb

Hi, I posted this in the iWeb board as well, but have gotten no response.
I use iWeb to create a website based around my photography and a blog I update periodically. I have been using this combination for at least two years now with no problems. By the way, the OS is SL 10.6.2, the Aperture version is 2.1.4, I use iLife '09 and all current patches and updates for each of the above is current according to Software Update.
The problem I am experiencing is with the Media Browser in iWeb. For one project only, when I click on the project in the Media Browser, no photos display in the lower half of the browser. The project in question is a new one, but other newer projects are not exhibiting this behavior. For all other projects, albums, smart albums, etc. photos appear when the project/album button is clicked. I have deleted the plist file for iWeb, restarted iWeb and Aperture, rebooted the machine (iMac Core Duo 24" late 2007), and tried every other combination I can think of.
Does anyone have any idea of why this behavior is occurring and what I can do to remedy it? Thanks in advance for any help you can give.
Rick

Have you tried regenerating the previews for that Project? Go to the project, select all the images then choose Images >> Delete Previews followed by Images >> Update Previews.
Deleting the previews first isn't strictly necessary, but it's good to start with a clean slate.
DLS

Project pictures not showing in browser

When I moved a project into a folder although the pictures are still listed in the inspector as being in the project they do not show up on the browser. How do I get them to show. I am using the vault system.

In the split view I see nothing when I select the project. When I select one of the albums below it the pictures show up in the lower line but not the upper part unless a lower one is selected.
I have done much since the controversial move so I'll have to wait till it happens again for a before & after. But these may help. This is the browser mode.

GTS Block when running SPL Address simualtion does not show blocked

When running a GTS SPL Screening for general address, transaction /SAPSLL/SPL_CHSS3; the simulation does not show a block for Transavia; however if I change the name to Transavia Network it will block. I need this to block on the name Transavia. I have changed my fuzzy logic in SPRO > IMG>SAP Global Trade Service>SAP Compliance Management>Sanctioned Party List Screening Service>Define Control Procedure for Address Comparison
In Detail Control in Keyword generated from name I have the follwoing settings:
Comaprison Procedure SPLUS
Search Term Origin Keyword generated from name
Check Object is selcted
0 Linking Operator Logical OR (at least one OR operation Satisfied)
B Relational Operator Comparison Index and Keyword from address are identical
In Minimial Similarity I have the follwoing settings:
Search Term 72%
2 Search Term Origin Basis for Comparion Parallel from Sanct Party List/Address
Originating Feature 49%
2 Basic Val No Terms Number of Terms in Each SP List or Partner Name
Allow Multiple Matches for Origin is NOT check
Edited by: Kim Blair on Jan 13, 2012 3:06 PM

Hello Jasmit and Vishal
Sorry it has taken me a long time to repsond and this is still an issue. I have been bogged down with other things that has consumed my time.
I have tried to reset the buffer but to no avail. No we are not suing TREX. We are currently on GTS 7.2. but soon to upgrade to GTS10...This is really a strange issue...I can do a check on the name David and it will block...that is a shorter name than Transavia....so I am really confused by this...again Transavia Network will block...same country...
Any guidance on this is really appreciated.

IMac running slow and windows partition not showing

I have an iMac 12.1, 2.5 ghz, i5, 4 gb ram, 500 gb hd (41 gb used) running 10.7.4. We installed windows parallel and windows 7 about three months ago. We rarely used windows and now windows doesn't work, although the icons are there. I tried to uninstall via boot camp and the partition does not show. The iMac is now running extremely slow except when running in safe mode.
How can I delete or reinstall windows and speed up the iMac?
Thank you

Open Console in Utilities & see if there are any clues or repeating messages when you try to launch Parrallels Desktop.
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitiion & use Disk Utility from there to Repair the Disk, then Permissions.

Run extenstion builder project problem not showing

Similar Messages

Maybe you are looking for