Run file vs run project

I'm using JCreator and I came across an odd anomaly. When I chose "run project" it compiles and then gives me a "no such method error", but if I chose to just "run file" it runs just fine. Any ideas why?

Beats me, but just so you know this isn't a JCreator forum.

Similar Messages

  • Recently switched from powermac to mac pro5 2x2.66GHz 6 -core xeon   running FCP 7 on OS 10.6.8  exporting qt files and rendering project files now takes longer than my old machine   looking at activity mon and % of user is aroun 6 and % of idle around 42

    recently switched from powermac to mac pro5 2x2.66GHz 6 -core xeon   running FCP 7 on OS 10.6.8  exporting qt files and rendering project files now takes longer than my old machine   looking at activity mon and % of user is aroun 6 and % of idle around 42  are all the cores being used with FCP7?

    johnnyapplesod wrote:
    exporting qt files and rendering project files now takes longer than my old machine
    It's because the PowerMac G5 had HUGE bandwidth with a fat BUS on each processsor so they could run hard, hot and heavy.
    It's not so with the Intel processors which are multi-core and share a common bus thus bottleneck.
    The newer Intel processors can do more work on the CPU, but when it comes to in/out they are s-l-o-w.
    I've had a wickedly fast dual processor (not dual core) G5, RAID 0 pair of 10,000 RPM drives as boot and a fast video card, I could do a lot very very fast.
    You'll likely have to upgrade to Final Cut X to get more cores utilized, prepare to cry a little bit, Apple is working on the features they stripped out of it to make amends to pro users who complained loudly. (all over TV too)
    http://www.loopinsight.com/2011/09/20/apple-releases-major-update-to-final-cut-p ro-x-release-demo-version/

  • Error running Execution plan for 'Project Analytics in PeopleSoft 9.0 '

    Hi ,
    I am running execution plan for Projects Peoplesoft 9.0 (BI Apps version 7.9.6)
    The issue is the file type data source went thru the database (data warehouse)
    the tasks that were completed SUCCESS were from the File source only from (SrcFiles).
    error as below.
    ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_PSFT_90_Adaptor:SDE_PSFT_ExchangeRateDimension_Full:(Source : FULL Target : FULL)
    MESSAGE:::
    Irrecoverable Error
    Error while contacting Informatica server for getting workflow status for SDE_PSFT_ExchangeRateDimension_Full
    Error Code = 36331:Unknown reason for error code 36331
    Pmcmd output :
    one more info,if this helps
    values defined in the Parameters of the execution plan.
    1     DATASOURCE     ,DBConnection_OLAP     is 'DataWarehouse'
    1 DATASOURCE     ,DBConnection_OLTP     is 'PSFT_9_0_FINSCM'
    1     DATASOURCE     ,FlatFileConnection     is 'PSFT_9_0_FlatFile'
    The 'Relational Connection' In Informatica Repository Manager is currently pointing to only 'PSFT_9_0_FINSCM'
    & 'DataWarehouse'
    Please let me know what is wrong?
    Regards,
    JK

    Hi ,
    I created the PSFT connection in 'Applicaiton connection' of Repository manager.
    Also the Informatica server's tnsnames.ora should have entry for the source( PSFT database) and that of the datawarehouse.
    thanks,
    JK

  • Modifying property file at run time

    Hi all..
    I have been using properties file for handling few configurations in my project.
    whenever i need a change in the file, i had to change it in corresponding file, create a jar file and then introspect it into project and then publish the project.
    Is there any other way of achieving it.... can we modify the property file at run time just like we do for JSP pages...
    Or any other better way of doing this.. pls suggest..
    (am using 10g OBPM)
    Have a nice time...
    Regds,
    Viswanath

    Sharma,
    write a java class that reads a property file from the external path. make the jar file non-versionable in case you need to update that later. if you are on J2ee container all you need to do it drop the file @ domain root and u shd be good to go.
    sample code I am doing this for log4j.properties and application propertied.
    public class BPMLoggerUtil {
         // Initializing the default Logger //
         private static Logger logger = null;
         private static final String DEFAULT_PATH = "resources/log4j.properties";
         private static HashMap map = new HashMap();
         * This is the init method
         * @param propertyPath
         public static void init(String propertyPath){
              try {
                   if((logger = (Logger) map.get(propertyPath)) == null){
                        Properties properties = new Properties();
                        properties.load(LoggerUtil.class.getClassLoader().getResourceAsStream(propertyPath));
                        PropertyConfigurator.configure(properties);
                        logger = Logger.getLogger(PropertiesHelper.getProperty("resources.test", "AppName"));
                        map.put(propertyPath, logger);
              } catch(Exception ex) {
                   ex.printStackTrace();
         }

  • Convert standard video files in to flv file at run time

    Hello All
    How can we convert standard video files in to flv file at run
    time like
    you tube and
    Google Video is there any
    script or tool to do this. This is urgent.
    I have one project in this project client requiring function
    like whatever standard video file he upload, it will be play in
    .flv formate
    Any help is appreciated
    Naved Ansari

    I think you need the Macromedia Flash Media Server to be able
    to do what you are asking. Flash 8 can with a Flash Video Encoder
    but it does not do it on the fly. There maybe other 3rd party
    servers that you can sign-up that allow you do this but if you are
    looking for your own solution you will need the FMS 2.0.
    Tim

  • Top half of video is missing on imported WMV files. Running  CS3 & Win XP Professional

    Top half of video is missing on imported .WMV  files. I'm running CS3 Adobe Premier Pro with Win XP Professional OS
    Hi all,
       I just installed my Adobe Premier Pro CS3 for the very first time. I then IMPORTED a WMV file into the Project Frame and  then Dragged & Dropped it into the Time Line. All the windows (or Frames) Project Frame, Source Frame and the mini-Project Frame show this video with the top half missing. I’m running Win XP Professional with the latest Service Packs installed.
    Please Help.
    Thanks
    Derek

    After Searching the net for a while here, I found a solution to the "Half Screen" problem!
    The half screen video problems seen while trying to play WMV files in my CS3 Adobe Premiere Pro program seems to have been due to a recent Windows software Security update made to it’s Windows Media Player programming. As soon as I removed that update, my WMV files now show normally within Adobe Premier Pro.
    If you wish to uninstall this Windows Patch / Security Update on Win XP Machines:
    No#1 Prior to removing/un-installing the file, shut off "Windows Automatic Updates" and set update preferences to manual. Thus in the future you can select which Updates you want to instal (and which one not to instal)  *remember to ignore the KB2834904 update in the future! That is at least until Widows fixes this Security Update / Patch.
    A) Go to "Add/Remove Programs" in Control Panel
    B) In the Add/Remove Programs, check the "Show Updates" box located at the top of that window
    C) Scroll down to "Windows XP Software Updates" and within that section, scroll down to "Security Update for Windows Media Player" KB2834904 (mine was dated 7-10-2013)
    D) Click on the REMOVE button and re-start your system.
    If using Win 7 Operating System: to remove this Patch / Security Update the file to remove is: KB2803821 - In Windows 7, go to "Add/Remove Programs" in Control Panel, click on the "View installed updates" link in the left sidebar, search for KB 2803821 and click REMOVE.
    Good luck everyone!
    Derek

  • Running a Data cleansing project through ODI

    Hello everyone,
    I'm trying to run a data cleansing project in my odi package, i already exported the project and when i try to run the task in ODI operator looks fine but nothing happens to my output file in Data quality.
    All the configurations seems to be ok.
    Anybody can help?
    thanks,
    Questbr

    Hi Balaji,
    R u able to run that ODQ project independently ?
    Reagrds,
    Rathish A M

  • How Can I Run A SQLJ Normal Project In SAP NWDS

    I have a question about SQLJ in SAP NWDS.
    1.I created a java dictionary project,and then create the table , then depoly it.it's ok.
    2.I created a java normal project including the above java dictionary project.
    3.I used the SQLJ tech in the java normal project,exporting the opensqllib.jar,sqljapi.jar,sqljc.jar,sqljimpl.jar.
    4.I coded the normal project,and export the project .jar,everything is ok.
    <b>5.But when i runed the project in NWDS,the error appeared:java.lang.NoClassDefFoundError: com/sap/sql/log/OpenSQLException
         at com.ezkj.deom.sqlj.MainApp.main(MainApp.java:21)
    Exception in thread "main"</b>
    How Can I Run A SQLJ Normal Project In SAP NWDS?
    PLS Help me and don't let me alone!

    Tony,
    Why not try to import your SQLJ project in SAP NWDS. Add all the jars mentioned to the project path both for compile time as well as runtime. Now try running he project. Once you are able to bypass java.lang.NoClassDefFoundError, you will get other errors related to SQL statements. These Oracle SQL statements needs to be converted to OpenSQL format.
    Chill out!!!
    Sukanta Rudra
    Note: If helpful, plz donate some points.

  • Please I can not get a .jar file to run on XP SP3 start/run/cmd/

    I can not get a .jar file to run on XP SP3 start/run/cmd/
    Please help if can figure this out. I'm convinced it is a Windows XP SP3 problem from searching on google and seeing other ppl on XP SP3 with same problem (but no working solution for myself). I'll try to be complete-listing all I've done.
    I had installed: Java SE Runtime Environment v6u14 for Windows Multi-language
    I had checked here it was working properly: http://www.java.com/en/download/manual.jsp
    I'm trying to run this jar file (soht-client-0.6.2.jar):
    http://prdownloads.sourceforge.net/telnetoverhttp/soht-java-client-0.6.2.zip?download
    http://www.ericdaugherty.com/dev/soht/javaclient.html < this is the information for the program.
    (yes the file can be executed and should open the program's window
    I wanted to post screenshot of it but friend that it's working for isn't here)
    _(Please find log of all cmds I did in this post here: http://pastebin.com/f792983df )_
    _I have extracted +'all' the files to: C:\062\+_ (I have tried using other directories, same problem)
    ++I then start/open/run/cmd+
    then I: cd C:\062\+
    then I try various commands - all+ of these do absolutely nothing- meaning no errors, no reply, no window opens, nothing except enters that directoy again:
    java -jar soht-client-0.6.2.jar
    java -jar -client soht-client-0.6.2.jar
    java -client -jar soht-client-0.6.2.jar
    java -jar soht-client-0.6.2.jar soht.properties
    soht-client-0.6.2.jar
    So I try this cmd: java soht-client-0.6.2.jar
    Reply:
    C:\062>java soht-client-0.6.2.jar
    Exception in thread "main" java.lang.NoClassDefFoundError: soht-client-0/6/2/jar
    Caused by: java.lang.ClassNotFoundException: soht-client-0.6.2.jar
    at java.net.URLClassLoader$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClassInternal(Unknown Source)
    Could not find the main class: soht-client-0.6.2.jar. Program will exit.
    I try this cmd:
    java -jar soht-client-0.6.2.jar -client
    Reply:
    C:\062>java -jar soht-client-0.6.2.jar -client
    Unable to load configuration file: -client - java.io.FileNotFoundException: -cli
    ent (The system cannot find the file specified)
    SOHT Java Client
    The SOHT Java Client requires a properties file. Either start
    the application in the same directory as the soht.properties
    file, or specify the file name on the command line:
    java -jar soht-cleint-<version>.jar c:\soht.properties
    So then I do these cmds which produce the exact same error/reply just above; Unable to load..:
    j_ava -jar soht-client-0.6.2.jar -client soht.properties_
    java -jar soht-client-0.6.2.jar -client C:\062\soht.properties
    So then I copy soht.properties to C root and do:
    java -jar soht-client-0.6.2.jar -client C:\soht.properties <same error as above
    Then from other information I have read I right click on the .jar file, select open with Always open with:
    _"C:\Program Files\Java\jre6\bin\javaw.exe"_
    Try again.. same problem.
    Then I do cmd:
    _"C:\Program Files\Java\jre6\bin\javaw.exe" -jar "C:\062\soht-client-0.6.2.jar"_
    does nothing, retry the other commands same thing (either nothing or those same replies)
    Then I read (http://forums.sun.com/thread.jspa?threadID=5384879) someone had the same problem as I and they solved it by uninstalling all Java/reboot/ then install JDK 6 Update 14 with NetBeans 6.5.1 start NetBeans and then it worked for them.
    So I unistalled all Java, rebooted and gave the cmd another try (before re-installing), now a new error, of course:
    C:\062>java -jar soht-client-0.6.2.jar
    'java' is not recognized as an internal or external command, operable program or batch file.
    Then I install  Java SE and NetBeans Cobundle (JDK 6u14 and NB 6.5.1) Final Release/ reboot/ open Netbeans/
    go to test java page; all is good, run cmds again -and still nothing..
    C:\062>java -version
    java version "1.6.0_14"
    Java(TM) SE Runtime Environment (build 1.6.0_14-b08)
    Java HotSpot(TM) Client VM (build 14.0-b16, mixed mode, sharing)
    I reassociate program with: C:\Program Files\Java\jre1.6.007\bin\javaw.exe_
    same thing.. nothing
    Thank you very much for your time :D_
    PS. My computer has been newly reformatted so needing another reformat I'm sure is not the solution.

    Thank you very much for your replies Taggert_77 & swmtgoet_x :D
    Taggert77_: I have never used NetBeans. I only installed it in the bundle as I had read on another post that somehow installing the bundle magically helped another user with the same problem (he didn't know why it worked after that either).
    Before XP SP3 I was able to execute .jar file through cmd prompt. Now I am not.
    This file is executable, grab it and you will see. Here is a screen shot (program in front is FlashFXP, behind is the cmd prompt and what should happen):http://www.freeimagehosting.net/uploads/53273b4ddf.jpg
    swmtgoetx_: I only did the other cmd's to try to make it spit out something, anything lol :D
    The proper cmd is simply: java -jar soht-client-0.6.2.jar
    I did give your cmd a try, and it produced nothing :( (just like the other correct cmds)
    java -client -jar soht-client-0.6.2.jar soht.properties
    Thank you again...the mystery remains
    PS. If you do a search for this you'll find an amazing amount of XP SP3 users with the same problem and no solution posted that I could find except one chap that did the unistall install order that I did above).

  • I downloaded 4.0 when prompted, but it did not open upon completion and now shortcut does not work and cannot find file to run 4.0 in the firefox folder. Tried restarts and reinstalling 3.6 which now also won't work for me. Ideas?

    I downloaded 4.0 when prompted yesterday. Seemed to download normally but did not automatically start following download even though that option was checked. The shortcut now is broken and efforts to fix it fail because the file cannot be found. Checked the firefox folder and do not see a file to run firefox. Tried restarting twice with no luck. Then tried multiple times to reinstall 4.0 with no success. Then tried uninstalling and reinstalling 3.6 with same result.

    OK. Got it figured out. Disabled my virus scanning software and the download worked perfectly. Should have thought of that before now.

  • How can I change the report file name depending on which seq file is run in the main seq?

    I'm using TestStand 3.0.
    I have a main sequence file with a menu option to select one of several sequence files to run.
    How can I get TestStand to change report file name to the selected sequence file rather than the main sequence file name?
    Thanks
    Harminder

    Hi Harminder
    Try RunState.Root.Locals.ReportFilePath = "PathToMyFile.xxx"
    regards
    Juergen
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

  • How do I get a jar file to run directly?

    I got it to work, as in the jar file runs fine from the command thing. However, I tried getting an html file to run it, but it just wasn't working.
    This may be because I only had it incorporate the applet, and there ARE other classes, but I really don't know any html and I wouldn't know how to include those. Also, I don't know if it's an issue, but I don't think it's very plausible to have the applet both display things (my program has a GUI of sorts) and have the main method at the same time, given my program structure.
    What can I do? Are there other ways besides creating an html document to run an applet? Is there a way I could include my other classes if that's the problem? I'd really like for it to be able to run in an internet browser- otherwise, my program probably won't reach as many people.

    I got it to work, as in the jar file runs fine from
    the command thing. However, I tried getting an html
    file to run it, but it just wasn't working. To run a class with a main method you just use JRE. To run an applet you should use a browser with a Java plugin or the AppletViewer from JDK. For more info see this: http://java.sun.com/applets/jdk/1.4/index.html
    This may be because I only had it incorporate the
    applet, and there ARE other classes, but I really
    don't know any html and I wouldn't know how to
    include those. See the above link for some samples.
    Also, I don't know if it's an issue,
    but I don't think it's very plausible to have the
    applet both display things (my program has a GUI of
    sorts) and have the main method at the same time,
    given my program structure.If your applet has a main method, the browser will just silently ignore it, so you don't have to worry.
    What can I do? Are there other ways besides creating
    an html document to run an applet? Is there a way I
    could include my other classes if that's the problem?
    I'd really like for it to be able to run in an
    internet browser- otherwise, my program probably
    won't reach as many people.To run a program, not an applet, you can also use webstart: http://java.sun.com/products/javawebstart.

  • Payment Run File Destination II

    Hi.
    This is in Relation to Thread "Payment Run File Destination", it is a bit unclear for me still how to make in the selection variant in F110 the fiel PAR_UNIX available for entry. It is appearing grey outed in selection screen 1000 so I can't change the configuration of this variant. How can I change PAR_UNIX?
    Thanks
    Mario

    Hi Mario,
    the parameter PAR_UNIX is only available if a file can be created. Please check it for example with RFFOUS_T. It should be possible to change the parameter in this print program.
    Best regards,
    Reiner

  • Batch/Powershell file wont run via Task Scheduler

    Hello,
    I'm having trouble getting my Powershell file to run from Task Schedule during logoff. In short, I'm trying to upload my NTUSER.DAT (roaming profile) to my profiles folder on the file server. Dynamic VLAN switching does not support roaming profiles thus
    I have to use a script to solve this issue.
    My powershell script is as follows:
    start-sleep -s 15
    Set-Content -Path "C:\Temp\log.txt" -Value "Hello World"
    $FileServer = 10.10.5.5
    $FQDN = "$Env:UserDomain"
    $User = Get-WmiObject -Class Win32_NetworkLoginProfile | Sort-Object -Property LastLogon -Descending | Select-Object -Property * -First 1 | Where-Object {$_.LastLogon -match "(\d{14})"} | Foreach-Object { New-Object PSObject -Property @{ Name=$_.Name.TrimStart("$FQDN\") }} | Select -ExpandProperty Name
    copy-item -path C:\Users\$User\NTUSER.DAT -destination \\$FileServer\Profiles$\$user.V2\ -force
    copy-item -path C:\Users\$User\NTUSER.DAT -destination \\$FileServer\Profiles$\$user.V3\ -force
    I have a task schedule to run as Domain Admin when event ID 4647 occurs (logoff). It is set to run with the Highest Privileges checked, also I have enabled to run weather the user is logged in or no. The Domain Admin account also has access to ever file,
    both at source and destination. Set-ExecutionPolicy is set to unrestricted. The way I call the powershell script in Task Scheduler is:
    Action: Start a program
    Program/Script: C:\temp\launch.bat
    The launch.bat contains the following:
    Powershell.exe -executionpolicy unrestricted -File "CALL C:\temp\powershell.ps1"
    The task is triggered each time when the user logs off, I have confirmed this in the logs. But the NTUSER.DAT file fails to copy over to the network, in fact the log.txt file isn't even generated. I have confirmed my code to work, it's just the task scheduler
    part calling the code where I think it fails.
    Can you guys point me in the right direction here? I know I'm close, but not sure what I'm missing. 

    Jrv,
    Yes in my testing the task schedule is unreliable, I don't have any info on how long the profile is locked, thus I can't copy the profile to the server when the OS still has it locked.
    What do you propose I change my vlan configuration to?
    Thanks.
    What you are trying to do cannot be done.  That is why it is not being done.  If you set up roaming profiles and redirected folders this would happen automatically.  It would also happen very quickly.  THat is because Windows posts cahnges
    to teh roamed image as they happen.  Only changes are copied. Items in teh registry which are only valid during logon (Dynamic Entries) are nver copied so updates that are not needed are not posted.  It is these updates thaat can keep the registry
    locked for a very long time.
    If you scan your network you will likely find hives thaat are loaded with no one logged in.  WIndows 7 and later have a utility that forces and unload after a few minutes.  It posts the reson for the forced unload to the event log.
    As for the VLAN it is likely not configured correctly.  THe profile must be on a server that is available on the same net ID as the PC.  YOu may also have to allow the switch to suspend if you are using per-user conenctions.  Contact the VLAN
    vendor and tell them about issues with Roamed profiles.  THey will walk you through the setup.  THe most common issue is thaat the switch specifies 1Gb and the server is set to 100Mb and the switch is not set to match the speed.  THisis a simplpe
    configuration error done by a tech who does not have much experience with VLANs.  THey tend to think that setting everything to 1Gb or some other maximum will work but it won't.  It can also be caused by a files server with a 1Gb card that is a pront
    spooler spooling to a 100 or 10Mb older printer. This disrupts the card and the VLAN cannot attach to it until the spooler is dona nd the card can switch.  It can also be caused by a bad card or a bad switch.
    Then VLAN vendors techs are usually very good at troubleshooting this kind of issue.  Remote VLAN logging and diagnostics can also pick out the issue.
    ¯\_(ツ)_/¯

  • I am unable to open PDF files or run adobe flash when its needed I have downloaded it several times and tried updating it.

    I am unable to open PDF files or run adobe flash when its needed I have downloaded it several times and tried updating it. NEED HELP

    Adobe Acrobat NPAPI Plug-in, Version 11.0.04
    Adobe® Acrobat® Plug-in for Web Browsers, Version 11.0.04 — from file “AdobePDFViewerNPAPI.plugin”.
    application/pdf
    Acrobat Portable Document Format
    pdf
    application/vnd.adobe.pdf
    Acrobat Portable Document Format (Interim)
    pdf
    application/vnd.adobe.pdfxml
    Acrobat XML Portable Document Format
    pdfxml
    application/vnd.adobe.x-mars
    Acrobat XML Portable Document Format (Interim)
    mars
    application/vnd.adobe.xdp+xml
    XML Data Package
    xdp
    application/vnd.adobe.xfd+xml
    FormFlow99 Data File
    xfd
    application/vnd.adobe.xfdf
    Acrobat Forms Data Format in XML
    xfdf
    application/vnd.fdf
    Acrobat Forms Data Format
    fdf
    doubleTwist Web Plugin
    doubleTwist Web Plugin — from file “doubleTwistWebPlugin.bundle”.
    application/x-vnd-doubletwist
    doubleTwist Web Plugin
    Java Applet Plug-in
    Displays Java applet content, or a placeholder if Java is not installed. — from file “JavaAppletPlugin.plugin”.
    application/x-java-applet
    Basic Java Applets
    javaapplet
    application/x-java-applet;deploy=10.25.2
    Java applet
    application/x-java-applet;javafx=2.2.25
    Java applet
    application/x-java-applet;jpi-version=1.7.0_25
    Java applet
    application/x-java-applet;version=1.1
    Java applet
    application/x-java-applet;version=1.1.1
    Java applet
    application/x-java-applet;version=1.1.2
    Java applet
    application/x-java-applet;version=1.1.3
    Java applet
    application/x-java-applet;version=1.2
    Java applet
    application/x-java-applet;version=1.2.1
    Java applet
    application/x-java-applet;version=1.2.2
    Java applet
    application/x-java-applet;version=1.3
    Java applet
    application/x-java-applet;version=1.3.1
    Java applet
    application/x-java-applet;version=1.4
    Java applet
    application/x-java-applet;version=1.4.1
    Java applet
    application/x-java-applet;version=1.4.2
    Java applet
    application/x-java-applet;version=1.5
    Java applet
    application/x-java-applet;version=1.6
    Java applet
    application/x-java-applet;version=1.7
    Java applet
    application/x-java-vm
    Java applet
    application/x-java-vm-npruntime
    Java applet
    QuickTime Plug-in 7.7.1
    The QuickTime Plugin allows you to view a wide variety of multimedia content in web pages. For more information, visit the QuickTime Web site. — from file “QuickTime Plugin.plugin”.
    application/sdp
    SDP stream descriptor
    sdp
    application/x-mpeg
    AMC media
    amc
    application/x-rtsp
    RTSP stream descriptor
    rtsp,rts
    application/x-sdp
    SDP stream descriptor
    sdp
    audio/3gpp
    3GPP media
    3gp,3gpp
    audio/3gpp2
    3GPP2 media
    3g2,3gp2
    audio/aac
    AAC audio
    aac,adts
    audio/ac3
    AC3 audio
    ac3
    audio/aiff
    AIFF audio
    aiff,aif,aifc,cdda
    audio/amr
    AMR audio
    amr
    audio/basic
    uLaw/AU audio
    au,snd,ulw
    audio/mid
    MIDI
    mid,midi,smf,kar
    audio/midi
    MIDI
    mid,midi,smf,kar
    audio/mp3
    MP3 audio
    mp3,swa
    audio/mp4
    MPEG-4 media
    mp4
    audio/mpeg
    MPEG audio
    mpeg,mpg,m1s,m1a,mp2,mpm,mpa,m2a,mp3,swa
    audio/mpeg3
    MP3 audio
    mp3,swa
    audio/vnd.qcelp
    QUALCOMM PureVoice audio
    qcp,qcp
    audio/wav
    WAVE audio
    wav,bwf
    audio/x-aac
    AAC audio
    aac,adts
    audio/x-ac3
    AC3 audio
    ac3
    audio/x-aiff
    AIFF audio
    aiff,aif,aifc,cdda
    audio/x-caf
    CAF audio
    caf
    audio/x-gsm
    GSM audio
    gsm
    audio/x-m4a
    AAC audio
    m4a
    audio/x-m4b
    AAC audio book
    m4b
    audio/x-m4p
    AAC audio (protected)
    m4p
    audio/x-midi
    MIDI
    mid,midi,smf,kar
    audio/x-mp3
    MP3 audio
    mp3,swa
    audio/x-mpeg
    MPEG audio
    mpeg,mpg,m1s,m1a,mp2,mpm,mpa,m2a,mp3,swa
    audio/x-mpeg3
    MP3 audio
    mp3,swa
    audio/x-wav
    WAVE audio
    wav,bwf
    image/jp2
    JPEG2000 image
    jp2
    image/jpeg2000
    JPEG2000 image
    jp2
    image/jpeg2000-image
    JPEG2000 image
    jp2
    image/pict
    PICT image
    pict,pic,pct
    image/png
    PNG image
    png
    image/tiff
    TIFF image
    tif,tiff
    image/x-bmp
    BMP image
    bmp,dib
    image/x-jpeg2000-image
    JPEG2000 image
    jp2
    image/x-macpaint
    MacPaint image
    pntg,pnt,mac
    image/x-pict
    PICT image
    pict,pic,pct
    image/x-png
    PNG image
    png
    image/x-quicktime
    QuickTime image
    qtif,qti
    image/x-sgi
    SGI image
    sgi,rgb
    image/x-targa
    TGA image
    targa,tga
    image/x-tiff
    TIFF image
    tif,tiff
    video/3gpp
    3GPP media
    3gp,3gpp
    video/3gpp2
    3GPP2 media
    3g2,3gp2
    video/avi
    Video For Windows (AVI)
    avi,vfw
    video/flc
    AutoDesk Animator (FLC)
    flc,fli,cel
    video/mp4
    MPEG-4 media
    mp4
    video/mpeg
    MPEG media
    mpeg,mpg,m1s,m1v,m1a,m75,m15,mp2,mpm,mpv,mpa
    video/msvideo
    Video For Windows (AVI)
    avi,vfw
    video/quicktime
    QuickTime Movie
    mov,qt,mqv
    video/sd-video
    SD video
    sdv
    video/x-m4v
    Video (protected)
    m4v
    video/x-mpeg
    MPEG media
    mpeg,mpg,m1s,m1v,m1a,m75,m15,mp2,mpm,mpv,mpa
    video/x-msvideo
    Video For Windows (AVI)
    avi,vfw
    SharePoint Browser Plug-in
    Microsoft Office for Mac SharePoint Browser Plug-in — from file “SharePointBrowserPlugin.plugin”.
    application/x-sharepoint
    Microsoft Office for Mac SharePoint Browser Plug-in
    Shockwave Flash
    Shockwave Flash 11.9 r900 — from file “Flash Player.plugin”.
    application/futuresplash
    FutureSplash Player
    spl
    application/x-shockwave-flash
    Shockwave Flash
    swf
    Silverlight Plug-In
    5.1.20913.0 — from file “Silverlight.plugin”.
    application/x-silverlight

Maybe you are looking for