Run Form to test just disappears

Hi,
I have been developing (with no probs) on Form Builder 9i, I have since found that the customer this is for requires it to be backwardly compatible with Forms 6i.
I did try to put 6i on the same machine as 9i, I had major tns probs so gave up, if anyone has done this and can help then that would be great.
This isn't the actual problem, I have since installed 6i alone on a different machine and for a quick test to see if it had worked created a form with a text label, nothing special. I then tried to run this both as a client/server and web, the relevant program pops up quickly then disappears and thats it.
Does anyone have any ideas what is going on?
Thanks in advance

I'm not sure what your mean by "a text label".
A Form has to have at least one navigable item. If your item is just a display item or boilerplate text, Forms can't navigate to it which would cause the Form to crash. This would match the phenomenon you describe.
Cheers, APC

Similar Messages

Oracle9i Forms - Can't Run form

I am trying out the new Oracle9i Forms (Release 2 - part of iDS 9.2.0) on a test machine running on Oracle9i Release 2 (9.2.0) database. I did not install the Oracle9i Application Server since the documentation says that you can run forms for testing purposes without AS. After I compiled a form, It tried running a form but got error "FRM-10142 - HTTP listner not running on port 8888... " The HTTP server is running as part of the Oracle9i Database and listens to port 7778 for HTTP and 4443 for https. Is there a configuration file or parameter that I need to change?
Thanks,
T.J.

Jacob/Robin:
Thanks for your help....starting the OC4J containers did the trick! I was able to see the form within a web brower using the default port 8888. I am going to stick to this configuration until I upgrade my server since the new Oracle9i Application Server requires a lot of power (not to mention takes alot of resources!).
Thanks again for your help!
T.J.

Firefox just disappears, my HD lights are running, Firefox comes back in 10-15 seconds. Sick of it doing this.

I am on Firefox 19. The previous versions have also had this problem. Firefox loads fine, but while on a webpage it just disappears from my screen, I see my HD light running, and Firefox reappears about 15 seconds later. This is very annoying. I can be in the middle of something important and it will do it. Starting to piss me off. I see this has been a common problem with Firefox since last year.

Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

Can Test Custom Jars with 6i Run Form - Client/Server?

I want to test custom Jar files with Forms 6i from my desktop, but I cannot get the Run Form->Web to work. Is it possible for the run time to load the just jars for PJC when you do Run Form -> Client/Server? So far, when I have done this, it does not execute any PJC. Any ideas, tips?
Thanks,
Kurz

Hi Kurz
Any ideas, tips?pls have a look
http://www.dulcian.com/papers/ODTUG/2004/ODTUG%202004_Balcu1_JavaBean.htm
http://www.oracle.com/technology/sample_code/products/forms/extracted/getclientinfo/readme.html
http://www.scribd.com/doc/1027764/Forms-6i-Deploying-Forms-Applications-to-the-Web-with-Oracle-Forms-Server
Hope it helps u
Regards,
Abdetu...

I have installed Creative Cloud Desktop but it fails to load. The icon shows up in the bar at the top right but then it just disappears. I am running Yosemite on a MacBook Pro.

I downloaded and installed Creative Cloud Installer and installed the Creative Cloud desktop on my MacBook Pro running Yosemite. The Creative Cloud desktop tries to install when the system starts and the icon actually shows in the top bar briefly and then disappears shortly after it shows up so it is obviously failing to load. I have tried multiple times to no avail.

do you mean in my system library? or where can I find it?
Am 05.03.2015 um 23:55 schrieb Jeff A Wright <[email protected]>:
I have installed Creative Cloud Desktop but it fails to load. The icon shows up in the bar at the top right but then it just disappears. I am running Yosemite on a MacBook Pro.
created by Jeff A Wright <https://forums.adobe.com/people/JeffAWright> in Downloading, Installing, Setting Up - View the full discussion <https://forums.adobe.com/message/7257828#7257828>
Vanb38462666 or Daniel do either of you have a Library/Input Managers folder? If so what do you have inside that folder?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7257828#7257828 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7257828#7257828
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Downloading, Installing, Setting Up by email <mailto:[email protected]software.com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=46 71>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

When I'm using Safari, acasionally the menu bar just disappears. I'm running the latest version of Lion and the latest version of Safari. This is not a full screen app problem. I have multiple windows open. This happens all the time! Firefox is fine! ???

When I'm using Safari, ocasionally the menu bar just disappears. I'm running the latest version of Lion and the latest version of Safari. This is not a full screen app problem. I have multiple windows open. This happens all the time! Firefox is fine! What the ****? Please help!

Right, like I'm trying to say, THERE IS NO SAFARI MENU bar. Example: I have multiple applications open, I click on a Photoshop window, the correct menu or title bar or whatever changes. Every other application window I click on brings up the correct "whatever" bar. If I click on the desktop, the "Finder Bar" shows up.
Everythiing else, BUT SAFARI, works the same way since OS X came out. This is ridiculous.
I'm getting the vibe that Apple is trying to get rid of the finder.... this is the way wrong direction.

Running forms without ias

Hi,
what has to be done to run forms (9i) without installing the whole ias.
I'd like to have a simple install.
Is it possible to run it just with oc4j.
How can I do that.
It does not matter if it is not supported!
Thanks
Günther

It's possible to use OC4J to run webforms. That's how you test during development. It is not supported as a production method, though.
Oracle 9iAS requires a full install, but then you can turn around and remove everything but the Forms and Reports services. There are step by step instructions on how to do that.
Oracle 10 Application Server allows you to install just the Forms and Reports services without installing the full Application Server infrastructure.
Either way, you still pay the full Application Server licensing cost. Even though you're only using a small part of the product. Oh well. Marketing decisions like that are why people are tempted to try the Oc4J option.
Dave

Why i can not run forms in form builder?

when i want to test my forms, the system just tells me that my HTTP listener does not run port at 8888. how can i fix that problem?

hi, i just start the oc4j instance,however,it made another error that is "starting http server:address in used:JVM_Bind". how can i fix this problem now? thanks

Forms Developer 9.0.2.9 Hangs at Run Form

Hello:
I'm using Oracle 9i with Forms Developer 9.0.2.9. I am able to develop and compile forms but am not able to run forms. The IE6.0 window opens but hangs. No applet array appears. I have started jinitator(sp) and OJC4. There are no spaces in the path to my .fmb file.
I was able to run forms for a while but then it just started hanging. My guess is that some setting changed? Something with Java?
Any help would be appreciated as my semester long project is due next week.
Linda

Pamela,
Tried following thos steps. It still hangs at the same place unfortunately. I did notice a number of Java Console icons appearing and disappearing. A java problem maybe?
Thanks
Linda

Error running forms 10g on OC4J

Hi everyone,
I installed Oracle DB 10g and Developer Suite 10g (did not install Ap. Server) at the same machine (different homes), everything seemed to be OK, I use sqlplus with no problems, then I did this:
1) Created a table with just one field
2) Created a test form with Forms 10g using wizard with just that table and that field (I connect to oracle with no problems on forms builder)
3) Started OC4J Instance (but i have to leave the command prompt opened to run well)
4) When I run the form, it opens Internet explorer then shows Oracle application server forms service, but with this message ORA-12560 TNS: Protocol Adapter error, I click OK and ask me for a user and password, but the same error!!
IS there any configuration that I have to do on OC4J?? Why I can connect to oracle from sqlplus, enterprise manager and so, but it fails running forms, specifically when open OC4J???
Thanks in advance

Is it .../forms/registry.dat or .../forms/registry/Registry.dat?
Let's go back to this post. I asked you to try a URL to your form in a browser window, not Forms Builder. The 2nd part of your answer, you said...
But if the OC4J instance is NOT running I have
message says FRM-92120: Registry file
http://walaa:8889/forms/java/oracle/forms/registry.dat
is missing."If your OC4J is not running and you try a URL from a browser, you should be getting a "Cannot find server or DNS Error", not an Oracle error. The only way I could reproduce your error above was to run from Forms Builder with OC4J started and having manually renamed my Registry.dat.
If you didn't edit your Registry.dat (and possible hose it), then someting just went wrong during the install. You could check you installation log. Mine is at C:\Program Files\Oracle\Inventory\logs\installActions2006-03-11_03-50-02PM.log and has a single line containing "Registry.dat" showing the target location.
Is this Forms10g R2 on Windows? You could uninstall ODS and reinstall in probably 30 mins to an hour. Maybe you want to consider that.

Error running forms 10g with OC4J

Hi everyone,
I installed Oracle DB 10g and Developer Suite 10g (did not install Ap. Server) at the same machine (different homes), everything seemed to be OK, I use sqlplus with no problems, then I did this:
1) Created a table with just one field
2) Created a test form with Forms 10g using wizard with just that table and that field (I connect to oracle with no problems on forms builder)
3) Started OC4J Instance
4) When I run the form, it opens Internet explorer then shows Oracle application server forms service, but with this message ORA-12560 TNS: Protocol Adapter error, I click OK and ask me for a user and password, but the same error!!
IS there any configuration that I have to do on OC4J?? Why I can connect to oracle from sqlplus, enterprise manager and so, but it fails running forms, specifically when open OC4J???
Thanks in advance

Did you save the form before running it, in the context of the builder? there is a known bug in this area.
Patrick.

Export Libraries path to run forms in linux

I'm using Oracle 9i A.S. in Linux (RedHat 8). Now I need to export Libraries path in diffrent folder. Would some body have any idea in linux how to export Libraries in diffrent folder to run forms. I tried export from .bash_profile but it doesn't work.

Thanks Klaus.
I have already define LD_LIBRARYPATH in .bash_profile:
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/jdk/jre/lib/i386/hotspot:$ORACLE_HOME/jdk/jre/lib/i386/native_threads
Now I need to export FORMS90_PATH.
I just export FORMS90_PATH in $ORACLE_HOME/forms90/server/default.env and in .bash_profile as follow ::
FORMS90_PATH=$ORACLE_HOME/forms90:$ORACLE_HOME/forms90/test/libraries:$ORACLE_HOME/forms90/test/forms:$ORACLE_HOME/forms90/test/icons
Now it load LIBRATY but after login other submenu is not working.
Anybody have Idea about this..

All emails stopped being sent - they just disappear with no record

Can't figure this one out. My wife can no longer send any email from Mail (5.2/Lion) from any accounts. All servers work, and she receives all mail in both accounts – one a mac.com/iCloud and the other on our own company service, both IMAP. Just cannot send from any. When you compose an email, everything goes as normal until you hit the send icon. Then the mail just disappears as it normally does, but no 'whoosh', no activity progress bar, no copy in Sent, no copy in Draft, mail not received by person intended. It just seems to have disappeared as it it never happend. It started a week ago for no apparant reason – no new SW installs or updates, nothing.
This is her extra computer – all works fine on the main work one, a Mac Mini, and the IMAP syncing works as expected on the MBP. All email work done on the Mini is reflected on the MBP as it should be.
What I've done (to no avail): repaired permissions, rebuilt all the mailboxes, deleted and reinstalled all servers, deleted mail .plist file, deleted and re-installed accounts. Results still the same. I tried to set up the supplied Mail logging script but get an error that it can't be run so do not have any logs I can refer to.
Her machine: MacBook Pro 15, late 2008, 6 gig ram, 10.7.4.
I could really use some help with this if anyone has some suggestions. Scratching my head...
~Roger

Hi kjpat2000,
Welcome to the Support Community!
Do you mean email messages with .pdf attachments are not being received by your BlackBerry® Torch™ 9800 smartphone? If so, please try resending your email service books and test with new email attachments only. The following KB article provides the steps to send service books. "How to send service books using the email setup application on the BlackBerry smartphone" http://bbry.lv/WhLN19
Hope this helps.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

9iAS default databse login screen when run form in browser

Gurus!
If u remember me! last time i have asked u what should
i do to invoke my own .html file while typing the ip
of my oracle application server machine, u gave me a
solu., that WORKS! thank u very much for that! now the
prob. is that when i run my forms application through
that .html form(which is infact the tester form to
test that if form server is successfully installed or
not, i am using that form with litle modifications i.e
instead of running the test.fmx i gave it the name of
my own form.)Every thing is installed successfully but
when invoked my .fmx form through index.html file it
displays the login form of oracle which appear when u
not supply the user/password@db info. but i have given
these info. when calling my .fmx file. whats the
prob.?
Kindly help in this frustrating situation again ASAP!
Very thankfull to u!

i got it
just make report out of SSO by the steps
If you don't want to use Single Sign-On:
Edit $ORACLE_HOME\reports\conf\rwservlet.properties
Change #SINGLESIGNON=YES to SINGLESIGNON=NO
Log in to the Enterprise Manager website at http://<server_name>:18100
Navigate to the Report server page. Click on the "Edit Configuration File" link.
Delete the section that reads
<security id="rwSec" class="oracle.reports.server.RWSecurity">

<property name="oidEntity" value="reportsApp_apps10_85643151B9D911DCAF4E278FF4D47F77"/>
</security>
Press “OK” and let EMWebsite restart the reports server. or restart all
and it will work ...

Discoverer report runs okay in test system but very slow in live

Hi all
My Discoverer report takes about 5 minutes to run in the test environment. The same report (absolutely the same SQL in the custom folder in the admin edition and the same conditions and sort in the Desktop edition) takes at least 45 mins to run in live.
Has anyone faced a problem like this? How can I speed up my report in the live environment? I am using Discoverer version 4.1.48.06.00
Thanks in advance!
Regards
Aruna

Hey Aruna.
Are you sure the 2 environments are exactly the same (ie: one recently copied to the other)? Reason I'm asking is that if one has many more records, or one has an index, etc. then that would, of course, cause a difference.
What about the time when you're running it? Is the production environment an Apps environment and they're running batch jobs, updating shipping info in the last week of the month, etc?
I would first of all see if the environments are the same by trying something as simple as running the query in TOAD or SQL Navigator or SQL Developer in both environments and then seeing if there's the same difference. If not, then move on to the Discoverer side of things.
If they're still different, then are the Disco environments the same? Have you turned query prediction, etc. off in DEV but not in PROD?
Is the DEV box a hot damn new UNIX box with all the good stuff like oodles of memory, multi-processors, etc? And is the PROD box a Commodore 64? Okay, just kidding on the last test, but you get the idea.
Start at the same relative time (ie: morning). Start TOAD, etc. and see the speed difference there. Then move on to Disco and see the speed difference.
Russ

Run Form to test just disappears

Similar Messages

Maybe you are looking for