Run from a flash drive

Does anyone know if Illustrator or Photoshop can be run from a USB flash drive on the MAC versions ?

Similar Messages

Running from a flash drive.

Some of my programs run from a flash drive. The drive has Java on it in case the user does not have Java on their machine. In order to run java 7 one must have OS X 10.7.3 or greater. If a user has 10.7.2 on it his machine and the flash drive has java 7 on it can the program, which is also on the the flash drive, be run.
Thank you,
Richard Mittleman

Sorry but I can't say it any better except the period at the end of the last sentance should be a question mark.
Thanks.

Is it possible to run iTunes from a flash drive?

Hi Everyone,
I just would like to know if you could run iTunes off a flash drive? It takes up alot of space on my hard drive and was hoping to free some up. I have an 8GB iPod and currently it's filled with 6.08GB of music. I purchased a 16GB flash drive and was thinking I could run it off there. See I don't access iTunes all that often and hopefully won't kill the drive. I guess the next part would be how should I go about it if it's posible?
Thanks so much in advance!

You can certainly put your library on a flash drive, though I'd strongly, strongly recommend that you have another copy of your library elsewhere, as flash drives are easily lost, broken or corrupted. You cannot count on tracks always being available for redownload from the iTunes Store, if you have any such.
The easiest way to move your library is to just drag the entire iTunes folder (the _entire_ folder, _not_ just the iTunes Music folder) to your desired location. Then hold down the Shift key while launching iTunes. You'll be given a dialog box where you can select the iTunes library you want to use. Navigate to and select the iTunes folder in it's new location.
Note that this procedure assumes that all of your tracks are contained in the iTunes folder. If they're scattered around your volumes, moving them becomes much more complex. And don't launch iTunes with the flash drive not mounted or iTunes will default back to the internal drive. If it does, though, just mount the external drive and launch iTunes with the Shift key again.
Don't delete the tracks from the old location until you've confirmed that they're working correctly from the flash drive.
Regards.

How do I import music files from a flash drive to my iTunes library on my laptop

How can I import music files from a flash drive to my iTunes library? I put the flash drive into my laptop, selected " add file to library", selected the songs I wanted from the flash drive, and it looked like they were added as the names show under " recently added". Then I removed the flash drive from my laptop But when I select one of the songs and try to play it a message saying "the song could not be used because the original file could not be found. Would you like to locate it?" So it seems the actual files did not transfer. What do I do? I have done this. With a cd in the past with nsomproble,.

Suncadia wrote:
Thank you!! This worked. It does seem there should be an easier way but this did work.
Dragging the files to "Automatically Add..." is pretty easy once you know where to look. Just make sure iTunes is running when you do it; otherwise the files will just sit there until the next time you open iTunes.
(Interestingly, the way you originally tried to do would have worked fine except for one little detail: you have to first go into Edit > Preferences > Advanced, and check the box for "Copy files..." If that is not done, iTunes will reference the files on the flash drive, which of course are not accessible once the drive is removed, as you saw.)
Anyway, glad that all is now sorted. Enjoy the music!

Booting from a flash drive

So I have a G4 that meets all the requirements for 10.5. I am currently running 10.4.11. I have a copy of 10.5 which is on a flash drive. I looked into it and followed the instructions on how to load from a flash drive. Reformatted to allow journaling and used disc utility to put the 10.5 installer on there bur when I hold option to try and boot from the drive the only possible drive to boot from is my internal hd. The flash drive doesn't come up as an option. Any ideas why?

Why rare when I can do it! All you have to do is type in open firmware the following:
boot ud:3,\\:tbxi or if you just have one USB device, type: boot ud:,\\:tbxi.
Works everytime, also works for flash drives and external optical drives hooked up to USB..
Only drawback: It won't appear as a start up disk under system preferences, I am trying to figure out how to hack it to make it recognize it. USB 2.0 booting on PowerPC was introduced silently with Tiger 10.4.3(from what I read).
for any powerpc mac, go into open firmware and type: devalias.. scroll until you see "ud"(your device needs to be hooked up for this to work). Then follow the instructions above.. You will be amazed to welcome USB as a new member of your powerpc bootable family.

I've gotten a kernel panic 4 times in a row while trying to reinstall lion osx from a flash drive to a reformatted hard drive. How is this possible when there's "nothing" on my computer?

My SSD failed and I was instructed to reformat my hard drive and restore my files. I erase my hard drive using Disk Utility and reinstalled Lion from a flash drive. While Lion is installing, I get a kernel panic. That's happened now four times in a row and I'm befuddled because I don't have anything on my computer to conflict right? Please help.

eubiedoo wrote:
Do you think it's ram related?
No way to tell unless you test it. Like I said kernel panics are usually hardware related. Since your Macbook Pro is from the "2009" era, run the Hardware Test disc which you should already have - Intel-based Macs: Using Apple Hardware Test
Apple Store diagnostic testings are FREE. It's the repairs you are responsible for if out of warranty.

T400s Linux/Windows dual boot with Linux from Esata Flash Drive

This project is about a dual boot Windows/Linux system without using the normal dual boot changes in the bootloader of the windows hard drive. When I started this I found bits and pieces of information on the web but no complete description so I wrote this post.
I have done a dual boot system on my previous Thinkpad where I had partitioned the hard drive between Linux and windows. For this project I wanted to leave the windows hard drive absolutely intact and unaltered, and boot Linux from a flash drive in the esata port on the back of the T400s. Obviously this uses the F12 boot list function key to boot from the flash. The advantage of this is that Windows is totally unaltered and when I need Linux, I plug in the esata flash drive, hit F12 during the boot cycle and select booting from the esata flash drive. The reason for Esata rather than USB is simply speed. I have a nice fast Linux installation.
I used the OCZ esata flash drive but suspect any of the alternatives will work. It did not need the accessory usb cable because the Thinkpad powered the esata flash directly.
To boot from the esata drive I had to make the following changes in the bios
    I left the esata flash plugged in as I went into the bios
    Bios>config>Serial ATA and changed the Sata controller mode option to compatibility
    Restart and back into the Bios
    Bios>startup>boot - in my case the esata flash drive showed up as ATA HDD2 and was excluded from the boot order so I had to un-exclude it and move it to the point in the boot order that I wanted.
Next I downloaded a linux installation iso and put it on a CD - in my case opensuse. Then booted from the CD
From now on this instructions are specific to opensuse and yast but can be generalized to whatever Linux is being used.
In my case yast came up with a good set of suggestions for automatically partitioning the flash drive but then crashed during the partitioning itself. So I rebooted and specified the partitions manually.
    A fat32 partition left as a partition which both windows and Linux could see (in my case about 20% of the drive) (/dev/sdb1)
    An extended partition with the remainder of the drive (/dev/sdb2) which contains the following logical partitions
    A linux Swap partition of 2GB (/dev/sdb5)
    A linux /home partition –the remainder of the drive (/dev/sdb6)
    A linux /root partition of 8GB (/dev/sdb7)
Yast automatically suggested mount points of C,D,E for the windows partitions. Unfortunately because of the way the Thinkpad hard drive was laid out Yast had C assigned the ThinkPad Service partition and D assigned to the SW_Preload (or main windows partition). However there was an edit function that allows for the reversal of those mount points so that the windows C drive is mounted in Linux as Windows/C thereby avoiding confusion. I had already backed up and removed the Thinkpad factory install data so I did not have to deal with that. Yast suggested Windows/E for the mount point of the FAT32 partition on the flash drive, which I accepted.
The yast install configurator made all this manual selection easy, and after the manual configuration the partitioning worked perfectly.
Next step was Linux user configuration which went fine
Next was booting.
In the section management tab
    delete the windows 1 and 2 options (since we are not dual booting directly)
In the boot loader installation tab
    uncheck boot from mbr ( this stops the install from installing Grub and dual boot on the windows c drive
    check boot from root partition (this installs grub and all associated files in the Linux root partition (/dev/sdb6)
I believe that the correct procedure at this point is to click Boot Loader installation details which will bring up the Grub device map. In the device map there will be a line for the fixed hard drive (aka the windows drive) and a line for the esata flash drive. When the installer started up these were in hard drive and esata drive order. However when we boot directly from the flash the esata drive will be grub drive hd0 and the fixed hard drive will be grub hd1. The device map order needs to be changed to reflect this ie the esata drive should be first not second.
I did not do this and ended up initially doing Grub command line editing to boot and later manually editing the grub files using information I had previously learned the hard way and through google.
At this point let the installer go ahead and install Linux. After doing this it should come back and tell you to reboot. Do not do it yet because we need to install the MBR into the flash drive.
I suspect that there is a way of doing this in Yast running from the Live CD but it was not obvious to me so I used the manual method that I have used before.
Open a root terminal
Mount /dev/sdb6 to /mnt/sdb6 (my linux root)
Touch /mnt/sdb6/boot/grub/flag
The purpose of this is when we go looking later at the grub command prompt we need an easy to find unique file
Start grub and do the following
#grub
            grub> find /boot/grub/flag
                (hd1,5)    -- the result of the find in my example
            grub> root (hd1,5)   -- using the result of the find in my example
            grub> setup (hd1)   -- install mbr -- my example parameters - if you get this wrong you will trash some other drive!!!
                  hopefully grub announces success
            grub> quit
Reboot and select the flash drive. In my case I still had the grub devicemap wrong and had to edit the grub commands during boot to tell grub how to find the correct partition and then edit them again after booting
Typical linux install issues that we all always seem to have and can be solved with a little (or a lot of) google research.
As I said at the beginning I now have an untouched windows installation and a nice fast Linux installation. I hope that this will be of some use to someone.

Hi chrissh
i tried this exact procedure... on the exact same notebook (T400s). However, as soon as I set the
   Bios>config>Serial ATA to "compatibility", I cannot use my default Windows installation! I immediately get the "blue screen of death".
I doubt I did anything differently since this is the first step of your procedure and my laptop is brand new!
any idea?

How to boot from USB flash drive - Portege R500

Hi,
I have a Portege R500 running Windows XP, brought about 2 years ago, and recently contracted a worm virus that has infected some of the start up files as the minute I log in it logs out again, even in safe mode! Quickest way I can think of sorting it is to reformat it with the XP recovery disc and reinstall windows.
Problem!! The CD/DVD drive on the laptop stopped working a while ago, have tried pretty much everything in the thread on this site but had no luck.
So my plan was to boot from a USB flash drive and do it that way. However in the boot settings I only have the options of HDD / FDD / CD-ROM / LAN, neither of these will work. Does anyone know how to boot from USB flash drives?
Any help would be really appreciated

Hi
As far as I know it should be possible to boot from USB FDD
Im not sure if you would be able to boot from USB flash drive but its definitely worth a try
Generally you could try to press F12 button when notebook powers up.
Then a boot menu should appear on the display and you should see all bootable devices.
PS: As far as I know the USB booting was available in ToshibaHWSetup (Toshiba tool which changes the BIOS settings in windows OS.) Therefore I assume booting from USB should be possible.
Greets

I would like to buy a developer license to use on a mac at a public library from a flash drive any issue with this?

I would like to buy a developer license to use on a mac at a public library from a flash drive any issue with this? Very new to this

The license is for the Developer not the machine it is run on However there could be soma issues with trying to develop on a public machine.
The biggest is does the library machine have or will they let you install and run Xcode and if you are developing for IOS will they let you plug in your devices?
In addition will they allow you the hours needed on the machine? Most public machines have a time limit especially if there are others waiting to use it.
All-in-all in can be done but it won;t be an easy situation.
good luck

NB100 - How can I reinstall OS from USB flash drive

My TOSHIBA NB 100 notebook does not have CD-DVD drive.
OS is Windows XP Home SP2.
OS is not booting.
Notebook won't start at all so I cannot run any sort of test when i turn it on.
The we apologize screen come on it says run safe mode, safe mode networking, safe mode comand prompt or start windows normally. But no matter which I chose it won't start it only goes to Windows and seems like its starting but then shows the blue Windows screen & stays there.
So I want to reload Windows from my USB flash drive.
The BIOS boot sequence is HDD - FDD - FD - CD - USB Memory.
What are the steps for loading Windows from USB flash drive?
If this does not work then I want to connect another laptop with Windows CD in its CD-DVD drive to the Notebook.
Will this work? Will the Notebook use the Windows CD in the laptop drive to load the OS?
How to do this connection?

Hi
Usually you would need an external USB CD/DVD drive in order to boot from the Windows XP disk or Toshiba recovery disk.
But there is a method which allows you to install the Win XP using 2GB USB flash drive.
This is possible because the BIOS of NB100 support the booting from USB memory stick.
Pease check this internet page:
+Installing Windows XP Using A USB Flash Drive+
http://www.pctipsbox.com/installing-windows-xp-using-a-usb-flash-drive/
Hope it could be helpful.

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

How do I import music from a flash drive that was formatted with a windows PC to my MacBook?

How do I import music from a flash drive that was formatted with a windows PC to my MacBook - the drive is showing it has over 3GB of info on it but none of the files are showing up in finder? I had backed up my iTunes library on the flash drive about a year and a half ago before I switched from a dell to a MacBook pro.

What I found works for me is to make sure iTunes keeps the music files organzied in the iTunes Media folder according to album, artists, etc. and that it copies the music files there when adding them to the library. That way, if something happens to the library, the raw files can always be re-imported again.

How to restore library and iPod from external flash drive

I had trouble getting my iPod to load new music after I got a new PC. I reinstalled iTunes and the new music loaded but the old music in my library and iPod were deleted. How do I transfer my music from my flash drive back to my library and iPod classic?

did you ever find the answer to this question? I have the same problem

How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; I also have Microsoft Word installed on the Mac as well.

How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; none of the options I choose work. I also have Microsoft Office (with Word) installed on the Mac as well.

Format the external drive as FAT32 or ExFAT. Both computers will then be able to read and write to it.

Lost video file from a flash drive using iMac

I played a video file that was saved on a flash drive on my iMac. After the video played, it was automatically deleted from the flash drive. I did not physically delete the file. When I closed the file, it simply vanished. Is there anyway to recover the file?

Thanks for your response. I didn't notice the file in the trash after this occurred. If it was there, it is long gone by now anyway since I've emptied the trash several times since the incident (unless someone has an answer for recovering files that have been deleted from trash?). If it happens again, I'll pay closer attention to what is in the trash and see if this works. Thanks again.

Run from a flash drive

Similar Messages

Maybe you are looking for