Run iPad with power connected

can I run ipad with charger plugged in

Sure, no problem with that. It will charge up more slowly and you should use the wall plug adapter, not a computer USB port (a computer port will not have enough power to run it and charge it at the same time).

Similar Messages

IPad with Cellular Connectivity

I am subscribed to a Telstra ADSL/2 Service. I have a first generation iPad with both Wi-Fi and Cellular capabilities. This device has some limitations for example iView [ABC] won't run because the application is not backwardly compatible with that devices iOS. Since retiring I hardly ever use the cellular capability when out and about. In fact I have only charged the sim card when I was using the device whilst away on holiday. I am not sure that the additional cost for cellular plus the sim card and a data plan to keep the service active warrants the expenditure. I am thinking of upgrading to an iPad Air 2 and would like crowdsupport subscribers views as to whether Cellular on this device was absolutely necessary for occasional remote access when a mature Telstra Air Network is available?

Hi there Ant, well I can rerlate exactly to what you are asking and stating there. Like you I have a tablet which has both sim and wifi conectability and it's rare that i would use the sim connection. I look at it this way, with all the WiFi Hotspots that are around and growing (Telstra Air and others) you'll more often than not find something to wifi with. If you can't and you are desperate and have a mobile phone, just use that as a personal WiFi hotspot, tether. So yes you could save on the sim expense. The other thought bubble is, if for instance you were going away say for a month or what ever, you could always just get a cheap pre-paid to use during that period.

Satellite P50t-A - Forced hibernation even with power connected

Hello,
I have a Satellite P50t-A where the battery appears to be failing. It is reading 0% and the charger is periodically charger is turning on and off. When it stops charging (about every 5 mins), the computer run for a period then enters forcefully enters hiberation. This hiberation occurs eveen when the power is connected. Why is it entering hiberation even when the power is connected? Why does battery status has precedence over a stable power?
I have ordered a new battery and waiting for its arrival. In the interim, how to force the laptop to run on power (ignore the battery status)? If I open up the laptop and remove the battery, will it run with the power connected and the battery removed?
Regards
Graham

Update. Disassmebled laptop and disconnected the battery. It now powers up now and the battery monitor reports "no battery detected". After running it for a period, the forced hiberation no longer occurs.

CF card to Ipad with camera connection kit?

I have a cannon 5d and 5d mark ii, and was really hoping to transfer images to my iPad from these cameras via the camera connection kit as they both use CF cards and not SD cards. But these cameras do not work with the USB camera connector. So I thought maybe I could use a card reader and the USB connector. But my card reader seems to use to much power. Does anyone know of a CF card reader that works with the connection kit or any other method that may help me??. Thanks

I have a Canon 20-D and I intend on getting an upgrade Canon (not the 50-D but the one step up from that, ... the one with video capability). Anyways, I bought the Apple camera connector kit and it is the BEST...! I, too, had an initial problem with not being able to use the connector kit until I remembered that I have this "Hama" USB2.0 Card Rreader )35 in 1 (this is what I am reading that is on top of this dark blue item that is the intermediary between the camera connector kit doohicki and my computer (or ipod, or iPad). It works like a charm.
The best thing of all is that this USB camera connector kit is NOT just for pics but can be used for lots of things that are USB connectable. In the newest issue of MacLife they discuss the multiple uses of this camera connector kit. One can even use it for a (USB) key board. One thing that i like about Apple's c.c kit is that the photos that you take can be put directly onto your ipod or ipad or iphone WITHOUT first downloading onto a computer ( & then transferring them).

Satellite L40 won't shut down with power connected, and won't go in standby

Hi everybody. I hope someone can help me. Basically, there are two problems: one with shutting the laptop (Satellite L40-17U (Vista 32-bit Home Premium SP1) ) down when the power is connected, and one with closing the lid and putting it to sleep.
1. Since a few weeks, it suddenly doesn't want to shut down, whenever the power is connected. When it is on battery, it will shut down. When the power is connected and I try shutting it down, it seems like it shuts down (all activity ceases and the LEDs go off) for about 1 or 2 seconds, and then it goes back on.
2. When I close the lid (all settings in Vista are set to put the laptop in 'sleep' status when the lid is closed) the laptop goes into a state from which it can only be recovered by shutting it down by pressing the on/off button for about 10 seconds to completely shut it down. When closing the lid, only the battery LED keeps blinking orange (the way it should be), but apparently the laptop keeps consuming power, because when I reboot it later (first having to shut it down as described above) the battery tends to be quite a emptier than it was before rebooting it (like going from 100% to 65% in 30 minutes, while being in 'sleep' state). Also, when I open the lid, the other LEDs do go on again (green), but nothing happens.
After rebooting by first pressing the on/off button for 10 seconds to shut it down, I frequently get a message that Windows could not be started, and have to run System Repair.
I've just done a completely clean installation with the product recovery CD (didn't install SP1 yet), upgraded the BIOS to v1.90, but the problem remains.
I'm afraid my only option will be to bring it away for a warranty repair, but knowing that these repairs can take weeks, I'd prefer to try a solution anyone here could recommend me first. If you have any ideas, please let me know.
Thanks,
Daniel Breslauer

Hi guys
Never had such issue on my notebook but regarding to another users here in the forum the BIOS might help to solve such strange notebook behavior
To be honest the shut down issue is not known to me I noticed an standby issue on my notebook but the BIOS update helped.
Therefore I recommend updating the BIOS firstly.
If the issue will still appear, then the ASP should take a look into the notebook.
Good luck

PowerBook runs HOT with iPhone connected

Has anyone else observed their computer running hot (fans rev up real fast!) while their iPhone is connected? I'm still waiting for "the new at&t" to get my activation unclogged, so maybe it's just because my iPhone is still in a pre-activated mode, but whenever I connect it to my 12" PowerBook G4, the computer starts heating up and revving its fans like it is working REALLY HARD. A check of the Activity Monitor shows that the CPU is below 10% and there are no unusual messages flooding the console.log or system.log ...
Anyone else seeing this?

Yes, my PowerBook revs up even when both it and the iPhone are idle (screenlocked even-- the iPhone not the PowerBook!)
But you have a point.. maybe the problem has something to do with the PowerBook's power management chip. I'll try following Apple's PMU reset procedure tonight when I get home. While I'm at it, I'll try an Open Firmware reset too.
I'll post my findings..
Thanks everyone for your help on this!
My fiancee's iPhone connects to her 1.25 GHz 12" PB
without the rev-up problem most of the time. But it
does rev up when it's doing anything remotely
computationally intensive, like resizing photos. If
yours is doing that just from being connected, that
is strange. What is the internal temperature of the
PB? (There are some programs and dashboard widgets
that will tell you, I think - not sure what
thermometers the 12" PB has.) Maybe you have a vent
blocked or something.
This might be becoming a question for the 12" PB
messageboard - maybe it's a general problem with
high-drain USB devices on some models?
Have you tried hooking up the iPhone through a
powered USB hub? That would perhaps isolate if it's
a current-drain issue. Maybe this is a symptom of
other power-supply problems with the PB.

Solved. Closed lid mode only works with power connected

I was banging my head a bit trying to figure out why my MacBook Pro was no longer working with the lid closed when attached to my external monitors. Anyway I figure out that for this to work properly the power must be connected. I am guessing it has to do with the power profile used.
I hope this finds anyone dealing with the same issue.

After setup, I pulled the power and laptop and connected the main port to the LAN.
I assume by this you mean that you connected the WAN port on the AEBSn directly to your LAN using an Ethernet cable ... correct? If so, how is your LAN getting Internet access? That is do you have another router, switch, or modem in the LAN?

Skype is running slow with low connection.

So I am having problems with skype latly and it has to do with connection speeds . I have check all fire wall settings and nothing is stoping skype from running properly, So im really confused on why I have slow connections. ill be talking to some one and they can hear me fine but when im listening to them the will start talking and they will freez. and the blue indicator that appears around that persons icon will lock up as if they were talking but nothing is coming through. so iv been reserching and i can seem to find anyone elce with this exact problem. so i came here. i have a fast computer. i5 and a amd videocard. so its not computer speck related. my internet is clocking in 55/10 mb/s and i am using eathernet. so can anyone please help?

also ping is at 11

Any way to run disc with Power PC program in Mountain Lion?

Hi, I'm trying to run a disc that seems to be only supported in earlier OSX versions that accommodate Power PC applications.
Here's the message I'm getting:
"You can't open the application ... because PowerPC applications are no longer supported."
Any suggestions? Thank you!

More details please:
• What disc?
• Why did you upgrade to Mountain Lion? for what features?
• You say: "I'm trying to run a disc that seems to be only supported in earlier OSX versions..." This seems to imply that this is the first time you have tried to run this disc. How important to you is it to be able to run this disc on a continuing basis?
The answers to these questions and as many details that you can provide as possible will help us focus on the best solution to your problem: Yes, solutions exist!

Transferring videos from Sony cybershot camera to iPad with Camera Connection kit

My USB CAMERA CONNECTION KIT works when I transfer photos from my sony cybershot camera, but when I try to open he videos I get an "cannot read" error. Any ideas?

Your Sony Cybershot video format is probably not supported. See list attached.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201A/c1ca11e3a84fac3829 b738f8b80103e2_zpscad24d4f.jpg

Is there away to put music from iPod to iPad with out connecting to itunes

Is there a way to get music from iPod to iPad without hooking up to iTunes?

Yes, you can.
Use a Transfer software called iPad to computer transfer, also supports transfer files (musics, movies, photos, ebooks etc) from iPod, iPhone to PC or Mac.
you can get the transfer software here (not free)
http://www.movies-to-ipad.com/ipad-transfer.html
Best regards

The new Ipad and camera connection kit with Sony A65 RAW

Hi,
I recently purchased the "new ipad" with camera connection kit. I'm shooting photos in RAW format with Sony A65 and I have succesfully transferred them into my Ipad. The problem is that none of the applications such as Snapseed, Photoforge2, etc. will display the full 24 megapixel image from the RAW file and will instead show small preview.
It is indicated in support pages of these applications that there should be support for IOS Raw engine supported RAW files with full size. Can someone indicate me what RAW formats are supported by IOS 5.1 and whether support for Sony RAW files will be added.
The same problem persists with 16 megapixel images from Sony A55.
Thank you in advance.

Thank you, David, but actually your answer is not helpful. As I explained in my opening message, I am interested in buying and using an i-Pad while on a trip in Spain, where I will not have access to a computer, other than, perhaps, one at the Apple Store where I might buy the i-Pad.

Ever since updating my iPad with the iOS 8 and 8.0.2 it has been much slower in every way. Any suggestions besides restoring to last iOS?

Ever since updating my iPad with the iOS 8 and 8.0.2 it has been much slower in every way. Any suggestions besides restoring to last iOS?

Hi Arianelleangel,
Welcome to the Support Communities! If you are having issues trying to update your Aunt's iPad, the troubleshooting steps below may help:
Resolve issues with an over-the-air iOS update - Apple Support
Update does not complete
If you're installing the update and the progress bar appears to move slowly, be patient. The time an update takes depends on the size of the update and the number of files on the device.
When you're updating over the air, keep your device connected to a power source so that it doesn't run out of power. If your device does run out of power, connect it to a power source and turn on the device to let the update or restore complete.
If the update never completes and the progress bar hasn't moved for an extended time, try restarting your device. If you still see the issue after you restart, see what to do if your device appears frozen or won't start.
I hope this information helps ....
- Judy

Yoga 3 pro cant restart without power connected.

I am hoping to get my problem solved because i am abroad.
Aftes the y3p goes to sleep or is **bleep** down mostly in some hours it can only be restarted with power connected (and that feature is not enabled in OkO). When it is up again the battery show the charge as when it was closed down.
If i sent it to sleep and restart it seems ok.
I have upgrade bios and try to recover.
Earlier when got the machine the battery status shows Strange value.
Hope somebody can help.

A better description of the problem is:
1. In any mode it could suddenly shut down (power save, balanced, high performance).
2. Sometimes the sleep function and normal shut-down/up works, and I can restart without problem.
3. But many times it can’t boot without connecting the power supply (and that is without enable that special feature in OKO). Especially if it stands some hours it wont boot.
4. When rebooting with power supply, the battery status show 0% after a while 100% (even the battery when it was shut down was ex. 65)….after a while the status show 65% again.
All in all I haven’t used in longer time because the problem are very annoying, and unacceptable.
I tried to make factory recovery and upgrade the bios.
Later on after some full recovery actions it is now changed a little from before. Point 1-3 is still the same, but now the battery always shows the same status as when it was shut-down, put on sleep etc. but still power connections is mostly needed before it reboots.
Sadly it seem like nobody have similar problems and Lenovo can't give some advise/help, maybe it is just a defect machine.
Thanks.

I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years, I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months

I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years,
I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months ago I decided to use Mobile Me. However, there were problems with duplication of calendars and then “rogue events” – which could not be deleted – even if deleted on Outlook and on the iPhone (or both at the same time) – they would just reappear after the next synchronisation. All other synchronisation areas (eg Contacts, Notes etc) work fine.
I have looked for help through the Apple Support Community and tried many things. I have repaired my Outlook. I have repaired my .pst file in Windows. I have re-installed the latest version of iTunes on my PC. I have re-installed the firmware on my iPhone. I have tried many permutations on my iPhone. I have closed down all Mobile Me functions on the iPhone. I have spent upwards of 24 hours trying to solve this problem.
What am I left with? Outlook works seamlessly on my PC. My iPhone calendar now has no events from my calendar, but does not synchronise through iTunes. Nor does it send events initiated on the iPhone to the Outlook. I am at the point of abandoning iPhones and iPads altogether. I need to have a properly synchronising calendar on my phone. Do you have any suggestions?

In the control panel goto the "Lenovo - Power Manager" and click the battery tab, there is a maintenance button in there that will let you change the charging profile for your battery. (from memory, so exact wording may be off)
The lower the numbers you use there, the longer the battery *should* last. These batteries degrade faster at higher charge levels, however storing them at too low of levels is also not good for them... I've read that 40% is optimal, but just not realistic if you use your computer.
--- ThinkPad T61 / Win 7 / Core 2 / 4gb RAM / Nvidia / Still used daily --- ThinkPad Edge 15/ i5 / Win 7 / TrueCrypt / 8gb RAM / Hated it, died at 1 yr 1 mo old --- ThinkPad T510 / Win 7 / TrueCrypt / i5 / 8gb RAM / Nvidia / Current primary machine --- ThinkPad X220 / i7 / IPS / 4gb / TrueCrypt / My Road Machine

Run iPad with power connected

Similar Messages

Maybe you are looking for