Run JSP under Apache?
I know this is a dumb question but here goes...
I've been running JSP/Beans/servlets with Tomcat - is it possible to do this using Apache as the HTTP server? I'm confused and am not finding the answers I'm looking for in the online docs or FAQ's.
Thanks
Thank you very much!. This is what I was looking for and could not find...
Similar Messages
-
Re: execution problem with oracle jsp under apache
i followed the instruction to install oracle jsp running on apache 1.3.9 and apacheJServ/1.1b3 under win nt 4.0 with sp5. i created a servlet zone to hold the jsp file but for some reason it will not look the the dir specified in the jserv.conf. it look at the dir under apache document root dir.. therefore, i created a dir under the apache root dir and then it was able to compile the hellouser.jsp correctly. when i run lotto.jsp, the image files would not display. why?
Apache Servlet zones allow you separate servlet (sets) into distinct classloaders. The OJSP servlet needs to exist in a servlet zone. However the content the OJSP servlet operates on (the .jsp file) lives in the document root directory just like your other web content. OJSP does support a configuration/init parameter whereby you can explicitly specify a physical directory other than what is mapped via the Apache settings. Please consult the documentation if you want to do this.
As for why the lottery images aren't being displayed, more information is needed. The generated page should create local references to the images files. Are the images in where they are expected to be? Can you be more explicit about the URI you send and the physical structure of the Lottery sample in the file system? -
Running JSPs through Apache Jserv in OC4J
hello there -
I'm hoping someone can help me.
I want index.jsp, our first page, to ACT like a JSP, rather than the current HTML. It seems that httpd.conf wont access OC4J, so i've attempted to access Jserv. Still, things wont work.
If someone could please take a look at what i have so far in httpd.conf, more specifically, near the bottom where i've opened up Jserv, and let me know what i'm doing wrong, i'd greatly appreciate it!
## httpd.conf -- Apache HTTP server configuration file
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://www.apache.org/docs/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# After this file is processed, the server will look for and process
# /devl/ics3/devl/apache/srm.conf and then /devl/ics3/devl/apache/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/usr/local/apache" will be interpreted by the
# server as "/usr/local/apache/logs/foo.log".
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerType is either inetd, or standalone. Inetd mode is only supported on
# Unix platforms.
ServerType standalone
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
# you will save yourself a lot of trouble.
# Do NOT add a slash at the end of the directory path.
ServerRoot "/oraapp/9iAS10220/home/Apache/Apache"
# The LockFile directive sets the path to the lockfile used when Apache
# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
# DISK. The PID of the main server process is automatically appended to
# the filename.
#LockFile /devl/ics3/devl/apache/logs/httpd.lock
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile /devl/ics3/devl/apache/logs/httpd.pid
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this. But if yours does (you'll know because
# this file will be created when you run Apache) then you must ensure that
# no two invocations of Apache share the same scoreboard file.
ScoreBoardFile /devl/ics3/devl/apache/logs/httpd.scoreboard
# In the standard configuration, the server will process httpd.conf (this
# file, specified by the -f command line option), srm.conf, and access.conf
# in that order. The latter two files are now distributed empty, as it is
# recommended that all directives be kept in a single file for simplicity.
# The commented-out values below are the built-in defaults. You can have the
# server ignore these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#ResourceConfig conf/srm.conf
#AccessConfig conf/access.conf
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
# Server-pool size regulation. Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
# It does this by periodically checking how many servers are waiting
# for a request. If there are fewer than MinSpareServers, it creates
# a new spare. If there are more than MaxSpareServers, some of the
# spares die off. The default values are probably OK for most sites.
MinSpareServers 1
MaxSpareServers 2
# Number of servers to start initially --- should be a reasonable ballpark
# figure.
StartServers 1
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
MaxClients 150
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies. The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources. On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For these platforms, set to something like 10000
# or so; a setting of 0 means unlimited.
# NOTE: This value does not include keepalive requests after the initial
# request per connection. For example, if a child process handles
# an initial request and 10 subsequent "keptalive" requests, it
# would only count as 1 request towards this limit.
MaxRequestsPerChild 0
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#Listen 3000
#Listen 172.18.4.13:80
# BindAddress: You can support virtual hosts with this option. This directive
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.
#BindAddress 172.18.4.13
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Please read the file README.DSO in the Apache 1.3 distribution for more
# details about the DSO mechanism and run `httpd -l' for the list of already
# built-in (statically linked and thus always available) modules in your httpd
# binary.
# Note: The order in which modules are loaded is important. Don't change
# the order below without expert advice.
# Example:
# LoadModule foo_module libexec/mod_foo.so
LoadModule mmap_static_module libexec/mod_mmap_static.so
LoadModule vhost_alias_module libexec/mod_vhost_alias.so
LoadModule env_module libexec/mod_env.so
LoadModule config_log_module libexec/mod_log_config.so
LoadModule agent_log_module libexec/mod_log_agent.so
LoadModule referer_log_module libexec/mod_log_referer.so
LoadModule mime_magic_module libexec/mod_mime_magic.so
LoadModule mime_module libexec/mod_mime.so
LoadModule negotiation_module libexec/mod_negotiation.so
LoadModule status_module libexec/mod_status.so
LoadModule info_module libexec/mod_info.so
LoadModule includes_module libexec/mod_include.so
LoadModule autoindex_module libexec/mod_autoindex.so
LoadModule dir_module libexec/mod_dir.so
LoadModule cgi_module libexec/mod_cgi.so
LoadModule asis_module libexec/mod_asis.so
LoadModule imap_module libexec/mod_imap.so
LoadModule action_module libexec/mod_actions.so
LoadModule speling_module libexec/mod_speling.so
LoadModule userdir_module libexec/mod_userdir.so
LoadModule alias_module libexec/mod_alias.so
LoadModule rewrite_module libexec/mod_rewrite.so
LoadModule access_module libexec/mod_access.so
LoadModule auth_module libexec/mod_auth.so
LoadModule anon_auth_module libexec/mod_auth_anon.so
LoadModule dbm_auth_module libexec/mod_auth_dbm.so
LoadModule digest_module libexec/mod_digest.so
LoadModule proxy_module libexec/libproxy.so
LoadModule cern_meta_module libexec/mod_cern_meta.so
LoadModule expires_module libexec/mod_expires.so
LoadModule headers_module libexec/mod_headers.so
LoadModule usertrack_module libexec/mod_usertrack.so
LoadModule example_module libexec/mod_example.so
LoadModule unique_id_module libexec/mod_unique_id.so
LoadModule setenvif_module libexec/mod_setenvif.so
LoadModule oprocmgr_module libexec/liboprocmgr.so
LoadModule define_module libexec/mod_define.so
LoadModule dms_module libexec/mod_dms.so
LoadModule perl_module libexec/libperl.so
LoadModule fastcgi_module libexec/mod_fastcgi.so
<IfDefine SSL>
LoadModule ssl_module libexec/mod_ssl.so
</IfDefine>
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# If your ServerType directive (set earlier in the 'Global Environment'
# section) is set to "inetd", the next few directives don't have any
# effect since their settings are defined by the inetd configuration.
# Skip ahead to the ServerAdmin directive.
# Port: The port to which the standalone server listens. For
# ports < 1023, you will need httpd to be run as root initially.
#Port 7777
#Listen 7777
#Port 80
#Listen 80
## SSL Support
## When we also provide SSL we have to listen to the
## standard HTTP port (see above) and to the HTTPS port
<IfDefine SSL>
# Port 80
Listen 172.18.4.13:80
Listen 172.18.4.13:443
</IfDefine>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
# . On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group nobody on these systems!
User ics3devl
Group ics3devl
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents.
ServerAdmin [email protected]
# ServerName allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e., use
# "www" instead of the host's real name).
# Note: You cannot just invent host names and hope they work. The name you
# define here must be a valid DNS name for your host. If you don't understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address (e.g., http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
# machine always knows itself by this address. If you use Apache strictly for
# local testing and development, you may use 127.0.0.1 as the server name.
ServerName 172.18.4.13
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/devl/ics3/devl/webroot/apache"
# Each directory to which Apache has access, can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# permissions.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/devl/ics3/devl/webroot/apache">
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
Options Indexes FollowSymLinks MultiViews
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo",
# "AuthConfig", and "Limit"
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.
<IfModule mod_userdir.c>
UserDir public_html
</IfModule>
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index. Separate multiple entries with spaces.
<IfModule mod_dir.c>
DirectoryIndex index.html index.jsp
</IfModule>
# AccessFileName: The name of the file to look for in each directory
# for access control information.
AccessFileName .htaccess
# The following lines prevent .htaccess files from being viewed by
# Web clients. Since .htaccess files often contain authorization
# information, access is disallowed for security reasons. Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files. If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#CacheNegotiatedDocs
# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name. With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
UseCanonicalName off
# Add 2003/1/3 test for dynamic virtyal host
# VirtualDocumentRoot /devl/ics3/moff/webroot/oc4j/ct/web/store/%1
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
<IfModule mod_mime.c>
TypesConfig /devl/ics3/moff/apache/mime.types
</IfModule>
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
<IfModule mod_mime_magic.c>
MIMEMagicFile /devl/ics3/devl/apache/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog /devl/ics3/devl/apache/logs/error_log
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
CustomLog /devl/ics3/devl/apache/logs/access_log common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog /devl/ics3/devl/apache/logs/referer_log referer
#CustomLog /devl/ics3/devl/apache/logs/agent_log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog /devl/ics3/devl/apache/logs/access_log combined
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
<IfModule mod_alias.c>
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/"..
Alias /icons/ "/oraapp/9iAS10220/home/Apache/Apache/icons/"
<Directory "/oraapp/9iAS10220/home/Apache/Apache/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
Alias /jservdocs/ "/oraapp/9iAS10220/home/Apache/Jserv/docs/"
Alias /soapdocs/ "/oraapp/9iAS10220/home/soap/"
Alias /perl/ "/oraapp/9iAS10220/home/Apache/Apache/cgi-bin/"
Alias /images/ "/devl/ics3/devl/webroot/apache/images/"
Alias /Fc/ "/devl/ics3/devl/webroot/apache/Fc/"
Alias /html/ "/devl/ics3/devl/webroot/apache/html/"
Alias /gftlist/ "/devl/ics3/devl/webroot/apache/gftlist/"
Alias /articles/ "/devl/ics3/devl/webroot/apache/articles/"
Alias /js/ "/devl/ics3/devl/webroot/apache/js/"
Alias /css/ "/devl/ics3/devl/webroot/apache/css/"
Alias /coremetrics/ "/devl/ics3/devl/webroot/apache/coremetrics/"
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "/devl/ics3/devl/webroot/apache/cgi-bin/"
ScriptAlias /cyber/ "/usr/cybercash/webroot/collectiblestodaytestsight-16/mck-cgi/"
# "/oraapp/9iAS10220/home/Apache/Apache/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/devl/ics3/devl/webroot/apache/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
<Directory "/usr/cybercash/webroot/collectiblestodaytestsight-16/mck-cgi">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
</IfModule>
# End of aliases.
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
# Directives controlling the display of server-generated directory listings.
<IfModule mod_autoindex.c>
# FancyIndexing is whether you want fancy directory indexing or standard
IndexOptions FancyIndexing
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
# If MultiViews are amongst the Options in effect, the server will
# first look for name.html and include it if found. If name.html
# doesn't exist, the server will then look for name.txt and include
# it as plaintext if found.
ReadmeName README
HeaderName HEADER
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
</IfModule>
# End of indexing directives.
# Document types.
<IfModule mod_mime.c>
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
# AddLanguage allows you to specify the language of a document. You can
# then use content negotiation to give a browser a file in a language
# it can understand.
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in quite
# some cases the two character 'Language' abbriviation is not
# identical to the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. But there is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Korean (kr) - Norwegian (no)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru)
AddLanguage da .da
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .ee
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage he .he
AddCharset ISO-8859-8 .iso8859-8
AddLanguage it .it
AddLanguage ja .ja
AddCharset ISO-2022-JP .jis
AddLanguage kr .kr
AddCharset ISO-2022-KR .iso-kr
AddLanguage no .no
AddLanguage pl .po
AddCharset ISO-8859-2 .iso-pl
AddLanguage pt .pt
AddLanguage pt-br .pt-br
AddLanguage ltz .lu
AddLanguage ca .ca
AddLanguage es .es
AddLanguage sv .se
AddLanguage cz .cz
AddLanguage ru .ru
AddLanguage tw .tw
AddCharset Big5 .Big5 .big5
AddCharset WINDOWS-1251 .cp-1251
AddCharset CP866 .cp866
AddCharset ISO-8859-5 .iso-ru
AddCharset KOI8-R .koi8-r
AddCharset UCS-2 .ucs2
AddCharset UCS-4 .ucs4
AddCharset UTF-8 .utf8
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
<IfModule mod_negotiation.c>
LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw
</IfModule>
# AddType allows you to tweak mime.types without actually editing it, or to
# make certain files to be certain types.
# For example, the PHP 3.x module (not part of the Apache distribution - see
# http://www.php.net) will typically use:
#AddType application/x-httpd-php3 .php3
#AddType application/x-httpd-php3-source .phps
# And for PHP 4.x, use:
#AddType application/x-httpd-php .php
#AddType application/x-httpd-php-source .phps
AddType application/x-tar .tgz
# AddHandler allows you to map certain file extensions to "handlers",
# actions unrelated to filetype. These can be either built into the server
# or added with the Action command (see below)
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
# To use CGI scripts:
#AddHandler cgi-script .cgi
# To use server-parsed HTML files
#AddType text/html .shtml
#AddHandler server-parsed .shtml
# Uncomment the following line to enable Apache's send-asis HTTP file
# feature
#AddHandler send-as-is asis
# If you wish to use server-parsed imagemap files, use
#AddHandler imap-file map
# To enable type maps, you might want to use
#AddHandler type-map var
</IfModule>
# End of document types.
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#MetaDir .web
# MetaSuffix: specifies the file name suffix for the file containing the
# meta information.
#MetaSuffix .meta
# Customizable error response (Apache style)
# these come in three flavors
# 1) plain text
#ErrorDocument 500 "The server made a boo boo.
# n.b. the single leading (") marks it as text, it does not get output
# 2) local redirects
ErrorDocument 404 /404error.htm
ErrorDocument 500 /500error.htm
# to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
# N.B.: You can redirect to a script or a document using server-side-includes.
# 3) external redirects
#ErrorDocument 402 http://some.other_server.com/subscription_info.html
# N.B.: Many of the environment variables associated with the original
# request will not be available to such a script.
# Customize behaviour based on the browser
<IfModule mod_setenvif.c>
# The following directives modify normal HTTP response behavior.
# The first directive disables keepalive for Netscape 2.x and browsers that
# spoof it. There are known problems with these browser implementations.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not properly
# support keepalive when it is used on 301 or 302 (redirect) responses.
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
# The following directive disables HTTP/1.1 responses to browsers which
# are in violation of the HTTP/1.0 spec by not being able to grok a
# basic 1.1 response.
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
</IfModule>
# End of browser customization directives
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your_domain.com" to match your domain to enable.
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from localhost web1-v3
</Location>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your_domain.com" to match your domain to enable.
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from localhost web1-v3
#</Location>
# There have been reports of people trying to abuse an old bug from pre-1.1
# days. This bug involved a CGI script distributed as a part of Apache.
# By uncommenting these lines you can redirect these attacks to a logging
# script on phf.apache.org. Or, you can record them yourself, using the script
# support/phf_abuse_log.cgi.
#<Location /cgi-bin/phf*>
# Deny from all
# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
#</Location>
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#<IfModule mod_proxy.c>
# ProxyRequests On
# <Directory proxy:*>
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
# </Directory>
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
# ProxyVia On
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
# CacheRoot "/oraapp/9iAS10220/home/Apache/Apache/proxy"
# CacheSize 5
# CacheGcInterval 4
# CacheMaxExpire 24
# CacheLastModifiedFactor 0.1
# CacheDefaultExpire 1
# NoCache a_domain.com another_domain.edu joes.garage_sale.com
#</IfModule>
# End of proxy directives.
### Section 3: Virtual Hosts
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.
# If you want to use name-based virtual hosts you need to define at
# least one IP address (and port number) for them.
# Use name-based virtual hosting.
#NameVirtualHost 12.34.56.78:80
#NameVirtualHost 12.34.56.78
#NameVirtualHost *
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#<VirtualHost *>
# ServerAdmin [email protected]_domain.com
# DocumentRoot /www/docs/host.some_domain.com
# ServerName host.some_domain.com
# ErrorLog logs/host.some_domain.com-error_log
# CustomLog logs/host.some_domain.com-access_log common
#</VirtualHost>
#<VirtualHost default:*>
#</VirtualHost>
## SSL Global Context
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
# Some MIME-types for downloading Certificates and CRLs
<IfDefine SSL>
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl .crl
</IfDefine>
<IfModule mod_ssl.c>
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is a internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog builtin
# Inter-Process Session Cache:
# Configure the SSL Session Cache: First either `none'
# or `dbm:/path/to/file' for the mechanism to use and
# second the expiring timeout (in seconds).
#SSLSessionCache none
#SSLSessionCache shm:/devl/ics3/devl/apache/logs/ssl_scache(512000)
SSLSessionCache dbm:/devl/ics3/devl/apache/logs/ssl_scache
SSLSessionCacheTimeout 300
# Semaphore:
# Configure the path to the mutual explusion semaphore the
# SSL engine uses internally for inter-process synchronization.
SSLMutex file:/devl/ics3/devl/apache/logs/ssl_mutex
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the
# SSL library. The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
#SSLRandomSeed startup file:/dev/random 512
#SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random 512
#SSLRandomSeed connect file:/dev/urandom 512
# Logging:
# The home of the dedicated SSL protocol logfile. Errors are
# additionally duplicated in the general error log file. Put
# this somewhere where it cannot be used for symlink attacks on
# a real server (i.e. somewhere where only root can write).
# Log levels are (ascending order: higher ones include lower ones):
# none, error, warn, info, trace, debug.
SSLLog /devl/ics3/devl/apache/logs/ssl_engine_log
SSLLogLevel warn
</IfModule>
<IfDefine SSL>
## SSL Virtual Host Context
<VirtualHost default:443>
# General setup for the virtual host
DocumentRoot "/devl/ics3/devl/webroot/apache"
ServerName 172.18.4.13
ServerAdmin [email protected]
ErrorLog /devl/ics3/devl/apache/logs/error_log
TransferLog /devl/ics3/devl/apache/logs/access_log
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
#SSLCipherSuite ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
# Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. A test
# certificate can be generated with `make certificate' under
# built time. Keep in mind that if you've both a RSA and a DSA
# certificate you can configure both in parallel (to also allow
# the use of DSA ciphers, etc.)
SSLCertificateFile /devl/ics3/devl/apache/ssl.crt/server.crt
#SSLCertificateFile /devl/ics3/devl/apache/ssl.crt/server-dsa.crt
# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
SSLCertificateKeyFile /devl/ics3/devl/apache/ssl.key/server.key
#SSLCertificateKeyFile /devl/ics3/devl/apache/ssl.key/server-dsa.key
# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convinience.
#SSLCertificateChainFile /devl/ics3/devl/apache/ssl.crt/ca.crt
# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
# Note: Inside SSLCACertificatePath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCACertificatePath /devl/ics3/devl/apache/ssl.crt
#SSLCACertificateFile /devl/ics3/devl/apache/ssl.crt/ca-bundle.crt
# Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded)
# Note: Inside SSLCARevocationPath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCARevocationPath /devl/ics3/devl/apache/ssl.crl
#SSLCARevocationFile /devl/ics3/devl/apache/ssl.crl/ca-bundle.crl
# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional, require and optional_no_ca. Depth is a
# number which specifies how deeply to verify the certificate
# issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth 10
# Access Control:
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
#<Location />
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)-/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>
# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that
# the standard Auth/DBMAuth methods can be used for access control. The
# user name is the `one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o CompatEnvVars:
# This exports obsolete environment variables for backward compatibility
# to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use this
# to provide compatibility to existing CGI scripts.
# o StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
# under a "Satisfy any" situation, i.e. when it applies access is denied
# and no other module can change it.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions FakeBasicAuth ExportCertData CompatEnvVars StrictRequire
<Files ~ "\.(cgi|shtml)$">
SSLOptions +StdEnvVars
</Files>
#<Directory "/oraapp/9iAS10220/home/Apache/Apache/cgi-bin">
<Directory "/devl/ics3/devl/webroot/apache/cgi-bin">
SSLOptions +StdEnvVars
</Directory>
# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't wait for
# the close notify alert from client. When you need a different shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed, i.e. no
# SSL close notify alert is send or allowed to received. This violates
# the SSL/TLS standard but is needed for some brain-dead browsers. Use
# this when you receive I/O errors because of the standard approach where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close notify
# alert of the client. This is 100% SSL/TLS standard compliant, but in
# practice often causes hanging connections with brain-dead browsers. Use
# this only for browsers where you know that their SSL implementation
# works correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown
# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
CustomLog /devl/ics3/devl/apache/logs/ssl_request_log \
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
</VirtualHost>
</IfDefine>
<IfModule mod_dms.c>
<Location /dms0>
SetHandler dms-handler
</Location>
</IfModule>
# Perl Directives
#PerlWarn On
#PerlFreshRestart On
#PerlSetEnv PERL5OPT Tw
#PerlSetEnv PERL5LIB "/oraapp/9iAS10220/home/Apache/perl/lib/5.00503:/oraapp/9iAS10220/home/Apache/perl/lib/site_perl/5.005"
SetEnv PERL5LIB "/oraapp/9iAS10220/home/Apache/perl/lib/5.00503:/oraapp/9iAS10220/home/Apache/perl/lib/site_perl/5.005"
PerlModule Apache
#PerlModule Apache::Status
PerlModule Apache::Registry
#PerlModule Apache::CGI
#PerlModule Apache::DBI
#PerlRequire
<Location /perl>
SetHandler perl-script
PerlHandler Apache::Registry
AddHandler perl-script .pl
Options +ExecCGI
PerlSendHeader On
</Location>
#<Location /perl-status>
# SetHandler perl-script
# PerlHandler Apache::Status
# order deny,allow
# deny from all
# allow from .your_domain.com
#</Location>
# Setup of oprocmgr module.
# This directive identifies each remote apache instance that will be
# sending requests to processes (e.g., JServs), managed by local Apache
# instances. This directive is used by the local process manager to share
# routing information with remote apache instances via non-SSL HTTP messages.
# The directive is repeated for each remote apache instance that will be
# sending requests. The ProcNode directive that refers to the local apache
# instance will be ignored, but may be supplied to facilitate uniformity
# in configuration across apache instances. Arguments to the ProcNode must
# be sufficient to reach the remote instance of apache via non-SSL HTTP
# messages. It is not considered an error if the remote apache instance is
# unreachable, as no assumption is made about the starting order or
# availability of apache instances.
# Syntax: ProcNode <hostname> <port>
# Example: ProcNode abc.com 7777
<IfModule mod_oprocmgr.c>
ProcNode web1-v3 7777
<IfDefine SSL>
ProcNode web1-v3 80
</IfDefine>
<Location /oprocmgr-service>
SetHandler oprocmgr-service
</Location>
<Location /oprocmgr-status>
SetHandler oprocmgr-status
</Location>
</IfModule>
# Setup of FastCGI module
<IfModule mod_fastcgi.c>
Alias /fastcgi/ "/devl/ics3/devl/webroot/apache/fastcgi/"
ScriptAlias /fcgi-bin/ "/devl/ics3/devl/webroot/apache/fcgi-bin/"
<Directory "/devl/ics3/devl/webroot/apache/fcgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
SetHandler fastcgi-script
<IfDefine SSL>
SSLOptions +StdEnvVars
</IfDefine>
</Directory>
</IfModule>
<IfModule mod_proxy.c>
proxyRequests off
proxyPass /cust http://172.18.4.13:7778/cust
proxyPassReverse /cust http://172.18.4.13:7778/cust
proxyPass /ct http://172.18.4.13:7778/ct
proxyPassReverse /ct http://172.18.4.13:7778/ct
</IfModule>
#<IfModule mod_proxy.c>
# proxyRequests on
# proxyPass /ct http://172.18.4.13:7778/ct
# proxyPassReverse /ct http://172.18.4.13:7778/ct
#</IfModule>
# Include the configuration files needed for jserv
include "/oraapp/9iAS10220/home/Apache/Jserv/etc/jserv.conf"
ApJServMount / /ct
AddType text/jsp .jsp
AddHandler jserv-servlet .jsp
# Include the Oracle configuration file for custom settings
#include "/devl/ics3/devl/apache/oracle_apache.conf"
<VirtualHost 172.18.4.13:80>
ServerName ics3dv1ws1.hq.bradgroup
DocumentRoot /devl/ics3/devl/webroot/apache
ServerAlias www.ics3dv1ws1.hq.bradgroup
</VirtualHost>
# <VirtualHost 172.18.4.13:80>
ServerName %1.collectiblestoday.com
VirtualDocumentRoot /devl/ics3/devl/webroot/oc4j/ct/web
# </VirtualHost>Weird ... that works.
So, I created the dummy account which was also failing as follows:
create user newuser identified by oracle;
grant developer_role to newuser;This fails, but only from a Form running under OC4J, until I run:
ALTER SYSTEM SET sec_case_sensitive_logon = FALSE scope = MEMORY;While I've made this change in our development database, I don't really want to do the same eventually in PROD. I'd rather figure out what's changed about how OC4J connects, find a rememdy there, and set this back to TRUE.
Since I didn't create the username or password as a string literal (to ensure lowercasing), I'm confused as to what's happening. When the init parm is set to TRUE, when the dialog box pops up for the form after the invalid username/password error, I tried entering the password in all lowercase, and then in all uppercase, to no effect. Both fail.
--=Chuck -
Hi All,
I want to be able to run my tomcat3.3.1a under apache webserver, and i klnow i have to use mod_jk. The problem i am having is that my tomcat is not producing the mod_jk.conf_auto file.
I have even added the apacheconfig directive to server.xml but the file is not being generated.
Any ideas anyone on how i can get this file generated.
Thanks in advance
SajidI've tried the instructions from http://www.webmasterbase.com/article.php?pid=52&aid=305, and it's OK.
-
How to run JSP/Servlet applications on Apache?
As we all know that tomcat is an JSP/Servlet engine. Apache is a web server not a JSP/Servlet enabled web server. Then in order to run JSP/Servlet applications on Apache web server on unix, what should I do?
Thanks.
James LiuCan you give me some detailed information about how to combine Apache and Tomcat? Note, the application is going to run on Sun Solaris Operating System.
By the way, where do you put your final version of application? on windows or on Unix? on tomcat or on apache?
I am building the application using tomcat on windows, but now I almost finished the application, so I decide to move it to Unix which uses apache as the web server. But I got problems, the Servlet engine (JServ) can not understand "RequestDispatcher" (an object used to redirect jsp pages).
Help please.
James -
Unable to run JSP file in TOmcat
My Tomcat is running when i type http://localhost:8080/index.jsp , i'm able to see home page
CLASSPATH=C:\j2sdk1.4.2_08\bin;E:\Grinder;E:\Grinder\lib\grinder.jar;C:\Program Files\Java\j2re1.4.2_08\lib\grinder.jar;
JAVA_HOME=C:\j2sdk1.4.2_08
I tried both pointing to JAVA_HOME C:\Program Files\Java\j2re1.4.2_08
When i try to run the JSP file under C:\Tomcat 5.0\webapps\ROOT\add.jsp. I'm getting following error.
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP
org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:97)
org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:346)
org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:414)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:472)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:451)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:439)
org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:511)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:295)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
root cause
Unable to find a javac compiler;
com.sun.tools.javac.Main is not on the classpath.
Perhaps JAVA_HOME does not point to the JDK
org.apache.tools.ant.taskdefs.compilers.CompilerAdapterFactory.getCompiler(CompilerAdapterFactory.java:106)
org.apache.tools.ant.taskdefs.Javac.compile(Javac.java:935)
org.apache.tools.ant.taskdefs.Javac.execute(Javac.java:764)
org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:382)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:472)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:451)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:439)
org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:511)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:295)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)I know the same.
But problem is that whenever I am creating a new file containing single line say 'Hello world' and then try to run,
the similar type of error msg comes. -
I am trying to run a DbServlet under Apache using Oracle's OJSP. Now, the problem is that, when I try invoking the DbServlet using http://localhost/servlets/DbServlet1, I get an "Unfound.." error.
Also, trying to use the useBean tag results in ClassNotFound error. Please help me..I compile the class and place it under the packeage directory in my servlets repository, but it does work!!!With regards to your JSP issue. The JSP 1.0 specification doesn't define any locations where the JSP implicitly picks up dependent classes. In JSP 1.1, a deployment descriptor is defined that allows this information to be specified on an application basis. They further have adopted a convention of placing a WEB-INF directory in the applicaiton root that contains one or both of the following subdirectories: lib and classes. Application beans are placed here. In the lib directory if they live in a .jar file, else in the classes directory.
Oracle JSP anticipated this convention and implicitly adds classes/jar files in these locations to your applications classpath. So, to make your page work you must either:
a) add the class/bean explicitly to your classpath
b) move the class/bean to the application's WEB-INF/classes or WEB-INF/lib directory -- note in JSP 1.0 the application is equal to the server document root.
For more information on this please look at Chapter 4 of the Oracle JSPs Developers Guide available as part of you download or online on technet.oracle.com. You can also look at any of the lottery samples included in the download as a guide/sample (Note: these samples use the Oracle globals.jsa extension to root the application beneath the server root). -
Hi,
While running JSP page in weblogic I am getting following error.
java.lang.NullPointerException
at java.util.Hashtable.put(Hashtable.java:396)
at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl.setProperty(SAXParserImpl.java:395)
at weblogic.xml.jaxp.WebLogicSAXParser.setProperty(WebLogicSAXParser.java:117)
at weblogic.xml.jaxp.RegistrySAXParser.setProperty(RegistrySAXParser.java:117)
at org.apache.axis.encoding.DeserializationContextImpl.parse(DeserializationContextImpl.java:246)
at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:538)
at org.apache.axis.Message.getSOAPEnvelope(Message.java:376)
at org.apache.axis.serviceContext.ServiceContext.updateImplicitHeader(ServiceContext.java:269)
at com.cognos.developer.schemas.bibus._3.ContentManagerServiceStub.query(ContentManagerServiceStub.java:4907)
at jsp_servlet._pages.__viewreports._jspService(__viewreports.java:166)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:380)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:298)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3153)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1973)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1880)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1310)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
I am using jdk1.5. And I am using this jsp page for cognos connection.swattiii.....yaar..u are tring to put a null value inside hashtable..prbly u are doing this in ur jsp......
send ur jsp code -
Hi, can any one know how to run .jsp application in weblogic 8.1
hi,
i am using weblogic 8.1 ,
in weblogic 6.1 and 7.0 there is directory called default web apps under bea\user projects\application.we placed all .jsp file under here.
now bea deleted this folder.
now how to set of environment for run .jsp application using weblogic8.1
can one may help thanks,
jp reddyhi,
i solve this one after check bea documnetaion.
with regards
jp -
_pages does not exist running jsp on Linux
Hi
Wrote some jsp's and was running them using iAS 8i on Win 2000. I've now come to move them to their new home on a Linux machine running redhat and I get the following error:
Request URI:/dbserv/ds.jsp
Exception:
java.lang.IllegalArgumentException: Repository /dbserv/_pages does not exist!
I've setup the conf files as per "Running Oracle JSP on Apache", but I cannot understand what I've setup differently.
Also I read somewhere that pages defaults to the document root so I placed an empty pages directory into the document root I've specified in the the virtual host section. Still no luck.
Has anyone seen anything similar?
Thanks
Nicole
nullAny luck on this issue, I have the same problem ?
-
How to setup my computer to run JSP and Servlets
I want to setup my computer to run JSP and Servlets.
What kind of Servers and other tool i need to install to run JSP and Servlets.
Plz, Help me to start my work on JSP.
Regards,
Usman Alihello
JSP and servlet is web programming, may be little bit different to development local application.
1st, you should have two computers: one is server and the other is local workstation. This server should have a static IP address, that other people can go into your server. Workstation is any computer normal you use it.
2nd, you need to setup your server in: OS(linux or windows 2000), web server (jrun, apach or Tomcat etc. ), as well as install JDK, servlet.
3rd, your local workstation just use as programming editor and open a browser to testing, anytime you write your code, then ftp to server to test.
Reality, you have many technical thing to solve, eg setup web server etc. However, you can write your source code and test it, then open to outside people.
hope to helpness, if anything don't uderstand, you can post again or send email to me [email protected] Since I just have setup this configuration in my university for my project. -
I downloaded Tomcat and I installed. I set the JAVA_HOME and CATALINA_HOME variables to the appropriate values. I have the j2sdk1.4.1_01 installed. Although the http:localhost:8080/ is opening after that I do not know quite how I can run the examples.
I put a .jsp file in the webapps\ROOT and I tried to run it through IE with the URL
http://localhost/name.jsp as I read in a tutorial.
Is it wrong?It does not working anyway.
What can I do and how I can run jsp examples???
Please answer me...Do one thing put all your jsp files in a directory like my directory name is Jignesh, then it will be created in
C:\Program Files\Apache Tomcat 4.0\webapps\Jignesh
now to run any JSP file
you should write in address bar
http://localhost:8080/Jignesh/filename.jsp
and your tomcat must be running at that time. ok. hope this will help you. -
Issues running JSP using Tomcat
Hello,
I have installed Eclipse 3.0, Tomcat 5.0 with JDK 1.4.2 . I can view HTML pages but not JSP pages. I am able to run java code and servlets on Eclipse/Tomcat. When I point to a JSP page the page gives the following error
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP
org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:97)
org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:346)
org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:434)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:492)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:471)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:459)
org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:511)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:295)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
root cause
Unable to find a javac compiler;
com.sun.tools.javac.Main is not on the classpath.
Perhaps JAVA_HOME does not point to the JDK
org.apache.tools.ant.taskdefs.compilers.Compile
Any help is much appreciated.Like the message says, you haven't set the JAVA_HOME variable correctly.
Have you set it?
It should point to the ROOT of your java install
eg
JAVA_HOME = c:\j2sdk1.4.2_04
Are you running Tomcat through Eclipse, or on its own? -
Returning database query results under Apache Axis
I'm trying to write a web service that will return the results of a standard database query. Does anyone have any pointers on what sort of data structure I should convert my ResultSet to that would be best suited to run under Apache Axis? Currently I am trying to use a String[][][], which Axis can serialize and encode fine, but seems to have problems decoding. If someone has some client-side source that is able to receive a String[][][], please post it, as I would rather not have to change the web services around if at all possible.
According to IBM, the best way to do this is by returning an array of a complex type. Using this idea, I changed my services to return an array of DBRow objects, which I wrote for this purpose. DBRow is a simple class that contains a single private String[] with get and set accessors, in accordance with the JavaBeans standard. If you need more details, just respond to this topic.
-
How I can run servlets in Apache 1.3.2.7
hi i am using JSP as Interface..and Servlets as controller...
also Using Apache Httpd server,verion is 1.3.2.7
plz tell me how i can use apache to run my servlets.
Rahul.To run servlets in Apache you need the mod_jk module. But as the previous post, it is better to use Tomcat and putting both, Apache and Tomcat, working together. Tomcat will serve all the java related things, and the Apache, the html, php, etc.
Maybe you are looking for
-
sprint shouldnt have locked the sim tray anyways and i think this is just wrong because i payed for the phone and should be able to do what i want with it. they say you can unlock the sim card or the tray i guess if you in good standings with the com
-
I lost my ipod, can I flag the iPod? And how can I see if it has been flagged?
please help!!
-
Hey...... how's it going. I have Itunes 7.0.4 and my music app is significantly glitched for several different artists. First off, the artist A$AP Rocky appears in two different columns for no notable reason. The files are connected and they'll both
-
Quicktime seems to be showing FPS in to the top right corner of any media
Glitchy stuff happening last couple of days. Any files I play in Quicktime are showing a yellow/red number in the top right corner while I play them. I assume this is frames per second display. The question is: Why the heck is this happening? The sam
-
I am having trouble linking two queries in my data table. The first query finds the maximum of a certain set of information, has the breakorder set at asending and orders them by a set of numbers in that query. A coordinate (ie. x and y) field is bas