Run multiple apps from one browser windows with 9ias r2

We are running 9ias r1 with forms 6i as our production server. Users are able to access one html page with multiple links to their applications. They can run one application, keep it running, navigate back to the html page and run a second application.
We are testing 9ias r2 with forms 9i, but when users try to navigate back to the html page to run the second application the first application closes.
Is there a way to have 9ias r2 work the same as r1 and allow users to run multiple application from one html page?

Hi,
Thank you for posting in Windows Server Forum.
You can take rdp of server 2012 R2 from Fedora Linux desktop by running Yum command or Gnome rdp support. Please check below article for information.
1. How to Use Remote Desktop (rdesktop) in Redhat/Fedora/CentOS
2. Remote desktop from Linux to windows using rdesktop and gnome-rdp
3. XRDP Installation: An Easy Remote Desktop Setup for Linux
Note:
Microsoft is providing this information as a convenience to you.
The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Hope it helps!
Thanks.
Dharmesh Solanki

Similar Messages

Run multiple VI from one VI...

Hi,
How can I do to run multipe VIs from one VI ?
I can start one of them but I have to stop it before run an other one.
Thanks.

You are not very clear on your needs. In my particuliar case I have 12 separate VI running within a subpanel. Attached contains the VI. They are independent yet dependent on each other.
Message Edited by Joseph Loo on 11-21-2007 12:57 PM
Attachments:
Vi_ref.png ‏14 KB
EquiP-Display.png ‏47 KB
front_panel.png ‏28 KB

How to run multiple reports From One Form with 1 report object?

Hi ALL!
i want to run multiple reports (in 10g technology) from 1 Form having only 1 report object.
i.e
IF parameter=yes THEN
Rpt_new should run
Else
Rpt_old should run
END IF;
How can i do this?
thanks
rana

Rana,
I found this in the Forms online Help. You could easily found it yourself. Don't be afraid of pressing CTRL-H:
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME, 'yourreportsfilename.rdf')Regards,
Martin Malmstrom

General Failure - Running DBASE App from Netware on Windows

Hi all,
Our company database is coded in DBASE 5 and is hosted on Novell Netware 6.5 servers.
Our users have always used MS DOS PC's with the novell client to run the application but recently we have began testing the application running under windows XP CMD prompt after connecting using Novell Client.
For the most part everything works however we are experiancing a problem on XP that doesn't exist when run on the MS DOS PC's.
Basically when the app tries to run the DBASE USE / FILE commands on a file that the user doesn't have access too a general failure (CANCEL, IGNORE, RETRY) is shown. Strangely if the user hits CANCEL / IGNORE the correct result is returned e.g. FILE returns .F.
The above problem doesn't occur on MS DOS!
After testing it seems that the windows PC somehow 'knows' the file is there and tries to access it and then fails - could this be the case?
Other windows commands such as DIR / MOVE etc return "A device attached to the system is not functioning"
Any ideas on any settings we can change to prevent this from happening?
Thanks
Robbie

Robbiecookie101,
> Just to add to this. I have done some more checks and it definitely
> seems that the system knows there is a file there even though i have no
> rights to it. If i try to use a file in dbase file in a subdirectory i
> do not have rights to, i get the general failure error. If i do the same
> to a file that doesn't exist in the same directory then i get the
> standard file does not exist error. Is there some way that the client
> knows that there are files there even though i do not have rights to
> them and they do not show in a a dir?
The reason why you cannot access it is because another client has opened
it and has exclusive access to it. In the old days you had to flag such
files as "shareable" with the flag command, but I have not had to use that
for decades..
Anders Gustafsson (NKP)
The Aaland Islands (N60 E20)
Have an idea for a product enhancement? Please visit:
http://www.novell.com/rms

Running Multiple Workflows from One Main Workflow

So I am new to using the Automator, so I might be going about this the hard way. Any help would be great!
I have created individual workflows that copy folder content from my desktop to a folder on a server. There are multiple ones, because they are going to different locations on the server. I'm trying to set up a workflow that will run all of the workflows that I have saved in the same folder. But I'm not sure that I can run a workflow using variables.
Right now I have a different one set up where I manually select each workflow file, but I am hoping to automate this.

Download the following workflow action. This should work.
You can also layout for me exactly what you are trying to achive and I can help you put the worfklow together.

HT2090 hello, my eyesight issue happens occasionally, from time to time i run multiple apps that use the isight camera. when i close each app the isight camera's green light is still active. When that happens the only way to stop the isight camera is to r

hello, my eyesight issue happens occasionally, from time to time i run multiple apps that use the isight camera. when i close each app the isight camera's green light is still active. When that happens the only way to stop the isight camera is to reboot.
Is there a way to use activity monitor to identify and kill the process controlling the isight? My apologies in advance if this sounds windows (task manager) like.
Thanks

tqtclipper wrote:
hello, my eyesight issue happens occasionally, from time to time i run multiple apps that use the isight camera...
http://support.apple.
com/kb/HT2411: Your camera can be used by only one application at a time.
(Over time, Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD." Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
tqtclipper wrote:
... Is there a way to use activity monitor to identify and kill the process controlling the isight? ...
http://support.apple.
com/kb/PH5147: You can quit any process you can see in those listed in the window that opens when you use Activity Mornitor's
Window >
Activity Monitor
menu command.
Message was edited by: EZ Jim
Mac OSX 10.8.3

Return multiple columns from an analytic function with a window

Hello,
Is it possible to obtain multiple columns from an analytic function with a window?
I have a table with 4 columns, an id, a test id, a date, and the result of a test. I'm using an analytic function to obtain, for each row, the current test value, and the maximum test value in the next 2 days like so:
select
id,
test_id,
date,
result,
MAX ( result ) over ( partition BY id, test_id order by date RANGE BETWEEN CURRENT ROW AND INTERVAL '2' DAY FOLLOWING ) AS max_result_next_two_day
from table
This is working fine, but I would like to also obtain the date when the max result occurs. I can see that this would be possible using a self join, but I'd like to know if there is a better way? I cannot use the FIRST_VALUE aggregate function and order by result, because the window function needs to be ordered by the date.
It would be a great help if you could provide any pointers/suggestions.
Thanks,
Dan
http://danieljamesscott.org

Assuming RESULT is a positive integer that has a maximum width of, say 10,
and assuming date has no time-component:
select
   id
,test_id
,date
,result
,to_number(substr(max_result_with_date,1,10)) as max_result_next_two_day
,to_date(substr(max_result_with_date,11),'YYYYMMDD') as date_where_max_result_occurs
from (select
        id
       ,test_id
       ,date
       ,result
       ,MAX(lpad(to_char(result),10,'0')||to_char(date,'YYYYMMDD'))
           over (partition BY id, test_id
                 order by date
                 RANGE BETWEEN CURRENT ROW AND INTERVAL '2' DAY FOLLOWING )
        AS max_result_with_date
      from table)

HT4505 I have 4 accounts on my Mac Pro running Mavericks. From one account I can scan with my Epson NX420, but the other three accounts do not see the scanner. Can print from all accounts.

Sorry, I was not given the option of posting to a Maverics community. I have 4 accounts on my Mac Pro running Mavericks. From one account I can scan with my Epson NX420, but the other three accounts do not see the scanner. Can print from all accounts.

Hi there Ira Fletcher,
I would recommend taking a look at the troubleshooting steps found in the article below. Note: While the article was written for printer issues, many of the same troubleshooting steps apply to scanners as well.
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
-Griff W.

Load balancing 10g forms - Connection from new browser window not supported

Load balancing 10g forms - Connection from new browser window not supported
We're experimenting with using webcache to load balance between multiple applications servers running OC4J forms processes.
We currently have one machine with infrastructure and mid-tier (BI & Forms) installed, which is being used for the webcache functionality, this is load balancing between 2 other servers each of which just have the mid-tier (BI & Forms) installation
In order to get this to work, I had to follow the instructions in the Forms deployment guide : http://download-uk.oracle.com/docs/cd/B14099_11/web.1012/b14032/tuning.htm#sthref707
The main gist of this is that you need to set the following in the orion-web.xml file in order that the sessions are maintained:
<session-tracking
cookies="enabled">
</session-tracking>
This all works fine in most cases.
The problem I am having is if I do one of the following on the client machine:
1) From IE6 / IE7 run a copy of a forms application. Then open a new window using the "New Window" menu option, and attempt to run another forms application.
2) In IE7 or Firefox 2.0 open a copy of the forms application, and then open a new tab and try and open another forms application.
If I try either of these I get a FRM-92101 error, and the following is displayed in the java console:
oracle.forms.net.ConnectionException: Connection from new browser window not supported
From trawling various forums (including metalink and otn) it looks like a problem with the way coockies are handled.
Unfortunately the usual workaround is to ensure that the session tracking option in the orion-web.xml file is disabled.
The problem is that I need this enabled in order for the load balancing to work.
Does anyone know of any other workarounds or patches that might help resolve this?
We're using Application server 10.1.2.0.2 running on windows 2003 servers.

You were right. Carriage returns were stopping it from working (the document is laid out over separate lines, so I assumed it would make no difference...).
I've now managed to get it so the forms at least run, but they are all being run in the forms OC4J instance on the same machine as the OHS.
Has anyone actually managed to get this to work, or am I doing something wrong?
I did wonder if using an OHS instance on a machine with no forms installation would make any difference?
I had raised a support call via metalink on this subject, but they eventually came to the conclusion that the only way to do this is with a hardware load balancer (Despite several documents suggesting that webcache is the way to go (including the forms deployment manual)).
I'm at the point now of giving up and writing some custom scripts to do the job instead...

Add to Multiple Tables from One Page

Hello,
I am building an application that handles hardware inventory (APEX 4.0). I have an input page that adds data to two or more tables all at once. The page has two forms on it that point to two separate tables. However when I try to run the page, it fails and returns an error:
ORA-06550: line 1, column 437: PL/SQL: ORA-00904: "ORH_LAST_UPDATE_DATE": invalid identifier ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
     Error      Unable to process row of table IDD_ID_DATA.
So far as i can see within the App, that column is not at issue (I am not even doing anything to it and it is nullable). I have looked into the App itself as well as doing some online research but have found nothing helpful...
So my question is this: Is it possible to add to multiple tables from one page? If so how do I do it?
I am new to APEX so any help would be greatly appreciated!

UPDATE:
I received an email from the APEX Support Team:
"The simple answer is that you will need to manually code the DML (and query) processes if you wish to maintain multiple tables from one page (There is a limit of one table when using the built-in processes).
In order to do this I suggest you delete the processes generated by the wizards and create PL/SQL processes with insert, update, delete statements as necessary. Such coding is not difficult but is more time consuming than when you can use built-in processes."
I have been playing around with PL/SQL code and the end result is this:
begin
     INSERT INTO table1
     VALUES(
          :P2_Item_Field1,
          :P2_Item_Field2);
     INSERT INTO table2
     VALUES(
          :P2_Item_Field1,
          :P2_Item_Field2);
end;
I used this code in a custom PL/SQL Process in the Processing>Processes section of Page Processing and it seems to work fine now. The only downside to this method is if the name of a Page Item is changed the code will also have to be changed. Other than that i have had no problems.

How do i move an app from one page to another

how do i move an app from one page to another? When I upgraded to the latest software on my 4s, the camera went to the last page rather than remaining on the home page

What Rudegar says is true, but it's a lot easier to rearrange icons in iTunes:
Connect your phone and open iTunes.
Click on the Apps tab.
You will see your home screen in the main window, with the other screens in a scrollable column on the right. Scroll down and click on the last page to put it in main window.
Now scroll the column so the home page is visible on the right.
Click on the Camera and drag it onto the home page at the right.
Be careful not to accidentally insert it into another app, thereby creating a group.

Can you transfer apps from one Mac to another?

I have both a desktop Power PC G5 running Mac OS X Tiger (10.4.11) on which I sync my iPod Touch and have all my apps, movies etc. I also have an Intel MacBook Pro running Leopard (with no link to the iPod Touch). If I buy an iPad, how do I sync the apps/movies I've either paid for or downloaded free? I see in the tech spec for the iPad says that it is only compatible with Mac 10.5 onwards. So it possible to transfer the apps from one machine (desktop) to the other (laptop) and then sync with the iPad, and what do you have to do? Thanks, in advance, for your help on this one.

You go to your original Mac and Deauthorise the computer, then you go to your nw computer and re-authorise it with he same iTunes account and you should be able to download all your Apps again for free.
Syncing will of course delete all the media content on the iPad and replace it with the media content from the newer computer so you may wish to move your library at the same time.

How do I move apps from one page to another?

How do I move apps from one page to another?

From a previous thread:
Touch and hold any icon for a couple of seconds. They'll all start to wobble. Touch and drag the one you want to move to the side of the screen and the next screen will appear; drop the icon on whatever screen you want it on.
You can also do it quicker in iTunes - connect the phone and click the Apps tab in the main window. You'll see a picture of your phone with the apps laid out. Just click and drag

Unable to transfer purchased apps from iphone to window 7

I tried all the solution which been offered from apple support but i still unable to transfer purchased apps from iphone to window 7. Please show me what to do =(

Are you trying to transfer apps to Windows 7 to USE them on Windows 7, or to back up your iPhone? iPhone apps will not run on Windows (OR Mac OS X); they only run on the iPhone, iPod Touch, and iPad.
To back up your iPhone, connect the phone to your computer using the cable that came with the phone and a USB port directly on the computer, not a hub. Do not sync.
Check the account you have on your iPhone by going to Settings/Store. Make sure you are logged in to this same account on your computer, and that the computer is Authorized to this account (check the Store menu).
Go to the File Menu in iTunes and choose "Transfer Purchases".
If you have a problem with any of these steps please let us know exactly what the problem is.

Keeping all pages in one browser window

I'm trying to figure out how to have all of my pages for my
site open under one browser window instead of opening up a new
window when each button is clicked.
I built Flash buttons for the pages and they work fine...I'm
new at this and haven't figured out how to get the pages to open up
in the main (index.html) browser window. I've tired doing it using
the Add Behaviors, GoToURL selection but it doesn't work...also the
only selection that appears is Main Window*, and I don't know what
the * signifies. I'm sure that this is simple...help please!

> I built Flash buttons for the pages and they work fine
Does the page use Frames?
http://livedocs.adobe.com/flash/9.0/main/00001180.html
note this paragraph:
Security note: In Flash Player 9 and later, when code in a
SWF file that is
running in the local-with-filesystem sandbox calls the
getURL() function and
specifies a custom window name for the window parameter, the
window name is
transfered into a random name. The name is in the form
"_flashXXXXXXXX",
where each X represents a random hexadecimal digit. Within
the same session
(until you close the containing browser window), if you call
the function
again and specify the same name for the window parameter, the
same random
string is used.
so, targeting named frames is effectively broken when viewing
local files
AFAIK.
They should work as intended when uploaded to a server.
If that's not it, url address to the uploaded page please.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Run multiple apps from one browser windows with 9ias r2

Similar Messages

Maybe you are looking for