Run multiple VI from one VI...

Hi,
How can I do to run multipe VIs from one VI ?
I can start one of them but I have to stop it before run an other one.
Thanks.

You are not very clear on your needs. In my particuliar case I have 12 separate VI running within a subpanel. Attached contains the VI. They are independent yet dependent on each other.
Message Edited by Joseph Loo on 11-21-2007 12:57 PM
Attachments:
Vi_ref.png ‏14 KB
EquiP-Display.png ‏47 KB
front_panel.png ‏28 KB

Similar Messages

Run multiple apps from one browser windows with 9ias r2

We are running 9ias r1 with forms 6i as our production server. Users are able to access one html page with multiple links to their applications. They can run one application, keep it running, navigate back to the html page and run a second application.
We are testing 9ias r2 with forms 9i, but when users try to navigate back to the html page to run the second application the first application closes.
Is there a way to have 9ias r2 work the same as r1 and allow users to run multiple application from one html page?

Hi,
Thank you for posting in Windows Server Forum.
You can take rdp of server 2012 R2 from Fedora Linux desktop by running Yum command or Gnome rdp support. Please check below article for information.
1. How to Use Remote Desktop (rdesktop) in Redhat/Fedora/CentOS
2. Remote desktop from Linux to windows using rdesktop and gnome-rdp
3. XRDP Installation: An Easy Remote Desktop Setup for Linux
Note:
Microsoft is providing this information as a convenience to you.
The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Hope it helps!
Thanks.
Dharmesh Solanki

How to run multiple reports From One Form with 1 report object?

Hi ALL!
i want to run multiple reports (in 10g technology) from 1 Form having only 1 report object.
i.e
IF parameter=yes THEN
Rpt_new should run
Else
Rpt_old should run
END IF;
How can i do this?
thanks
rana

Rana,
I found this in the Forms online Help. You could easily found it yourself. Don't be afraid of pressing CTRL-H:
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME, 'yourreportsfilename.rdf')Regards,
Martin Malmstrom

Running Multiple Workflows from One Main Workflow

So I am new to using the Automator, so I might be going about this the hard way. Any help would be great!
I have created individual workflows that copy folder content from my desktop to a folder on a server. There are multiple ones, because they are going to different locations on the server. I'm trying to set up a workflow that will run all of the workflows that I have saved in the same folder. But I'm not sure that I can run a workflow using variables.
Right now I have a different one set up where I manually select each workflow file, but I am hoping to automate this.

Download the following workflow action. This should work.
You can also layout for me exactly what you are trying to achive and I can help you put the worfklow together.

Running multiple instances from same oracle home

Hi Gurus,
I am preparing for OCA 11g examination. I had a question about running multiple instances from same oracle home. While reading the book I came across a statement about database control which says "If there are several database instances running off the same Oracle home, then each will have its own Database Control instance".
Now I assume that this statement implies multiple instances accessing the same physical database (which as per my knowledge can happen only in case of a RAC).
I am not able to understand how exactly can you have multiple database instances in a single oracle home. I have installed Oracle 11g on my computer whose oracle home is +"D:\oracle\product\10.2.0\db_1"+; now this directory houses all the binaries (executables and folders like admin,bin, etc) for the oracle instance that I have installed (the instance name is ocp1). Now if I am to install or create another Oracle Instance (say ocp2) in the same home, wont there be a conflict of binaries of the two instances in the same home ?
Basically,it makes sense if db_1 folder is further split into multiple folders, one for each instance (for example, one for ocp1 & one for ocp2); each of these folders will then contain the binary files, libraries,etc for its own instance; but, this is not the case, here db_1 houses all the binaries directly under it ...
The other question which stems from the statement I mentioned above is that if having multiple instances running from same oracle home accessing the same physical database, can this arrangement be called RAC at all; or does RAC dictate that you cannot have multiple instances that are accessing the same database have to be installed on physically separate machines and so you cannot have two RAC instances (accessing same physical database) installed on the same computer ??
I hope my questions are not too much confusing ... !!
Cheers,
Sudripta

Hello,
"If there are several database instances running off the same Oracle home, then each will have its own Database Control instance".This is true, and also means each instance will have its separate database (i.e. dbf files etc.) & separate DB Control. Usually in this case you create several instances on the same node.
Now I assume that this statement implies multiple instances accessing the same physical database (which as per my knowledge can happen only in case of a RAC).You are correct about RAC where several instances (usually running on separate nodes) access the RAC.
More info:
1 Oracle Home - 1 Database - 1 SID is possible.
1 Oracle Home - Many Databases - Many SID is possible.
1 Oracle HOme - 1 Database - Multiple SID is possible and this is called RAC.

Add to Multiple Tables from One Page

Hello,
I am building an application that handles hardware inventory (APEX 4.0). I have an input page that adds data to two or more tables all at once. The page has two forms on it that point to two separate tables. However when I try to run the page, it fails and returns an error:
ORA-06550: line 1, column 437: PL/SQL: ORA-00904: "ORH_LAST_UPDATE_DATE": invalid identifier ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
     Error      Unable to process row of table IDD_ID_DATA.
So far as i can see within the App, that column is not at issue (I am not even doing anything to it and it is nullable). I have looked into the App itself as well as doing some online research but have found nothing helpful...
So my question is this: Is it possible to add to multiple tables from one page? If so how do I do it?
I am new to APEX so any help would be greatly appreciated!

UPDATE:
I received an email from the APEX Support Team:
"The simple answer is that you will need to manually code the DML (and query) processes if you wish to maintain multiple tables from one page (There is a limit of one table when using the built-in processes).
In order to do this I suggest you delete the processes generated by the wizards and create PL/SQL processes with insert, update, delete statements as necessary. Such coding is not difficult but is more time consuming than when you can use built-in processes."
I have been playing around with PL/SQL code and the end result is this:
begin
     INSERT INTO table1
     VALUES(
          :P2_Item_Field1,
          :P2_Item_Field2);
     INSERT INTO table2
     VALUES(
          :P2_Item_Field1,
          :P2_Item_Field2);
end;
I used this code in a custom PL/SQL Process in the Processing>Processes section of Page Processing and it seems to work fine now. The only downside to this method is if the name of a Page Item is changed the code will also have to be changed. Other than that i have had no problems.

To Move Multiple Files from one directory to another.

Hi,
I need to move multiple files from one directory in UNIX (application server ) to another. I need something like an FM 'STRALAN_COPY_FILES' which is also valid in ECC 6.0.
Thanks in advance.

Hello Sachin
Below you see a copy of how to use EPS_FTP_PUT using transaction SE37.
Import parameters               Value
RFC_DESTINATION =                 NONE
LOCAL_FILE             =         filename
LOCAL_DIRECTORY   =              /dir1/dir2
REMOTE_FILE             =        filename
REMOTE_DIRECTORY   =             /dir1
OVERWRITE_MODE        =          F        " force -> overwrite existing file
TEXT_MODE                    =   B               " binary
TRANSMISSION_MONITOR            X       " display transmission monitor
*RECORDS_PER_TRANSFER            10
*REQUESTED_FILE_SIZE             0
*MONITOR_TITLE
*MONITOR_TEXT1
*MONITOR_TEXT2
*PROGRESS_TEXT
*OBJECT_NAME
Regards,
Uwe

Moving multiple queries from one category to another in QM

Hi All,
Is there is any way of moving multiple queries from one category to another in the query manager?
Or is the only way of doing it by saving each one individually into a different category.
Any ideas ?
Regards,
Rakesh N

Hi Rakesh,
The query manager has limited function compare with normal file management applications. Under current design, you have to do this one by one. You just need to make sure move the smaller amount of queries to large category. Category name can be changed easily.
Thanks,
Gordon

HT1347 How do I run two libraries from one computer?

How do I run two libraries from one computer? One library is on the computer's hard drive, the second library is on an external hard drive. The computer that had the external hard drive crashed and I need to fix the iTunes library on it. How can I do this without corrupting the library on my internal hard drive?

Launch iTunes with the Shift key held down and either create a new library or choose the one on the external drive. Any rented movies downloaded from another computer won't play.
(81212)

Scenario of multiple Asset from one AUC/WBS

Hello,
I am having a requirement, where I need to create multiple Asset from one WBS. I checked in the system and able to create more then 1 Asset for WBS.Also if I maintain the distrubution rules for those Asset then settle it accordingly to different Assets.
I just wanted to confirm, will it we the right way of handling this scenario? My main concern is this involves intervention of user for maintaing the settlement rule during final settlement.
Is there any other way to handle this scenario?
Thanks
Sarang

Hello Virendra,
I am not using Investment Managemnt. What do you mean by IM profile?
I understand that I need to maintain the source of cost in Source structure. But even in that scenario the user has to go and maintain settlement rules and create multiple Asset against one WBS.
So how do I tackle it, if client requirement is such that they want to create only one AUC, but during final Asset creation they want to create multiple Assets from one AUC. They dont want to have WBS for each Asset.
Thanks
Sarang

Creating multiple links from one map image in Flash CS4

I have been tasked with creating multiple links from one map image using flash. Each link would go to the main website page with that location. I assume I could create a button for each location on the map but not having a lot of experience any help / tutorial you know of would be super helpful.. Thanks! Not looking for someone to work me thru it but a little guidance would be great!

If I was to answer the problem, I would be giving you what you asked not to be given... the solution. So I'll suggest that you start by researching the getURL() function. That is what AS2 uses for opening web pages.
As for coding a button, I'll recommend the following article for you... it will explain the proper approach to coding a button, which will give you an advantage over others who don't follow it, but instead use the way the article says not to.
http://www.adobe.com/devnet/flash/articles/as_bestpractices_04.html
Google is one of the best resources available for learning how to do things with Flash--it's the first place I go when I have a wondering. In general, if you type in the right keywords, you get fairly good search results. In your case, combinations of "AS2", "button", "getURL", "tutorial" would probably work well.

Passing Multiple rows from one external webpart list to another

Hi Folks,
I have almost spent 1 week looking into this without any success. I have an external list "List A" (in a webpart) with one of the columns as "State".
Another external list "List B" (in a webpart ) has state and user as columns. In some case I want to pass 1 state and in another I want to pass multiple state. Passing one state from List A to List B works fine. But Multiple state does
not work because the webpart list has the property "Send First row to connected web parts when page loads". If I disable this option then the web part does not pass anything. Is there a way to pass multiple rows from one Webpart
external list to other?

http://www.sharepointanalysthq.com/2010/07/bcs-external-list-limitations/
No Lookups
Unfortunatly the only thing that you can do a look up on in an external list is on the ID column, anything else and you are out of luck.
http://social.technet.microsoft.com/Forums/en-US/615771a0-ba78-4e38-9e2d-ded0204173ba/external-list-referenced-as-sharepoint-lookup?forum=sharepointgeneralprevious
Try below webpart. it should help
http://www.sparqube.com/SharePoint-Lookup-Column/
If this helped you resolve your issue, please mark it Answered

Can i run multiple monitors from time capsule?

Is it possible to run multiple monitors from a single time capsule in our small office (3 users)?

My understanding is that you have the ability to. However, you might end up with a slow server.

HT4505 I have 4 accounts on my Mac Pro running Mavericks. From one account I can scan with my Epson NX420, but the other three accounts do not see the scanner. Can print from all accounts.

Sorry, I was not given the option of posting to a Maverics community. I have 4 accounts on my Mac Pro running Mavericks. From one account I can scan with my Epson NX420, but the other three accounts do not see the scanner. Can print from all accounts.

Hi there Ira Fletcher,
I would recommend taking a look at the troubleshooting steps found in the article below. Note: While the article was written for printer issues, many of the same troubleshooting steps apply to scanners as well.
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
-Griff W.

Lightbox -- Multiple photos from one thumbnail?

What I want to do is create a lightbox that launches a set of multiple photos from one thumbnail. Is this possible? All I have been able to do is create a lightbox that display's all of it's contents as thumbnails on my page. I am creating a portfolio page and I want each project's images to launch from one thumbnail. All of the projects would then be able to appear on one page. The work-around of course would be to make a separate page for each project, and make a lightbox within each one of these pages. Any solutions for this? Thanks!

You can achive this by combining the Composition Lightbox Widget with the Slideshow Widget.
01. Add Lightbox Display widget from the Composition section in the Widget Library
02. For each small grey box (the Trigger) add your thumbnail
03. In the larger grey box (the Target) add your Slideshow Widget (anyone you'd like from the Widget Library)
04. Replace images with the images you want for your slideshow
05. Preview

Run multiple VI from one VI...

Similar Messages

Maybe you are looking for