Run Option disabled in Repository Reports

I am using a fresh install of Oracle 9i 9.2.0.1.0 on XP Pro and Designer 9i 9.0.2.7. Everything functions perfectly until I attempt to run Repository Reports. The Report Navigator responds and I can select the container and diagram for a report, however the run button and options are disabled. Regardless of what report I attempt to run I cannot get the run option to be enabled.
Any ideas?
Thanks.
Keith

Keith,
Do you have Oracle Reports installed on the same machine? You need this to run the repository reports. You can check by running the Oracle Universal Installer and clicking the Installed Products button then navigate down the hierarchy.

Similar Messages

Error running Table Definition (cktci) Repository Report in Designer 10G

Hi
There seems to be some internal limitation when running the Table Definition Repository Report (cktci).
We have over a thousand tables defined in Designer and if I try to run the report for all tables it falls over with the reports.log saying
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-271504897: Error executing CA utility.
REP-3335: Unhandled Internal CA Error.
caxml 2
REP-0002: Unable to retrieve a string from the Report Builder message file.
REP-271504897:
Not very useful information.
If the report is run using a smaller subset of tables. For example if I use a parameter of A% for the table name then it works OK.
I have been able to create reports up to about 600 pages but after that it falls over. So if I try to run the report with a parameter like S% it will fall over.
Just wondering if anyone else has come across this issue and found a fix.
There is the obvious workaround of running the report for smaller subsets of data but we would like it to be able to run for all tables if possible.
Any feedback appreciated.
Regards,
Adrian

Sorry for the slow reply. I've been trying a number of different things to get this to work.
I reinstalled Developer as suggested but we don't have a patched version so there were no additional patches to apply. I re-ran the installer anyway to see if it would update anything.
I couldn't find any reference to Developer patches that might fix this issue in metalink.
I also tried messing with the JVM options to give it more memory etc but that didn't help.
After using the Designer diagnostics trace I got the arguments it uses to run the same report from the command line.
This resulted in the same issue. So at least it was consistent from Designer as well as the command line.
This suggests it is a reports issue rather than Designer.
Running the reports trace didn't provide any extra information. Found a bug that suggested changing any formula columns to not return NULL.
Tried updating the report to fix that too but no joy.
I will post here if I discover the solution.

List- Export- Spreadsheet option disabled in ALV Report

Hi,
In one of the ALV Report the option List->Export->Spreadsheet option is disabled. How to enable that option?
I am calling the REUSE_ALV_GRID_DISPLAY Function module with the following parameters
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        i_callback_program = w_repid
        it_fieldcat        = i_fieldtab[]
        is_layout          = ls_layout
        it_events          = i_events[]
        i_save             = 'A'
        is_variant         = i_variant
      TABLES
        t_outtab           = it_display
      EXCEPTIONS
        program_error      = 1
        OTHERS             = 2.
This is the problem with only this report. So I believe it is not due to authorization.
Regards,
Anusha

Hi Anusha,
This link should help you. You just need to change the deep structure.
[Export Option is Grayed out in ALV Grid Display;
You already figured it out
Edited by: sap_wiz on Jul 6, 2011 4:42 PM

Error REP-0999 using Repository Reports

Hello !
I have problems with Repository Reports tool from Oracle Designer 6i. I want to save a previewed reports in RTF format, but when I use the command "generate to file" of the previewer, I get an error REP-0999 (unimplemented error with no more explanations). Im using Oracle Designer 6i in version 6.5.52.1.0 and Repository Reports in version 6.5.52.2.0.
Maybe I dont have a requested module, where can I get it ? can anyone help ?
thanks in advance,
regards,
Sylvain

Hi Sylvain,
I'm having similar problem. When I'm trying to run any of the Repository report it is moaning saying REP-0736 There are uncompiled program units. After compiling thry Report builder I get ORA-600 error but not able to successfully run any report. Wonder why ?
I'm having same versions as yours.
Regards
Nitin Hi !
My problem occurs when I try to generate a previewed report to a RTF file. At the same time, the "Report Builder" menu item from the "run" menu is disabled. Maybe I have to install Oracle Reports ? should I download it from Oracle web site ?
Have a good day,
Sylvain

Disable standard print option in the classical report

Hi,
I want to disable the standard print option in my classical report. How can i do that? Thanks in Advance.

Yes it will come.
Go to SE41. Create a Status say ZSTAT. In that assing some function code
to print icon in menu bar say 'ZPRINT'.
When you are done with this. Go to your program and insert following line after START-OF-SELECTION.
SET PF-STATUS 'ZSTAT' EXCLUDING 'ZPRINT'.
Then you will get disable icon for printer icon.
hope this helps you.
Enjoy SAP.
Pankaj Singh

Report execute time nd how many records will be returned before hitting the "run" option?

Post Author: Prasad15
CA Forum: WebIntelligence Reporting
Is there any way to know how long the report executes and how many records will be returned before hitting the "run" option?
Regards
Prasad

To know if the report is going to return more than 10,000 records, you first have to run the query with a 'select count(1) from ... where ...' (with the same from and where clauses as you normal query). Since this takes about the same time as runnng your report, I wonder if you really gain anything (although formatting may take some time too).
You may simplify the select count(1) query by omitting all the lookup tables that are only needed for formatting. That way your query may run a lot faster. You can put this in your after parameter form trigger.

Run Options In Reporting

Run Options In Reporting
I'm trying to create a custom report to automatically produce output in excel format; however, when it runs it defaults to HTML. When you click "Run with Options", the only 2 format options are HTML and PDF. Is it possible to show excel as an option or is it a limitation in the RequestCenter/Cognos implementation. I've seen this option available in other Cognos environments not related to RequestCenter. Please see attachment.

You are correct, Liz. This Cognos option was not incorporated by newScale into the RC06 or RC07 reporting implementation. It is being incorporated into the RC08 reporting.

Repository report just hangs when run!

I am running Developer 9.0.2.80.6 on Windows XP. I've installed 9i database and development tools.
I was able to build a ER diagram in Designer, and now I want to report on it. I go into Repository Reports, select a report (something simple like "attribute definitions", I give it a container name, an entity name, the name of my er diagram, and then when I click on the 'run report' button, nothing happens. I've given it plenty of time to do something, but nothing ever happens. Eventually I use task manager to shut it down (it says its not responding).
Any help is much appreciated!!
J

Thanks Shirish, but there's no file output at all.
I've also noticed that it leaves the process 'RWRUN.exe' around until I kill it or shut down.
I also tried running a report via Reports Developer and that one worked fine.
Does anyone know just which servers/processes need to be running in order to run these reports? I wonder what I'm missing. It is rather critical, as I'm developing a system for a client and this client requires a number of reports from Designer!
J

Repository Reports feature is disabled

Hello All,
I am using Oracle Repository for performing SCM. However the Repository Reports feature in the SCM client is always disabled. Can anyone please tell as to what other components need to be installed so as to avail of this feature?
Regards,
Sushant P. Lotlikar.

Vishal,
Thanx for your reply. However, the problem has not yet been solved.
I have 3 ORACLE HOMES on my machine.
OraHome81 - contains the Oracle database server (ver 8.1.7.0.0)
d2k_home - contains Developer 2000 suite. Currently, I have only installed Oracle Forms 6.0.8.13.0 in this home
repository_home - contains the Oracle repository client.
I have installed Oracle Reports 6.0.8.11.3 component of the Repository Client Installation in RESPOSITORY_HOME on my machine. However, the Repository Reports feature in the RON (Repository Object Navigator) is still disabled.
Thanx for help.
Regards
Sushant P. Lotlikar

Is there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly?

Greetings everybody,
I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
I just launched a new website where I sell products with certain variations, for example please view this link: http://www.finerribbon.com/aegean-single-face-satin-ribbon.html
On this particular product, the product variants are supposed to work in such a way where:
If you select the value "1/8" from the "Choose Ribbon Width" field
THEN
The only options active and available to choose from in the "Choose Roll Size" field should be: 500 Yds, 20 Yds & Sample Swatch
Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem where all the options are available regardless of the values chosen, basically the above functonality does not work.
I was told that there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly, is this true? Can anyone advise me if there is a solution to this problem? I would sincerely apperciate it.
Thank you very much for your time and help!

Hi...
I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem
At the top of this window you'll see the following:
Apple Support Communities > Mac OS & System Software > Safari > Discussions
This the Safari forum for the Mac OS X.
Better that you post your topic here > Developer Forums: Apple Support Communities
I do see on my iPad what you are rreferring to. But you shoudl get the feedback you need in the developer forum.

Designer 6.0 Repository Reports and PL/SQL Error ORA 6505

Trying to run some Repository reports give error
REP-1401 'cf_desc_textformula'. Fatal PL/SQL error occurred.
ORA-06505: PL/SQL: variable requires more than 32767 bytes
of contiguous memory
Occurs at e.g. ckentdef Seems to be that Reports has Problems
with the Entity Descriptions and Notes in the repository...
The Database Characterset is US7-ASCII
Any Ideas?
Michael
null

Hi, I4m not sure, but maybe it works,in WHEN OTHERS zone, to make commit after the insert in the table where you want the errors to log. You can make commit in a trigger if you specify in the declaration zone of the trigger:
PRAGMA AUTONOMOUS_TRANSACTION;

Repository report don't function - cannot find C:\....\Temp\...file.html

help me

I ran the report using navigator--->repository reports.
This report gets generated as *.html file into your c:\document\username\local\temp folder.
Try running it again and ckeck for the report file name to locate the folder. The file name starts with ck*
Good luck
Shirish Gadkari

EXPLAIN PLAN option disabled

Hi,
When I take an Explain Plan using TKPROF it gives the following error:
Error in CREATE TABLE of EXPLAIN PLAN table: APPS.prof$plan_table
ORA-00955: name is already used by an existing object
parse error offset: 18
EXPLAIN PLAN option disabled.
And the Explain Plan is snot displayed in the o/p file for all the queries.
Can any one help me on this.
Thanks,
Kiran

Hi kiran
When I take an Explain Plan using TKPROF it gives the following error:
Error in CREATE TABLE of EXPLAIN PLAN table: APPS.prof$plan_table
ORA-00955: name is already used by an existing object
parse error offset: 18
EXPLAIN PLAN option disabled.
********************************************************************************What is your Db verssion and EBS? What is your kprof syntax. By the way please check those doc adn see its helpful:
Run Adadmin To Recreate Grants And Synonyms ORA-20000 ORA-00955 In Synonyms Loop:create_synonym(GL,PLAN_TABLE,APPS,PLAN_TABLE) [ID 437714.1]
TKPROF With Explain Fails With ORA-00903 invalid table name [ID 257294.1]
OERR: ORA 955 is already used by an existing object [ID 18549.1]
Also check:
Re: TKPROF and Explain Plan
Regard
Helios

Repository reports cannot generate HTML report

Hello
In our Computing Labs, we have Oracle9i Designer installed on Windows XP Professional.
Our students are having a problem when they try to Run Report in Repository Reports.
The student first sees an error message for Internet Explorer that says "Cannot find "file:///c:/docume~1/%username%/LOACLS~1/Temp/ck*.tmp.html". Make sure...". %username% of course being the current user and ck* being the filename of the report.
If the user examines the contents of ~/Local settings/Temp, they will see that when this error message comes up, there is a file ck*.tmp (no HTML extension). The HTML file is never generated though.
When the user click on the OK button for the error message, Internet Explorer open to a blank page. When IE is closed, Repository Reports posts a message that says "CDI-21309: Unable to delete file c:\docume~1\%username%\locals~1\Temp\ck*.tmp.html". When the OK button from this message is clicked the user is returned to Repository Reports, but the report is never generated.
Our users are set up as Dynamic Local Users, and are members of the Power Users group. We do have some pretty tight restrictions on Group Policy.
When a user who is a member of Administrators (also dynamic local user) logs in and attempts to create a report, (s)he has no problem. Repository Reports functions exactly as it should.
I have already given Power Users complete access to all files on the hard drive, so I don't think it could be an NTFS file permission issue.
If anyone has any advice, it is certainly welcome. Our students need to be able to print off these reports for classes, and I am not familiar at all with Designer.
Thank you very much
David Summers
University of Idaho ITS
Student Computing Labs

Here is how I resolved my problem with non admin users not being able to run reports.
Designer 9i ver 9.0.2.80.6
Repository Reports ver 9.0.2.80.4
Problem - When non Administrator users try to generate a report in Repository Reports, they either get a file not found error for the HTML report (and IE will not show the report) or Repository Reports stops responding (and rwrun.exe has to be manually killed).
Fixes
-%TMP% and %TEMP% environment variables must resolve to paths that are fewer than 30 characters. In our environment (WindowsXP with Novell Dynamic Local Users), %TMP% and %TEMP% were the temp folders in the user's profile, which is a long path. Changing the environment variables to point to c:\temp was one step in resolving the issue. Although there is a patch released related to this, my installed version is post-patch and I still had to change the temp environment variables.
-HKLM\SOFTWARE\ORACLE\HOME0\REPORTS_TMP must be set to a writable area for the user group using Designer and Reports. In our environment it was set (during install) to the local administrators temp space (in administrators local profile) - I'd guess it gets set to whatever %TMP% or %TEMP% is for whichever user installs the application. Our users cannot write to this folder, so setting this registry value to c:\temp was another step in resolving the issue.
-c:\OraHome1\reports\logs must be writable for whichever user group is running Reports. Before making this change but after making the previous two changes, reports would simply freeze for Power Users. When trying to log off, rwrun.exe had to be manually killed - and sometimes a Dr Watson report would come up and ask to be sent in. By granting the user group that uses Reports write permissions to this folder (or the equivalent in your environment), Repositry Reports no longer freezes and successfully generates the HTML report.
David Summers
University of Idaho ITS
Student Computing Labs

JavaScript: Disabling textarea in report column cell depending on flag

Hi,
I got an updateable report with the following behavior:
- Depending on the value of column "PFT_PCODE" (1 or 2) the column gets a yellow or red background color.
- If the value of column "PFT_PCODE" is 1 the next column (for remarks) gets a grey background color.
- Some flags get values set.
With the kind help of Andy (ATD) I got that running nicely. See also:
Javascript - Referencing report column value and
JavaScript: Disabling textarea in report column cell
Now I want to add an additional feature:
- If a flag ('P11_SPERR_FLAG') has the value '1' then the column (remarks) (var j) should be disabled.
I tried the following (see additional code between asterisks) but it's not working. I feel a little stupid since I thought that shoud be an easy fix.
Anyone has an idea what's wrong with the additional code? I find debugging quite difficult in JavaScript...
////////////////// PAGE HTM HEADER //////////////
function hilite(f1) {
var ft1 = document.getElementById('P11_FEHLERTYP1_FLAG');
ft1.value = '0';
var ft2 = document.getElementById('P11_FEHLERTYP2_FLAG');
ft2.value = '0';
*var sperrflag = document.getElementById('P11_SPERR_FLAG');*
var h = 0;
if (document.getElementById(f1)) {
     h = document.getElementById(f1);
     var t = h.parentNode;
     while (t.tagName != 'TABLE') {
          t = t.parentNode;
     var rows = t.rows;
     var k;
     var i;
     var j;
     var c;
     var headers = t.getElementsByTagName("TH");
     for (k = 0; k < headers.length; k++) {
          if (headers[k].id == f1) {
               c = k;
     for (k = 1; k < rows.length; k++) {
          i = rows[k].cells[c];
          j = rows[k].cells[c+1].getElementsByTagName("TEXTAREA")[0];
          *if (sperrflag.value == '1') {*
*               j.disabled = 'true';*
          if (i.innerHTML == '2') {
               i.style.backgroundColor = 'yellow';
               i.style.color = 'white';
               i.style.fontWeight = 'bold';
               i.style.fontSize = '18px';
               ft2.value = '1';
          if (i.innerHTML == '1') {
               i.style.backgroundColor = 'red';
               i.style.color = 'white';
               i.style.fontWeight = 'bold';
               i.style.fontSize = '18px';
               j.style.backgroundColor = 'grey';
               ft1.value = '1';
               //j.disabled = 'true'; //This would work.
////////////////// REGION FOOTER //////////////
<script type="text/javascript">
hilite('PFT_PCODE');
</script>Thank you,
Roger

I found the solution, it had nothing to do with JavaScript:
Item P11_SPERR_FLAG was of type Diplay as Text / Doesn't save state.
Without saving state the JavaScript wouldn't work.
Sorry to bother,
Roger

Run Option disabled in Repository Reports

Similar Messages

Maybe you are looking for