Run plan with SCO only

Hi,
How do we run an ASCP plan with SCO only (No MBP, No HLS)?
I think a profile option has to be created for that.
I want to know the details for this profile option so that I can create and test the plan.
Is there anything else which needs to be done for SCO-only plan?
Regards

Siri requires internet access, which can be with an available wi-fi network.

Similar Messages

Run Report with Pass Number and Varchar Lexical Parameter values

Dear Sir/Madam
Due to an urgent change required to a report I would most appreciate it if you can please advise me if it is possible to get this report working by either passing in multiple lexical parameters or one signle lexical parameter when calling the SRW.RUN_REPORT command with the following methods:
Firstly: When calling report with a run_no and spr_cd passed in through one lexical:
cmd_line: REPORT=D:\DEV\REMITTANCE.rdf BACKGROUND=YES BATCH=NO DESFORMAT=PDF DESTYPE=FILE DESNAME=D:\DEV\REMITTANCE.pdf
CP_L_PARAM=RUN_NO=TO_NUMBER(28) AND SPR_CD=SUPP1
Both with a TO_NUMBER and without, whereby I attempt to do a SUBSTR within the query of the called report to derive the RUN_NO Oracle Reports fails to accept the SUBSTR.
Secondly: I am now trying to call the with passing two lexical parameters into the report as follows:
cmd_line: REPORT=D:\DEV\REMITTANCE.rdf BACKGROUND=YES BATCH=NO DESFORMAT=PDF DESTYPE=FILE DESNAME=D:\DEV\REMITTANCE.pdf
CP_L_RUN_NO=||TO_CHAR(lv_run_no)|| CP_L_SPR_CD=||lv_spr_cd;
NOTE: The above is an output of the actual command line and not what is passed into the command line, thus the quotes are missing. Please also note that the report is running fine with the only a hard coded RUN_NO value PASSED without the SPR_CD.
Unfortunately this is also causing issues as the RUN_NO is a number and as you know you can only pass in strings.
Your urgent help is required on this matter please as our client is expecting a solution this afternoon.
Hope to hear form you soon.
Kind regards
Andrew Mason

Dont Worry I've worked it out...

Have family plan with 250 data which I almost use each month. Going on vacation and will be on the road for two weeks. Should I up my data for a month then change back. Is it worth it or should I just run over and pay the extra 15 per gig?

have family plan with 250 data which I almost use each month. Going on vacation and will be on the road for two weeks. Should I up my data for a month then change back. Is it worth it or should I just run over and pay the extra 15 per gig?

Hello mlazaretti. Vacation time is awesome. (Especially a road trip!) Since you will be going out for two weeks, you never know if having extra data may come in handy. I highly recommend switching to the next tier up so this way you have more data. This way it is only $10.00 more versus $15.00, and you dont have to worry about overages. Then change back at the start of the next billing cycle.
If you need help making this change let us know! Have a safe trip!
NicandroN_VZW
Follow us on twitter @VZWSupport

Problem with full backup with copy only in maintenance plan sql server 2008

Hello
I am starter DBA for sql server in general
I have problem related to backup with maintenance plan in sql server 2008 and 2008 r2
I created maintenance plan to take full back up with copy only option checked, but when I check the back up in backupset table is_copy_only column it shows 0 for databases that I run job for.
I did the same steps on sql server 2012 and I checked backupset table is_copy_only column it shows 1 for databases that I run job for .so it works as it should be
Note: all the servers I mention here are production servers

Copy-only Backup by using GUI ( SSMS) in SQL Server 2008 but it was not available in Maintenance Plan "Back
Up Database Task". Now in SQL Server 2012 It is included in "Back Up Database
Task".
http://sqlage.blogspot.in/2013/06/dba-maintenance-plan-back-up-database.html

I want to buy iphone 5s gold im from india but i dont want any plans with them can i get only iphone please reply me fast i want to buy this iphone fast as i can

I want to buy iphone 5s gold im from india but i dont want any plans with them can i get only iphone please reply me fast i want to buy this iphone fast as i can

http://www.apple.com/in/iphone/buy/
These are your options

How to run a plan (once and only once) by clicking on a button ?

Hi all,
I've been using Oracle BAM 10.1.3.3 on a project and my customer is now asking for the following feature:
He would like to manually launch a plan (once and only once) by clicking on a button of a web page.
In my opinion a possible way of implementing this scenario is:
create a new alert which "Event" set to "When this rule is launched" and Action set to "Run a Plan". In addition I should copy the alert URL and paste it on the page, anytime the final user clicks on that link the alert will be launched and the plan will be run.
Is that correct? Otherwise could you please give an advice?
Thanks a lot in advance for your help.
BR Fabio

Hello there!
There are lots of online resources available at www.ni.com that will be able to help you, as well as the available resources in LabVIEW such as the LabVIEW Help and the Find Examples options under the Help tab.
Obviously, none of these will do the whole project, but will be relevent for different parts of it.
The link to the online LabVIEW manual is here and the part most relevant to yourslf when starting a block diagram is here.
As a guideline, the examples are a very very useful guide on good-practice programming as well as problem solving and introducing you to the different functions available.
Another very useful link is the NI Developer Zone, from where you will be able to access Tutorials on thousands of features.
I hope this helps!
Liam A.
National Instruments
Applications Engineer

BR0083W Compression rates out of date - run BRBACKUP with option '-k only'

Hi,
I am getting backup warning in offline backup. i am attaching error log.
BR0280I BRBACKUP time stamp: 2009-09-21 14.41.55
BR0319I Control file copy created: /oracle/KBP/sapbackup/cntrlKBP.dbf 9388032
BR0083W Compression rates out of date - run BRBACKUP with option '-k only'
OS = IBM AIX
DB = oracle 10g
kindly do the needful
kvl

Dear KulandaivelS,
Try this command.
"brbackup -k only"
Also check this [Link|http://help.sap.com/saphelp_45b/helpdata/EN/0d/d30b734a0c11d182b80000e829fbfe/content.htm]
Regards,
Bhavik G. Shroff
Edited by: Bhavik G. Shroff on Sep 21, 2009 2:39 PM
Edited by: Bhavik G. Shroff on Sep 21, 2009 2:44 PM

Strategy plan with package to be executed only once

Hi All,
Created a time based maintenance plan with strategy. Included 4 maintenance packages in the strategy. One of the maintenance package should be executed only once upon scheduling the maint. plan and should be due on the date on scheduling.
What scheduling parameters are to be maintained?
Regards,
Abhijit

Hi Abhijeet,
The Functionality of Offset is actually different.
Suppose you procure a new Equipment, you have erected and comissioned, but the use will anly after 3 months as the predessing and subsequent Equipment needs some time for the Erection and comissioning, in this case, you maintenance plans should start after 3 months only,
for this reason the Offsetting Field is used.
that is if you maintain the offseting of 3 months then the cycle will start after 3 months.
it means that if today is 20th December and you have a cycle frequency of 1 month and you give the offseting for 3 months then your plan will be only activated from 20th march,and the first order will be generated 1 month(cycle period) after that.
that is 20th April.
Hope it further clarifies your doubt.
Regards,
Yawar Khan

Running with Smartband only

Hi everyone,
I know others have posted about this, but I can't find an answer to my specific problem...
I went running today, with my Smartband only, leaving my phone at home. When I got back LifeLog showed my run, down to the closest minute, but then when I went back on an hour or so later the run had disappeared, it's still showing my steps but the running value is down to 0. Does anyone know why this may happen?
Thank you in advance!

I'm still struggling with this, tried resetting it etc and it's still the same. Did a 20 minute jog today, at 12pm I took a screenshot and the running had tracked, by 12.23pm it has disappeared. I'd not disconnected my Smartband or anything. My partner still has the same problem with his smartband and phone. I've noticed that my Smartband will only connect with Bluetooth, when I turn it off and try to connect with NFC only my phone turns Bluetooth on automatically. Could that be affecting it? Thank you all for your help once more.

KP26_intergration with excel Plan Activity can only change some period

Dear Expert,
We use kp26 intergrate with excel, when uploading Plan Activity can only change some period. (Uploading is successful)
So, we've used same Layout and change data in KP26 directly for testing.
(Only period 1,2,11 in 2010 can be changed, other periods remind the same)
Second testing, we've change data in period 3-10 & 12, and it showed the following message.
***No planning data has been changed
Message no. K8038
Diagnosis
You used Post. While preparing the data for posting, the SAP System determined that no changes were made in the available databank values.
System Response
A posting activity price is not necessary.***
It's quite doggy. Plz help.
Thanks

Hi
How about using an LSMW? I always prefer to use it and find it very comfortable as compared to Excel
Regards
Ajay M

Cannot run ms safety scanner or fix it with firefox only save button shown

when I switched from IE to Firefox none of my ms safety scanner or fix it programs will run
There is no option to run as with IE and I have tried over and over to locate them in files and run but no work
I have to keep switching back to IE to get them to work even with anti virus off

All Microsoft Fix It files are executables. For security reasons, you can't directly run programs. You can only save them and run them manually.
By default, files are saved to your Downloads folder. If you put them somewhere else, you can locate them in the Library, Downloads section. See the following article for details.
* [[Find and manage downloaded files]]

Can I use my iphone 5s with wifi only if I don't have a cell phone plan

Can I use my iphone 5s with wifi only if I don't have a cell phone plan

Yyou will need a SIM card to activate it.
It does not have to be an active SIM card.
Once you have activated it, it should work just fine.

How can I create a new Care Plan with one or more care tasks

Hello,
I'm working on a Dutch website in the HealthVault Environment. I got difficulties in creating and updating a careplan with care tasks. Most likely it's due to lack of knowledge...
Following code works fine:
CarePlan plan = new CarePlan();
plan.Name = "test";
this.PersonInfo.SelectedRecord.NewItem(plan);
It creates a plan called [test]. But I don't know how to create a plan with one or more tasks in it: the tasks property is read only.
https://msdn.microsoft.com/en-us/library/microsoft.health.itemtypes.careplan.tasks.aspx
Half a year ago I was able to add an example of a careplan, which was a feature of the dev tools, but for some reason that's not possible anymore.
https://developer.healthvault.com/DataTypes/Overview?TypeId=415c95e0-0533-4d9c-ac73-91dc5031186c
So my question is, how can I add a new care plan with a task like the example from the HealthVault dev tools:
<tasks>
<task>
<name>
<text>Run 100 miles</text>
</name>
<description>Run 100 miles in 6 months</description>
<start-date>
<structured>
<date>
<y>2013</y>
<m>12</m>
<d>1</d>
</date>
</structured>
</start-date>
<end-date>
<structured>
<date>
<y>2014</y>
<m>6</m>
<d>1</d>
</date>
</structured>
</end-date>
<target-completion-date>
<structured>
<date>
<y>2014</y>
<m>12</m>
<d>31</d>
</date>
</structured>
</target-completion-date>
<sequence-number>279128532</sequence-number>
<recurrence>
<interval>
<text>Once</text>
</interval>
<times-in-interval>10</times-in-interval>
</recurrence>
<reference-id>p01vil21ckg7k2346y1g60337mmi20sg564l321l8pmpqev39n302572sewu76lh9019s3993e02924</reference-id>
</task>
</tasks>
Any help is welcome
Wilfred

Hi Wilfred,
Have you tried this?
CarePlan plan = new CarePlan();
plan.Name = "test";
plan.Tasks.Add(someTask)
If you have a task list already, you would need to enumerate through it and add one by one...
foreach (var task in existingList)
plan.Tasks.Add(task)

Workbook not refresh after running Planning Function (BI-IP)

Hi! Folks,
I have a problem with the Bex Analyser which not refresh the data after running Planning Function.
Step 1: Run Planning Function (There are some changes in records)
Step 2: I have to Run Process Variables again and input the same selection in the pop-up variables
Step 3: The changed records will be shown...
Can I have some coding in the Layouts of Bex Analyzer to refresh the data after running Planning Function?
Brgds,
Supasake

Hi,
I had a similar problem that the resuls of my planning function were not automatically shown. Only if I did "something else" like saving or running another function the results were displayed.
I think I solved it by upgrading my SAP GUI6.4 with patch 14. the results of planning functions should be automatically displayed.
D

MRP Run - Planning file entry Issue

Dear All,
We are facing one problem in MRP Run. We run MRP in the background for a plant (MDBT) System is not creating planned order for few component. I have checked all relevant setting. I found that planning file entry is missing. I would like to know that how system can miss the material? How system creates & delete planning file entry ? I have some data related to this.
Last MRP run date is 22-04-09
PIR changed date on 30-04-09
MDRE Run on the 30-.4-09 at night.
MRP Run on 02-05-09 at night.
Problem reported that no planned order for the material on 07-05-09.
We have huge number of material so its difficult to check all material individually whether MRP run happend or not ?
Please let me know the possible reason for this.
Thanks & Regards
Kundan Kumar

Dear,
If you carte materaial or uplod materail before activation plant for MRP this may be the cause for this.
Planning File creates all the materials relevant for the planning run.
The planning run and the scope of the planning run (which materials are planned in which planning run) are controlled by the planning file.
For planning file entry use the following transactions,
MD20 : Create planning file entry
MD21 : Display planning file entry
MDAB : Set up planning file entry in background
MDRE : Check planning file entry Please run this in it will solve your problem
All materials assigned with MRP are automatically entered in planning file entry.
Depends on changes in material planning or in proposal , system will create planning file entry.
When MRP run system will consider only which materials having entry in above contents of planning file entry. After MRP run system delete the planning file entry. And again material gone the changes like GI GR on any other demand then system generate planning file enty again.
Hope it will help you to understand basic concept.
Regards,
R.Brahmankar

Run plan with SCO only

Similar Messages

Maybe you are looking for